- Introduction
- Custom types
- Constants
- Preset
- Helper functions
This document specifies basic polynomial operations and KZG polynomial commitment operations as they are needed for the EIP-4844 specification. The implementations are not optimized for performance, but readability. All practical implementations should optimize the polynomial operations.
Functions flagged as "Public method" MUST be provided by the underlying KZG library as public functions. All other functions are private functions used internally by the KZG library.
| Name | SSZ equivalent | Description |
|---|---|---|
G1Point |
Bytes48 |
|
G2Point |
Bytes96 |
|
BLSFieldElement |
uint256 |
x < BLS_MODULUS |
KZGCommitment |
Bytes48 |
Same as BLS standard "is valid pubkey" check but also allows 0x00..00 for point-at-infinity |
KZGProof |
Bytes48 |
Same as for KZGCommitment |
Polynomial |
Vector[BLSFieldElement, FIELD_ELEMENTS_PER_BLOB] |
a polynomial in evaluation form |
Blob |
ByteVector[BYTES_PER_FIELD_ELEMENT * FIELD_ELEMENTS_PER_BLOB] |
a basic blob data |
| Name | Value | Notes |
|---|---|---|
BLS_MODULUS |
52435875175126190479447740508185965837690552500527637822603658699938581184513 |
Scalar field modulus of BLS12-381 |
BYTES_PER_FIELD_ELEMENT |
uint64(32) |
Bytes used to encode a BLS scalar field element |
| Name | Value |
|---|---|
FIELD_ELEMENTS_PER_BLOB |
uint64(4096) |
FIAT_SHAMIR_PROTOCOL_DOMAIN |
b'FSBLOBVERIFY_V1_' |
| Name | Value | Notes |
|---|---|---|
ROOTS_OF_UNITY |
Vector[BLSFieldElement, FIELD_ELEMENTS_PER_BLOB] |
Roots of unity of order FIELD_ELEMENTS_PER_BLOB over the BLS12-381 field |
The trusted setup is part of the preset: during testing a minimal insecure variant may be used,
but reusing the mainnet settings in public networks is a critical security requirement.
| Name | Value |
|---|---|
KZG_SETUP_G2_LENGTH |
65 |
KZG_SETUP_G1 |
Vector[G1Point, FIELD_ELEMENTS_PER_BLOB], contents TBD |
KZG_SETUP_G2 |
Vector[G2Point, KZG_SETUP_G2_LENGTH], contents TBD |
KZG_SETUP_LAGRANGE |
Vector[KZGCommitment, FIELD_ELEMENTS_PER_BLOB], contents TBD |
All polynomials (which are always given in Lagrange form) should be interpreted as being in
bit-reversal permutation. In practice, clients can implement this by storing the lists
KZG_SETUP_LAGRANGE and ROOTS_OF_UNITY in bit-reversal permutation, so these functions only
have to be called once at startup.
def is_power_of_two(value: int) -> bool:
"""
Check if ``value`` is a power of two integer.
"""
return (value > 0) and (value & (value - 1) == 0)def reverse_bits(n: int, order: int) -> int:
"""
Reverse the bit order of an integer ``n``.
"""
assert is_power_of_two(order)
# Convert n to binary with the same number of bits as "order" - 1, then reverse its bit order
return int(('{:0' + str(order.bit_length() - 1) + 'b}').format(n)[::-1], 2)def bit_reversal_permutation(sequence: Sequence[T]) -> Sequence[T]:
"""
Return a copy with bit-reversed permutation. The permutation is an involution (inverts itself).
The input and output are a sequence of generic type ``T`` objects.
"""
return [sequence[reverse_bits(i, len(sequence))] for i in range(len(sequence))]def hash_to_bls_field(data: bytes) -> BLSFieldElement:
"""
Hash ``data`` and convert the output to a BLS scalar field element.
The output is not uniform over the BLS field.
"""
hashed_data = hash(data)
return BLSFieldElement(int.from_bytes(hashed_data, ENDIANNESS) % BLS_MODULUS)def bytes_to_bls_field(b: Bytes32) -> BLSFieldElement:
"""
Convert 32-byte value to a BLS scalar field element.
This function does not accept inputs greater than the BLS modulus.
"""
field_element = int.from_bytes(b, ENDIANNESS)
assert field_element < BLS_MODULUS
return BLSFieldElement(field_element)def blob_to_polynomial(blob: Blob) -> Polynomial:
"""
Convert a blob to list of BLS field scalars.
"""
polynomial = Polynomial()
for i in range(FIELD_ELEMENTS_PER_BLOB):
value = bytes_to_bls_field(blob[i * BYTES_PER_FIELD_ELEMENT: (i + 1) * BYTES_PER_FIELD_ELEMENT])
polynomial[i] = value
return polynomialdef compute_challenges(polynomials: Sequence[Polynomial],
commitments: Sequence[KZGCommitment]) -> Tuple[Sequence[BLSFieldElement], BLSFieldElement]:
"""
Return the Fiat-Shamir challenges required by the rest of the protocol.
The Fiat-Shamir logic works as per the following pseudocode:
hashed_data = hash(DOMAIN_SEPARATOR, polynomials, commitments)
r = hash(hashed_data, 0)
r_powers = [1, r, r**2, r**3, ...]
eval_challenge = hash(hashed_data, 1)
Then return `r_powers` and `eval_challenge` after converting them to BLS field elements.
The resulting field elements are not uniform over the BLS field.
"""
# Append the number of polynomials and the degree of each polynomial as a domain separator
num_polynomials = int.to_bytes(len(polynomials), 8, ENDIANNESS)
degree_poly = int.to_bytes(FIELD_ELEMENTS_PER_BLOB, 8, ENDIANNESS)
data = FIAT_SHAMIR_PROTOCOL_DOMAIN + degree_poly + num_polynomials
# Append each polynomial which is composed by field elements
for poly in polynomials:
for field_element in poly:
data += int.to_bytes(field_element, BYTES_PER_FIELD_ELEMENT, ENDIANNESS)
# Append serialized G1 points
for commitment in commitments:
data += commitment
# Transcript has been prepared: time to create the challenges
hashed_data = hash(data)
r = hash_to_bls_field(hashed_data + b'\x00')
r_powers = compute_powers(r, len(commitments))
eval_challenge = hash_to_bls_field(hashed_data + b'\x01')
return r_powers, eval_challengedef bls_modular_inverse(x: BLSFieldElement) -> BLSFieldElement:
"""
Compute the modular inverse of x
i.e. return y such that x * y % BLS_MODULUS == 1 and return 0 for x == 0
"""
return BLSFieldElement(pow(x, -1, BLS_MODULUS)) if x != 0 else BLSFieldElement(0)def div(x: BLSFieldElement, y: BLSFieldElement) -> BLSFieldElement:
"""
Divide two field elements: ``x`` by `y``.
"""
return BLSFieldElement((int(x) * int(bls_modular_inverse(y))) % BLS_MODULUS)def g1_lincomb(points: Sequence[KZGCommitment], scalars: Sequence[BLSFieldElement]) -> KZGCommitment:
"""
BLS multiscalar multiplication. This function can be optimized using Pippenger's algorithm and variants.
"""
assert len(points) == len(scalars)
result = bls.Z1
for x, a in zip(points, scalars):
result = bls.add(result, bls.multiply(bls.bytes48_to_G1(x), a))
return KZGCommitment(bls.G1_to_bytes48(result))def poly_lincomb(polys: Sequence[Polynomial],
scalars: Sequence[BLSFieldElement]) -> Polynomial:
"""
Given a list of ``polynomials``, interpret it as a 2D matrix and compute the linear combination
of each column with `scalars`: return the resulting polynomials.
"""
assert len(polys) == len(scalars)
result = [0] * FIELD_ELEMENTS_PER_BLOB
for v, s in zip(polys, scalars):
for i, x in enumerate(v):
result[i] = (result[i] + int(s) * int(x)) % BLS_MODULUS
return Polynomial([BLSFieldElement(x) for x in result])def compute_powers(x: BLSFieldElement, n: uint64) -> Sequence[BLSFieldElement]:
"""
Return ``x`` to power of [0, n-1], if n > 0. When n==0, an empty array is returned.
"""
current_power = 1
powers = []
for _ in range(n):
powers.append(BLSFieldElement(current_power))
current_power = current_power * int(x) % BLS_MODULUS
return powersdef evaluate_polynomial_in_evaluation_form(polynomial: Polynomial,
z: BLSFieldElement) -> BLSFieldElement:
"""
Evaluate a polynomial (in evaluation form) at an arbitrary point ``z`` that is not in the domain.
Uses the barycentric formula:
f(z) = (z**WIDTH - 1) / WIDTH * sum_(i=0)^WIDTH (f(DOMAIN[i]) * DOMAIN[i]) / (z - DOMAIN[i])
"""
width = len(polynomial)
assert width == FIELD_ELEMENTS_PER_BLOB
inverse_width = bls_modular_inverse(BLSFieldElement(width))
# Make sure we won't divide by zero during division
assert z not in ROOTS_OF_UNITY
roots_of_unity_brp = bit_reversal_permutation(ROOTS_OF_UNITY)
result = 0
for i in range(width):
a = BLSFieldElement(int(polynomial[i]) * int(roots_of_unity_brp[i]) % BLS_MODULUS)
b = BLSFieldElement((int(BLS_MODULUS) + int(z) - int(roots_of_unity_brp[i])) % BLS_MODULUS)
result += int(div(a, b) % BLS_MODULUS)
result = result * int(pow(z, width, BLS_MODULUS) - 1) * int(inverse_width)
return BLSFieldElement(result % BLS_MODULUS)KZG core functions. These are also defined in EIP-4844 execution specs.
def blob_to_kzg_commitment(blob: Blob) -> KZGCommitment:
"""
Public method.
"""
return g1_lincomb(bit_reversal_permutation(KZG_SETUP_LAGRANGE), blob_to_polynomial(blob))def verify_kzg_proof(polynomial_kzg: KZGCommitment,
z: Bytes32,
y: Bytes32,
kzg_proof: KZGProof) -> bool:
"""
Verify KZG proof that ``p(z) == y`` where ``p(z)`` is the polynomial represented by ``polynomial_kzg``.
Receives inputs as bytes.
Public method.
"""
return verify_kzg_proof_impl(polynomial_kzg, bytes_to_bls_field(z), bytes_to_bls_field(y), kzg_proof)def verify_kzg_proof_impl(polynomial_kzg: KZGCommitment,
z: BLSFieldElement,
y: BLSFieldElement,
kzg_proof: KZGProof) -> bool:
"""
Verify KZG proof that ``p(z) == y`` where ``p(z)`` is the polynomial represented by ``polynomial_kzg``.
"""
# Verify: P - y = Q * (X - z)
X_minus_z = bls.add(bls.bytes96_to_G2(KZG_SETUP_G2[1]), bls.multiply(bls.G2, BLS_MODULUS - z))
P_minus_y = bls.add(bls.bytes48_to_G1(polynomial_kzg), bls.multiply(bls.G1, BLS_MODULUS - y))
return bls.pairing_check([
[P_minus_y, bls.neg(bls.G2)],
[bls.bytes48_to_G1(kzg_proof), X_minus_z]
])def compute_kzg_proof(polynomial: Polynomial, z: BLSFieldElement) -> KZGProof:
"""
Compute KZG proof at point `z` with `polynomial` being in evaluation form
Do this by computing the quotient polynomial in evaluation form: q(x) = (p(x) - p(z)) / (x - z)
"""
y = evaluate_polynomial_in_evaluation_form(polynomial, z)
polynomial_shifted = [BLSFieldElement((int(p) - int(y)) % BLS_MODULUS) for p in polynomial]
# Make sure we won't divide by zero during division
assert z not in ROOTS_OF_UNITY
denominator_poly = [BLSFieldElement((int(x) - int(z)) % BLS_MODULUS)
for x in bit_reversal_permutation(ROOTS_OF_UNITY)]
# Calculate quotient polynomial by doing point-by-point division
quotient_polynomial = [div(a, b) for a, b in zip(polynomial_shifted, denominator_poly)]
return KZGProof(g1_lincomb(bit_reversal_permutation(KZG_SETUP_LAGRANGE), quotient_polynomial))def compute_aggregated_poly_and_commitment(
blobs: Sequence[Blob],
kzg_commitments: Sequence[KZGCommitment]) -> Tuple[Polynomial, KZGCommitment, BLSFieldElement]:
"""
Return (1) the aggregated polynomial, (2) the aggregated KZG commitment,
and (3) the polynomial evaluation random challenge.
This function should also work with blobs == [] and kzg_commitments == []
"""
assert len(blobs) == len(kzg_commitments)
# Convert blobs to polynomials
polynomials = [blob_to_polynomial(blob) for blob in blobs]
# Generate random linear combination and evaluation challenges
r_powers, evaluation_challenge = compute_challenges(polynomials, kzg_commitments)
# Create aggregated polynomial in evaluation form
aggregated_poly = poly_lincomb(polynomials, r_powers)
# Compute commitment to aggregated polynomial
aggregated_poly_commitment = KZGCommitment(g1_lincomb(kzg_commitments, r_powers))
return aggregated_poly, aggregated_poly_commitment, evaluation_challengedef compute_aggregate_kzg_proof(blobs: Sequence[Blob]) -> KZGProof:
"""
Given a list of blobs, return the aggregated KZG proof that is used to verify them against their commitments.
Public method.
"""
commitments = [blob_to_kzg_commitment(blob) for blob in blobs]
aggregated_poly, aggregated_poly_commitment, evaluation_challenge = compute_aggregated_poly_and_commitment(
blobs,
commitments
)
return compute_kzg_proof(aggregated_poly, evaluation_challenge)def verify_aggregate_kzg_proof(blobs: Sequence[Blob],
expected_kzg_commitments: Sequence[KZGCommitment],
kzg_aggregated_proof: KZGProof) -> bool:
"""
Given a list of blobs and an aggregated KZG proof, verify that they correspond to the provided commitments.
Public method.
"""
aggregated_poly, aggregated_poly_commitment, evaluation_challenge = compute_aggregated_poly_and_commitment(
blobs,
expected_kzg_commitments,
)
# Evaluate aggregated polynomial at `evaluation_challenge` (evaluation function checks for div-by-zero)
y = evaluate_polynomial_in_evaluation_form(aggregated_poly, evaluation_challenge)
# Verify aggregated proof
return verify_kzg_proof_impl(aggregated_poly_commitment, evaluation_challenge, y, kzg_aggregated_proof)