SEDA Chain

This repo contains the our blockchain layer, written with the help of the CosmosSDK.

To learn how to build a local version, please read developing. To learn how to contribute, please read contributing.

Dependencies

Our node currently doesn't rely on any runtime dependencies.

Installation

There's a few different ways you could install and run the node.

Download From Releases

To download from our Github releases page.

NOTE: The repo is currently private and this requires Github authentication. You'd have to make authenticated requests to the Github site. You can add the following to the flag to the curl command -H "Authorization: token YOUR_TOKEN". To learn more please read Github's guide here.

1. Now on your machine run: curl -L -O https://github.com/sedaprotocol/seda-chain/releases/download/${SEDA_CHAIN_VERSION}/seda-chain-${SEDA_CHAIN_VERSION}-linux-${ARCH}
   1. Replace ${SEDA_CHAIN_VERSION} and `${ARCH}`` with the version and architecture you want. You can find a list of versions and supported architectures on our releases page linked above.
   2. You can also add .tar.gz if you want the tarball instead of the binary directly.
   3. You could also right click copy url for the file you want to download.
2. Download the checksum file: curl -L -O https://github.com/sedaprotocol/seda-chain/releases/download/${SEDA_CHAIN_VERSION}/sha256sum.txt
3. Check the checksum of the file. sha256sum --check --ignore-missing sha256sum.txt
   1. Should output something like: seda-chain-${SEDA_CHAIN_VERSION}-linux-${ARCH}.tar.gz: OK
4. You'd then want to add the binary to your path.

Build From Source

Please check out developing.

Docker

If you have docker installed you can download the container from the Github container registry found here.

NOTE: The repo is currently private and this requires Github authentication. To learn about this process please go here.

Pulling the Container.

Steps:

1. docker pull ghcr.io/sedaprotocol/node:latest
   • Or view above link for other tags.

Running the Node

This is a guide for operating and running the node.

• Individuals aiming to connect to an external node with Seda.
• Those who wish to establish their own node and/or set up the node as a validator.
  • Without Docker
  • With Docker

seda-chaind, is the command-line tool for interfacing, or CLI for short, with the Seda blockchain. You can check out the installation instructions here.

Now, you're all set to engage with the Seda blockchain via an external node. For a rundown of commands, type seda-chaind --help. For in-depth info on a particular command, add the --help flag, for example:

seda-chaind --help 
seda-chaind query --help 
seda-chaind query bank --help 

Linking to An External Node

This section is for those linking to an external node, so if you want to run commands from your local machine, or don't feel like running a node yourself you can use the seda-chaind binary to connect to an external node. This can be done two ways:

1. Add the --node flag to your CLI commands, followed by the RPC endpoint in the https://<hostname>:<port> format.
2. Alternatively, set a default node: seda-chaind config node https://[hostname]:[port]

NOTE: When connecting externally, choose a trustworthy node operator. Unscrupulous operators might tamper with query outcomes or block transactions. The Seda team currently supports these RPC endpoints:

• Testnet-seda-node-1: http://3.10.185.200:26657
• Testnet-seda-node-2: http://35.179.10.147:26657

Running the Node Yourself

How to run the node without docker coming soon.

Running the Node Yourself Dockerized

For instructions how to run the node yourself as a normal node or a validator in docker.

To pull the docker image check here.

This section will go over:

• docker commands
• Setting up env variables for docker

Docker Commands

Here's docker commands to show running the node, and executing commands so you can generate a key, and become a validator.

Running

To start a SEDA chain node with docker

docker run -d --name seda_node \
--env-file seda.env \
--volume ~/.seda-chain:/root/.seda-chain \
--volume $(pwd)/seda.env:/seda-chain/.env \
ghcr.io/sedaprotocol/node:latest start

where seda.env is a dotenv described here.

Stop and Start

The docker container should be stoppable and resumed as:

docker stop seda_node

# This runs it as a background process handled by docker.
docker start seda_node

Checking Logs

You can check the logs of your dockerized node by using the docker logs command. For example, to display the last 100 log lines:

docker logs seda_node -n 100

Executing seda-chaind Commands in Docker

Sometimes you may need to execute commands for example:

• Check if the dockerized node is a validator.
• Or how to stake/unstake.

These commands will all start with docker exec seda_node.

Env Variables Configuration

For the dockerized node to run it requires several Environment Variables to be setup.

We have an example .env file .env.example file you can look at. It also describes what the env variables do.

Checking Chain Status

There are a few things you may like to check as an operator(these assume your container is running):

1. The current height of the chain:

   docker exec seda_node /bin/bash -c "seda-chaind query block | jq '.block.header.height'"

   Which outputs a number, the current chain height.

2. More commands coming soon.

Staking

NOTE: This assumes you already have funds in your account. If you don't please add some funds to your account before trying.

To stake run the following command: NOTE: The amount at the end is the amount of tokens in aseda to stake.

docker exec seda_node /bin/bash -c "./staking.sh 1000"

# Which should produce some output:
gas estimate: 181315
code: 0
codespace: ""
data: ""
events: []
gas_used: "0"
gas_wanted: "0"
height: "0"
info: ""
logs: []
raw_log: '[]'
timestamp: ""
tx: null
txhash: 6C8A6C1925F3B373BBEA4DF609D8F1FAE6CDA094586763652557B527E88893A6

Unstaking

NOTE: This assumes you have already staked.

To unstake run the following command: NOTE: The amount at the end is the amount of tokens in aseda to stake.

docker exec seda_node /bin/bash -c "./unstaking.sh 1000"

# Which should produce some output:
gas estimate: 164451
code: 0
codespace: ""
data: ""
events: []
gas_used: "0"
gas_wanted: "0"
height: "0"
info: ""
logs: []
txhash: 1BA768C240B379E7BBFF74D68148E95A64BFB167497C341842F4C2AF94376A77

Checking Validator Status

You can then monitor your validator status by running: NOTE: To be a validator you must be one of the top 100 stakers.

docker exec seda_node /bin/bash -c "./check_validator.sh"

# Where you should see some output if error'd(which could mean it needs more time):
Error: rpc error: code = NotFound desc = rpc error: code = NotFound desc = validator sedavaloper1xd04svzj6zj93g4eknhp6aq2yyptagccp5pzst 

# Where you should see some output if successful:
commission:
  commission_rates:
    max_change_rate: "0.010000000000000000"
    max_rate: "0.200000000000000000"
    rate: "0.100000000000000000"
  update_time: "2023-11-02T22:24:25.799035935Z"
consensus_pubkey:
  '@type': /cosmos.crypto.ed25519.PubKey
  key: 0NyJ3YpZtJogW09gxxWRhnD19kYVoKpweSGmcMW+YrY=
delegator_shares: "1000.000000000000000000"
description:
  details: ""
  identity: ""
  moniker: bar
  security_contact: ""
  website: ""
jailed: false
min_self_delegation: "1"
operator_address: sedavaloper1xd04svzj6zj93g4eknhp6aq2yyptagccp5pzst
status: BOND_STATUS_UNBONDED
tokens: "1000"
unbonding_height: "0"
unbonding_ids: []
unbonding_on_hold_ref_count: "0"
unbonding_time: "1970-01-01T00:00:00Z"

License

Contents of this repository are open source under GNU General Public License v3.0.