Actors

Actors in CAF are a lightweight abstraction for units of computations. They are active objects in the sense that they own their state and do not allow others to access it. The only way to modify the state of an actor is sending messages to it.

CAF provides several actor implementations, each covering a particular use case. The available implementations differ in three characteristics: (1) dynamically or statically typed, (2) class-based or function-based, and (3) using asynchronous event handlers or blocking receives. These three characteristics can be combined freely, with one exception: statically typed actors are always event-based. For example, an actor can have dynamically typed messaging, implement a class, and use blocking receives. The common base class for all user-defined actors is called local_actor.

Dynamically typed actors are more familiar to developers coming from Erlang or Akka. They (usually) enable faster prototyping but require extensive unit testing. Statically typed actors require more source code but enable the compiler to verify communication between actors. Since CAF supports both, developers can freely mix both kinds of actors to get the best of both worlds. A good rule of thumb is to make use of static type checking for actors that are visible across multiple translation units.

Actors that utilize the blocking receive API always require an exclusive thread of execution. Event-based actors, on the other hand, are usually scheduled cooperatively and are very lightweight with a memory footprint of only few hundred bytes. Developers can exclude---detach---event-based actors that potentially starve others from the cooperative scheduling while spawning it. A detached actor lives in its own thread of execution.

Environment / Actor Systems

All actors live in an actor_system representing an actor environment including :ref:`scheduler`, :ref:`registry`, and optional components such as a :ref:`middleman`. A single process can have multiple actor_system instances, but this is usually not recommended (a use case for multiple systems is to strictly separate two or more sets of actors by running them in different schedulers). For configuration and fine-tuning options of actor systems see :ref:`system-config`. A distributed CAF application consists of two or more connected actor systems. We also refer to interconnected actor_system instances as a distributed actor system.

Common Actor Base Types

The following pseudo-UML depicts the class diagram for actors in CAF. Irrelevant member functions and classes as well as mixins are omitted for brevity. Selected individual classes are presented in more detail in the following sections.

Class `local_actor`

The class local_actor is the root type for all user-defined actors in CAF. It defines all common operations. However, users of the library usually do not inherit from this class directly. Proper base classes for user-defined actors are event_based_actor or blocking_actor. The following table also includes member function inherited from monitorable_actor and abstract_actor.

Types
`mailbox_type`	A concurrent, many-writers-single-reader queue type.

Constructors
`(actor_config&)`	Constructs the actor using a config.

Observers
`actor_addr address()`	Returns the address of this actor.
`actor_system& system()`	Returns `context()->system()`.
`actor_system& home_system()`	Returns the system that spawned this actor.
`execution_unit* context()`	Returns underlying thread or current scheduler worker.

Customization Points
`on_exit()`	Can be overridden to perform cleanup code.
`const char* name()`	Returns a debug name for this actor type.

Actor Management
`link_to(other)`	Links to `other` (see :ref:`link`).
`unlink_from(other)`	Remove the link to `other`.
`monitor(other)`	Adds a monitor to `other` (see :ref:`monitor`).
`demonitor(other)`	Removes a monitor from `whom`.
`spawn(F fun, xs...)`	Spawns a new actor from `fun`.
`spawn<T>(xs...)`	Spawns a new actor of type `T`.

Message Processing
`T make_response_promise<Ts...>()`	Allows an actor to delay its response message.
`T response(xs...)`	Convenience function for creating fulfilled promises.

Class `scheduled_actor`

All scheduled actors inherit from scheduled_actor. This includes statically and dynamically typed event-based actors as well as brokers :ref:`broker`.

Types
`pointer`	`scheduled_actor*`
`exception_handler`	`function<error (pointer, std::exception_ptr&)>`
`default_handler`	`function<result<message> (pointer, message_view&)>`
`error_handler`	`function<void (pointer, error&)>`
`down_handler`	`function<void (pointer, down_msg&)>`
`exit_handler`	`function<void (pointer, exit_msg&)>`

Constructors
`(actor_config&)`	Constructs the actor using a config.

Termination
`quit()`	Stops this actor with normal exit reason.
`quit(error x)`	Stops this actor with error `x`.

Special-purpose Handlers
`set_exception_handler(F f)`	Installs `f` for converting exceptions to errors (see :ref:`error`).
`set_down_handler(F f)`	Installs `f` to handle down messages (see :ref:`down-message`).
`set_exit_handler(F f)`	Installs `f` to handle exit messages (see :ref:`exit-message`).
`set_error_handler(F f)`	Installs `f` to handle error messages (see :ref:`error-message`).
`set_default_handler(F f)`	Installs `f` as fallback message handler (see :ref:`default-handler`).

Class `blocking_actor`

A blocking actor always lives in its own thread of execution. They are not as lightweight as event-based actors and thus do not scale up to large numbers. The primary use case for blocking actors is to use a scoped_actor for ad-hoc communication to selected actors. Unlike scheduled actors, CAF does not dispatch system messages to special-purpose handlers. A blocking actor receives all messages regularly through its mailbox. A blocking actor is considered done only after it returned from act (or from the implementation in function-based actors). A scoped_actor sends its exit messages as part of its destruction.

Constructors
`(actor_config&)`	Constructs the actor using a config.

Customization Points
`void act()`	Implements the behavior of the actor.

Termination
`const error& fail_state()`	Returns the current exit reason.
`fail_state(error x)`	Sets the current exit reason.

Actor Management
`wait_for(Ts... xs)`	Blocks until all actors `xs...` are done.
`await_all_other_actors_done()`	Blocks until all other actors are done.

Message Handling
`receive(Ts... xs)`	Receives a message using the callbacks `xs...`.
`receive_for(T& begin, T end)`	See receive-loop.
`receive_while(F stmt)`	See receive-loop.
`do_receive(Ts... xs)`	See receive-loop.

Messaging Interfaces

Statically typed actors require abstract messaging interfaces to allow the compiler to type-check actor communication. Interfaces in CAF are defined using the variadic template typed_actor<...>, which defines the proper actor handle at the same time. Each template parameter defines one input/output pair via replies_to<X1,...,Xn>::with<Y1,...,Yn>. For inputs that do not generate outputs, reacts_to<X1,...,Xn> can be used as shortcut for replies_to<X1,...,Xn>::with<void>. In the same way functions cannot be overloaded only by their return type, interfaces cannot accept one input twice (possibly mapping it to different outputs). The example below defines a messaging interface for a simple calculator.

.. literalinclude:: /examples/message_passing/calculator.cpp
   :language: C++
   :start-after: --(rst-calculator-actor-begin)--
   :end-before: --(rst-calculator-actor-end)--

It is not required to create a type alias such as calculator_actor, but it makes dealing with statically typed actors much easier. Also, a central alias definition eases refactoring later on.

Interfaces have set semantics. This means the following two type aliases i1 and i2 are considered equal by CAF:

using i1 = typed_actor<replies_to<A>::with<B>, replies_to<C>::with<D>>;
using i2 = typed_actor<replies_to<C>::with<D>, replies_to<A>::with<B>>;

Further, actor handles of type A are assignable to handles of type B as long as B is a subset of A.

For convenience, the class typed_actor<...> defines the member types shown below to grant access to derived types.

Types
`behavior_type`	A statically typed set of message handlers.
`base`	Base type for actors, i.e., `typed_event_based_actor<...>`.
`pointer`	A pointer of type `base*`.
`stateful_impl<T>`	See stateful-actor.
`stateful_pointer<T>`	A pointer of type `stateful_impl<T>*`.
`extend<Ts...>`	Extend this typed actor with `Ts...`.
`extend_with<Other>`	Extend this typed actor with all cases from `Other`.

Spawning Actors

Both statically and dynamically typed actors are spawned from an actor_system using the member function spawn. The function either takes a function as first argument or a class as first template parameter. For example, the following functions and classes represent actors.

.. literalinclude:: /examples/message_passing/calculator.cpp
   :language: C++
   :start-after: --(rst-prototypes-begin)--
   :end-before: --(rst-prototypes-end)--

Spawning an actor for each implementation is illustrated below.

.. literalinclude:: /examples/message_passing/calculator.cpp
   :language: C++
   :start-after: --(rst-spawn-begin)--
   :end-before: --(rst-spawn-end)--

Additional arguments to spawn are passed to the constructor of a class or used as additional function arguments, respectively. In the example above, none of the three functions takes any argument other than the implicit but optional self pointer.

Function-based Actors

When using a function or function object to implement an actor, the first argument can be used to capture a pointer to the actor itself. The type of this pointer is usually event_based_actor* or blocking_actor*. The proper pointer type for any typed_actor handle T can be obtained via T::pointer interface.

Blocking actors simply implement their behavior in the function body. The actor is done once it returns from that function.

Event-based actors can either return a behavior (see :ref:`message-handler`) that is used to initialize the actor or explicitly set the initial behavior by calling self->become(...). Due to the asynchronous, event-based nature of this kind of actor, the function usually returns immediately after setting a behavior (message handler) for the next incoming message. Hence, variables on the stack will be out of scope once a message arrives. Managing state in function-based actors can be done either via rebinding state with become, using heap-located data referenced via std::shared_ptr or by using the stateful actor abstraction (see :ref:`stateful-actor`).

The following three functions implement the prototypes shown in spawn and illustrate one blocking actor and two event-based actors (statically and dynamically typed).

.. literalinclude:: /examples/message_passing/calculator.cpp
   :language: C++
   :start-after: --(rst-function-based-begin)--
   :end-before: --(rst-function-based-end)--

Class-based Actors

Implementing an actor using a class requires the following:

Provide a constructor taking a reference of type actor_config& as first argument, which is forwarded to the base class. The config is passed implicitly to the constructor when calling spawn, which also forwards any number of additional arguments to the constructor.
Override make_behavior for event-based actors and act for blocking actors.

Implementing actors with classes works for all kinds of actors and allows simple management of state via member variables. However, composing states via inheritance can get quite tedious. For dynamically typed actors, composing states is particularly hard, because the compiler cannot provide much help.

The following three classes implement the prototypes shown in spawn by delegating to the function-based implementations we have seen before:

.. literalinclude:: /examples/message_passing/calculator.cpp
   :language: C++
   :start-after: --(rst-class-based-begin)--
   :end-before: --(rst-class-based-end)--

Stateful Actors

The stateful actor API makes it easy to maintain state in function-based actors. It is also safer than putting state in member variables, because the state ceases to exist after an actor is done and is not delayed until the destructor runs. For example, if two actors hold a reference to each other via member variables, they produce a cycle and neither will get destroyed. Using stateful actors instead breaks the cycle, because references are destroyed when an actor calls self->quit() (or is killed externally). The following example illustrates how to implement stateful actors with static typing as well as with dynamic typing.

.. literalinclude:: /examples/message_passing/cell.cpp
   :language: C++
   :start-after: --(rst-cell-begin)--
   :end-before: --(rst-cell-end)--

Stateful actors are spawned in the same way as any other function-based actor function-based.

.. literalinclude:: /examples/message_passing/cell.cpp
   :language: C++
   :start-after: --(rst-spawn-cell-begin)--
   :end-before: --(rst-spawn-cell-end)--

Attaching Cleanup Code to Actors

Users can attach cleanup code to actors. This code is executed immediately if the actor has already exited. Otherwise, the actor will execute it as part of its termination. The following example attaches a function object to actors for printing a custom string on exit.

.. literalinclude:: /examples/broker/simple_broker.cpp
   :language: C++
   :start-after: --(rst-attach-begin)--
   :end-before: --(rst-attach-end)--

It is possible to attach code to remote actors. However, the cleanup code will run on the local machine.

Blocking Actors

Blocking actors always run in a separate thread and are not scheduled by CAF. Unlike event-based actors, blocking actors have explicit, blocking receive functions. Further, blocking actors do not handle system messages automatically via special-purpose callbacks (see :ref:`special-handler`). This gives users full control over the behavior of blocking actors. However, blocking actors still should follow conventions of the actor system. For example, actors should unconditionally terminate after receiving an exit_msg with reason exit_reason::kill.

Receiving Messages

The function receive sequentially iterates over all elements in the mailbox beginning with the first. It takes a message handler that is applied to the elements in the mailbox until an element was matched by the handler. An actor calling receive is blocked until it successfully dequeued a message from its mailbox or an optional timeout occurs. Messages that are not matched by the behavior are automatically skipped and remain in the mailbox.

self->receive (
  [](int x) { /* ... */ }
);

Catch-all Receive Statements

Blocking actors can use inline catch-all callbacks instead of setting a default handler (see :ref:`default-handler`). A catch-all case must be the last callback before the optional timeout, as shown in the example below.

self->receive(
  [&](float x) {
    // ...
  },
  [&](const down_msg& x) {
    // ...
  },
  [&](const exit_msg& x) {
    // ...
  },
  others >> [](message& x) -> skippable_result {
    // report unexpected message back to client
    return sec::unexpected_message;
  }
);

Receive Loops

Message handler passed to receive are temporary object at runtime. Hence, calling receive inside a loop creates an unnecessary amount of short-lived objects. CAF provides predefined receive loops to allow for more efficient code.

// BAD
std::vector<int> results;
for (size_t i = 0; i < 10; ++i)
  receive (
    [&](int value) {
      results.push_back(value);
    }
  );

// GOOD
std::vector<int> results;
size_t i = 0;
receive_for(i, 10) (
  [&](int value) {
    results.push_back(value);
  }
);

// BAD
size_t received = 0;
while (received < 10) {
  receive (
    [&](int) {
      ++received;
    }
  );
} ;

// GOOD
size_t received = 0;
receive_while([&] { return received < 10; }) (
  [&](int) {
    ++received;
  }
);

// BAD
size_t received = 0;
do {
  receive (
    [&](int) {
      ++received;
    }
  );
} while (received < 10);

// GOOD
size_t received = 0;
do_receive (
  [&](int) {
    ++received;
  }
).until([&] { return received >= 10; });

The examples above illustrate the correct usage of the three loops receive_for, receive_while and do_receive(...).until. It is possible to nest receives and receive loops.

bool running = true;
self->receive_while([&] { return running; }) (
  [&](int value1) {
    self->receive (
      [&](float value2) {
        aout(self) << value1 << " => " << value2 << endl;
      }
    );
  },
  // ...
);

Scoped Actors

The class scoped_actor offers a simple way of communicating with CAF actors from non-actor contexts. It overloads operator-> to return a blocking_actor*. Hence, it behaves like the implicit self pointer in functor-based actors, only that it ceases to exist at scope end.

void test(actor_system& system) {
  scoped_actor self{system};
  // spawn some actor
  auto aut = self->spawn(my_actor_impl);
  self->send(aut, "hi there");
  // self will be destroyed automatically here; any
  // actor monitoring it will receive down messages etc.
}

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Actors.rst

Actors.rst

Actors

Environment / Actor Systems

Common Actor Base Types

Class `local_actor`

Class `scheduled_actor`

Class `blocking_actor`

Messaging Interfaces

Spawning Actors

Function-based Actors

Class-based Actors

Stateful Actors

Attaching Cleanup Code to Actors

Blocking Actors

Receiving Messages

Catch-all Receive Statements

Receive Loops

Scoped Actors

Files

Actors.rst

Latest commit

History

Actors.rst

File metadata and controls

Actors

Environment / Actor Systems

Common Actor Base Types

Class local_actor

Class scheduled_actor

Class blocking_actor

Messaging Interfaces

Spawning Actors

Function-based Actors

Class-based Actors

Stateful Actors

Attaching Cleanup Code to Actors

Blocking Actors

Receiving Messages

Catch-all Receive Statements

Receive Loops

Scoped Actors

Class `local_actor`

Class `scheduled_actor`

Class `blocking_actor`