ZIP: 239 Title: Relay of Version 5 Transactions Owners: Daira Hopwood <[email protected]> Jack Grigg <[email protected]> Status: Final Category: Network Created: 2021-05-29 License: MIT Discussions-To: <https://github.com/zcash/zips/issues/515> Pull-Request: <https://github.com/zcash/zips/pull/516>
The key words "MUST", "MUST NOT", "SHOULD", "SHOULD NOT", and "RECOMMENDED" in this document are to be interpreted as described in RFC 2119. [1]
The term "network upgrade" in this document is to be interpreted as described in ZIP 200. [4]
The terms "Testnet" and "Mainnet" are to be interpreted as described in section 3.12 of the Zcash Protocol Specification [2].
The term "txid" means a transaction identifier, computed as a SHA-256d hash of the transaction data for v4 and earlier transactions, or as specified in [6] for v5 and later transactions.
The term "authorizing data commitment" (denoted auth_digest), defined only for v5
and later transactions, is to be interpreted as described in [6].
The term "witnessed transaction identifier" ("wtxid"), defined only for v5 and later transactions, is a 64-byte value given by concatenating the txid and the authorizing data commitment of the transaction.
This ZIP describes changes to the Zcash peer-to-peer protocol to support transaction relay based on a transaction's authorizing data commitment as well as its txid.
Historically, as in Bitcoin, the inv and getdata messages sent on the Zcash
peer-to-peer network to announce or request transactions have referred to those
transactions by txid.
Prior to the introduction of v5 transactions [5] in the NU5 network upgrade [7], a txid was always defined as the SHA-256d hash of the transaction data, the encoding of which is the same in block data and in the peer-to-peer protocol.
For v5 transactions, a new transaction digest algorithm is defined that constructs the txid from a tree of hashes, which include only effecting data [6]. Witness data is committed to by a separate "authorizing data commitment". Unlike previous transaction versions, the format of serialized v5 transaction data is not consensus-critical.
Not committing to the witness data in v5 transaction announcements would create inefficiencies: because a v5 transaction's witness can be malleated without altering the txid, a node in receipt of a v5 transaction that the node does not accept would generally still have to download that same transaction when announced by other peers. This is because the alternative — of not downloading a v5 transaction with a given txid after rejecting a previous transaction with that txid — would allow a third party to interfere with transaction relay by malleating a transaction's witness and announcing the resulting invalid transaction to nodes, preventing relay of the valid version of the transaction as well.
This inefficiency was present in Bitcoin for almost 3 years after activation of its Segwit upgrade [8], until the adoption of BIP 339 [9]. The latter BIP specifies a way to use the Segwit "wtxid" (which commits to both effecting and witness data) in place of the txid when announcing and fetching transactions. In Zcash, the analogous identifier is also called the wtxid, but it encodes the pair (txid, auth_digest).
This ZIP is modelled after BIP 339: it adds a MSG_WTX inv type to the peer-to-peer
protocol, analogous to BIP 339's MSG_WTX inv type, that announces transactions by
their wtxid. Note that the encoding and length of a Zcash wtxid is different to that
of a Bitcoin wtxid.
This ZIP does not introduce any equivalent of BIP 339's wtxidrelay message,
since that is not needed for compatibility given that Zcash full nodes are required to
support MSG_WTX based on the negotiated peer protocol version (see Deployment).
A new inv type MSG_WTX (0x00000005) is added, for use in both inv messages
and getdata requests, indicating that the hash being referenced is the wtxid
(i.e. the 64-byte value txid || auth_digest). This inv type MUST be used
when announcing v5 transactions. The txid and auth_digest are as defined in
[6].
In the case of getdata requests, the format of a v5 transaction obtained by a
MSG_WTX inv type is as given in the Zcash protocol specification.
[3]
An inv or getdata message MUST NOT use the MSG_WTX inv type for v4
or earlier transactions, or on peer connections that have not negotiated at least
the peer protocol version specified in Deployment.
Note that MSG_WTX might also be used for future transaction versions after v5.
Since such versions are not currently consensus-valid, this is left unspecified
for now.
MSG_TX and MSG_WTX entries may be mixed in arbitrary order in an inv
message or a getdata message. Since these entry types are of different lengths
(36 bytes or 68 bytes respectively including the 4-byte type field), this implies
that the size of the message is not determined by its initial count field, and
has to be determined by parsing the whole message.
This ZIP is assumed to be deployed in advance of the network upgrade that introduces v5 transactions, i.e. NU5.
The peer protocol version that enables support for this specification is defined to be 170014 (on both Testnet and Mainnet). This is in advance of the minimum protocol version that signals support for NU5 on Testnet. [7]
As specified in [4], a node that supports a network upgrade will clear its
mempool when reaching the block before that upgrade's activation block. Before this
point, the node will not accept transactions into its mempool that are invalid
according to the pre-upgrade consensus protocol (so, in this case, it would not
accept v5 transactions). This means that a correctly functioning node will not
use the MSG_WTX inv type until it has received the block preceding the NU5
network upgrade.
Nevertheless, it is possible for a node to receive an inv or getdata message
containing an inventory entry of type MSG_WTX, on a peer connection that has
negotiated protocol version 170014 or later, before NU5 has activated. In this case,
the node MUST NOT advertise, fetch, or provide v5 transactions.
Note that the behaviour of a node receiving an inv or getdata message with
one or more inventory entries of an unrecognized type was previously unspecified.
The behaviour of zcashd in such a case was to assume that the length of each
inventory entry is 36 bytes (including the type field), regardless of the type.
This would result in misparsing the inv or getdata message if the length of
the corresponding inventory entry were not 36 bytes.
The RECOMMENDED behaviour is to parse the inv or getdata message completely,
and reject the message if it contains any inventory entries of an unrecognized type.
For a getdata message, the set of recognized inventory types, and corresponding
entry lengths including the type field, is:
MSG_TX(36 bytes);MSG_BLOCK(36 bytes);MSG_FILTERED_BLOCK(36 bytes);- [provided version 170014 or later has been negotiated]
MSG_WTX(68 bytes).
For an inv message, the set of recognized inventory types is the same, but the
MSG_FILTERED_BLOCK type has no useful purpose. Senders of inv messages
SHOULD NOT include MSG_FILTERED_BLOCK entries. In order to allow using the same
parser for the two message types, a node receiving a MSG_FILTERED_BLOCK entry
in an inv message SHOULD ignore it.
As the MSG_WTX inv type is only enabled between peers that both support it,
older clients remain fully compatible and interoperable before NU5 activates, or on
a chain in which it does not activate.
Further information on how zcashd handles data propagation in the peer-to-peer network is given in [12].
A previous draft of this ZIP left as an open question whether to redefine inv and
getdata to segregate MSG_TX and MSG_WTX. This could potentially have made
these messages simpler or more efficient to parse, by avoiding variable-length entries
in the message data. (See [10] and [11] for how inv and getdata
respectively are currently defined in Bitcoin.)
This option was rejected because the current specification is simple enough.
This ZIP is partly based on BIP 339, written by Suhas Daftuar. [9]
| [1] | RFC 2119: Key words for use in RFCs to Indicate Requirement Levels |
| [2] | Zcash Protocol Specification, Version 2021.2.16 [NU5 proposal]. Section 3.12 Mainnet and Testnet |
| [3] | Zcash Protocol Specification, Version 2021.2.16 [NU5 proposal]. Section 7.1: Transaction Encoding and Consensus |
| [4] | (1, 2) ZIP 200: Network Upgrade Mechanism |
| [5] | ZIP 225: Version 5 Transaction Format |
| [6] | (1, 2, 3, 4) ZIP 244: Transaction Identifier Non-Malleability |
| [7] | (1, 2) ZIP 252: Deployment of the NU5 Network Upgrade |
| [8] | BIP 141: Segregated Witness (Consensus layer) |
| [9] | (1, 2) BIP 339: WTXID-based transaction relay |
| [10] | Bitcoin Developer Reference: P2P Network — Inv |
| [11] | Bitcoin Developer Reference: P2P Network — GetData |
| [12] | zcashd book: P2P data propagation |