Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Starting drawings fails #19

Open
0815fox opened this issue Jan 21, 2023 · 3 comments
Open

Starting drawings fails #19

0815fox opened this issue Jan 21, 2023 · 3 comments

Comments

@0815fox
Copy link

0815fox commented Jan 21, 2023 •
edited
Loading

While 3D drawing etc works really good on my setup, I have the issue, that the following message pops up when I try to create a drawing.
The german text states:
"Could not start Fusion360 drawings. An installation problem prevents starting Fusion 360 drawings..."
It recommends to uninstall and reinstall Fusion360, which I did - unsuccessfully though.

After that this message box hangs forever.

Any clue on what I may need to install?

Thanks for any help provided.

image

The following console messages pop up in terminal after I click new drawing:

EnableNonClientDpiScaling() failed for HWND 0x1023c (120) (Aufruf nicht implementiert.)
None
None
None
EnableNonClientDpiScaling() failed for HWND 0x2023e (120) (Aufruf nicht implementiert.)

The following messages pop up in terminal before I click new drawing (so during fresh install and start of Fusion360):

fusion360
Initialising Wine..
Gtk-Message: 05:29:34.298: Failed to load module "appmenu-gtk-module"
Gtk-Message: 05:29:34.299: Failed to load module "canberra-gtk-module"
esync: up and running.
Installing application..
Gtk-Message: 05:29:50.598: Failed to load module "appmenu-gtk-module"
Gtk-Message: 05:29:50.598: Failed to load module "canberra-gtk-module"
--2023-01-21 05:29:56--  https://mirrors.kernel.org/gentoo/distfiles/andale32.exe
Resolving mirrors.kernel.org (mirrors.kernel.org)... 139.178.88.99, 2604:1380:45e3:2400::1
Connecting to mirrors.kernel.org (mirrors.kernel.org)|139.178.88.99|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 198384 (194K) [application/octet-stream]
Saving to: ‘andale32.exe’

andale32.exe                            100%[=============================================================================>] 193.73K   351KB/s    in 0.6s    

2023-01-21 05:29:58 (351 KB/s) - ‘andale32.exe’ saved [198384/198384]

esync: up and running.
--2023-01-21 05:30:03--  https://mirrors.kernel.org/gentoo/distfiles/arial32.exe
Resolving mirrors.kernel.org (mirrors.kernel.org)... 139.178.88.99, 2604:1380:45e3:2400::1
Connecting to mirrors.kernel.org (mirrors.kernel.org)|139.178.88.99|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 554208 (541K) [application/octet-stream]
Saving to: ‘arial32.exe’

arial32.exe                             100%[=============================================================================>] 541.22K   576KB/s    in 0.9s    

2023-01-21 05:30:05 (576 KB/s) - ‘arial32.exe’ saved [554208/554208]

--2023-01-21 05:30:05--  https://mirrors.kernel.org/gentoo/distfiles/arialb32.exe
Resolving mirrors.kernel.org (mirrors.kernel.org)... 139.178.88.99, 2604:1380:45e3:2400::1
Connecting to mirrors.kernel.org (mirrors.kernel.org)|139.178.88.99|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 168176 (164K) [application/octet-stream]
Saving to: ‘arialb32.exe’

arialb32.exe                            100%[=============================================================================>] 164.23K   290KB/s    in 0.6s    

2023-01-21 05:30:06 (290 KB/s) - ‘arialb32.exe’ saved [168176/168176]

esync: up and running.
esync: up and running.
--2023-01-21 05:30:17--  https://mirrors.kernel.org/gentoo/distfiles/comic32.exe
Resolving mirrors.kernel.org (mirrors.kernel.org)... 139.178.88.99, 2604:1380:45e3:2400::1
Connecting to mirrors.kernel.org (mirrors.kernel.org)|139.178.88.99|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 246008 (240K) [application/octet-stream]
Saving to: ‘comic32.exe’

comic32.exe                             100%[=============================================================================>] 240.24K   314KB/s    in 0.8s    

2023-01-21 05:30:19 (314 KB/s) - ‘comic32.exe’ saved [246008/246008]

esync: up and running.
--2023-01-21 05:30:25--  https://mirrors.kernel.org/gentoo/distfiles/courie32.exe
Resolving mirrors.kernel.org (mirrors.kernel.org)... 139.178.88.99, 2604:1380:45e3:2400::1
Connecting to mirrors.kernel.org (mirrors.kernel.org)|139.178.88.99|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 646368 (631K) [application/octet-stream]
Saving to: ‘courie32.exe’

courie32.exe                            100%[=============================================================================>] 631.22K   819KB/s    in 0.8s    

2023-01-21 05:30:27 (819 KB/s) - ‘courie32.exe’ saved [646368/646368]

esync: up and running.
--2023-01-21 05:30:34--  https://mirrors.kernel.org/gentoo/distfiles/georgi32.exe
Resolving mirrors.kernel.org (mirrors.kernel.org)... 139.178.88.99, 2604:1380:45e3:2400::1
Connecting to mirrors.kernel.org (mirrors.kernel.org)|139.178.88.99|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 392440 (383K) [application/octet-stream]
Saving to: ‘georgi32.exe’

georgi32.exe                            100%[=============================================================================>] 383.24K   506KB/s    in 0.8s    

2023-01-21 05:30:36 (506 KB/s) - ‘georgi32.exe’ saved [392440/392440]

esync: up and running.
--2023-01-21 05:30:44--  https://mirrors.kernel.org/gentoo/distfiles/impact32.exe
Resolving mirrors.kernel.org (mirrors.kernel.org)... 139.178.88.99, 2604:1380:45e3:2400::1
Connecting to mirrors.kernel.org (mirrors.kernel.org)|139.178.88.99|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 173288 (169K) [application/octet-stream]
Saving to: ‘impact32.exe’

impact32.exe                            100%[=============================================================================>] 169.23K   304KB/s    in 0.6s    

2023-01-21 05:30:45 (304 KB/s) - ‘impact32.exe’ saved [173288/173288]

esync: up and running.
--2023-01-21 05:30:51--  https://mirrors.kernel.org/gentoo/distfiles/times32.exe
Resolving mirrors.kernel.org (mirrors.kernel.org)... 139.178.88.99, 2604:1380:45e3:2400::1
Connecting to mirrors.kernel.org (mirrors.kernel.org)|139.178.88.99|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 661728 (646K) [application/octet-stream]
Saving to: ‘times32.exe’

times32.exe                             100%[=============================================================================>] 646.22K   839KB/s    in 0.8s    

2023-01-21 05:30:52 (839 KB/s) - ‘times32.exe’ saved [661728/661728]

esync: up and running.
--2023-01-21 05:30:59--  https://mirrors.kernel.org/gentoo/distfiles/trebuc32.exe
Resolving mirrors.kernel.org (mirrors.kernel.org)... 139.178.88.99, 2604:1380:45e3:2400::1
Connecting to mirrors.kernel.org (mirrors.kernel.org)|139.178.88.99|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 357200 (349K) [application/octet-stream]
Saving to: ‘trebuc32.exe’

trebuc32.exe                            100%[=============================================================================>] 348.83K   469KB/s    in 0.7s    

2023-01-21 05:31:01 (469 KB/s) - ‘trebuc32.exe’ saved [357200/357200]

esync: up and running.
--2023-01-21 05:31:08--  https://mirrors.kernel.org/gentoo/distfiles/verdan32.exe
Resolving mirrors.kernel.org (mirrors.kernel.org)... 139.178.88.99, 2604:1380:45e3:2400::1
Connecting to mirrors.kernel.org (mirrors.kernel.org)|139.178.88.99|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 351992 (344K) [application/octet-stream]
Saving to: ‘verdan32.exe’

verdan32.exe                            100%[=============================================================================>] 343.74K   447KB/s    in 0.8s    

2023-01-21 05:31:10 (447 KB/s) - ‘verdan32.exe’ saved [351992/351992]

esync: up and running.
--2023-01-21 05:31:19--  https://mirrors.kernel.org/gentoo/distfiles/webdin32.exe
Resolving mirrors.kernel.org (mirrors.kernel.org)... 139.178.88.99, 2604:1380:45e3:2400::1
Connecting to mirrors.kernel.org (mirrors.kernel.org)|139.178.88.99|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 185072 (181K) [application/octet-stream]
Saving to: ‘webdin32.exe’

webdin32.exe                            100%[=============================================================================>] 180.73K   317KB/s    in 0.6s    

2023-01-21 05:31:20 (317 KB/s) - ‘webdin32.exe’ saved [185072/185072]

esync: up and running.
Gtk-Message: 05:31:24.953: Failed to load module "appmenu-gtk-module"
Gtk-Message: 05:31:24.953: Failed to load module "canberra-gtk-module"
--2023-01-21 05:31:29--  https://aka.ms/vs/15/release/vc_redist.x86.exe
Resolving aka.ms (aka.ms)... 2.19.36.223
Connecting to aka.ms (aka.ms)|2.19.36.223|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://download.visualstudio.microsoft.com/download/pr/2b5bcd2f-0dbc-4b83-90a3-3b1c5ae77e62/0252474394129dbab6ff9ce24f1c6a3c/vc_redist.x86.exe [following]
--2023-01-21 05:31:29--  https://download.visualstudio.microsoft.com/download/pr/2b5bcd2f-0dbc-4b83-90a3-3b1c5ae77e62/0252474394129dbab6ff9ce24f1c6a3c/vc_redist.x86.exe
Resolving download.visualstudio.microsoft.com (download.visualstudio.microsoft.com)... 68.232.34.200, 2606:2800:133:f17:19e8:2356:251b:2a9
Connecting to download.visualstudio.microsoft.com (download.visualstudio.microsoft.com)|68.232.34.200|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 14636936 (14M) [application/octet-stream]
Saving to: ‘vc_redist.x86.exe’

vc_redist.x86.exe                       100%[=============================================================================>]  13.96M  11.6MB/s    in 1.2s    

2023-01-21 05:31:30 (11.6 MB/s) - ‘vc_redist.x86.exe’ saved [14636936/14636936]

/home/michael/snap/fusion360/common/.wine/dosdevices/c:/windows/temp/win32/a10: WARNING; possible 16776 extra bytes at end of file.
esync: up and running.
--2023-01-21 05:31:37--  https://aka.ms/vs/15/release/vc_redist.x64.exe
Resolving aka.ms (aka.ms)... 2.19.36.223
Connecting to aka.ms (aka.ms)|2.19.36.223|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://download.visualstudio.microsoft.com/download/pr/4100b84d-1b4d-487d-9f89-1354a7138c8f/5B0CBB977F2F5253B1EBE5C9D30EDBDA35DBD68FB70DE7AF5FAAC6423DB575B5/VC_redist.x64.exe [following]
--2023-01-21 05:31:38--  https://download.visualstudio.microsoft.com/download/pr/4100b84d-1b4d-487d-9f89-1354a7138c8f/5B0CBB977F2F5253B1EBE5C9D30EDBDA35DBD68FB70DE7AF5FAAC6423DB575B5/VC_redist.x64.exe
Resolving download.visualstudio.microsoft.com (download.visualstudio.microsoft.com)... 68.232.34.200, 2606:2800:133:f17:19e8:2356:251b:2a9
Connecting to download.visualstudio.microsoft.com (download.visualstudio.microsoft.com)|68.232.34.200|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 15311608 (15M) [application/octet-stream]
Saving to: ‘vc_redist.x64.exe’

vc_redist.x64.exe                       100%[=============================================================================>]  14.60M  11.7MB/s    in 1.3s    

2023-01-21 05:31:39 (11.7 MB/s) - ‘vc_redist.x64.exe’ saved [15311608/15311608]

/home/michael/snap/fusion360/common/.wine/dosdevices/c:/windows/temp/win64/a10: WARNING; possible 16776 extra bytes at end of file.
Gtk-Message: 05:31:46.069: Failed to load module "appmenu-gtk-module"
Gtk-Message: 05:31:46.069: Failed to load module "canberra-gtk-module"
Gtk-Message: 05:31:51.300: Failed to load module "appmenu-gtk-module"
Gtk-Message: 05:31:51.300: Failed to load module "canberra-gtk-module"
Running hook '/snap/fusion360/16/sommelier/hooks/pre-install'
Writing NMachineSpecificOptions.xml to force OpenGL
Gtk-Message: 05:32:00.610: Failed to load module "appmenu-gtk-module"
Gtk-Message: 05:32:00.610: Failed to load module "canberra-gtk-module"
esync: up and running.
Gtk-Message: 05:33:37.874: Failed to load module "appmenu-gtk-module"
Gtk-Message: 05:33:37.874: Failed to load module "canberra-gtk-module"
Ungültiger Name.

Unknown option: -show
removed '/tmp/Fusion%20360%20Admin%20Install.exe'
Running hook '/snap/fusion360/16/sommelier/hooks/post-install'
updated RUN_EXE=/home/michael/snap/fusion360/common/.wine/drive_c/Program Files/Autodesk/webdeploy/production/6a0c9611291d45bb9226980209917c3d/FusionLauncher.exe
Starting application..
QWinEventNotifier: Can only be used with threads started with QThread
"C:/Program Files/Autodesk/webdeploy/production/414da7cdec4faa7986fe0d205fb521fc68f5d46c/plugins"
EnableNonClientDpiScaling() failed for HWND 0x30098 (120) (Aufruf nicht implementiert.)
wine: Read access denied for device L"\\??\\Z:\\", FS volume label and serial are not available.
wine: Read access denied for device L"\\??\\Z:\\", FS volume label and serial are not available.
wine: Read access denied for device L"\\??\\Z:\\", FS volume label and serial are not available.
[496:500:0121/053536.892:ERROR:dxva_video_decode_accelerator_win.cc(1399)] DXVAVDA fatal error: could not LoadLibrary: msmpeg2vdec.dll: Modul nicht gefunden. 
(0x7E)
[496:500:0121/053536.894:ERROR:dxva_video_decode_accelerator_win.cc(1407)] DXVAVDA fatal error: could not LoadLibrary: msvproc.dll: Modul nicht gefunden. (0x7
E)
[496:500:0121/053536.993:ERROR:network_change_notifier_win.cc(142)] WSALookupServiceBegin failed with: 8

DevTools listening on ws://127.0.0.1:9766/devtools/browser/85bca228-fb7a-4ac8-89f3-9874f0e82cc4
qt.qpa.fonts: Unable to enumerate family ' "Noto Sans Inscriptional Parthian" '
BUG OptionAdapter UseEagleRc called before setting callbacks.EagleAPI.Version = 0.1.2
qt.qpa.fonts: Unable to enumerate family ' "Noto Sans Inscriptional Parthian" '
BUG OptionAdapter UseEagleRc called before setting callbacks.BUG OptionAdapter UseEagleRc called before setting callbacks.QString::arg: 1 argument(s) missing 
in %1/scripts
QString::arg: 1 argument(s) missing in %1/scripts
BUG OptionAdapter UseEagleRc called before setting callbacks.QString::arg: 1 argument(s) missing in %1/ulps
QString::arg: 1 argument(s) missing in %1/ulps
BUG OptionAdapter UseEagleRc called before setting callbacks.QString::arg: 1 argument(s) missing in %1/design rules
QString::arg: 1 argument(s) missing in %1/design rules
BUG OptionAdapter UseEagleRc called before setting callbacks.QString::arg: 1 argument(s) missing in %1/spice
QString::arg: 1 argument(s) missing in %1/spice
Registering module:  "uiHelper"
EnableNonClientDpiScaling() failed for HWND 0x100f6 (120) (Aufruf nicht implementiert.)
EnableNonClientDpiScaling() failed for HWND 0x2011a (120) (Aufruf nicht implementiert.)
Remote debugging server started successfully. Try pointing a Chromium-based browser to http://127.0.0.1:9766
SetProcessDPIAwareness failed. (Zugriff verweigert.)
[952:956:0121/053541.545:ERROR:dxva_video_decode_accelerator_win.cc(1399)] DXVAVDA fatal error: could not LoadLibrary: msmpeg2vdec.dll: Modul nicht gefunden. 
(0x7E)
[952:956:0121/053541.547:ERROR:dxva_video_decode_accelerator_win.cc(1407)] DXVAVDA fatal error: could not LoadLibrary: msvproc.dll: Modul nicht gefunden. (0x7
E)
[952:988:0121/053541.551:ERROR:network_change_notifier_win.cc(142)] WSALookupServiceBegin failed with: 8
"05:35::41.679" MAGWorkControllerClientConnection  cmd sent  "auth"
"05:35::41.680" MAGWorkClientControllerConnection  cmd sent  "auth"
MAGWorkControllerClientConnection  cmd received  "auth"
"05:35::41.680" MAGWorkControllerClientConnection  cmd sent  "authok"
MAGWorkClientControllerConnection  cmd received  "auth"
"05:35::41.681" MAGWorkClientControllerConnection  cmd sent  "authok"
MAGWorkClientControllerConnection  cmd received  "authok"
MAGWorkControllerClientConnection  cmd received  "authok"
Connecting to controller server
Controller server info:  QHostAddress("127.0.0.1") : 37823
host connected QHostAddress("127.0.0.1") : 60416
"05:35::41.682" MAGWorkControllerHostConnection  cmd sent  "auth"
"05:35::41.683" MAGWorkHostControllerConnection  cmd sent  "auth"
MAGWorkControllerHostConnection  cmd received  "auth"
"05:35::41.683" MAGWorkControllerHostConnection  cmd sent  "authok"
MAGWorkHostControllerConnection  cmd received  "auth"
"05:35::41.683" MAGWorkHostControllerConnection  cmd sent  "authok"
MAGWorkHostControllerConnection  cmd received  "authok"
Controller connected
Sending max processes:  16
"05:35::41.684" MAGWorkHostControllerConnection  cmd sent  "ready"
MAGWorkControllerHostConnection  cmd received  "authok"
MAGWorkControllerHostConnection  cmd received  "ready"
js: Synchronous XMLHttpRequest on the main thread is deprecated because of its detrimental effects to the end user's experience. For more help, check https://
xhr.spec.whatwg.org/.
EnableNonClientDpiScaling() failed for HWND 0x400b2 (120) (Aufruf nicht implementiert.)
QObject::disconnect: No such signal Nu::LoginDialog::onResized(QResizeEvent*)
QObject::disconnect: No such signal Nu::LoginDialog::onMoved(QMoveEvent*)
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
MAG.Default: [Idle Status] Report Idle(Idle or Not):  false
None
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
[0121/054541.682:ERROR:network_change_notifier_win.cc(156)] WSALookupServiceBegin failed with: 8
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
OpenThemeData() failed for theme 16 (WINDOW). (Element nicht gefunden.)
[0121/054542.110:ERROR:mf_helpers.cc(12)] Error in dxva_video_decode_accelerator_win.cc on line 355
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
QWidget::paintEngine: Should no longer be called
QPainter::begin: Paint device returned engine == 0, type: 1
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
QWidget::setMinimumSize: (MainDashboardPalette_1/QTDockWidget) Negative sizes (0,-1) are not possible
QWidget::setMinimumSize: (LearningPanelPalette_1/QTDockWidget) Negative sizes (0,-1) are not possible
QWidget::paintEngine: Should no longer be called
QPainter::begin: Paint device returned engine == 0, type: 1
QWidget::paintEngine: Should no longer be called
QPainter::begin: Paint device returned engine == 0, type: 1
QWidget::setMinimumSize: (MainDashboardPalette_1/QTDockWidget) Negative sizes (0,-1) are not possible
QWidget::paintEngine: Should no longer be called
QPainter::begin: Paint device returned engine == 0, type: 1
QWidget::paintEngine: Should no longer be called
QPainter::begin: Paint device returned engine == 0, type: 1
Unable to connect to 127.0.0.1:10221
Unable to connect to 127.0.0.1:10221
QWidget::setMinimumSize: (MainDashboardPalette_1/QTDockWidget) Negative sizes (0,-1) are not possible
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
EnableNonClientDpiScaling() failed for HWND 0x201f0 (120) (Aufruf nicht implementiert.)
05:45:46 Will ignore disconnects: false
05:45:46 Using ws on port 10221
05:45:46 Installing exception handlers
05:45:46 Global exception handler installed
05:45:46 Installing signal handlers
05:45:46 Installed SIGHUP
05:45:46 Installed SIGTERM
05:45:46 Installed SIGINT
05:45:46 Installed SIGBREAK
05:45:46 (node:2208) [DEP0005] DeprecationWarning: Buffer() is deprecated due to security and usability issues. Please use the Buffer.alloc(), Buffer.allocUns
afe(), or Buffer.from() methods instead.
(Use `node --trace-deprecation ...` to show where the warning was created)
EagleRc-DestruktorEnableNonClientDpiScaling() failed for HWND 0x20208 (120) (Aufruf nicht implementiert.)
05:45:48 [scheduleBearerTokenRefresh]: Token expiring in 3522 seconds
20230121T044548 INFO 2208  Use SQLite database at C:\users\michael\AppData\Local\Autodesk\Autodesk Fusion 360\<oxygen id>\co.690joO4jRkSCkYOQ0yNOSA_v3.sql
20230121T044548 INFO 2208  PIMClient created with plugins:  ["ProductPlugin","PIMConfigurationPlugin","PIMPmiPlugin","PIMShopFloorPlugin","PIMDataExtensionPlu
gin"]
05:45:48 --------------------------------------------------------------------------------
05:45:48 [postSdkInitializationExecutor]: Start
05:45:48 Starting synchronization for space-collection co.690joO4jRkSCkYOQ0yNOSA
05:45:48 [rpcHandler]: Receiving command setProxy
05:45:48 Disabling proxy
05:45:48 [rpcHandler]: Receiving command featureFlagsDownloaded
05:45:48 [featureFlagsDownloaded]: Received event
05:45:48 [featureFlagsDownloaded]: Feature flags on hub ecopassion with tenant 21731318: {"ffProperties":true,"ffWrite":true,"ffConfiguration":false,"ffBrep":
false,"ffEliminateMigration":false,"ffFailureMock":false,"ffCompVer":true,"ffPMI":false,"ffShopfloor":false,"ffMeCacheCommands":false,"ffAnyCADInvPart":true,"
ffLightType":false,"ffPC":false,"ffPCW":false,"ffClobberSaveClearCache":false,"ffCreateSqlV3":true,"ffCmdsRateLimitPerMinute":"600","ffRetryRemoteVersionSnaps
hotLimitSec":"24","ffAxiosProxyOption":"1"}
20230121T044548 INFO 2208  getHubInfoByTenantId 21731318 undefined
05:45:48 Synchronization for space collection co.690joO4jRkSCkYOQ0yNOSA failed: Failed fetching data while syncing:
    Error: Request failed after 1 attempt(s). With error: connect UNKNOWN 52.16.220.13:443 - Local (undefined:undefined).
        at tryFn (C:/Program Files/Autodesk/webdeploy/production/414da7cdec4faa7986fe0d205fb521fc68f5d46c/FremontJsLib/lib.fremont.nodejs.js:2:2232863)
        at async C:/Program Files/Autodesk/webdeploy/production/414da7cdec4faa7986fe0d205fb521fc68f5d46c/FremontJsLib/lib.fremont.nodejs.js:2:537843
05:45:48 [postSdkInitializationExecutor]: End (29 ms)
05:45:48 --------------------------------------------------------------------------------
05:45:48 Could not get hub ecopassion: Error: [ft-client]: Failed to fetch Hub info. tenantId: 21731318, impersonateUserid: undefined, baseUrl:https://ecopass
ion.autodesk360.com, url:/login/api/hubs/21731318, status:undefined, data:undefined
05:45:48 [documentIdentityService]: PIM is disabled for this hub. Skipping
        rehydrating service. Space Collection id: co.690joO4jRkSCkYOQ0yNOSA
05:45:48 Space collection id is : co.690joO4jRkSCkYOQ0yNOSA
05:45:48 [rpcHandler]: Receiving command triggerMigration
05:45:48 Call to handler triggerMigration failed: Unexpected Journal Error while executing query: Request failed after 1 attempt(s). With error: connect UNKNO
WN 52.215.202.79:443 - Local (undefined:undefined). SDKError: Unexpected Journal Error while executing query: Request failed after 1 attempt(s). With error: c
onnect UNKNOWN 52.215.202.79:443 - Local (undefined:undefined).
    at RequestRunner.executeQuery (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs.js:
2:2386104)
    at processTicksAndRejections (internal/process/task_queues.js:95:5)
    at async SDKCore.get (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs.js:2:2411743
)
    at async Object.triggerMigration [as handler] (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fr
emont.nodejs.js:2:4813230)
    at async rpcServiceSocketCallback (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs
.js:2:858136)
    at async C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs.js:2:861493
    at async WsAdaptor.handleIncomingRequest (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont
.nodejs.js:2:4925801)
    at async WsAdaptor.handleMessage (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs.
js:2:4925369)
    at async C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs.js:2:4924181
Caused by JournalError: Request failed after 1 attempt(s). With error: connect UNKNOWN 52.215.202.79:443 - Local (undefined:undefined).
    at tryFn (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs.js:2:2232863)
    at processTicksAndRejections (internal/process/task_queues.js:95:5)
    at async QueryExecutor.executeOnServer (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.n
odejs.js:2:2206311)
Caused by Object: connect UNKNOWN 52.215.202.79:443 - Local (undefined:undefined)
    at internalConnect (net.js:934:16)
    at defaultTriggerAsyncIdScope (internal/async_hooks.js:452:18)
    at GetAddrInfoReqWrap.emitLookup [as callback] (net.js:1077:9)
    at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:73:8)
05:45:48 SDKError: Unexpected Journal Error while executing query: Request failed after 1 attempt(s). With error: connect UNKNOWN 52.215.202.79:443 - Local (u
ndefined:undefined).
    at RequestRunner.executeQuery (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs.js:
2:2386104)
    at processTicksAndRejections (internal/process/task_queues.js:95:5)
    at async SDKCore.get (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs.js:2:2411743
)
    at async Object.triggerMigration [as handler] (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fr
emont.nodejs.js:2:4813230)
    at async rpcServiceSocketCallback (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs
.js:2:858136)
    at async C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs.js:2:861493
    at async WsAdaptor.handleIncomingRequest (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont
.nodejs.js:2:4925801)
    at async WsAdaptor.handleMessage (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs.
js:2:4925369)
    at async C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs.js:2:4924181
Caused by JournalError: Request failed after 1 attempt(s). With error: connect UNKNOWN 52.215.202.79:443 - Local (undefined:undefined).
    at tryFn (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.nodejs.js:2:2232863)
    at processTicksAndRejections (internal/process/task_queues.js:95:5)
    at async QueryExecutor.executeOnServer (C:\Program Files\Autodesk\webdeploy\production\414da7cdec4faa7986fe0d205fb521fc68f5d46c\FremontJsLib\lib.fremont.n
odejs.js:2:2206311)
Caused by Object: connect UNKNOWN 52.215.202.79:443 - Local (undefined:undefined)
    at internalConnect (net.js:934:16)
    at defaultTriggerAsyncIdScope (internal/async_hooks.js:452:18)
    at GetAddrInfoReqWrap.emitLookup [as callback] (net.js:1077:9)
    at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:73:8)
EnableNonClientDpiScaling() failed for HWND 0x10210 (120) (Aufruf nicht implementiert.)
EagleRc-DestruktorQWidget::paintEngine: Should no longer be called
QPainter::begin: Paint device returned engine == 0, type: 1
QWidget::paintEngine: Should no longer be called
QPainter::begin: Paint device returned engine == 0, type: 1
QWidget::paintEngine: Should no longer be called
QPainter::begin: Paint device returned engine == 0, type: 1
MAG.Default: Test platform is ready.
MAG.Default: [Idle Status] Report Idle(Idle or Not):  true
EnableNonClientDpiScaling() failed for HWND 0x2022c (120) (Aufruf nicht implementiert.)
EnableNonClientDpiScaling() failed for HWND 0x10230 (120) (Aufruf nicht implementiert.)
EnableNonClientDpiScaling() failed for HWND 0x30234 (120) (Aufruf nicht implementiert.)
EnableNonClientDpiScaling() failed for HWND 0x10236 (120) (Aufruf nicht implementiert.)
MAG.Default: [Idle Status] Report Idle(Idle or Not):  false
EnableNonClientDpiScaling() failed for HWND 0x20210 (120) (Aufruf nicht implementiert.)
MAG.Default: [Idle Status] Report Idle(Idle or Not):  true
MAG.Default: [Idle Status] Report Idle(Idle or Not):  false
MAG.Default: [Idle Status] Report Idle(Idle or Not):  true
MAG.Default: [Idle Status] Report Idle(Idle or Not):  false
@horasim
Copy link

horasim commented Jan 24, 2023

I have the same issue, running Gnome Fedora 37

@horasim
Copy link

horasim commented Jan 24, 2023

Also, when the error window opens, the program is unresponsive for me (I can't even click OK or close the window with mouse) and I have to close the error message with alt+F4, after which the program works again.

@DASPELLER4
Copy link

I had the exact same issue with all of the same errors, tried reinstalling but alas the sign in is entirely broken, I presume this github is abandoned as this huge issue from 24/1 hasn't even been acknowledged.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@0815fox @DASPELLER4 @horasim