omap-usb-host.c

/**
 * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
 * Author: Keshava Munegowda <keshava_mgowda@ti.com>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2  of
 * the License as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/gpio.h>
#include <plat/usb.h>
#include <linux/pm_runtime.h>

#define USBHS_DRIVER_NAME	"usbhs-omap"
#define OMAP_EHCI_DEVICE	"ehci-omap"
#define OMAP_OHCI_DEVICE	"ohci-omap3"

/* OMAP USBHOST Register addresses  */

/* TLL Register Set */
#define	OMAP_USBTLL_REVISION				(0x00)
#define	OMAP_USBTLL_SYSCONFIG				(0x10)
#define	OMAP_USBTLL_SYSCONFIG_CACTIVITY			(1 << 8)
#define	OMAP_USBTLL_SYSCONFIG_SIDLEMODE			(1 << 3)
#define	OMAP_USBTLL_SYSCONFIG_ENAWAKEUP			(1 << 2)
#define	OMAP_USBTLL_SYSCONFIG_SOFTRESET			(1 << 1)
#define	OMAP_USBTLL_SYSCONFIG_AUTOIDLE			(1 << 0)

#define	OMAP_USBTLL_SYSSTATUS				(0x14)
#define	OMAP_USBTLL_SYSSTATUS_RESETDONE			(1 << 0)

#define	OMAP_USBTLL_IRQSTATUS				(0x18)
#define	OMAP_USBTLL_IRQENABLE				(0x1C)

#define	OMAP_TLL_SHARED_CONF				(0x30)
#define	OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN		(1 << 6)
#define	OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN		(1 << 5)
#define	OMAP_TLL_SHARED_CONF_USB_DIVRATION		(1 << 2)
#define	OMAP_TLL_SHARED_CONF_FCLK_REQ			(1 << 1)
#define	OMAP_TLL_SHARED_CONF_FCLK_IS_ON			(1 << 0)

#define	OMAP_TLL_CHANNEL_CONF(num)			(0x040 + 0x004 * num)
#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT		24
#define	OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11)
#define	OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE		(1 << 10)
#define	OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE		(1 << 9)
#define	OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE		(1 << 8)
#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS		(1 << 1)
#define	OMAP_TLL_CHANNEL_CONF_CHANEN			(1 << 0)

#define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0		0x0
#define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM		0x1
#define OMAP_TLL_FSLSMODE_3PIN_PHY			0x2
#define OMAP_TLL_FSLSMODE_4PIN_PHY			0x3
#define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0		0x4
#define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM		0x5
#define OMAP_TLL_FSLSMODE_3PIN_TLL			0x6
#define OMAP_TLL_FSLSMODE_4PIN_TLL			0x7
#define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0		0xA
#define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM		0xB

#define	OMAP_TLL_ULPI_FUNCTION_CTRL(num)		(0x804 + 0x100 * num)
#define	OMAP_TLL_ULPI_INTERFACE_CTRL(num)		(0x807 + 0x100 * num)
#define	OMAP_TLL_ULPI_OTG_CTRL(num)			(0x80A + 0x100 * num)
#define	OMAP_TLL_ULPI_INT_EN_RISE(num)			(0x80D + 0x100 * num)
#define	OMAP_TLL_ULPI_INT_EN_FALL(num)			(0x810 + 0x100 * num)
#define	OMAP_TLL_ULPI_INT_STATUS(num)			(0x813 + 0x100 * num)
#define	OMAP_TLL_ULPI_INT_LATCH(num)			(0x814 + 0x100 * num)
#define	OMAP_TLL_ULPI_DEBUG(num)			(0x815 + 0x100 * num)
#define	OMAP_TLL_ULPI_SCRATCH_REGISTER(num)		(0x816 + 0x100 * num)

#define OMAP_TLL_CHANNEL_COUNT				3
#define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 0)
#define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 1)
#define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 2)

/* UHH Register Set */
#define	OMAP_UHH_REVISION				(0x00)
#define	OMAP_UHH_SYSCONFIG				(0x10)
#define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
#define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
#define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
#define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
#define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
#define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0)

#define	OMAP_UHH_SYSSTATUS				(0x14)
#define	OMAP_UHH_HOSTCONFIG				(0x40)
#define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0)
#define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0)
#define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
#define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8)
#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK		(1 << 31)

/* OMAP4-specific defines */
#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2)
#define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2)
#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4)
#define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4)
#define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0)

#define OMAP4_P1_MODE_CLEAR				(3 << 16)
#define OMAP4_P1_MODE_TLL				(1 << 16)
#define OMAP4_P1_MODE_HSIC				(3 << 16)
#define OMAP4_P2_MODE_CLEAR				(3 << 18)
#define OMAP4_P2_MODE_TLL				(1 << 18)
#define OMAP4_P2_MODE_HSIC				(3 << 18)

#define OMAP_REV2_TLL_CHANNEL_COUNT			2

#define	OMAP_UHH_DEBUG_CSR				(0x44)

/* Values of UHH_REVISION - Note: these are not given in the TRM */
#define OMAP_USBHS_REV1		0x00000010	/* OMAP3 */
#define OMAP_USBHS_REV2		0x50700100	/* OMAP4 */

#define is_omap_usbhs_rev1(x)	(x->usbhs_rev == OMAP_USBHS_REV1)
#define is_omap_usbhs_rev2(x)	(x->usbhs_rev == OMAP_USBHS_REV2)

#define is_ehci_phy_mode(x)	(x == OMAP_EHCI_PORT_MODE_PHY)
#define is_ehci_tll_mode(x)	(x == OMAP_EHCI_PORT_MODE_TLL)
#define is_ehci_hsic_mode(x)	(x == OMAP_EHCI_PORT_MODE_HSIC)


struct usbhs_hcd_omap {
	struct clk			*xclk60mhsp1_ck;
	struct clk			*xclk60mhsp2_ck;
	struct clk			*utmi_p1_fck;
	struct clk			*usbhost_p1_fck;
	struct clk			*usbtll_p1_fck;
	struct clk			*utmi_p2_fck;
	struct clk			*usbhost_p2_fck;
	struct clk			*usbtll_p2_fck;
	struct clk			*init_60m_fclk;

	void __iomem			*uhh_base;
	void __iomem			*tll_base;

	struct usbhs_omap_platform_data	platdata;

	u32				usbhs_rev;
	spinlock_t			lock;
	int				count;
};
/*-------------------------------------------------------------------------*/

const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
static u64 usbhs_dmamask = ~(u32)0;

/*-------------------------------------------------------------------------*/

static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
{
	__raw_writel(val, base + reg);
}

static inline u32 usbhs_read(void __iomem *base, u32 reg)
{
	return __raw_readl(base + reg);
}

static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
{
	__raw_writeb(val, base + reg);
}

static inline u8 usbhs_readb(void __iomem *base, u8 reg)
{
	return __raw_readb(base + reg);
}

/*-------------------------------------------------------------------------*/

static struct platform_device *omap_usbhs_alloc_child(const char *name,
			struct resource	*res, int num_resources, void *pdata,
			size_t pdata_size, struct device *dev)
{
	struct platform_device	*child;
	int			ret;

	child = platform_device_alloc(name, 0);

	if (!child) {
		dev_err(dev, "platform_device_alloc %s failed\n", name);
		goto err_end;
	}

	ret = platform_device_add_resources(child, res, num_resources);
	if (ret) {
		dev_err(dev, "platform_device_add_resources failed\n");
		goto err_alloc;
	}

	ret = platform_device_add_data(child, pdata, pdata_size);
	if (ret) {
		dev_err(dev, "platform_device_add_data failed\n");
		goto err_alloc;
	}

	child->dev.dma_mask		= &usbhs_dmamask;
	child->dev.coherent_dma_mask	= 0xffffffff;
	child->dev.parent		= dev;

	ret = platform_device_add(child);
	if (ret) {
		dev_err(dev, "platform_device_add failed\n");
		goto err_alloc;
	}

	return child;

err_alloc:
	platform_device_put(child);

err_end:
	return NULL;
}

static int omap_usbhs_alloc_children(struct platform_device *pdev)
{
	struct device				*dev = &pdev->dev;
	struct usbhs_hcd_omap			*omap;
	struct ehci_hcd_omap_platform_data	*ehci_data;
	struct ohci_hcd_omap_platform_data	*ohci_data;
	struct platform_device			*ehci;
	struct platform_device			*ohci;
	struct resource				*res;
	struct resource				resources[2];
	int					ret;

	omap = platform_get_drvdata(pdev);
	ehci_data = omap->platdata.ehci_data;
	ohci_data = omap->platdata.ohci_data;

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
	if (!res) {
		dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
		ret = -ENODEV;
		goto err_end;
	}
	resources[0] = *res;

	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
	if (!res) {
		dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
		ret = -ENODEV;
		goto err_end;
	}
	resources[1] = *res;

	ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data,
		sizeof(*ehci_data), dev);

	if (!ehci) {
		dev_err(dev, "omap_usbhs_alloc_child failed\n");
		ret = -ENOMEM;
		goto err_end;
	}

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
	if (!res) {
		dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
		ret = -ENODEV;
		goto err_ehci;
	}
	resources[0] = *res;

	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
	if (!res) {
		dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
		ret = -ENODEV;
		goto err_ehci;
	}
	resources[1] = *res;

	ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data,
		sizeof(*ohci_data), dev);
	if (!ohci) {
		dev_err(dev, "omap_usbhs_alloc_child failed\n");
		ret = -ENOMEM;
		goto err_ehci;
	}

	return 0;

err_ehci:
	platform_device_unregister(ehci);

err_end:
	return ret;
}

/**
 * usbhs_omap_probe - initialize TI-based HCDs
 *
 * Allocates basic resources for this USB host controller.
 */
static int __devinit usbhs_omap_probe(struct platform_device *pdev)
{
	struct device			*dev =  &pdev->dev;
	struct usbhs_omap_platform_data	*pdata = dev->platform_data;
	struct usbhs_hcd_omap		*omap;
	struct resource			*res;
	int				ret = 0;
	int				i;

	if (!pdata) {
		dev_err(dev, "Missing platform data\n");
		ret = -ENOMEM;
		goto end_probe;
	}

	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
	if (!omap) {
		dev_err(dev, "Memory allocation failed\n");
		ret = -ENOMEM;
		goto end_probe;
	}

	spin_lock_init(&omap->lock);

	for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
		omap->platdata.port_mode[i] = pdata->port_mode[i];

	omap->platdata.ehci_data = pdata->ehci_data;
	omap->platdata.ohci_data = pdata->ohci_data;

	pm_runtime_enable(&pdev->dev);

	omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
	if (IS_ERR(omap->utmi_p1_fck)) {
		ret = PTR_ERR(omap->utmi_p1_fck);
		dev_err(dev, "utmi_p1_gfclk failed error:%d\n",	ret);
		goto err_end;
	}

	omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
	if (IS_ERR(omap->xclk60mhsp1_ck)) {
		ret = PTR_ERR(omap->xclk60mhsp1_ck);
		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
		goto err_utmi_p1_fck;
	}

	omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
	if (IS_ERR(omap->utmi_p2_fck)) {
		ret = PTR_ERR(omap->utmi_p2_fck);
		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
		goto err_xclk60mhsp1_ck;
	}

	omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
	if (IS_ERR(omap->xclk60mhsp2_ck)) {
		ret = PTR_ERR(omap->xclk60mhsp2_ck);
		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
		goto err_utmi_p2_fck;
	}

	omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
	if (IS_ERR(omap->usbhost_p1_fck)) {
		ret = PTR_ERR(omap->usbhost_p1_fck);
		dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
		goto err_xclk60mhsp2_ck;
	}

	omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
	if (IS_ERR(omap->usbtll_p1_fck)) {
		ret = PTR_ERR(omap->usbtll_p1_fck);
		dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
		goto err_usbhost_p1_fck;
	}

	omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
	if (IS_ERR(omap->usbhost_p2_fck)) {
		ret = PTR_ERR(omap->usbhost_p2_fck);
		dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
		goto err_usbtll_p1_fck;
	}

	omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
	if (IS_ERR(omap->usbtll_p2_fck)) {
		ret = PTR_ERR(omap->usbtll_p2_fck);
		dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
		goto err_usbhost_p2_fck;
	}

	omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
	if (IS_ERR(omap->init_60m_fclk)) {
		ret = PTR_ERR(omap->init_60m_fclk);
		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
		goto err_usbtll_p2_fck;
	}

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
	if (!res) {
		dev_err(dev, "UHH EHCI get resource failed\n");
		ret = -ENODEV;
		goto err_init_60m_fclk;
	}

	omap->uhh_base = ioremap(res->start, resource_size(res));
	if (!omap->uhh_base) {
		dev_err(dev, "UHH ioremap failed\n");
		ret = -ENOMEM;
		goto err_init_60m_fclk;
	}

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
	if (!res) {
		dev_err(dev, "UHH EHCI get resource failed\n");
		ret = -ENODEV;
		goto err_tll;
	}

	omap->tll_base = ioremap(res->start, resource_size(res));
	if (!omap->tll_base) {
		dev_err(dev, "TLL ioremap failed\n");
		ret = -ENOMEM;
		goto err_tll;
	}

	platform_set_drvdata(pdev, omap);

	ret = omap_usbhs_alloc_children(pdev);
	if (ret) {
		dev_err(dev, "omap_usbhs_alloc_children failed\n");
		goto err_alloc;
	}

	goto end_probe;

err_alloc:
	iounmap(omap->tll_base);

err_tll:
	iounmap(omap->uhh_base);

err_init_60m_fclk:
	clk_put(omap->init_60m_fclk);

err_usbtll_p2_fck:
	clk_put(omap->usbtll_p2_fck);

err_usbhost_p2_fck:
	clk_put(omap->usbhost_p2_fck);

err_usbtll_p1_fck:
	clk_put(omap->usbtll_p1_fck);

err_usbhost_p1_fck:
	clk_put(omap->usbhost_p1_fck);

err_xclk60mhsp2_ck:
	clk_put(omap->xclk60mhsp2_ck);

err_utmi_p2_fck:
	clk_put(omap->utmi_p2_fck);

err_xclk60mhsp1_ck:
	clk_put(omap->xclk60mhsp1_ck);

err_utmi_p1_fck:
	clk_put(omap->utmi_p1_fck);

err_end:
	pm_runtime_disable(&pdev->dev);
	kfree(omap);

end_probe:
	return ret;
}

/**
 * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
 * @pdev: USB Host Controller being removed
 *
 * Reverses the effect of usbhs_omap_probe().
 */
static int __devexit usbhs_omap_remove(struct platform_device *pdev)
{
	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);

	if (omap->count != 0) {
		dev_err(&pdev->dev,
			"Either EHCI or OHCI is still using usbhs core\n");
		return -EBUSY;
	}

	iounmap(omap->tll_base);
	iounmap(omap->uhh_base);
	clk_put(omap->init_60m_fclk);
	clk_put(omap->usbtll_p2_fck);
	clk_put(omap->usbhost_p2_fck);
	clk_put(omap->usbtll_p1_fck);
	clk_put(omap->usbhost_p1_fck);
	clk_put(omap->xclk60mhsp2_ck);
	clk_put(omap->utmi_p2_fck);
	clk_put(omap->xclk60mhsp1_ck);
	clk_put(omap->utmi_p1_fck);
	pm_runtime_disable(&pdev->dev);
	kfree(omap);

	return 0;
}

static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
{
	switch (pmode) {
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
		return true;

	default:
		return false;
	}
}

/*
 * convert the port-mode enum to a value we can use in the FSLSMODE
 * field of USBTLL_CHANNEL_CONF
 */
static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
{
	switch (mode) {
	case OMAP_USBHS_PORT_MODE_UNUSED:
	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
		return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;

	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
		return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM;

	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
		return OMAP_TLL_FSLSMODE_3PIN_PHY;

	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
		return OMAP_TLL_FSLSMODE_4PIN_PHY;

	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
		return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0;

	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
		return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM;

	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
		return OMAP_TLL_FSLSMODE_3PIN_TLL;

	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
		return OMAP_TLL_FSLSMODE_4PIN_TLL;

	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
		return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0;

	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
		return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM;
	default:
		pr_warning("Invalid port mode, using default\n");
		return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0;
	}
}

static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count)
{
	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
	struct usbhs_omap_platform_data	*pdata = dev->platform_data;
	unsigned			reg;
	int				i;

	/* Program Common TLL register */
	reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF);
	reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
		| OMAP_TLL_SHARED_CONF_USB_DIVRATION);
	reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
	reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN;

	usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);

	/* Enable channels now */
	for (i = 0; i < tll_channel_count; i++) {
		reg = usbhs_read(omap->tll_base,
				OMAP_TLL_CHANNEL_CONF(i));

		if (is_ohci_port(pdata->port_mode[i])) {
			reg |= ohci_omap3_fslsmode(pdata->port_mode[i])
				<< OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT;
			reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS;
		} else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) {

			/* Disable AutoIdle, BitStuffing and use SDR Mode */
			reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
				| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
				| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);

			reg |= (1 << (i + 1));
		} else
			continue;

		reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
		usbhs_write(omap->tll_base,
				OMAP_TLL_CHANNEL_CONF(i), reg);

		usbhs_writeb(omap->tll_base,
				OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe);
	}
}

static int usbhs_enable(struct device *dev)
{
	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
	unsigned long			flags = 0;
	int				ret = 0;
	unsigned			reg;

	dev_dbg(dev, "starting TI HSUSB Controller\n");
	if (!pdata) {
		dev_dbg(dev, "missing platform_data\n");
		return  -ENODEV;
	}

	spin_lock_irqsave(&omap->lock, flags);
	if (omap->count > 0)
		goto end_count;

	pm_runtime_get_sync(dev);

	if (pdata->ehci_data->phy_reset) {
		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
			gpio_request(pdata->ehci_data->reset_gpio_port[0],
						"USB1 PHY reset");
			gpio_direction_output
				(pdata->ehci_data->reset_gpio_port[0], 0);
		}

		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
			gpio_request(pdata->ehci_data->reset_gpio_port[1],
						"USB2 PHY reset");
			gpio_direction_output
				(pdata->ehci_data->reset_gpio_port[1], 0);
		}

		/* Hold the PHY in RESET for enough time till DIR is high */
		udelay(10);
	}

	omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
	dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);

	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
	/* setup ULPI bypass and burst configurations */
	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
	reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;

	if (is_omap_usbhs_rev1(omap)) {
		if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED)
			reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
		if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED)
			reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
		if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED)
			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;

		/* Bypass the TLL module for PHY mode operation */
		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
			dev_dbg(dev, "OMAP3 ES version <= ES2.1\n");
			if (is_ehci_phy_mode(pdata->port_mode[0]) ||
				is_ehci_phy_mode(pdata->port_mode[1]) ||
					is_ehci_phy_mode(pdata->port_mode[2]))
				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
			else
				reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
		} else {
			dev_dbg(dev, "OMAP3 ES version > ES2.1\n");
			if (is_ehci_phy_mode(pdata->port_mode[0]))
				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
			else
				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
			if (is_ehci_phy_mode(pdata->port_mode[1]))
				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
			else
				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
			if (is_ehci_phy_mode(pdata->port_mode[2]))
				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
			else
				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
		}
	} else if (is_omap_usbhs_rev2(omap)) {
		/* Clear port mode fields for PHY mode*/
		reg &= ~OMAP4_P1_MODE_CLEAR;
		reg &= ~OMAP4_P2_MODE_CLEAR;

		if (is_ehci_phy_mode(pdata->port_mode[0])) {
			ret = clk_set_parent(omap->utmi_p1_fck,
						omap->xclk60mhsp1_ck);
			if (ret != 0) {
				dev_err(dev, "xclk60mhsp1_ck set parent"
				"failed error:%d\n", ret);
				goto err_tll;
			}
		} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
			ret = clk_set_parent(omap->utmi_p1_fck,
						omap->init_60m_fclk);
			if (ret != 0) {
				dev_err(dev, "init_60m_fclk set parent"
				"failed error:%d\n", ret);
				goto err_tll;
			}
			clk_enable(omap->usbhost_p1_fck);
			clk_enable(omap->usbtll_p1_fck);
		}

		if (is_ehci_phy_mode(pdata->port_mode[1])) {
			ret = clk_set_parent(omap->utmi_p2_fck,
						omap->xclk60mhsp2_ck);
			if (ret != 0) {
				dev_err(dev, "xclk60mhsp1_ck set parent"
					"failed error:%d\n", ret);
				goto err_tll;
			}
		} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
			ret = clk_set_parent(omap->utmi_p2_fck,
						omap->init_60m_fclk);
			if (ret != 0) {
				dev_err(dev, "init_60m_fclk set parent"
				"failed error:%d\n", ret);
				goto err_tll;
			}
			clk_enable(omap->usbhost_p2_fck);
			clk_enable(omap->usbtll_p2_fck);
		}

		clk_enable(omap->utmi_p1_fck);
		clk_enable(omap->utmi_p2_fck);

		if (is_ehci_tll_mode(pdata->port_mode[0]) ||
			(is_ohci_port(pdata->port_mode[0])))
			reg |= OMAP4_P1_MODE_TLL;
		else if (is_ehci_hsic_mode(pdata->port_mode[0]))
			reg |= OMAP4_P1_MODE_HSIC;

		if (is_ehci_tll_mode(pdata->port_mode[1]) ||
			(is_ohci_port(pdata->port_mode[1])))
			reg |= OMAP4_P2_MODE_TLL;
		else if (is_ehci_hsic_mode(pdata->port_mode[1]))
			reg |= OMAP4_P2_MODE_HSIC;
	}

	usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
	dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);

	if (is_ehci_tll_mode(pdata->port_mode[0]) ||
		is_ehci_tll_mode(pdata->port_mode[1]) ||
		is_ehci_tll_mode(pdata->port_mode[2]) ||
		(is_ohci_port(pdata->port_mode[0])) ||
		(is_ohci_port(pdata->port_mode[1])) ||
		(is_ohci_port(pdata->port_mode[2]))) {

		/* Enable UTMI mode for required TLL channels */
		if (is_omap_usbhs_rev2(omap))
			usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT);
		else
			usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT);
	}

	if (pdata->ehci_data->phy_reset) {
		/* Hold the PHY in RESET for enough time till
		 * PHY is settled and ready
		 */
		udelay(10);

		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
			gpio_set_value
				(pdata->ehci_data->reset_gpio_port[0], 1);

		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
			gpio_set_value
				(pdata->ehci_data->reset_gpio_port[1], 1);
	}

end_count:
	omap->count++;
	spin_unlock_irqrestore(&omap->lock, flags);
	return 0;

err_tll:
	pm_runtime_put_sync(dev);
	spin_unlock_irqrestore(&omap->lock, flags);
	if (pdata->ehci_data->phy_reset) {
		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
			gpio_free(pdata->ehci_data->reset_gpio_port[0]);

		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
	}
	return ret;
}

static void usbhs_disable(struct device *dev)
{
	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
	unsigned long			flags = 0;
	unsigned long			timeout;

	dev_dbg(dev, "stopping TI HSUSB Controller\n");

	spin_lock_irqsave(&omap->lock, flags);

	if (omap->count == 0)
		goto end_disble;

	omap->count--;

	if (omap->count != 0)
		goto end_disble;

	/* Reset OMAP modules for insmod/rmmod to work */
	usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG,
			is_omap_usbhs_rev2(omap) ?
			OMAP4_UHH_SYSCONFIG_SOFTRESET :
			OMAP_UHH_SYSCONFIG_SOFTRESET);

	timeout = jiffies + msecs_to_jiffies(100);
	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
				& (1 << 0))) {
		cpu_relax();

		if (time_after(jiffies, timeout))
			dev_dbg(dev, "operation timed out\n");
	}

	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
				& (1 << 1))) {
		cpu_relax();

		if (time_after(jiffies, timeout))
			dev_dbg(dev, "operation timed out\n");
	}

	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
				& (1 << 2))) {
		cpu_relax();

		if (time_after(jiffies, timeout))
			dev_dbg(dev, "operation timed out\n");
	}

	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));

	while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
				& (1 << 0))) {
		cpu_relax();

		if (time_after(jiffies, timeout))
			dev_dbg(dev, "operation timed out\n");
	}

	if (is_omap_usbhs_rev2(omap)) {
		if (is_ehci_tll_mode(pdata->port_mode[0]))
			clk_enable(omap->usbtll_p1_fck);
		if (is_ehci_tll_mode(pdata->port_mode[1]))
			clk_enable(omap->usbtll_p2_fck);
		clk_disable(omap->utmi_p2_fck);
		clk_disable(omap->utmi_p1_fck);
	}

	pm_runtime_put_sync(dev);

	/* The gpio_free migh sleep; so unlock the spinlock */
	spin_unlock_irqrestore(&omap->lock, flags);

	if (pdata->ehci_data->phy_reset) {
		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
			gpio_free(pdata->ehci_data->reset_gpio_port[0]);

		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
	}
	return;

end_disble:
	spin_unlock_irqrestore(&omap->lock, flags);
}

int omap_usbhs_enable(struct device *dev)
{
	return  usbhs_enable(dev->parent);
}
EXPORT_SYMBOL_GPL(omap_usbhs_enable);

void omap_usbhs_disable(struct device *dev)
{
	usbhs_disable(dev->parent);
}
EXPORT_SYMBOL_GPL(omap_usbhs_disable);

static struct platform_driver usbhs_omap_driver = {
	.driver = {
		.name		= (char *)usbhs_driver_name,
		.owner		= THIS_MODULE,
	},
	.remove		= __exit_p(usbhs_omap_remove),
};

MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");

static int __init omap_usbhs_drvinit(void)
{
	return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
}

/*
 * init before ehci and ohci drivers;
 * The usbhs core driver should be initialized much before
 * the omap ehci and ohci probe functions are called.
 */
fs_initcall(omap_usbhs_drvinit);

static void __exit omap_usbhs_drvexit(void)
{
	platform_driver_unregister(&usbhs_omap_driver);
}
module_exit(omap_usbhs_drvexit);