Replies: 5 comments
-
These are surely strange values. Maybe some questions first:
I remember that earlier infotainment versions in the car gave wrong consumption figures. Do you still have an old infotainment version in the car? I looked up my values and they are as expected. They go back till December 2022. And yes, these values like total_consumed are in Wh. |
Beta Was this translation helpful? Give feedback.
-
It's an IONIQ5 in the EU. I will check the infotainement software version next time I get to the car, but that's a good lead that you remember that earlier infotainment versions in the car gave wrong consumption figures. Maybe that's the problem here. The IONIQ5 now is one year old. Only got a software update last summer because of a recall campaign concerning a handbrake issue. But that update maybe didn't apply to the infotainement system. However it's strange that the onboard system shows other consumption values than it submits to the bluelink server. |
Beta Was this translation helpful? Give feedback.
-
You can install the newest 221223 version yourself with an USB stick or SSD of 64 GB or bigger. |
Beta Was this translation helpful? Give feedback.
-
I know. But I also need the HeadUnit update only feasible by the garage as far as I know. ;-) |
Beta Was this translation helpful? Give feedback.
-
The update site will update the Maps AND the infotainment version. The latter is the HeadUnit you refer to, I think. Only for firmware updates of sensors you need to go to the garage, |
Beta Was this translation helpful? Give feedback.
-
Hi there,
I get very odd dailystat values. Look here at the csv - I added a kWh/100km column at the end:
This isn't a problem with your scripts - I also get power consumption values like 70000Wh for a trip of 29km (that's more or less the whole battery content!) with other scripts that connect to bluelink.
And I defenetively didn't have to charge from 0 to 100% after that 29km trip on 16.1.2023. On board system displays a correct average consumption of 18-19 kWh/100km. Here are the statistics from the onboard system - telling something totally different as the bluelink data (the displayed 10.6 and 2.2 kWh/100km seem oddly but are correct because they were completely down a montain) 11.2. corresponds to bluelink API, but 12.+13.2. do not.
Do you have any experience with such odd values? Values like "total_consumed" defenetively are in Wh, isn't it?
Best regards
emale999
Beta Was this translation helpful? Give feedback.
All reactions