Skip to content

Latest commit

 

History

History
executable file
·
81 lines (50 loc) · 2.77 KB

507502_0_0.md

File metadata and controls

executable file
·
81 lines (50 loc) · 2.77 KB
layout title
documentation
507502 - ZWave

{% include base.html %}

507502 Flush-mounted switch

This describes the Z-Wave device 507502, manufactured by Merten with the thing type UID of merten_507502_00_000.

The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

507502 product image

The 507502 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.

Overview

The flush-mounted receiver can be used to switch loads on and off via radio (for information about permitted loads, see the technical data). When it receives the radio signal, the flush-mounted receiver switches the corresponding contact.

Inclusion Information

Triple click on the switch button

Exclusion Information

Triple click on the switch button

Channels

The following table summarises the channels available for the 507502 -:

Channel Name Channel ID Channel Type Category Item Type
Switch switch_binary switch_binary Switch Switch

Switch

Switch the power on and off.

The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.

Device Configuration

The device has no configuration parameters defined.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The device does not support associations.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1
COMMAND_CLASS_BASIC_V1
COMMAND_CLASS_SWITCH_BINARY_V1 Linked to BASIC
COMMAND_CLASS_SWITCH_ALL_V1
COMMAND_CLASS_SWITCH_TOGGLE_BINARY_V1
COMMAND_CLASS_CONFIGURATION_V1
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1
COMMAND_CLASS_PROTECTION_V2
COMMAND_CLASS_ASSOCIATION_V1
COMMAND_CLASS_VERSION_V1

Documentation Links


Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.