Need codec-image-transport to decode the streamed video via h264 protocal
$ sudo apt install ros-melodic-codec-image-transport
Need camera-info-manager-py to build this package
$ sudo apt install ros-melodic-camera-info-manager-py
$ cd <CATKIN_WS/SRC>
$ git clone --recursive https://github.com/surfii3z/tello_driver.git
$ cd ..
$ catkin build
$ source devel/setup.bash
Communicating with the Tello drone can be done either using official Tello SDK or one of the unofficial libraries. The unofficial libraries originated from the reverse-engineering the raw packages broadcasted by the Tello. This ROS package is build on top of the unofficial TelloPy library. The TelloPy library is used at this moment since it offers more functionalities than the official Tello SDK or any other unofficial library.
Developing of the tello_driver ROS package is inspired by tello_driver, which by now diverged considerately from the original work. Furthermore, development of this ROS package pursues not to modify the TelloPy library, but instead apply any modification or addition to the ros_driver package in an encapsulated manner. This prevents breaking functionalities when updating the TelloPy library.
- Turn on Tello drone
- Connect to drone's WiFi access point (
TELLO_XXXXXX)
$ roslaunch tello_driver tello_node.launch
$ roslaunch tello_driver joy_teleop.launch
Main node running as interface for the TelloPy library
/tello/cmd_vel
geometry_msgs/Twist/tello/emergency
std_msgs/Empty/tello/fast_mode
std_msgs/Empty/tello/flattrim
std_msgs/Empty/tello/flip
std_msgs/Uint8/tello/land
std_msgs/Empty/tello/palm_land
std_msgs/Empty/tello/takeoff
std_msgs/Empty/tello/manual_takeoff
std_msgs/Empty/tello/throw_takeoff
std_msgs/Empty
/tello/camera/camera_info
sensor_msgs/CameraInfo/tello/image_raw
sensor_msgs/Image/tello/imag/raw/h264
h264_image_transport/H264Packetsensor_msgs/CompressedImage/tello/odom
nav_msgs/Odometry/tello/imu
sensor_msgs/Imu/tello/status
tello_driver/TelloStatus
TODO
~/tello_driver_node/connect_timeout_sec
~/tello_driver_node/fixed_video_rate
~/tello_driver_node/local_cmd_client_port
~/tello_driver_node/local_vid_server_port
~/tello_driver_node/stream_h264_video
~/tello_driver_node/tello_cmd_server_port
~/tello_driver_node/tello_ip
~/tello_driver_node/vel_cmd_scale
~/tello_driver_node/video_req_sps_hz
~/tello_driver_node/altitude_limit
~/tello_driver_node/attitude_limit
~/tello_driver_node/low_bat_threshold
Converting gamepad input controls from joy_node
to commands for tello_driver_node
/joy
sensor_msgs/Joy/tello/agent_cmd_vel_in
geometry_msgs/Twist
/tello/cmd_vel
geometry_msgs/Twist/tello/emergency
std_msgs/Empty/tello/fast_mode
std_msgs/Empty/tello/flattrim
std_msgs/Empty/tello/flip
std_msgs/Uint8/tello/land
std_msgs/Empty/tello/palm_land
std_msgs/Empty/tello/takeoff
std_msgs/Empty/tello/throw_takeoff
std_msgs/Empty
None
Receive input from gamepad controller and publish into sensor_msgs/Joy
message
None
/joy
sensor_msgs/Joy
None
~/joy_node/deadzone
~/joy_node/dev
- No more video output after reconnect
Relaunch thetello_driver_node
to continue the video stream after WiFi reconnection. Only an issue when using PyAV to decode h264 video instead of ROS codec_image_transport.
-
Stream raw video
Depends on PyAV package:$ pip install av --user
Installation of PyAV on Ubuntu 16.04 requires ffmpeg of at least version 3:
$ sudo add-apt-repository ppa:jonathonf/ffmpeg-3
$ sudo apt update && sudo apt install ffmpeg