diff --git a/misc/setup-arl.sh b/misc/setup-arl.sh
new file mode 100644
index 0000000..89d20d4
--- /dev/null
+++ b/misc/setup-arl.sh
@@ -0,0 +1,684 @@
+#!/bin/bash
+#set -e
+
+check_selinux(){
+systemctl stop firewalld &> /dev/null
+systemctl disable firewalld &> /dev/null
+systemctl stop iptables &> /dev/null
+systemctl disable iptables &> /dev/null
+ufw disable &> /dev/null
+echo "防火墙已被禁用."
+
+if sestatus | grep "SELinux status" | grep -q "enabled"; then
+        WARN "SELinux 已启用。禁用 SELinux..."
+        setenforce 0
+        sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
+        echo "SELinux 已被禁用."
+    else
+        echo "SELinux 已被禁用."
+fi
+}
+
+fixed_check_osver() {
+  if [ -f /etc/os-release ]; then
+    . /etc/os-release
+  else
+    echo "无法确定发行版"
+    exit 1
+  fi
+
+  case "$NAME $VERSION_ID" in
+    "CentOS Linux 7")
+      os_ver="CentOS Linux 7"
+      ;;
+    "Ubuntu 20.04")
+      os_ver="Ubuntu 20.04"
+      ;;
+    *)
+      echo "此脚本目前不支持您的系统: $NAME $VERSION"
+      exit 1
+      ;;
+  esac
+}
+
+
+check_and_install_pyyaml() {
+  required_version="5.4.1"
+  installed_version=$(pip3.6 show PyYAML | grep Version | cut -d ' ' -f 2)
+
+  if [ "$installed_version" != "$required_version" ]; then
+    echo "Installing PyYAML version $required_version..."
+    pip3.6 install --ignore-installed PyYAML==$required_version
+  else
+    echo "PyYAML version $required_version is already installed."
+  fi
+}
+add_check_nginx_log_format(){
+
+# 定义路径
+NGINX_CONF="/etc/nginx/nginx.conf"
+NEW_CONF="/opt/ARL/misc/nginx.conf"
+
+# 检查 log_format 是否已存在
+if grep -q 'log_format main' "$NGINX_CONF"; then
+    echo "log_format already exists in $NGINX_CONF. No changes made."
+else
+    echo "log_format not found. Replacing $NGINX_CONF with new configuration..."
+
+    # 备份当前配置文件
+     cp "$NGINX_CONF" "${NGINX_CONF}.bak"
+    
+    # 替换配置文件
+     cp "$NEW_CONF" "$NGINX_CONF"
+fi
+
+}
+
+check_install_docker(){
+if [ -f /etc/os-release ]; then
+    . /etc/os-release
+else
+    echo "无法确定发行版"
+    exit 1
+fi
+if [ "$ID" = "centos" ] ; then
+    if ! command -v docker &> /dev/null;then
+        echo "Docker 未安装，正在进行安装..."
+        sudo yum install -y yum-utils
+        sudo yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
+        sudo yum install docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin -y
+        docker --version
+        check_run_docker
+      else
+        echo "Docker 已经安装"
+        echo "Docker版本为： $(docker --version)"  
+        check_run_docker
+    fi
+elif [ "$ID" == "ubuntu" ]; then
+    if ! command -v docker &> /dev/null;then
+        sudo apt-get update
+        sudo apt-get install ca-certificates curl
+        sudo install -m 0755 -d /etc/apt/keyrings
+        sudo curl -fsSL https://download.docker.com/linux/ubuntu/gpg -o /etc/apt/keyrings/docker.asc
+        sudo chmod a+r /etc/apt/keyrings/docker.asc
+        echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.asc] https://download.docker.com/linux/ubuntu $(. /etc/os-release && echo "$VERSION_CODENAME") stable" | tee /etc/apt/sources.list.d/docker.list
+        sudo apt-get update -y
+        sudo apt-get install docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin -y
+        docker --version
+        check_run_docker
+    fi
+elif [ "$ID" = "debian"]; then
+    if ! command -v docker &> /dev/null;then
+    echo 
+    sudo apt-get update
+    sudo apt-get install ca-certificates curl
+    sudo install -m 0755 -d /etc/apt/keyrings
+    sudo curl -fsSL https://download.docker.com/linux/debian/gpg -o /etc/apt/keyrings/docker.asc
+    sudo chmod a+r /etc/apt/keyrings/docker.asc
+    echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.asc] https://download.docker.com/linux/debian $(. /etc/os-release && echo "$VERSION_CODENAME") stable" | tee /etc/apt/sources.list.d/docker.list
+    sudo apt-get update -y
+    sudo apt-get install docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin -y
+    docker --version
+    check_run_docker
+    
+else
+    echo "不支持的操作系统."
+    exit 1
+fi
+}
+
+check_run_docker() {
+status=$(systemctl is-active docker)
+if [ "$status" = "active" ] ; then
+      echo "Docker运行正常"   
+elif [ "$status" = "inactive" ] || [ "$status" = "unknown" ] ; then
+    echo "Docker 服务未运行，正在尝试启动"
+    run=$(systemctl start docker)
+  if [ "$?" = "0" ] ; then
+        echo "Docker 启动成功"
+    else
+        echo "Docker 启动失败"
+        exit 1
+fi
+else
+    echo "无法确定Docker状态"
+    exit 1
+fi
+}
+
+uninstall_docker(){
+
+# 检查容器是否在运行中，如果是，强制停止容器
+if [ "$(docker ps -aq -f name=arl)" ]; then
+    docker stop arl
+    docker rm -f arl
+    echo "容器 arl 停止"
+fi
+docker rmi moshangms/arl-test:latest
+}
+
+install_for_ubuntu() {
+set -e
+
+echo "cd /opt/"
+
+mkdir -p /opt/
+cd /opt/
+
+echo "deb [ arch=amd64,arm64 signed-by=/usr/share/keyrings/mongodb-server-4.4.gpg ] https://repo.mongodb.org/apt/ubuntu $(. /etc/os-release && echo "$VERSION_CODENAME")/mongodb-org/4.4 multiverse" |  tee /etc/apt/sources.list.d/mongodb-org-4.4.list
+
+  if ! command -v curl &> /dev/null; then
+    echo "install curl ..."
+    apt-get install curl -y
+  fi
+  
+curl -fsSL https://www.mongodb.org/static/pgp/server-4.4.asc | \
+    gpg -o /usr/share/keyrings/mongodb-server-4.4.gpg \
+   --dearmor
+
+  echo "Updating package list..."
+  apt-get update -y
+   apt install software-properties-common
+   add-apt-repository ppa:deadsnakes/ppa
+   apt update -y && apt-get upgrade -y
+
+  echo "Installing dependencies..."
+  apt-get install -y python3.6 mongodb-org rabbitmq-server python3.6-dev g++ git nginx fontconfig \
+  unzip wget gnupg lsb-release python3.6-distutils -y
+
+
+  if [ ! -f /usr/local/bin/pip3.6 ]; then
+    echo "install pip3.6"
+    curl https://bootstrap.pypa.io/pip/3.6/get-pip.py -o get-pip.py
+    python3.6 get-pip.py
+    #国内下载失败可以打开
+    #python3.6 get-pip.py -i https://pypi.tuna.tsinghua.edu.cn/simple
+    pip3.6 --version
+    #pip3.6 config set global.index-url https://pypi.tuna.tsinghua.edu.cn/simple
+    rm -rf get-pip.py
+  fi
+  if ! command -v alien &> /dev/null; then
+    echo "install alien..."
+    apt-get install alien -y
+  fi
+  if ! command -v nmap &> /dev/null; then
+    echo "install nmap-7.93-1 ..."
+    wget https://nmap.org/dist/nmap-7.93-1.x86_64.rpm
+     alien ./nmap-7.93-1.x86_64.rpm
+     dpkg -i nmap_7.93-2_amd64.deb 
+    rm -f nmap-7.93-1.x86_64.rpm
+  fi
+
+  if ! command -v nuclei &> /dev/null; then
+    echo "install nuclei_3.3.0 ..."
+    wget https://github.com/projectdiscovery/nuclei/releases/download/v3.3.0/nuclei_3.3.0_linux_amd64.zip
+    unzip nuclei_3.3.0_linux_amd64.zip && mv nuclei /usr/bin/ && rm -f nuclei_3.3.0_linux_amd64.zip
+    nuclei -ut
+  fi
+
+  if ! command -v wih &> /dev/null; then
+    echo "install wih ..."
+    wget https://raw.githubusercontent.com/msmoshang/arl_files/master/wih/wih_linux_amd64 -O /usr/bin/wih
+    chmod +x /usr/bin/wih
+    wih --version
+  fi
+
+  echo "start services ..."
+  systemctl enable mongod
+  systemctl start mongod
+  systemctl enable rabbitmq-server
+  systemctl start rabbitmq-server
+
+  check_and_install_pyyaml
+
+  if [ ! -d ARL ]; then
+    echo "git clone ARL proj"
+    git clone https://github.com/msmoshang/ARL
+  fi
+
+  if [ ! -d "ARL-NPoC" ]; then
+    echo "git clone ARL-NPoC proj"
+    git clone https://github.com/Aabyss-Team/ARL-NPoC
+  fi
+
+  cd ARL-NPoC
+  echo "install poc requirements ..."
+  pip3.6 install -r requirements.txt
+  pip3.6 install -e .
+  cd ../
+
+  if [ ! -f /usr/local/bin/ncrack ]; then
+    echo "Download ncrack ..."
+    wget https://raw.githubusercontent.com/msmoshang/arl_files/master/ncrack -O /usr/local/bin/ncrack
+    chmod +x /usr/local/bin/ncrack
+  fi
+
+  mkdir -p /usr/local/share/ncrack
+  if [ ! -f /usr/local/share/ncrack/ncrack-services ]; then
+    echo "Download ncrack-services ..."
+    wget https://raw.githubusercontent.com/msmoshang/arl_files/master/ncrack-services -O /usr/local/share/ncrack/ncrack-services
+  fi
+
+  mkdir -p /data/GeoLite2
+  if [ ! -f /data/GeoLite2/GeoLite2-ASN.mmdb ]; then
+    echo "download GeoLite2-ASN.mmdb ..."
+    wget https://git.io/GeoLite2-ASN.mmdb -O /data/GeoLite2/GeoLite2-ASN.mmdb
+  fi
+
+  if [ ! -f /data/GeoLite2/GeoLite2-City.mmdb ]; then
+    echo "download GeoLite2-City.mmdb ..."
+    wget https://git.io/GeoLite2-City.mmdb -O /data/GeoLite2/GeoLite2-City.mmdb
+  fi
+
+  cd ARL
+
+  if [ ! -f rabbitmq_user ]; then
+    echo "add rabbitmq user"
+    rabbitmqctl add_user arl arlpassword
+    rabbitmqctl add_vhost arlv2host
+    rabbitmqctl set_user_tags arl arltag
+    rabbitmqctl set_permissions -p arlv2host arl ".*" ".*" ".*"
+    echo "init arl user"
+    mongo 127.0.0.1:27017/arl docker/mongo-init.js
+    touch rabbitmq_user
+  fi
+
+  echo "install arl requirements ..."
+  pip3.6 install -r requirements.txt
+  if [ ! -f app/config.yaml ]; then
+    echo "create config.yaml"
+    cp app/config.yaml.example app/config.yaml
+  fi
+
+  if [ ! -f /usr/bin/phantomjs ]; then
+    echo "install phantomjs"
+    ln -s `pwd`/app/tools/phantomjs /usr/bin/phantomjs
+  fi
+
+    add_check_nginx_log_format
+
+  if [ ! -f /etc/nginx/sites-available/arl.conf ]; then
+    echo "copy arl.conf"
+    cp misc/arl.conf /etc/nginx/sites-available/arl.conf
+    ln -s /etc/nginx/sites-available/arl.conf /etc/nginx/sites-enabled/
+  fi
+
+  if [ ! -f /etc/ssl/certs/dhparam.pem ]; then
+    echo "download dhparam.pem"
+    curl https://ssl-config.mozilla.org/ffdhe2048.txt > /etc/ssl/certs/dhparam.pem
+  fi
+
+  echo "gen cert ..."
+  chmod +x ./docker/worker/gen_crt.sh
+  ./docker/worker/gen_crt.sh
+
+  nginx -s reload
+
+  cd /opt/ARL/
+
+  if [ ! -f /etc/systemd/system/arl-web.service ]; then
+    echo "copy arl-web.service"
+    cp misc/arl-web.service /etc/systemd/system/
+  fi
+
+  if [ ! -f /etc/systemd/system/arl-worker.service ]; then
+    echo "copy arl-worker.service"
+    cp misc/arl-worker.service /etc/systemd/system/
+  fi
+
+  if [ ! -f /etc/systemd/system/arl-worker-github.service ]; then
+    echo "copy arl-worker-github.service"
+    cp misc/arl-worker-github.service /etc/systemd/system/
+  fi
+
+  if [ ! -f /etc/systemd/system/arl-scheduler.service ]; then
+    echo "copy arl-scheduler.service"
+    cp misc/arl-scheduler.service /etc/systemd/system/
+  fi
+
+    nginx -s reload
+
+  # Give massdns execute permissions
+  echo "massdns run"
+  cd /opt/ARL/app/tools/
+  chmod +x massdns
+
+  echo "start arl services ..."
+  systemctl enable arl-web
+  systemctl start arl-web
+  systemctl enable arl-worker
+  systemctl start arl-worker
+  systemctl enable arl-worker-github
+  systemctl start arl-worker-github
+  systemctl enable arl-scheduler
+  systemctl start arl-scheduler
+  systemctl enable nginx
+  systemctl start nginx
+
+    # Add fingerprint
+  cd /opt/ARL/misc
+  if [ -s /opt/ARL/misc/ARL-Finger-ADD.py ] && [ -s /opt/ARL/misc/finger.json ]; then
+    echo "ADD finger"
+    python3.6 ARL-Finger-ADD.py https://127.0.0.1:5003/ admin arlpass
+  fi
+
+
+  echo "Checking services status..."
+  systemctl status mongod
+  systemctl status rabbitmq-server
+  systemctl status arl-web
+  systemctl status arl-worker
+  systemctl status arl-worker-github
+  systemctl status arl-scheduler
+  systemctl status nginx
+
+  echo "install done"
+}
+
+install_for_centos() {
+
+echo "cd /opt/"
+
+mkdir -p /opt/
+cd /opt/
+
+tee /etc/yum.repos.d/mongodb-org-4.0.repo <<"EOF"
+[mongodb-org-4.0]
+name=MongoDB Repository
+baseurl=https://repo.mongodb.org/yum/redhat/$releasever/mongodb-org/4.0/x86_64/
+gpgcheck=1
+enabled=1
+gpgkey=https://www.mongodb.org/static/pgp/server-4.0.asc
+EOF
+
+echo "install dependencies ..."
+yum install epel-release -y
+yum install python36 mongodb-org-server mongodb-org-shell rabbitmq-server python36-devel gcc-c++ git \
+ nginx  fontconfig wqy-microhei-fonts unzip wget -y
+
+if [ ! -f /usr/bin/python3.6 ]; then
+  echo "link python3.6"
+  ln -s /usr/bin/python36 /usr/bin/python3.6
+fi
+
+if [ ! -f /usr/local/bin/pip3.6 ]; then
+  echo "install  pip3.6"
+  python3.6 -m ensurepip --default-pip
+  python3.6 -m pip install --upgrade pip
+  #python3.6 -m pip install --upgrade pip -i https://pypi.tuna.tsinghua.edu.cn/simple
+  #pip3.6 config set global.index-url https://pypi.tuna.tsinghua.edu.cn/simple
+  pip3.6 --version
+fi
+
+if ! command -v nmap &> /dev/null
+then
+    echo "install nmap-7.93-1 ..."
+    rpm -vhU https://nmap.org/dist/nmap-7.93-1.x86_64.rpm
+fi
+
+
+if ! command -v nuclei &> /dev/null
+then
+  echo "install nuclei_3.3.0 ..."
+  wget https://github.com/projectdiscovery/nuclei/releases/download/v3.3.0/nuclei_3.3.0_linux_amd64.zip
+  unzip nuclei_3.3.0_linux_amd64.zip && mv nuclei /usr/bin/ && rm -f nuclei_3.3.0_linux_amd64.zip
+  nuclei -ut
+fi
+
+if ! command -v wih &> /dev/null
+then
+  echo "install wih ..."
+  ## 安装 WIH
+  wget https://raw.githubusercontent.com/msmoshang/arl_files/master/wih/wih_linux_amd64 -O /usr/bin/wih && chmod +x /usr/bin/wih
+  wih --version
+fi
+
+
+echo "start services ..."
+systemctl enable mongod
+systemctl start mongod
+systemctl enable rabbitmq-server
+systemctl start rabbitmq-server
+
+
+if [ ! -d ARL ]; then
+  echo "git clone ARL proj"
+  git clone https://github.com/msmoshang/ARL
+fi
+
+if [ ! -d "ARL-NPoC" ]; then
+  echo "git clone ARL-NPoC proj"
+  git clone https://github.com/Aabyss-Team/ARL-NPoC
+fi
+
+cd ARL-NPoC
+echo "install poc requirements ..."
+pip3.6 install -r requirements.txt
+pip3.6 install -e .
+cd ../
+
+if [ ! -f /usr/local/bin/ncrack ]; then
+  echo "Download ncrack ..."
+  wget https://raw.githubusercontent.com/msmoshang/arl_files/master/ncrack -O /usr/local/bin/ncrack
+  chmod +x /usr/local/bin/ncrack
+fi
+
+mkdir -p /usr/local/share/ncrack
+if [ ! -f /usr/local/share/ncrack/ncrack-services ]; then
+  echo "Download ncrack-services ..."
+  wget https://raw.githubusercontent.com/msmoshang/arl_files/master/ncrack-services -O /usr/local/share/ncrack/ncrack-services
+fi
+
+mkdir -p /data/GeoLite2
+if [ ! -f /data/GeoLite2/GeoLite2-ASN.mmdb ]; then
+  echo "download GeoLite2-ASN.mmdb ..."
+  wget https://git.io/GeoLite2-ASN.mmdb -O /data/GeoLite2/GeoLite2-ASN.mmdb
+fi
+
+if [ ! -f /data/GeoLite2/GeoLite2-City.mmdb ]; then
+  echo "download GeoLite2-City.mmdb ..."
+  wget https://git.io/GeoLite2-City.mmdb -O /data/GeoLite2/GeoLite2-City.mmdb
+fi
+
+cd ARL
+
+if [ ! -f rabbitmq_user ]; then
+  echo "add rabbitmq user"
+  rabbitmqctl add_user arl arlpassword
+  rabbitmqctl add_vhost arlv2host
+  rabbitmqctl set_user_tags arl arltag
+  rabbitmqctl set_permissions -p arlv2host arl ".*" ".*" ".*"
+  echo "init arl user"
+  mongo 127.0.0.1:27017/arl docker/mongo-init.js
+  touch rabbitmq_user
+fi
+
+echo "install arl requirements ..."
+pip3.6 install -r requirements.txt
+if [ ! -f app/config.yaml ]; then
+  echo "create config.yaml"
+  cp app/config.yaml.example  app/config.yaml
+fi
+
+if [ ! -f /usr/bin/phantomjs ]; then
+  echo "install phantomjs"
+  ln -s `pwd`/app/tools/phantomjs  /usr/bin/phantomjs
+fi
+
+if [ ! -f /etc/nginx/conf.d/arl.conf ]; then
+  echo "copy arl.conf"
+  cp misc/arl.conf /etc/nginx/conf.d
+fi
+
+
+
+if [ ! -f /etc/ssl/certs/dhparam.pem ]; then
+  echo "download dhparam.pem"
+  curl https://ssl-config.mozilla.org/ffdhe2048.txt > /etc/ssl/certs/dhparam.pem
+fi
+
+
+echo "gen cert ..."
+chmod +x ./docker/worker/gen_crt.sh
+./docker/worker/gen_crt.sh
+
+
+cd /opt/ARL/
+
+
+if [ ! -f /etc/systemd/system/arl-web.service ]; then
+  echo  "copy arl-web.service"
+  cp misc/arl-web.service /etc/systemd/system/
+fi
+
+if [ ! -f /etc/systemd/system/arl-worker.service ]; then
+  echo  "copy arl-worker.service"
+  cp misc/arl-worker.service /etc/systemd/system/
+fi
+
+
+if [ ! -f /etc/systemd/system/arl-worker-github.service ]; then
+  echo  "copy arl-worker-github.service"
+  cp misc/arl-worker-github.service /etc/systemd/system/
+fi
+
+if [ ! -f /etc/systemd/system/arl-scheduler.service ]; then
+  echo  "copy arl-scheduler.service"
+  cp misc/arl-scheduler.service /etc/systemd/system/
+fi
+
+  nginx -s reload
+ 
+#给massdns添加执行权限
+echo "massdns run"
+cd /opt/ARL/app/tools/
+chmod +x massdns
+
+echo "start arl services ..."
+systemctl enable arl-web
+systemctl start arl-web
+systemctl enable arl-worker
+systemctl start arl-worker
+systemctl enable arl-worker-github
+systemctl start arl-worker-github
+systemctl enable arl-scheduler
+systemctl start arl-scheduler
+systemctl enable nginx
+systemctl start nginx
+
+
+    # Add fingerprint
+  cd /opt/ARL/misc
+  if [ -s /opt/ARL/misc/ARL-Finger-ADD.py ] && [ -s /opt/ARL/misc/finger.json ]; then
+    echo "ADD finger"
+    python3.6 ARL-Finger-ADD.py https://127.0.0.1:5003/ admin arlpass
+  fi
+
+systemctl status arl-web
+systemctl status arl-worker
+systemctl status arl-worker-github
+systemctl status arl-scheduler
+
+echo "install done"
+
+}
+
+code_install(){
+fixed_check_osver
+case "$os_ver" in
+    "CentOS Linux 7")
+        if [ "$VERSION_ID" == "7" ]; then
+            echo "$os_ver"
+            check_selinux
+            install_for_centos
+        else
+            echo "暂时仅支持CentOS 7"
+            exit 1
+        fi
+        ;;
+    "Ubuntu 20.04")
+        if [ "$VERSION_ID" == "20.04" ]; then
+            echo ""$os_ver""
+            install_for_ubuntu
+        else
+            echo "暂时仅支持Ubuntu 20.04"
+            exit 1
+        fi
+        ;;
+    *)
+        echo "不支持的操作系统"
+        exit 1
+        ;;
+esac
+}
+
+docker_install_menu(){
+echo "请选择要安装的版本："
+echo "1) arl-docker/moshangms：ARL初始版本，仅去除域名限制,5000+指纹"
+echo "2) arl-docker-initial：ARL初始版本，仅去除域名限制。"
+echo "3) arl-docker-all：ARL完全指纹版本，去除域名限制，全量 7165 条指纹。"
+read -p "请输入选项（1-2）：" version_choice
+case $version_choice in
+    1)
+        echo "正在拉取 Docker 镜像：arl-docker-initial..."
+        docker pull moshangms/arl-test:latest
+        echo "正在运行 Docker 容器..."
+        docker run -d -p 5003:5003 --name arl --privileged=true moshangms/arl-test  /usr/sbin/init
+        docker exec -it arl /bin/bash -c "
+        rabbitmqctl add_user arl arlpassword
+        rabbitmqctl set_user_tags arl administrator
+        rabbitmqctl add_vhost arlv2host
+        rabbitmqctl set_permissions -p arlv2host arl '.*' '.*' '.*'
+        "
+        ;;
+    2)
+        echo "正在拉取 Docker 镜像：arl-docker-initial..."
+        docker pull honmashironeko/arl-docker-initial
+        echo "正在运行 Docker 容器..."
+        docker run -d -p 5003:5003 --name arl --privileged=true honmashironeko/arl-docker-initial /usr/sbin/init
+        ;;
+    3)
+        echo "正在拉取 Docker 镜像：arl-docker-all..."
+        docker pull honmashironeko/arl-docker-all
+        echo "正在运行 Docker 容器..."
+        docker run -d -p 5003:5003 --name arl --privileged=true honmashironeko/arl-docker-all /usr/sbin/init
+        ;;
+    *)
+        echo "无效的输入，脚本将退出。"
+        exit 1
+        ;;
+esac
+}
+
+
+main_menu(){
+echo -e "1) 源码安装，检测系统版本中...(暂时只支持centos7 and Ubuntu20.04)"
+echo -e "2) docker安装"
+echo -e "3) 卸载Docker镜像"
+echo -e "4) 退出脚本"
+echo "---------------------------------------------------------------"
+read -e -p "输入对应数字:" code_id
+
+case $code_id in
+    1)
+        code_install
+        ;;
+    2)
+        check_install_docker
+        docker_install_menu
+        ;;
+    3)
+        echo "暂时未完成"
+        uninstall_docker
+        ;;
+    4)
+        exit 1
+        ;;
+    *)
+        echo "输入了无效的选择。请重新选择1-4的选项."
+        sleep 2; main_menu
+        ;;
+esac
+}
+
+main_menu