diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 3bec49c33bbb9b..7f3a0728ccf274 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -228,8 +228,6 @@ isdn/ - directory with info on the Linux ISDN support, and supported cards. kbuild/ - directory with info about the kernel build process. -kernel-doc-nano-HOWTO.txt - - outdated info about kernel-doc documentation. kdump/ - directory with mini HowTo on getting the crash dump code to work. doc-guide/ @@ -346,8 +344,6 @@ prctl/ - directory with info on the priveledge control subsystem preempt-locking.txt - info on locking under a preemptive kernel. -printk-formats.txt - - how to get printk format specifiers right process/ - how to work with the mainline kernel development process. pps/ diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index b98048b56ada9c..dc63e5bddf7836 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -2538,6 +2538,9 @@ This is useful when you use a panic=... timeout and need the box quickly up again. + These settings can be accessed at runtime via + the nmi_watchdog and hardlockup_panic sysctls. + netpoll.carrier_timeout= [NET] Specifies amount of time (in seconds) that netpoll should wait for a carrier. By default netpoll diff --git a/Documentation/admin-guide/mono.rst b/Documentation/admin-guide/mono.rst index cdddc099af646c..59e6d59f0ed9ef 100644 --- a/Documentation/admin-guide/mono.rst +++ b/Documentation/admin-guide/mono.rst @@ -9,14 +9,14 @@ This will allow you to execute Mono-based .NET binaries just like any other program after you have done the following: 1) You MUST FIRST install the Mono CLR support, either by downloading - a binary package, a source tarball or by installing from CVS. Binary + a binary package, a source tarball or by installing from Git. Binary packages for several distributions can be found at: - http://go-mono.com/download.html + http://www.mono-project.com/download/ Instructions for compiling Mono can be found at: - http://www.go-mono.com/compiling.html + http://www.mono-project.com/docs/compiling-mono/linux/ Once the Mono CLR support has been installed, just check that ``/usr/bin/mono`` (which could be located elsewhere, for example diff --git a/Documentation/conf.py b/Documentation/conf.py index 63857d33778ce2..62ac5a9f3a9f42 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -88,7 +88,6 @@ if makefile_version and makefile_patchlevel: version = release = makefile_version + '.' + makefile_patchlevel else: - sys.stderr.write('Warning: Could not extract kernel version\n') version = release = "unknown version" # The language for content autogenerated by Sphinx. Refer to documentation diff --git a/Documentation/errseq.rst b/Documentation/core-api/errseq.rst similarity index 92% rename from Documentation/errseq.rst rename to Documentation/core-api/errseq.rst index 4c29bd5afbc570..ff332e272405e7 100644 --- a/Documentation/errseq.rst +++ b/Documentation/core-api/errseq.rst @@ -1,5 +1,7 @@ +===================== The errseq_t datatype ===================== + An errseq_t is a way of recording errors in one place, and allowing any number of "subscribers" to tell whether it has changed since a previous point where it was sampled. @@ -21,12 +23,13 @@ a flag to tell whether the value has been sampled since a new value was recorded. That allows us to avoid bumping the counter if no one has sampled it since the last time an error was recorded. -Thus we end up with a value that looks something like this:: +Thus we end up with a value that looks something like this: - bit: 31..13 12 11..0 - +-----------------+----+----------------+ - | counter | SF | errno | - +-----------------+----+----------------+ ++--------------------------------------+----+------------------------+ +| 31..13 | 12 | 11..0 | ++--------------------------------------+----+------------------------+ +| counter | SF | errno | ++--------------------------------------+----+------------------------+ The general idea is for "watchers" to sample an errseq_t value and keep it as a running cursor. That value can later be used to tell whether @@ -42,6 +45,7 @@ has ever been an error set since it was first initialized. API usage ========= + Let me tell you a story about a worker drone. Now, he's a good worker overall, but the company is a little...management heavy. He has to report to 77 supervisors today, and tomorrow the "big boss" is coming in @@ -125,6 +129,7 @@ not usable by anyone else. Serializing errseq_t cursor updates =================================== + Note that the errseq_t API does not protect the errseq_t cursor during a check_and_advance_operation. Only the canonical error code is handled atomically. In a situation where more than one task might be using the @@ -147,3 +152,8 @@ errseq_check_and_advance after taking the lock. e.g.:: That avoids the spinlock in the common case where nothing has changed since the last time it was checked. + +Functions +========= + +.. kernel-doc:: lib/errseq.c diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index d5bbe035316d5b..1b1fd01990b592 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -14,6 +14,7 @@ Core utilities kernel-api assoc_array atomic_ops + refcount-vs-atomic cpu_hotplug local_ops workqueue @@ -21,6 +22,8 @@ Core utilities flexible-arrays librs genalloc + errseq + printk-formats Interfaces for kernel debugging =============================== diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index 2d9da6c40a4d36..e7fadf02c5112b 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -139,6 +139,21 @@ Division Functions .. kernel-doc:: lib/gcd.c :export: +Sorting +------- + +.. kernel-doc:: lib/sort.c + :export: + +.. kernel-doc:: lib/list_sort.c + :export: + +UUID/GUID +--------- + +.. kernel-doc:: lib/uuid.c + :export: + Memory Management in Linux ========================== diff --git a/Documentation/printk-formats.txt b/Documentation/core-api/printk-formats.rst similarity index 64% rename from Documentation/printk-formats.txt rename to Documentation/core-api/printk-formats.rst index aa0a776c817a7c..258b46435320a7 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/core-api/printk-formats.rst @@ -5,6 +5,7 @@ How to get printk format specifiers right :Author: Randy Dunlap :Author: Andrew Murray + Integer types ============= @@ -25,39 +26,45 @@ Integer types s64 %lld or %llx u64 %llu or %llx -If is dependent on a config option for its size (e.g., ``sector_t``, -``blkcnt_t``) or is architecture-dependent for its size (e.g., ``tcflag_t``), -use a format specifier of its largest possible type and explicitly cast to it. + +If is dependent on a config option for its size (e.g., sector_t, +blkcnt_t) or is architecture-dependent for its size (e.g., tcflag_t), use a +format specifier of its largest possible type and explicitly cast to it. Example:: printk("test: sector number/total blocks: %llu/%llu\n", (unsigned long long)sector, (unsigned long long)blockcount); -Reminder: ``sizeof()`` result is of type ``size_t``. +Reminder: sizeof() returns type size_t. -The kernel's printf does not support ``%n``. For obvious reasons, floating -point formats (``%e, %f, %g, %a``) are also not recognized. Use of any +The kernel's printf does not support %n. Floating point formats (%e, %f, +%g, %a) are also not recognized, for obvious reasons. Use of any unsupported specifier or length qualifier results in a WARN and early -return from vsnprintf. - -Raw pointer value SHOULD be printed with %p. The kernel supports -the following extended format specifiers for pointer types: +return from vsnprintf(). -Pointer Types +Pointer types ============= -Pointers printed without a specifier extension (i.e unadorned %p) are -hashed to give a unique identifier without leaking kernel addresses to user -space. On 64 bit machines the first 32 bits are zeroed. If you _really_ -want the address see %px below. +A raw pointer value may be printed with %p which will hash the address +before printing. The kernel also supports extended specifiers for printing +pointers of different types. + +Plain Pointers +-------------- :: %p abcdef12 or 00000000abcdef12 +Pointers printed without a specifier extension (i.e unadorned %p) are +hashed to prevent leaking information about the kernel memory layout. This +has the added benefit of providing a unique identifier. On 64-bit machines +the first 32 bits are zeroed. If you *really* want the address see %px +below. + Symbols/Function Pointers -========================= +------------------------- :: @@ -69,6 +76,7 @@ Symbols/Function Pointers %ps versatile_init %pB prev_fn_of_versatile_init+0x88/0x88 + The ``F`` and ``f`` specifiers are for printing function pointers, for example, f->func, &gettimeofday. They have the same result as ``S`` and ``s`` specifiers. But they do an extra conversion on @@ -77,14 +85,14 @@ are actually function descriptors. The ``S`` and ``s`` specifiers can be used for printing symbols from direct addresses, for example, __builtin_return_address(0), -(void *)regs->ip. They result in the symbol name with (``S``) or -without (``s``) offsets. If KALLSYMS are disabled then the symbol +(void *)regs->ip. They result in the symbol name with (S) or +without (s) offsets. If KALLSYMS are disabled then the symbol address is printed instead. The ``B`` specifier results in the symbol name with offsets and should be used when printing stack backtraces. The specifier takes into consideration the effect of compiler optimisations which may occur -when tail-call``s are used and marked with the noreturn GCC attribute. +when tail-calls are used and marked with the noreturn GCC attribute. Examples:: @@ -97,33 +105,32 @@ Examples:: printk(" %s%pB\n", (reliable ? "" : "? "), (void *)*stack); Kernel Pointers -=============== +--------------- :: %pK 01234567 or 0123456789abcdef For printing kernel pointers which should be hidden from unprivileged -users. The behaviour of ``%pK`` depends on the ``kptr_restrict sysctl`` - see +users. The behaviour of %pK depends on the kptr_restrict sysctl - see Documentation/sysctl/kernel.txt for more details. Unmodified Addresses -==================== +-------------------- :: %px 01234567 or 0123456789abcdef -For printing pointers when you _really_ want to print the address. Please +For printing pointers when you *really* want to print the address. Please consider whether or not you are leaking sensitive information about the -Kernel layout in memory before printing pointers with %px. %px is -functionally equivalent to %lx. %px is preferred to %lx because it is more -uniquely grep'able. If, in the future, we need to modify the way the Kernel -handles printing pointers it will be nice to be able to find the call -sites. +kernel memory layout before printing pointers with %px. %px is functionally +equivalent to %lx (or %lu). %px is preferred because it is more uniquely +grep'able. If in the future we need to modify the way the kernel handles +printing pointers we will be better equipped to find the call sites. Struct Resources -================ +---------------- :: @@ -133,32 +140,37 @@ Struct Resources [mem 0x0000000060000000-0x000000006fffffff pref] For printing struct resources. The ``R`` and ``r`` specifiers result in a -printed resource with (``R``) or without (``r``) a decoded flags member. +printed resource with (R) or without (r) a decoded flags member. + Passed by reference. -Physical addresses types ``phys_addr_t`` -======================================== +Physical address types phys_addr_t +---------------------------------- :: %pa[p] 0x01234567 or 0x0123456789abcdef -For printing a ``phys_addr_t`` type (and its derivatives, such as -``resource_size_t``) which can vary based on build options, regardless of -the width of the CPU data path. Passed by reference. +For printing a phys_addr_t type (and its derivatives, such as +resource_size_t) which can vary based on build options, regardless of the +width of the CPU data path. + +Passed by reference. -DMA addresses types ``dma_addr_t`` -================================== +DMA address types dma_addr_t +---------------------------- :: %pad 0x01234567 or 0x0123456789abcdef -For printing a ``dma_addr_t`` type which can vary based on build options, -regardless of the width of the CPU data path. Passed by reference. +For printing a dma_addr_t type which can vary based on build options, +regardless of the width of the CPU data path. + +Passed by reference. Raw buffer as an escaped string -=============================== +------------------------------- :: @@ -168,8 +180,8 @@ For printing raw buffer as an escaped string. For the following buffer:: 1b 62 20 5c 43 07 22 90 0d 5d -few examples show how the conversion would be done (the result string -without surrounding quotes):: +A few examples show how the conversion would be done (excluding surrounding +quotes):: %*pE "\eb \C\a"\220\r]" %*pEhp "\x1bb \C\x07"\x90\x0d]" @@ -179,23 +191,23 @@ The conversion rules are applied according to an optional combination of flags (see :c:func:`string_escape_mem` kernel documentation for the details): - - ``a`` - ESCAPE_ANY - - ``c`` - ESCAPE_SPECIAL - - ``h`` - ESCAPE_HEX - - ``n`` - ESCAPE_NULL - - ``o`` - ESCAPE_OCTAL - - ``p`` - ESCAPE_NP - - ``s`` - ESCAPE_SPACE + - a - ESCAPE_ANY + - c - ESCAPE_SPECIAL + - h - ESCAPE_HEX + - n - ESCAPE_NULL + - o - ESCAPE_OCTAL + - p - ESCAPE_NP + - s - ESCAPE_SPACE By default ESCAPE_ANY_NP is used. ESCAPE_ANY_NP is the sane choice for many cases, in particularly for printing SSIDs. -If field width is omitted the 1 byte only will be escaped. +If field width is omitted then 1 byte only will be escaped. Raw buffer as a hex string -========================== +-------------------------- :: @@ -204,12 +216,12 @@ Raw buffer as a hex string %*phD 00-01-02- ... -3f %*phN 000102 ... 3f -For printing a small buffers (up to 64 bytes long) as a hex string with -certain separator. For the larger buffers consider to use +For printing small buffers (up to 64 bytes long) as a hex string with a +certain separator. For larger buffers consider using :c:func:`print_hex_dump`. MAC/FDDI addresses -================== +------------------ :: @@ -220,11 +232,11 @@ MAC/FDDI addresses %pmR 050403020100 For printing 6-byte MAC/FDDI addresses in hex notation. The ``M`` and ``m`` -specifiers result in a printed address with (``M``) or without (``m``) byte -separators. The default byte separator is the colon (``:``). +specifiers result in a printed address with (M) or without (m) byte +separators. The default byte separator is the colon (:). Where FDDI addresses are concerned the ``F`` specifier can be used after -the ``M`` specifier to use dash (``-``) separators instead of the default +the ``M`` specifier to use dash (-) separators instead of the default separator. For Bluetooth addresses the ``R`` specifier shall be used after the ``M`` @@ -234,7 +246,7 @@ of Bluetooth addresses which are in the little endian order. Passed by reference. IPv4 addresses -============== +-------------- :: @@ -243,8 +255,8 @@ IPv4 addresses %p[Ii]4[hnbl] For printing IPv4 dot-separated decimal addresses. The ``I4`` and ``i4`` -specifiers result in a printed address with (``i4``) or without (``I4``) -leading zeros. +specifiers result in a printed address with (i4) or without (I4) leading +zeros. The additional ``h``, ``n``, ``b``, and ``l`` specifiers are used to specify host, network, big or little endian order addresses respectively. Where @@ -253,7 +265,7 @@ no specifier is provided the default network/big endian order is used. Passed by reference. IPv6 addresses -============== +-------------- :: @@ -262,7 +274,7 @@ IPv6 addresses %pI6c 1:2:3:4:5:6:7:8 For printing IPv6 network-order 16-bit hex addresses. The ``I6`` and ``i6`` -specifiers result in a printed address with (``I6``) or without (``i6``) +specifiers result in a printed address with (I6) or without (i6) colon-separators. Leading zeros are always used. The additional ``c`` specifier can be used with the ``I`` specifier to @@ -272,7 +284,7 @@ http://tools.ietf.org/html/rfc5952 Passed by reference. IPv4/IPv6 addresses (generic, with port, flowinfo, scope) -========================================================= +--------------------------------------------------------- :: @@ -282,8 +294,8 @@ IPv4/IPv6 addresses (generic, with port, flowinfo, scope) %pISpc 1.2.3.4:12345 or [1:2:3:4:5:6:7:8]:12345 %p[Ii]S[pfschnbl] -For printing an IP address without the need to distinguish whether it``s -of type AF_INET or AF_INET6, a pointer to a valid ``struct sockaddr``, +For printing an IP address without the need to distinguish whether it's of +type AF_INET or AF_INET6. A pointer to a valid struct sockaddr, specified through ``IS`` or ``iS``, can be passed to this format specifier. The additional ``p``, ``f``, and ``s`` specifiers are used to specify port @@ -309,7 +321,7 @@ Further examples:: %pISpfc 1.2.3.4:12345 or [1:2:3:4:5:6:7:8]:12345/123456789 UUID/GUID addresses -=================== +------------------- :: @@ -318,33 +330,33 @@ UUID/GUID addresses %pUl 03020100-0504-0706-0809-0a0b0c0e0e0f %pUL 03020100-0504-0706-0809-0A0B0C0E0E0F -For printing 16-byte UUID/GUIDs addresses. The additional 'l', 'L', -'b' and 'B' specifiers are used to specify a little endian order in -lower ('l') or upper case ('L') hex characters - and big endian order -in lower ('b') or upper case ('B') hex characters. +For printing 16-byte UUID/GUIDs addresses. The additional ``l``, ``L``, +``b`` and ``B`` specifiers are used to specify a little endian order in +lower (l) or upper case (L) hex notation - and big endian order in lower (b) +or upper case (B) hex notation. Where no additional specifiers are used the default big endian -order with lower case hex characters will be printed. +order with lower case hex notation will be printed. Passed by reference. dentry names -============ +------------ :: %pd{,2,3,4} %pD{,2,3,4} -For printing dentry name; if we race with :c:func:`d_move`, the name might be -a mix of old and new ones, but it won't oops. ``%pd`` dentry is a safer -equivalent of ``%s`` ``dentry->d_name.name`` we used to use, ``%pd`` prints -``n`` last components. ``%pD`` does the same thing for struct file. +For printing dentry name; if we race with :c:func:`d_move`, the name might +be a mix of old and new ones, but it won't oops. %pd dentry is a safer +equivalent of %s dentry->d_name.name we used to use, %pd prints ``n`` +last components. %pD does the same thing for struct file. Passed by reference. block_device names -================== +------------------ :: @@ -353,7 +365,7 @@ block_device names For printing name of block_device pointers. struct va_format -================ +---------------- :: @@ -375,31 +387,27 @@ correctness of the format string and va_list arguments. Passed by reference. kobjects -======== +-------- :: - %pO + %pOF[fnpPcCF] - Base specifier for kobject based structs. Must be followed with - character for specific type of kobject as listed below: - Device tree nodes: +For printing kobject based structs (device nodes). Default behaviour is +equivalent to %pOFf. - %pOF[fnpPcCF] + - f - device node full_name + - n - device node name + - p - device node phandle + - P - device node path spec (name + @unit) + - F - device node flags + - c - major compatible string + - C - full compatible string - For printing device tree nodes. The optional arguments are: - f device node full_name - n device node name - p device node phandle - P device node path spec (name + @unit) - F device node flags - c major compatible string - C full compatible string - Without any arguments prints full_name (same as %pOFf) - The separator when using multiple arguments is ':' +The separator when using multiple arguments is ':' - Examples: +Examples:: %pOF /foo/bar@0 - Node full name %pOFf /foo/bar@0 - Same as above @@ -412,11 +420,10 @@ kobjects P - Populated B - Populated bus - Passed by reference. - +Passed by reference. struct clk -========== +---------- :: @@ -424,14 +431,14 @@ struct clk %pCn pll1 %pCr 1560000000 -For printing struct clk structures. ``%pC`` and ``%pCn`` print the name +For printing struct clk structures. %pC and %pCn print the name (Common Clock Framework) or address (legacy clock framework) of the -structure; ``%pCr`` prints the current clock rate. +structure; %pCr prints the current clock rate. Passed by reference. bitmap and its derivatives such as cpumask and nodemask -======================================================= +------------------------------------------------------- :: @@ -439,13 +446,13 @@ bitmap and its derivatives such as cpumask and nodemask %*pbl 0,3-6,8-10 For printing bitmap and its derivatives such as cpumask and nodemask, -``%*pb`` output the bitmap with field width as the number of bits and ``%*pbl`` +%*pb outputs the bitmap with field width as the number of bits and %*pbl output the bitmap as range list with field width as the number of bits. Passed by reference. Flags bitfields such as page flags, gfp_flags -============================================= +--------------------------------------------- :: @@ -459,14 +466,14 @@ character. Currently supported are [p]age flags, [v]ma_flags (both expect ``unsigned long *``) and [g]fp_flags (expects ``gfp_t *``). The flag names and print order depends on the particular type. -Note that this format should not be used directly in :c:func:`TP_printk()` part -of a tracepoint. Instead, use the ``show_*_flags()`` functions from -. +Note that this format should not be used directly in the +:c:func:`TP_printk()` part of a tracepoint. Instead, use the show_*_flags() +functions from . Passed by reference. Network device features -======================= +----------------------- :: @@ -476,8 +483,10 @@ For printing netdev_features_t. Passed by reference. -If you add other ``%p`` extensions, please extend lib/test_printf.c with -one or more test cases, if at all feasible. +Thanks +====== +If you add other %p extensions, please extend with +one or more test cases, if at all feasible. Thank you for your cooperation and attention. diff --git a/Documentation/core-api/refcount-vs-atomic.rst b/Documentation/core-api/refcount-vs-atomic.rst new file mode 100644 index 00000000000000..83351c258cdb9a --- /dev/null +++ b/Documentation/core-api/refcount-vs-atomic.rst @@ -0,0 +1,150 @@ +=================================== +refcount_t API compared to atomic_t +=================================== + +.. contents:: :local: + +Introduction +============ + +The goal of refcount_t API is to provide a minimal API for implementing +an object's reference counters. While a generic architecture-independent +implementation from lib/refcount.c uses atomic operations underneath, +there are a number of differences between some of the ``refcount_*()`` and +``atomic_*()`` functions with regards to the memory ordering guarantees. +This document outlines the differences and provides respective examples +in order to help maintainers validate their code against the change in +these memory ordering guarantees. + +The terms used through this document try to follow the formal LKMM defined in +github.com/aparri/memory-model/blob/master/Documentation/explanation.txt + +memory-barriers.txt and atomic_t.txt provide more background to the +memory ordering in general and for atomic operations specifically. + +Relevant types of memory ordering +================================= + +.. note:: The following section only covers some of the memory + ordering types that are relevant for the atomics and reference + counters and used through this document. For a much broader picture + please consult memory-barriers.txt document. + +In the absence of any memory ordering guarantees (i.e. fully unordered) +atomics & refcounters only provide atomicity and +program order (po) relation (on the same CPU). It guarantees that +each ``atomic_*()`` and ``refcount_*()`` operation is atomic and instructions +are executed in program order on a single CPU. +This is implemented using :c:func:`READ_ONCE`/:c:func:`WRITE_ONCE` and +compare-and-swap primitives. + +A strong (full) memory ordering guarantees that all prior loads and +stores (all po-earlier instructions) on the same CPU are completed +before any po-later instruction is executed on the same CPU. +It also guarantees that all po-earlier stores on the same CPU +and all propagated stores from other CPUs must propagate to all +other CPUs before any po-later instruction is executed on the original +CPU (A-cumulative property). This is implemented using :c:func:`smp_mb`. + +A RELEASE memory ordering guarantees that all prior loads and +stores (all po-earlier instructions) on the same CPU are completed +before the operation. It also guarantees that all po-earlier +stores on the same CPU and all propagated stores from other CPUs +must propagate to all other CPUs before the release operation +(A-cumulative property). This is implemented using +:c:func:`smp_store_release`. + +A control dependency (on success) for refcounters guarantees that +if a reference for an object was successfully obtained (reference +counter increment or addition happened, function returned true), +then further stores are ordered against this operation. +Control dependency on stores are not implemented using any explicit +barriers, but rely on CPU not to speculate on stores. This is only +a single CPU relation and provides no guarantees for other CPUs. + + +Comparison of functions +======================= + +case 1) - non-"Read/Modify/Write" (RMW) ops +------------------------------------------- + +Function changes: + + * :c:func:`atomic_set` --> :c:func:`refcount_set` + * :c:func:`atomic_read` --> :c:func:`refcount_read` + +Memory ordering guarantee changes: + + * none (both fully unordered) + + +case 2) - increment-based ops that return no value +-------------------------------------------------- + +Function changes: + + * :c:func:`atomic_inc` --> :c:func:`refcount_inc` + * :c:func:`atomic_add` --> :c:func:`refcount_add` + +Memory ordering guarantee changes: + + * none (both fully unordered) + +case 3) - decrement-based RMW ops that return no value +------------------------------------------------------ + +Function changes: + + * :c:func:`atomic_dec` --> :c:func:`refcount_dec` + +Memory ordering guarantee changes: + + * fully unordered --> RELEASE ordering + + +case 4) - increment-based RMW ops that return a value +----------------------------------------------------- + +Function changes: + + * :c:func:`atomic_inc_not_zero` --> :c:func:`refcount_inc_not_zero` + * no atomic counterpart --> :c:func:`refcount_add_not_zero` + +Memory ordering guarantees changes: + + * fully ordered --> control dependency on success for stores + +.. note:: We really assume here that necessary ordering is provided as a + result of obtaining pointer to the object! + + +case 5) - decrement-based RMW ops that return a value +----------------------------------------------------- + +Function changes: + + * :c:func:`atomic_dec_and_test` --> :c:func:`refcount_dec_and_test` + * :c:func:`atomic_sub_and_test` --> :c:func:`refcount_sub_and_test` + * no atomic counterpart --> :c:func:`refcount_dec_if_one` + * ``atomic_add_unless(&var, -1, 1)`` --> ``refcount_dec_not_one(&var)`` + +Memory ordering guarantees changes: + + * fully ordered --> RELEASE ordering + control dependency + +.. note:: :c:func:`atomic_add_unless` only provides full order on success. + + +case 6) - lock-based RMW +------------------------ + +Function changes: + + * :c:func:`atomic_dec_and_lock` --> :c:func:`refcount_dec_and_lock` + * :c:func:`atomic_dec_and_mutex_lock` --> :c:func:`refcount_dec_and_mutex_lock` + +Memory ordering guarantees changes: + + * fully ordered --> RELEASE ordering + control dependency + hold + :c:func:`spin_lock` on success diff --git a/Documentation/doc-guide/kernel-doc.rst b/Documentation/doc-guide/kernel-doc.rst index 0268335414ce3b..722d4525f7cfdf 100644 --- a/Documentation/doc-guide/kernel-doc.rst +++ b/Documentation/doc-guide/kernel-doc.rst @@ -112,16 +112,17 @@ Example kernel-doc function comment:: /** * foobar() - Brief description of foobar. - * @arg: Description of argument of foobar. + * @argument1: Description of parameter argument1 of foobar. + * @argument2: Description of parameter argument2 of foobar. * * Longer description of foobar. * * Return: Description of return value of foobar. */ - int foobar(int arg) + int foobar(int argument1, char *argument2) The format is similar for documentation for structures, enums, paragraphs, -etc. See the sections below for details. +etc. See the sections below for specific details of each type. The kernel-doc structure is extracted from the comments, and proper `Sphinx C Domain`_ function and type descriptions with anchors are generated for them. The @@ -130,6 +131,226 @@ cross-references. See below for details. .. _Sphinx C Domain: http://www.sphinx-doc.org/en/stable/domains.html + +Parameters and member arguments +------------------------------- + +The kernel-doc function comments describe each parameter to the function and +function typedefs or each member of struct/union, in order, with the +``@argument:`` descriptions. For each non-private member argument, one +``@argument`` definition is needed. + +The ``@argument:`` descriptions begin on the very next line following +the opening brief function description line, with no intervening blank +comment lines. + +The ``@argument:`` descriptions may span multiple lines. + +.. note:: + + If the ``@argument`` description has multiple lines, the continuation + of the description should be starting exactly at the same column as + the previous line, e. g.:: + + * @argument: some long description + * that continues on next lines + + or:: + + * @argument: + * some long description + * that continues on next lines + +If a function or typedef parameter argument is ``...`` (e. g. a variable +number of arguments), its description should be listed in kernel-doc +notation as:: + + * @...: description + +Private members +~~~~~~~~~~~~~~~ + +Inside a struct or union description, you can use the ``private:`` and +``public:`` comment tags. Structure fields that are inside a ``private:`` +area are not listed in the generated output documentation. + +The ``private:`` and ``public:`` tags must begin immediately following a +``/*`` comment marker. They may optionally include comments between the +``:`` and the ending ``*/`` marker. + +Example:: + + /** + * struct my_struct - short description + * @a: first member + * @b: second member + * @d: fourth member + * + * Longer description + */ + struct my_struct { + int a; + int b; + /* private: internal use only */ + int c; + /* public: the next one is public */ + int d; + }; + +Function documentation +---------------------- + +The general format of a function and function-like macro kernel-doc comment is:: + + /** + * function_name() - Brief description of function. + * @arg1: Describe the first argument. + * @arg2: Describe the second argument. + * One can provide multiple line descriptions + * for arguments. + * + * A longer description, with more discussion of the function function_name() + * that might be useful to those using or modifying it. Begins with an + * empty comment line, and may include additional embedded empty + * comment lines. + * + * The longer description may have multiple paragraphs. + * + * Return: Describe the return value of foobar. + * + * The return value description can also have multiple paragraphs, and should + * be placed at the end of the comment block. + */ + +The brief description following the function name may span multiple lines, and +ends with an argument description, a blank comment line, or the end of the +comment block. + +Return values +~~~~~~~~~~~~~ + +The return value, if any, should be described in a dedicated section +named ``Return``. + +.. note:: + + #) The multi-line descriptive text you provide does *not* recognize + line breaks, so if you try to format some text nicely, as in:: + + * Return: + * 0 - OK + * -EINVAL - invalid argument + * -ENOMEM - out of memory + + this will all run together and produce:: + + Return: 0 - OK -EINVAL - invalid argument -ENOMEM - out of memory + + So, in order to produce the desired line breaks, you need to use a + ReST list, e. g.:: + + * Return: + * * 0 - OK to runtime suspend the device + * * -EBUSY - Device should not be runtime suspended + + #) If the descriptive text you provide has lines that begin with + some phrase followed by a colon, each of those phrases will be taken + as a new section heading, with probably won't produce the desired + effect. + +Structure, union, and enumeration documentation +----------------------------------------------- + +The general format of a struct, union, and enum kernel-doc comment is:: + + /** + * struct struct_name - Brief description. + * @argument: Description of member member_name. + * + * Description of the structure. + */ + +On the above, ``struct`` is used to mean structs. You can also use ``union`` +and ``enum`` to describe unions and enums. ``argument`` is used +to mean struct and union member names as well as enumerations in an enum. + +The brief description following the structure name may span multiple lines, and +ends with a member description, a blank comment line, or the end of the +comment block. + +The kernel-doc data structure comments describe each member of the structure, +in order, with the member descriptions. + +Nested structs/unions +~~~~~~~~~~~~~~~~~~~~~ + +It is possible to document nested structs unions, like:: + + /** + * struct nested_foobar - a struct with nested unions and structs + * @arg1: - first argument of anonymous union/anonymous struct + * @arg2: - second argument of anonymous union/anonymous struct + * @arg3: - third argument of anonymous union/anonymous struct + * @arg4: - fourth argument of anonymous union/anonymous struct + * @bar.st1.arg1 - first argument of struct st1 on union bar + * @bar.st1.arg2 - second argument of struct st1 on union bar + * @bar.st2.arg1 - first argument of struct st2 on union bar + * @bar.st2.arg2 - second argument of struct st2 on union bar + struct nested_foobar { + /* Anonymous union/struct*/ + union { + struct { + int arg1; + int arg2; + } + struct { + void *arg3; + int arg4; + } + } + union { + struct { + int arg1; + int arg2; + } st1; + struct { + void *arg1; + int arg2; + } st2; + } bar; + }; + +.. note:: + + #) When documenting nested structs or unions, if the struct/union ``foo`` + is named, the argument ``bar`` inside it should be documented as + ``@foo.bar:`` + #) When the nested struct/union is anonymous, the argument ``bar`` on it + should be documented as ``@bar:`` + +Typedef documentation +--------------------- + +The general format of a typedef kernel-doc comment is:: + + /** + * typedef type_name - Brief description. + * + * Description of the type. + */ + +Typedefs with function prototypes can also be documented:: + + /** + * typedef type_name - Brief description. + * @arg1: description of arg1 + * @arg2: description of arg2 + * + * Description of the type. + */ + typedef void (*type_name)(struct v4l2_ctrl *arg1, void *arg2); + + Highlights and cross-references ------------------------------- @@ -201,70 +422,7 @@ cross-references. For further details, please refer to the `Sphinx C Domain`_ documentation. -Function documentation ----------------------- - -The general format of a function and function-like macro kernel-doc comment is:: - - /** - * function_name() - Brief description of function. - * @arg1: Describe the first argument. - * @arg2: Describe the second argument. - * One can provide multiple line descriptions - * for arguments. - * - * A longer description, with more discussion of the function function_name() - * that might be useful to those using or modifying it. Begins with an - * empty comment line, and may include additional embedded empty - * comment lines. - * - * The longer description may have multiple paragraphs. - * - * Return: Describe the return value of foobar. - * - * The return value description can also have multiple paragraphs, and should - * be placed at the end of the comment block. - */ - -The brief description following the function name may span multiple lines, and -ends with an ``@argument:`` description, a blank comment line, or the end of the -comment block. - -The kernel-doc function comments describe each parameter to the function, in -order, with the ``@argument:`` descriptions. The ``@argument:`` descriptions -must begin on the very next line following the opening brief function -description line, with no intervening blank comment lines. The ``@argument:`` -descriptions may span multiple lines. The continuation lines may contain -indentation. If a function parameter is ``...`` (varargs), it should be listed -in kernel-doc notation as: ``@...:``. - -The return value, if any, should be described in a dedicated section at the end -of the comment starting with "Return:". - -Structure, union, and enumeration documentation ------------------------------------------------ - -The general format of a struct, union, and enum kernel-doc comment is:: - - /** - * struct struct_name - Brief description. - * @member_name: Description of member member_name. - * - * Description of the structure. - */ - -Below, "struct" is used to mean structs, unions and enums, and "member" is used -to mean struct and union members as well as enumerations in an enum. - -The brief description following the structure name may span multiple lines, and -ends with a ``@member:`` description, a blank comment line, or the end of the -comment block. -The kernel-doc data structure comments describe each member of the structure, in -order, with the ``@member:`` descriptions. The ``@member:`` descriptions must -begin on the very next line following the opening brief function description -line, with no intervening blank comment lines. The ``@member:`` descriptions may -span multiple lines. The continuation lines may contain indentation. In-line member documentation comments ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -294,42 +452,6 @@ on a line of their own, like all other kernel-doc comments:: int foobar; } -Private members -~~~~~~~~~~~~~~~ - -Inside a struct description, you can use the "private:" and "public:" comment -tags. Structure fields that are inside a "private:" area are not listed in the -generated output documentation. The "private:" and "public:" tags must begin -immediately following a ``/*`` comment marker. They may optionally include -comments between the ``:`` and the ending ``*/`` marker. - -Example:: - - /** - * struct my_struct - short description - * @a: first member - * @b: second member - * - * Longer description - */ - struct my_struct { - int a; - int b; - /* private: internal use only */ - int c; - }; - - -Typedef documentation ---------------------- - -The general format of a typedef kernel-doc comment is:: - - /** - * typedef type_name - Brief description. - * - * Description of the type. - */ Overview documentation comments ------------------------------- @@ -376,3 +498,37 @@ file. Data structures visible in kernel include files should also be documented using kernel-doc formatted comments. + +How to use kernel-doc to generate man pages +------------------------------------------- + +If you just want to use kernel-doc to generate man pages you can do this +from the Kernel git tree:: + + $ scripts/kernel-doc -man $(git grep -l '/\*\*' |grep -v Documentation/) | ./split-man.pl /tmp/man + +Using the small ``split-man.pl`` script below:: + + + #!/usr/bin/perl + + if ($#ARGV < 0) { + die "where do I put the results?\n"; + } + + mkdir $ARGV[0],0777; + $state = 0; + while () { + if (/^\.TH \"[^\"]*\" 9 \"([^\"]*)\"/) { + if ($state == 1) { close OUT } + $state = 1; + $fn = "$ARGV[0]/$1.9"; + print STDERR "Creating $fn\n"; + open OUT, ">$fn" or die "can't open $fn: $!\n"; + print OUT $_; + } elsif ($state != 0) { + print OUT $_; + } + } + + close OUT; diff --git a/Documentation/driver-api/basics.rst b/Documentation/driver-api/basics.rst index 73fa7d42bbbaed..826e85d50a16b9 100644 --- a/Documentation/driver-api/basics.rst +++ b/Documentation/driver-api/basics.rst @@ -13,12 +13,6 @@ Driver device table .. kernel-doc:: include/linux/mod_devicetable.h :internal: -Atomic and pointer manipulation -------------------------------- - -.. kernel-doc:: arch/x86/include/asm/atomic.h - :internal: - Delaying, scheduling, and timer routines ---------------------------------------- @@ -85,6 +79,21 @@ Internal Functions .. kernel-doc:: kernel/kthread.c :export: +Reference counting +------------------ + +.. kernel-doc:: include/linux/refcount.h + :internal: + +.. kernel-doc:: lib/refcount.c + :export: + +Atomics +------- + +.. kernel-doc:: arch/x86/include/asm/atomic.h + :internal: + Kernel objects manipulation --------------------------- diff --git a/Documentation/driver-api/usb/usb3-debug-port.rst b/Documentation/driver-api/usb/usb3-debug-port.rst index feb1a36a65b74f..b9fd131f4723d1 100644 --- a/Documentation/driver-api/usb/usb3-debug-port.rst +++ b/Documentation/driver-api/usb/usb3-debug-port.rst @@ -98,3 +98,55 @@ you to check the sanity of the setup. cat /dev/ttyUSB0 done ===== end of bash scripts =============== + +Serial TTY +========== + +The DbC support has been added to the xHCI driver. You can get a +debug device provided by the DbC at runtime. + +In order to use this, you need to make sure your kernel has been +configured to support USB_XHCI_DBGCAP. A sysfs attribute under +the xHCI device node is used to enable or disable DbC. By default, +DbC is disabled:: + + root@target:/sys/bus/pci/devices/0000:00:14.0# cat dbc + disabled + +Enable DbC with the following command:: + + root@target:/sys/bus/pci/devices/0000:00:14.0# echo enable > dbc + +You can check the DbC state at anytime:: + + root@target:/sys/bus/pci/devices/0000:00:14.0# cat dbc + enabled + +Connect the debug target to the debug host with a USB 3.0 super- +speed A-to-A debugging cable. You can see /dev/ttyDBC0 created +on the debug target. You will see below kernel message lines:: + + root@target: tail -f /var/log/kern.log + [ 182.730103] xhci_hcd 0000:00:14.0: DbC connected + [ 191.169420] xhci_hcd 0000:00:14.0: DbC configured + [ 191.169597] xhci_hcd 0000:00:14.0: DbC now attached to /dev/ttyDBC0 + +Accordingly, the DbC state has been brought up to:: + + root@target:/sys/bus/pci/devices/0000:00:14.0# cat dbc + configured + +On the debug host, you will see the debug device has been enumerated. +You will see below kernel message lines:: + + root@host: tail -f /var/log/kern.log + [ 79.454780] usb 2-2.1: new SuperSpeed USB device number 3 using xhci_hcd + [ 79.475003] usb 2-2.1: LPM exit latency is zeroed, disabling LPM. + [ 79.475389] usb 2-2.1: New USB device found, idVendor=1d6b, idProduct=0010 + [ 79.475390] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 + [ 79.475391] usb 2-2.1: Product: Linux USB Debug Target + [ 79.475392] usb 2-2.1: Manufacturer: Linux Foundation + [ 79.475393] usb 2-2.1: SerialNumber: 0001 + +The debug device works now. You can use any communication or debugging +program to talk between the host and the target. diff --git a/Documentation/driver-api/usb/writing_usb_driver.rst b/Documentation/driver-api/usb/writing_usb_driver.rst index 69f077dcdb785c..4fe1c06b6a1349 100644 --- a/Documentation/driver-api/usb/writing_usb_driver.rst +++ b/Documentation/driver-api/usb/writing_usb_driver.rst @@ -321,6 +321,6 @@ linux-usb-devel Mailing List Archives: http://marc.theaimsgroup.com/?l=linux-usb-devel Programming Guide for Linux USB Device Drivers: -http://usb.cs.tum.edu/usbdoc +http://lmu.web.psi.ch/docu/manuals/software_manuals/linux_sl/usb_linux_programming_guide.pdf USB Home Page: http://www.usb.org diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt index f4a32463ca486c..de1dc35fe50095 100644 --- a/Documentation/fault-injection/fault-injection.txt +++ b/Documentation/fault-injection/fault-injection.txt @@ -1,7 +1,7 @@ Fault injection capabilities infrastructure =========================================== -See also drivers/md/faulty.c and "every_nth" module option for scsi_debug. +See also drivers/md/md-faulty.c and "every_nth" module option for scsi_debug. Available fault injection capabilities diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt index 55755395d3dc50..81c0becab22505 100644 --- a/Documentation/filesystems/ext2.txt +++ b/Documentation/filesystems/ext2.txt @@ -49,12 +49,10 @@ sb=n Use alternate superblock at this location. user_xattr Enable "user." POSIX Extended Attributes (requires CONFIG_EXT2_FS_XATTR). - See also http://acl.bestbits.at nouser_xattr Don't support "user." extended attributes. acl Enable POSIX Access Control Lists support (requires CONFIG_EXT2_FS_POSIX_ACL). - See also http://acl.bestbits.at noacl Don't support POSIX ACLs. nobh Do not attach buffer_heads to file pagecache. diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 75236c0c2ac231..8cd63e16f171c5 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -202,15 +202,14 @@ inode_readahead_blks=n This tuning parameter controls the maximum the buffer cache. The default value is 32 blocks. nouser_xattr Disables Extended User Attributes. See the - attr(5) manual page and http://acl.bestbits.at/ - for more information about extended attributes. + attr(5) manual page for more information about + extended attributes. noacl This option disables POSIX Access Control List support. If ACL support is enabled in the kernel configuration (CONFIG_EXT4_FS_POSIX_ACL), ACL is enabled by default on mount. See the acl(5) manual - page and http://acl.bestbits.at/ for more information - about acl. + page for more information about acl. bsddf (*) Make 'df' act like BSD. minixdf Make 'df' act like Minix. diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt index cf51360e3a9fb7..91031298beb13d 100644 --- a/Documentation/filesystems/vfat.txt +++ b/Documentation/filesystems/vfat.txt @@ -344,4 +344,4 @@ the following: characters in the final slot are set to Unicode 0xFFFF. Finally, note that the extended name is stored in Unicode. Each Unicode -character takes two bytes. +character takes either two or four bytes, UTF-16LE encoded. diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface index 5ff19447ac4420..d04e6e4964ee7f 100644 --- a/Documentation/i2c/dev-interface +++ b/Documentation/i2c/dev-interface @@ -17,13 +17,16 @@ i2c-10, ...). All 256 minor device numbers are reserved for i2c. C example ========= -So let's say you want to access an i2c adapter from a C program. The -first thing to do is "#include ". Please note that -there are two files named "i2c-dev.h" out there, one is distributed -with the Linux kernel and is meant to be included from kernel -driver code, the other one is distributed with i2c-tools and is -meant to be included from user-space programs. You obviously want -the second one here. +So let's say you want to access an i2c adapter from a C program. +First, you need to include these two headers: + + #include + #include + +(Please note that there are two files named "i2c-dev.h" out there. One is +distributed with the Linux kernel and the other one is included in the +source tree of i2c-tools. They used to be different in content but since 2012 +they're identical. You should use "linux/i2c-dev.h"). Now, you have to decide which adapter you want to access. You should inspect /sys/class/i2c-dev/ or run "i2cdetect -l" to decide this. diff --git a/Documentation/index.rst b/Documentation/index.rst index cb7f1ba5b3b1d5..ef5080cbf009d6 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -13,6 +13,18 @@ documents into a coherent whole. Please note that improvements to the documentation are welcome; join the linux-doc list at vger.kernel.org if you want to help out. +Licensing documentation +----------------------- + +The following describes the license of the Linux kernel source code +(GPLv2), how to properly mark the license of individual files in the source +tree, as well as links to the full license text. + +.. toctree:: + :maxdepth: 2 + + process/license-rules.rst + User-oriented documentation --------------------------- @@ -52,6 +64,7 @@ merged much easier. dev-tools/index doc-guide/index kernel-hacking/index + maintainer/index Kernel API documentation ------------------------ diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index c4a293a03c337f..f5b9493f04ada9 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -77,6 +77,27 @@ applicable everywhere (see syntax). Optionally, dependencies only for this default value can be added with "if". + The default value deliberately defaults to 'n' in order to avoid bloating the + build. With few exceptions, new config options should not change this. The + intent is for "make oldconfig" to add as little as possible to the config from + release to release. + + Note: + Things that merit "default y/m" include: + + a) A new Kconfig option for something that used to always be built + should be "default y". + + b) A new gatekeeping Kconfig option that hides/shows other Kconfig + options (but does not generate any code of its own), should be + "default y" so people will see those other options. + + c) Sub-driver behavior or similar options for a driver that is + "default n". This allows you to provide sane defaults. + + d) Hardware or infrastructure that everybody expects, such as CONFIG_NET + or CONFIG_BLOCK. These are rare exceptions. + - type definition + default value: "def_bool"/"def_tristate" ["if" ] This is a shorthand notation for a type definition plus a value. diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt deleted file mode 100644 index c23e2c5ab80da3..00000000000000 --- a/Documentation/kernel-doc-nano-HOWTO.txt +++ /dev/null @@ -1,322 +0,0 @@ -NOTE: this document is outdated and will eventually be removed. See -Documentation/doc-guide/ for current information. - -kernel-doc nano-HOWTO -===================== - -How to format kernel-doc comments ---------------------------------- - -In order to provide embedded, 'C' friendly, easy to maintain, -but consistent and extractable documentation of the functions and -data structures in the Linux kernel, the Linux kernel has adopted -a consistent style for documenting functions and their parameters, -and structures and their members. - -The format for this documentation is called the kernel-doc format. -It is documented in this Documentation/kernel-doc-nano-HOWTO.txt file. - -This style embeds the documentation within the source files, using -a few simple conventions. The scripts/kernel-doc perl script, the -Documentation/sphinx/kerneldoc.py Sphinx extension and other tools understand -these conventions, and are used to extract this embedded documentation -into various documents. - -In order to provide good documentation of kernel functions and data -structures, please use the following conventions to format your -kernel-doc comments in Linux kernel source. - -We definitely need kernel-doc formatted documentation for functions -that are exported to loadable modules using EXPORT_SYMBOL. - -We also look to provide kernel-doc formatted documentation for -functions externally visible to other kernel files (not marked -"static"). - -We also recommend providing kernel-doc formatted documentation -for private (file "static") routines, for consistency of kernel -source code layout. But this is lower priority and at the -discretion of the MAINTAINER of that kernel source file. - -Data structures visible in kernel include files should also be -documented using kernel-doc formatted comments. - -The opening comment mark "/**" is reserved for kernel-doc comments. -Only comments so marked will be considered by the kernel-doc scripts, -and any comment so marked must be in kernel-doc format. Do not use -"/**" to be begin a comment block unless the comment block contains -kernel-doc formatted comments. The closing comment marker for -kernel-doc comments can be either "*/" or "**/", but "*/" is -preferred in the Linux kernel tree. - -Kernel-doc comments should be placed just before the function -or data structure being described. - -Example kernel-doc function comment: - -/** - * foobar() - short function description of foobar - * @arg1: Describe the first argument to foobar. - * @arg2: Describe the second argument to foobar. - * One can provide multiple line descriptions - * for arguments. - * - * A longer description, with more discussion of the function foobar() - * that might be useful to those using or modifying it. Begins with - * empty comment line, and may include additional embedded empty - * comment lines. - * - * The longer description can have multiple paragraphs. - * - * Return: Describe the return value of foobar. - */ - -The short description following the subject can span multiple lines -and ends with an @argument description, an empty line or the end of -the comment block. - -The @argument descriptions must begin on the very next line following -this opening short function description line, with no intervening -empty comment lines. - -If a function parameter is "..." (varargs), it should be listed in -kernel-doc notation as: - * @...: description - -The return value, if any, should be described in a dedicated section -named "Return". - -Example kernel-doc data structure comment. - -/** - * struct blah - the basic blah structure - * @mem1: describe the first member of struct blah - * @mem2: describe the second member of struct blah, - * perhaps with more lines and words. - * - * Longer description of this structure. - */ - -The kernel-doc function comments describe each parameter to the -function, in order, with the @name lines. - -The kernel-doc data structure comments describe each structure member -in the data structure, with the @name lines. - -The longer description formatting is "reflowed", losing your line -breaks. So presenting carefully formatted lists within these -descriptions won't work so well; derived documentation will lose -the formatting. - -See the section below "How to add extractable documentation to your -source files" for more details and notes on how to format kernel-doc -comments. - -Components of the kernel-doc system ------------------------------------ - -Many places in the source tree have extractable documentation in the -form of block comments above functions. The components of this system -are: - -- scripts/kernel-doc - - This is a perl script that hunts for the block comments and can mark - them up directly into DocBook, ReST, man, text, and HTML. (No, not - texinfo.) - -- scripts/docproc.c - - This is a program for converting SGML template files into SGML - files. When a file is referenced it is searched for symbols - exported (EXPORT_SYMBOL), to be able to distinguish between internal - and external functions. - It invokes kernel-doc, giving it the list of functions that - are to be documented. - Additionally it is used to scan the SGML template files to locate - all the files referenced herein. This is used to generate dependency - information as used by make. - -- Makefile - - The targets 'xmldocs', 'latexdocs', 'pdfdocs', 'epubdocs'and 'htmldocs' - are used to build XML DocBook files, LaTeX files, PDF files, - ePub files and html files in Documentation/. - -How to extract the documentation --------------------------------- - -If you just want to read the ready-made books on the various -subsystems, just type 'make epubdocs', or 'make pdfdocs', or 'make htmldocs', -depending on your preference. If you would rather read a different format, -you can type 'make xmldocs' and then use DocBook tools to convert -Documentation/output/*.xml to a format of your choice (for example, -'db2html ...' if 'make htmldocs' was not defined). - -If you want to see man pages instead, you can do this: - -$ cd linux -$ scripts/kernel-doc -man $(find -name '*.c') | split-man.pl /tmp/man -$ scripts/kernel-doc -man $(find -name '*.h') | split-man.pl /tmp/man - -Here is split-man.pl: - ---> -#!/usr/bin/perl - -if ($#ARGV < 0) { - die "where do I put the results?\n"; -} - -mkdir $ARGV[0],0777; -$state = 0; -while () { - if (/^\.TH \"[^\"]*\" 9 \"([^\"]*)\"/) { - if ($state == 1) { close OUT } - $state = 1; - $fn = "$ARGV[0]/$1.9"; - print STDERR "Creating $fn\n"; - open OUT, ">$fn" or die "can't open $fn: $!\n"; - print OUT $_; - } elsif ($state != 0) { - print OUT $_; - } -} - -close OUT; -<-- - -If you just want to view the documentation for one function in one -file, you can do this: - -$ scripts/kernel-doc -man -function fn file | nroff -man | less - -or this: - -$ scripts/kernel-doc -text -function fn file - - -How to add extractable documentation to your source files ---------------------------------------------------------- - -The format of the block comment is like this: - -/** - * function_name(:)? (- short description)? -(* @parameterx(space)*: (description of parameter x)?)* -(* a blank line)? - * (Description:)? (Description of function)? - * (section header: (section description)? )* -(*)?*/ - -All "description" text can span multiple lines, although the -function_name & its short description are traditionally on a single line. -Description text may also contain blank lines (i.e., lines that contain -only a "*"). - -"section header:" names must be unique per function (or struct, -union, typedef, enum). - -Use the section header "Return" for sections describing the return value -of a function. - -Avoid putting a spurious blank line after the function name, or else the -description will be repeated! - -All descriptive text is further processed, scanning for the following special -patterns, which are highlighted appropriately. - -'funcname()' - function -'$ENVVAR' - environment variable -'&struct_name' - name of a structure (up to two words including 'struct') -'@parameter' - name of a parameter -'%CONST' - name of a constant. - -NOTE 1: The multi-line descriptive text you provide does *not* recognize -line breaks, so if you try to format some text nicely, as in: - - Return: - 0 - cool - 1 - invalid arg - 2 - out of memory - -this will all run together and produce: - - Return: 0 - cool 1 - invalid arg 2 - out of memory - -NOTE 2: If the descriptive text you provide has lines that begin with -some phrase followed by a colon, each of those phrases will be taken as -a new section heading, which means you should similarly try to avoid text -like: - - Return: - 0: cool - 1: invalid arg - 2: out of memory - -every line of which would start a new section. Again, probably not -what you were after. - -Take a look around the source tree for examples. - - -kernel-doc for structs, unions, enums, and typedefs ---------------------------------------------------- - -Beside functions you can also write documentation for structs, unions, -enums and typedefs. Instead of the function name you must write the name -of the declaration; the struct/union/enum/typedef must always precede -the name. Nesting of declarations is not supported. -Use the argument mechanism to document members or constants. - -Inside a struct description, you can use the "private:" and "public:" -comment tags. Structure fields that are inside a "private:" area -are not listed in the generated output documentation. The "private:" -and "public:" tags must begin immediately following a "/*" comment -marker. They may optionally include comments between the ":" and the -ending "*/" marker. - -Example: - -/** - * struct my_struct - short description - * @a: first member - * @b: second member - * - * Longer description - */ -struct my_struct { - int a; - int b; -/* private: internal use only */ - int c; -}; - - -Including documentation blocks in source files ----------------------------------------------- - -To facilitate having source code and comments close together, you can -include kernel-doc documentation blocks that are free-form comments -instead of being kernel-doc for functions, structures, unions, -enums, or typedefs. This could be used for something like a -theory of operation for a driver or library code, for example. - -This is done by using a DOC: section keyword with a section title. E.g.: - -/** - * DOC: Theory of Operation - * - * The whizbang foobar is a dilly of a gizmo. It can do whatever you - * want it to do, at any time. It reads your mind. Here's how it works. - * - * foo bar splat - * - * The only drawback to this gizmo is that is can sometimes damage - * hardware, software, or its subject(s). - */ - -DOC: sections are used in ReST files. - -Tim. -*/ diff --git a/Documentation/kernel-hacking/hacking.rst b/Documentation/kernel-hacking/hacking.rst index daf3883b2694dd..9999c846829317 100644 --- a/Documentation/kernel-hacking/hacking.rst +++ b/Documentation/kernel-hacking/hacking.rst @@ -523,7 +523,7 @@ this expression is true, or ``-ERESTARTSYS`` if a signal is received. The Waking Up Queued Tasks ---------------------- -Call :c:func:`wake_up()` (``include/linux/wait.h``);, which will wake +Call :c:func:`wake_up()` (``include/linux/wait.h``), which will wake up every process in the queue. The exception is if one has ``TASK_EXCLUSIVE`` set, in which case the remainder of the queue will not be woken. There are other variants of this basic function available @@ -690,8 +690,8 @@ not provide the necessary runtime environment and the include files are not tested for it. It is still possible, but not recommended. If you really want to do this, forget about exceptions at least. -NUMif ------ +#if +--- It is generally considered cleaner to use macros in header files (or at the top of .c files) to abstract away functions rather than using \`#if' diff --git a/Documentation/maintainer/conf.py b/Documentation/maintainer/conf.py new file mode 100644 index 00000000000000..81e9eb7a78847f --- /dev/null +++ b/Documentation/maintainer/conf.py @@ -0,0 +1,10 @@ +# -*- coding: utf-8; mode: python -*- + +project = 'Linux Kernel Development Documentation' + +tags.add("subproject") + +latex_documents = [ + ('index', 'maintainer.tex', 'Linux Kernel Development Documentation', + 'The kernel development community', 'manual'), +] diff --git a/Documentation/maintainer/configure-git.rst b/Documentation/maintainer/configure-git.rst new file mode 100644 index 00000000000000..78bbbb0d2c8499 --- /dev/null +++ b/Documentation/maintainer/configure-git.rst @@ -0,0 +1,34 @@ +.. _configuregit: + +Configure Git +============= + +This chapter describes maintainer level git configuration. + +Tagged branches used in :ref:`Documentation/maintainer/pull-requests.rst +` should be signed with the developers public GPG key. Signed +tags can be created by passing the ``-u`` flag to ``git tag``. However, +since you would *usually* use the same key for the same project, you can +set it once with +:: + + git config user.signingkey "keyname" + +Alternatively, edit your ``.git/config`` or ``~/.gitconfig`` file by hand: +:: + + [user] + name = Jane Developer + email = jd@domain.org + signingkey = jd@domain.org + +You may need to tell ``git`` to use ``gpg2`` +:: + + [gpg] + program = /path/to/gpg2 + +You may also like to tell ``gpg`` which ``tty`` to use (add to your shell rc file) +:: + + export GPG_TTY=$(tty) diff --git a/Documentation/maintainer/index.rst b/Documentation/maintainer/index.rst new file mode 100644 index 00000000000000..2a14916930cbfa --- /dev/null +++ b/Documentation/maintainer/index.rst @@ -0,0 +1,14 @@ +========================== +Kernel Maintainer Handbook +========================== + +This document is the humble beginning of a manual for kernel maintainers. +There is a lot yet to go here! Please feel free to propose (and write) +additions to this manual. + +.. toctree:: + :maxdepth: 2 + + configure-git + pull-requests + diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst new file mode 100644 index 00000000000000..a19db3458b56b7 --- /dev/null +++ b/Documentation/maintainer/pull-requests.rst @@ -0,0 +1,178 @@ +.. _pullrequests: + +Creating Pull Requests +====================== + +This chapter describes how maintainers can create and submit pull requests +to other maintainers. This is useful for transferring changes from one +maintainers tree to another maintainers tree. + +This document was written by Tobin C. Harding (who at that time, was not an +experienced maintainer) primarily from comments made by Greg Kroah-Hartman +and Linus Torvalds on LKML. Suggestions and fixes by Jonathan Corbet and +Mauro Carvalho Chehab. Misrepresentation was unintentional but inevitable, +please direct abuse to Tobin C. Harding . + +Original email thread:: + + http://lkml.kernel.org/r/20171114110500.GA21175@kroah.com + + +Create Branch +------------- + +To start with you will need to have all the changes you wish to include in +the pull request on a separate branch. Typically you will base this branch +off of a branch in the developers tree whom you intend to send the pull +request to. + +In order to create the pull request you must first tag the branch that you +have just created. It is recommended that you choose a meaningful tag name, +in a way that you and others can understand, even after some time. A good +practice is to include in the name an indicator of the sybsystem of origin +and the target kernel version. + +Greg offers the following. A pull request with miscellaneous stuff for +drivers/char, to be applied at the Kernel version 4.15-rc1 could be named +as ``char-misc-4.15-rc1``. If such tag would be produced from a branch +named ``char-misc-next``, you would be using the following command:: + + git tag -s char-misc-4.15-rc1 char-misc-next + +that will create a signed tag called ``char-misc-4.15-rc1`` based on the +last commit in the ``char-misc-next`` branch, and sign it with your gpg key +(see :ref:`Documentation/maintainer/configure_git.rst `). + +Linus will only accept pull requests based on a signed tag. Other +maintainers may differ. + +When you run the above command ``git`` will drop you into an editor and ask +you to describe the tag. In this case, you are describing a pull request, +so outline what is contained here, why it should be merged, and what, if +any, testing has been done. All of this information will end up in the tag +itself, and then in the merge commit that the maintainer makes if/when they +merge the pull request. So write it up well, as it will be in the kernel +tree for forever. + +As said by Linus:: + + Anyway, at least to me, the important part is the *message*. I want + to understand what I'm pulling, and why I should pull it. I also + want to use that message as the message for the merge, so it should + not just make sense to me, but make sense as a historical record + too. + + Note that if there is something odd about the pull request, that + should very much be in the explanation. If you're touching files + that you don't maintain, explain _why_. I will see it in the + diffstat anyway, and if you didn't mention it, I'll just be extra + suspicious. And when you send me new stuff after the merge window + (or even bug-fixes, but ones that look scary), explain not just + what they do and why they do it, but explain the _timing_. What + happened that this didn't go through the merge window.. + + I will take both what you write in the email pull request _and_ in + the signed tag, so depending on your workflow, you can either + describe your work in the signed tag (which will also automatically + make it into the pull request email), or you can make the signed + tag just a placeholder with nothing interesting in it, and describe + the work later when you actually send me the pull request. + + And yes, I will edit the message. Partly because I tend to do just + trivial formatting (the whole indentation and quoting etc), but + partly because part of the message may make sense for me at pull + time (describing the conflicts and your personal issues for sending + it right now), but may not make sense in the context of a merge + commit message, so I will try to make it all make sense. I will + also fix any speeling mistaeks and bad grammar I notice, + particularly for non-native speakers (but also for native ones + ;^). But I may miss some, or even add some. + + Linus + +Greg gives, as an example pull request:: + + Char/Misc patches for 4.15-rc1 + + Here is the big char/misc patch set for the 4.15-rc1 merge window. + Contained in here is the normal set of new functions added to all + of these crazy drivers, as well as the following brand new + subsystems: + - time_travel_controller: Finally a set of drivers for the + latest time travel bus architecture that provides i/o to + the CPU before it asked for it, allowing uninterrupted + processing + - relativity_shifters: due to the affect that the + time_travel_controllers have on the overall system, there + was a need for a new set of relativity shifter drivers to + accommodate the newly formed black holes that would + threaten to suck CPUs into them. This subsystem handles + this in a way to successfully neutralize the problems. + There is a Kconfig option to force these to be enabled + when needed, so problems should not occur. + + All of these patches have been successfully tested in the latest + linux-next releases, and the original problems that it found have + all been resolved (apologies to anyone living near Canberra for the + lack of the Kconfig options in the earlier versions of the + linux-next tree creations.) + + Signed-off-by: Your-name-here + + +The tag message format is just like a git commit id. One line at the top +for a "summary subject" and be sure to sign-off at the bottom. + +Now that you have a local signed tag, you need to push it up to where it +can be retrieved:: + + git push origin char-misc-4.15-rc1 + + +Create Pull Request +------------------- + +The last thing to do is create the pull request message. ``git`` handily +will do this for you with the ``git request-pull`` command, but it needs a +bit of help determining what you want to pull, and on what to base the pull +against (to show the correct changes to be pulled and the diffstat). The +following command(s) will generate a pull request:: + + git request-pull master git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git/ char-misc-4.15-rc1 + +Quoting Greg:: + + This is asking git to compare the difference from the + 'char-misc-4.15-rc1' tag location, to the head of the 'master' + branch (which in my case points to the last location in Linus's + tree that I diverged from, usually a -rc release) and to use the + git:// protocol to pull from. If you wish to use https://, that + can be used here instead as well (but note that some people behind + firewalls will have problems with https git pulls). + + If the char-misc-4.15-rc1 tag is not present in the repo that I am + asking to be pulled from, git will complain saying it is not there, + a handy way to remember to actually push it to a public location. + + The output of 'git request-pull' will contain the location of the + git tree and specific tag to pull from, and the full text + description of that tag (which is why you need to provide good + information in that tag). It will also create a diffstat of the + pull request, and a shortlog of the individual commits that the + pull request will provide. + +Linus responded that he tends to prefer the ``git://`` protocol. Other +maintainers may have different preferences. Also, note that if you are +creating pull requests without a signed tag then ``https://`` may be a +better choice. Please see the original thread for the full discussion. + + +Submit Pull Request +------------------- + +A pull request is submitted in the same way as an ordinary patch. Send as +inline email to the maintainer and CC LKML and any sub-system specific +lists if required. Pull requests to Linus typically have a subject line +something like:: + + [GIT PULL] changes for v4.15-rc1 diff --git a/Documentation/process/kernel-enforcement-statement.rst b/Documentation/process/kernel-enforcement-statement.rst index bfa6a78103d8ec..6816c12d695691 100644 --- a/Documentation/process/kernel-enforcement-statement.rst +++ b/Documentation/process/kernel-enforcement-statement.rst @@ -68,6 +68,7 @@ we might work for today, have in the past, or will in the future. - Paul Burton - Javier Martinez Canillas - Rob Clark + - Kees Cook (Google) - Jonathan Corbet - Dennis Dalessandro - Vivien Didelot (Savoir-faire Linux) @@ -137,6 +138,7 @@ we might work for today, have in the past, or will in the future. - Anna Schumaker - Jes Sorensen - K.Y. Srinivasan + - David Sterba (SUSE) - Heiko Stuebner - Jiri Kosina (SUSE) - Willy Tarreau @@ -144,6 +146,7 @@ we might work for today, have in the past, or will in the future. - Linus Torvalds - Thierry Reding - Rik van Riel + - Luis R. Rodriguez - Geert Uytterhoeven (Glider bvba) - Eduardo Valentin (Amazon.com) - Daniel Vetter diff --git a/Documentation/process/license-rules.rst b/Documentation/process/license-rules.rst new file mode 100644 index 00000000000000..408f77dc61573c --- /dev/null +++ b/Documentation/process/license-rules.rst @@ -0,0 +1,370 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Linux kernel licensing rules +============================ + +The Linux Kernel is provided under the terms of the GNU General Public +License version 2 only (GPL-2.0), as published by the Free Software +Foundation, and provided in the COPYING file. This documentation file is +not meant to replace the COPYING file, but provides a description of how +each source file should be annotated to make the licensing it is governed +under clear and unambiguous. + +The license in the COPYING file applies to the kernel source as a whole, +though individual source files can have a different license which is +required to be compatible with the GPL-2.0:: + + GPL-1.0+ : GNU General Public License v1.0 or later + GPL-2.0+ : GNU General Public License v2.0 or later + LGPL-2.0 : GNU Library General Public License v2 only + LGPL-2.0+ : GNU Library General Public License v2 or later + LGPL-2.1 : GNU Lesser General Public License v2.1 only + LGPL-2.1+ : GNU Lesser General Public License v2.1 or later + +Aside from that, individual files can be provided under a dual license, +e.g. one of the compatible GPL variants and alternatively under a +permissive license like BSD, MIT etc. + +The User-space API (UAPI) header files, which describe the interface of +user-space programs to the kernel are a special case. According to the +note in the kernel COPYING file, the syscall interface is a clear boundary, +which does not extend the GPL requirements to any software which uses it to +communicate with the kernel. Because the UAPI headers must be includable +into any source files which create an executable running on the Linux +kernel, the exception must be documented by a special license expression. + +The common way of expressing the license of a source file is to add the +matching boilerplate text into the top comment of the file. Due to +formatting, typos etc. these "boilerplates" are hard to validate for +tools which are used in the context of license compliance. + +An alternative to boilerplate text is the use of Software Package Data +Exchange (SPDX) license identifiers in each source file. SPDX license +identifiers are machine parsable and precise shorthands for the license +under which the content of the file is contributed. SPDX license +identifiers are managed by the SPDX Workgroup at the Linux Foundation and +have been agreed on by partners throughout the industry, tool vendors, and +legal teams. For further information see https://spdx.org/ + +The Linux kernel requires the precise SPDX identifier in all source files. +The valid identifiers used in the kernel are explained in the section +`License identifiers`_ and have been retrieved from the official SPDX +license list at https://spdx.org/licenses/ along with the license texts. + +License identifier syntax +------------------------- + +1. Placement: + + The SPDX license identifier in kernel files shall be added at the first + possible line in a file which can contain a comment. For the majority + or files this is the first line, except for scripts which require the + '#!PATH_TO_INTERPRETER' in the first line. For those scripts the SPDX + identifier goes into the second line. + +| + +2. Style: + + The SPDX license identifier is added in form of a comment. The comment + style depends on the file type:: + + C source: // SPDX-License-Identifier: + C header: /* SPDX-License-Identifier: */ + ASM: /* SPDX-License-Identifier: */ + scripts: # SPDX-License-Identifier: + .rst: .. SPDX-License-Identifier: + .dts{i}: // SPDX-License-Identifier: + + If a specific tool cannot handle the standard comment style, then the + appropriate comment mechanism which the tool accepts shall be used. This + is the reason for having the "/\* \*/" style comment in C header + files. There was build breakage observed with generated .lds files where + 'ld' failed to parse the C++ comment. This has been fixed by now, but + there are still older assembler tools which cannot handle C++ style + comments. + +| + +3. Syntax: + + A is either an SPDX short form license + identifier found on the SPDX License List, or the combination of two + SPDX short form license identifiers separated by "WITH" when a license + exception applies. When multiple licenses apply, an expression consists + of keywords "AND", "OR" separating sub-expressions and surrounded by + "(", ")" . + + License identifiers for licenses like [L]GPL with the 'or later' option + are constructed by using a "+" for indicating the 'or later' option.:: + + // SPDX-License-Identifier: GPL-2.0+ + // SPDX-License-Identifier: LGPL-2.1+ + + WITH should be used when there is a modifier to a license needed. + For example, the linux kernel UAPI files use the expression:: + + // SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note + // SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note + + Other examples using WITH exceptions found in the kernel are:: + + // SPDX-License-Identifier: GPL-2.0 WITH mif-exception + // SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0 + + Exceptions can only be used with particular License identifiers. The + valid License identifiers are listed in the tags of the exception text + file. For details see the point `Exceptions`_ in the chapter `License + identifiers`_. + + OR should be used if the file is dual licensed and only one license is + to be selected. For example, some dtsi files are available under dual + licenses:: + + // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause + + Examples from the kernel for license expressions in dual licensed files:: + + // SPDX-License-Identifier: GPL-2.0 OR MIT + // SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause + // SPDX-License-Identifier: GPL-2.0 OR Apache-2.0 + // SPDX-License-Identifier: GPL-2.0 OR MPL-1.1 + // SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT + // SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause OR OpenSSL + + AND should be used if the file has multiple licenses whose terms all + apply to use the file. For example, if code is inherited from another + project and permission has been given to put it in the kernel, but the + original license terms need to remain in effect:: + + // SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) AND MIT + + Another other example where both sets of license terms need to be + adhered to is:: + + // SPDX-License-Identifier: GPL-1.0+ AND LGPL-2.1+ + +License identifiers +------------------- + +The licenses currently used, as well as the licenses for code added to the +kernel, can be broken down into: + +1. _`Preferred licenses`: + + Whenever possible these licenses should be used as they are known to be + fully compatible and widely used. These licenses are available from the + directory:: + + LICENSES/preferred/ + + in the kernel source tree. + + The files in this directory contain the full license text and + `Metatags`_. The file names are identical to the SPDX license + identifier which shall be used for the license in source files. + + Examples:: + + LICENSES/preferred/GPL-2.0 + + Contains the GPL version 2 license text and the required metatags:: + + LICENSES/preferred/MIT + + Contains the MIT license text and the required metatags + + _`Metatags`: + + The following meta tags must be available in a license file: + + - Valid-License-Identifier: + + One or more lines which declare which License Identifiers are valid + inside the project to reference this particular license text. Usually + this is a single valid identifier, but e.g. for licenses with the 'or + later' options two identifiers are valid. + + - SPDX-URL: + + The URL of the SPDX page which contains additional information related + to the license. + + - Usage-Guidance: + + Freeform text for usage advice. The text must include correct examples + for the SPDX license identifiers as they should be put into source + files according to the `License identifier syntax`_ guidelines. + + - License-Text: + + All text after this tag is treated as the original license text + + File format examples:: + + Valid-License-Identifier: GPL-2.0 + Valid-License-Identifier: GPL-2.0+ + SPDX-URL: https://spdx.org/licenses/GPL-2.0.html + Usage-Guide: + To use this license in source code, put one of the following SPDX + tag/value pairs into a comment according to the placement + guidelines in the licensing rules documentation. + For 'GNU General Public License (GPL) version 2 only' use: + SPDX-License-Identifier: GPL-2.0 + For 'GNU General Public License (GPL) version 2 or any later version' use: + SPDX-License-Identifier: GPL-2.0+ + License-Text: + Full license text + + :: + + SPDX-License-Identifier: MIT + SPDX-URL: https://spdx.org/licenses/MIT.html + Usage-Guide: + To use this license in source code, put the following SPDX + tag/value pair into a comment according to the placement + guidelines in the licensing rules documentation. + SPDX-License-Identifier: MIT + License-Text: + Full license text + +| + +2. Not recommended licenses: + + These licenses should only be used for existing code or for importing + code from a different project. These licenses are available from the + directory:: + + LICENSES/other/ + + in the kernel source tree. + + The files in this directory contain the full license text and + `Metatags`_. The file names are identical to the SPDX license + identifier which shall be used for the license in source files. + + Examples:: + + LICENSES/other/ISC + + Contains the Internet Systems Consortium license text and the required + metatags:: + + LICENSES/other/ZLib + + Contains the ZLIB license text and the required metatags. + + Metatags: + + The metatag requirements for 'other' licenses are identical to the + requirements of the `Preferred licenses`_. + + File format example:: + + Valid-License-Identifier: ISC + SPDX-URL: https://spdx.org/licenses/ISC.html + Usage-Guide: + Usage of this license in the kernel for new code is discouraged + and it should solely be used for importing code from an already + existing project. + To use this license in source code, put the following SPDX + tag/value pair into a comment according to the placement + guidelines in the licensing rules documentation. + SPDX-License-Identifier: ISC + License-Text: + Full license text + +| + +3. _`Exceptions`: + + Some licenses can be amended with exceptions which grant certain rights + which the original license does not. These exceptions are available + from the directory:: + + LICENSES/exceptions/ + + in the kernel source tree. The files in this directory contain the full + exception text and the required `Exception Metatags`_. + + Examples:: + + LICENSES/exceptions/Linux-syscall-note + + Contains the Linux syscall exception as documented in the COPYING + file of the Linux kernel, which is used for UAPI header files. + e.g. /\* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note \*/:: + + LICENSES/exceptions/GCC-exception-2.0 + + Contains the GCC 'linking exception' which allows to link any binary + independent of its license against the compiled version of a file marked + with this exception. This is required for creating runnable executables + from source code which is not compatible with the GPL. + + _`Exception Metatags`: + + The following meta tags must be available in an exception file: + + - SPDX-Exception-Identifier: + + One exception identifier which can be used with SPDX license + identifiers. + + - SPDX-URL: + + The URL of the SPDX page which contains additional information related + to the exception. + + - SPDX-Licenses: + + A comma separated list of SPDX license identifiers for which the + exception can be used. + + - Usage-Guidance: + + Freeform text for usage advice. The text must be followed by correct + examples for the SPDX license identifiers as they should be put into + source files according to the `License identifier syntax`_ guidelines. + + - Exception-Text: + + All text after this tag is treated as the original exception text + + File format examples:: + + SPDX-Exception-Identifier: Linux-syscall-note + SPDX-URL: https://spdx.org/licenses/Linux-syscall-note.html + SPDX-Licenses: GPL-2.0, GPL-2.0+, GPL-1.0+, LGPL-2.0, LGPL-2.0+, LGPL-2.1, LGPL-2.1+ + Usage-Guidance: + This exception is used together with one of the above SPDX-Licenses + to mark user-space API (uapi) header files so they can be included + into non GPL compliant user-space application code. + To use this exception add it with the keyword WITH to one of the + identifiers in the SPDX-Licenses tag: + SPDX-License-Identifier: WITH Linux-syscall-note + Exception-Text: + Full exception text + + :: + + SPDX-Exception-Identifier: GCC-exception-2.0 + SPDX-URL: https://spdx.org/licenses/GCC-exception-2.0.html + SPDX-Licenses: GPL-2.0, GPL-2.0+ + Usage-Guidance: + The "GCC Runtime Library exception 2.0" is used together with one + of the above SPDX-Licenses for code imported from the GCC runtime + library. + To use this exception add it with the keyword WITH to one of the + identifiers in the SPDX-Licenses tag: + SPDX-License-Identifier: WITH GCC-exception-2.0 + Exception-Text: + Full exception text + + +All SPDX license identifiers and exceptions must have a corresponding file +in the LICENSE subdirectories. This is required to allow tool +verification (e.g. checkpatch.pl) and to have the licenses ready to read +and extract right from the source, which is recommended by various FOSS +organizations, e.g. the `FSFE REUSE initiative `_. diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst index a0d9d34bfb6d24..367353c54949dc 100644 --- a/Documentation/process/submit-checklist.rst +++ b/Documentation/process/submit-checklist.rst @@ -37,7 +37,9 @@ and elsewhere regarding submitting Linux kernel patches. You should be able to justify all violations that remain in your patch. -6) Any new or modified ``CONFIG`` options don't muck up the config menu. +6) Any new or modified ``CONFIG`` options do not muck up the config menu and + default to off unless they meet the exception criteria documented in + ``Documentation/kbuild/kconfig-language.txt`` Menu attributes: default value. 7) All new ``Kconfig`` options have help text. diff --git a/Documentation/security/credentials.rst b/Documentation/security/credentials.rst index 66a2e24939d808..5bb7125faeee24 100644 --- a/Documentation/security/credentials.rst +++ b/Documentation/security/credentials.rst @@ -451,6 +451,13 @@ checks and hooks done. Both the current and the proposed sets of credentials are available for this purpose as current_cred() will return the current set still at this point. +When replacing the group list, the new list must be sorted before it +is added to the credential, as a binary search is used to test for +membership. In practice, this means :c:func:`groups_sort` should be +called before :c:func:`set_groups` or :c:func:`set_current_groups`. +:c:func:`groups_sort)` must not be called on a ``struct group_list`` which +is shared as it may permute elements as part of the sorting process +even if the array is already sorted. When the credential set is ready, it should be committed to the current process by calling:: diff --git a/Documentation/security/self-protection.rst b/Documentation/security/self-protection.rst index 60c8bd8b77bf2f..0f53826c78b9f6 100644 --- a/Documentation/security/self-protection.rst +++ b/Documentation/security/self-protection.rst @@ -270,6 +270,21 @@ attacks, it is important to defend against exposure of both kernel memory addresses and kernel memory contents (since they may contain kernel addresses or other sensitive things like canary values). +Kernel addresses +---------------- + +Printing kernel addresses to userspace leaks sensitive information about +the kernel memory layout. Care should be exercised when using any printk +specifier that prints the raw address, currently %px, %p[ad], (and %p[sSb] +in certain circumstances [*]). Any file written to using one of these +specifiers should be readable only by privileged processes. + +Kernels 4.14 and older printed the raw address using %p. As of 4.15-rc1 +addresses printed with the specifier %p are hashed before printing. + +[*] If KALLSYMS is enabled and symbol lookup fails, the raw address is +printed. If KALLSYMS is not enabled the raw address is printed. + Unique identifiers ------------------ diff --git a/Documentation/sphinx/kfigure.py b/Documentation/sphinx/kfigure.py index cef4ad19624c5a..b97228d2cc0eef 100644 --- a/Documentation/sphinx/kfigure.py +++ b/Documentation/sphinx/kfigure.py @@ -81,7 +81,7 @@ # ------------- def which(cmd): - """Searches the ``cmd`` in the ``PATH`` enviroment. + """Searches the ``cmd`` in the ``PATH`` environment. This *which* searches the PATH for executable ``cmd`` . First match is returned, if nothing is found, ``None` is returned. @@ -419,7 +419,7 @@ def visit_kernel_render(self, node): tmp_ext = RENDER_MARKUP_EXT.get(srclang, None) if tmp_ext is None: - app.warn('kernel-render: "%s" unknow / include raw.' % (srclang)) + app.warn('kernel-render: "%s" unknown / include raw.' % (srclang)) return if not dot_cmd and tmp_ext == '.dot': @@ -482,7 +482,7 @@ def build_node(self): srclang = self.arguments[0].strip() if srclang not in RENDER_MARKUP_EXT.keys(): return [self.state_machine.reporter.warning( - 'Unknow source language "%s", use one of: %s.' % ( + 'Unknown source language "%s", use one of: %s.' % ( srclang, ",".join(RENDER_MARKUP_EXT.keys())), line=self.lineno)] diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 694968c7523cc2..412314eebda665 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -34,6 +34,7 @@ show up in /proc/sys/kernel: - hostname - hotplug - hardlockup_all_cpu_backtrace +- hardlockup_panic - hung_task_panic - hung_task_check_count - hung_task_timeout_secs @@ -313,6 +314,19 @@ will be initiated. 1: on detection capture more debug information. ============================================================== +hardlockup_panic: + +This parameter can be used to control whether the kernel panics +when a hard lockup is detected. + + 0 - don't panic on hard lockup + 1 - panic on hard lockup + +See Documentation/lockup-watchdogs.txt for more information. This can +also be set using the nmi_watchdog kernel parameter. + +============================================================== + hotplug: Path for the hotplug policy agent. @@ -377,7 +391,8 @@ kptr_restrict: This toggle indicates whether restrictions are placed on exposing kernel addresses via /proc and other interfaces. -When kptr_restrict is set to (0), the default, there are no restrictions. +When kptr_restrict is set to 0 (the default) the address is hashed before +printing. (This is the equivalent to %p.) When kptr_restrict is set to (1), kernel pointers printed using the %pK format specifier will be replaced with 0's unless the user has CAP_SYSLOG diff --git a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst index 8494a801d3415f..3aed560a12ee97 100644 --- a/Documentation/trace/ftrace-uses.rst +++ b/Documentation/trace/ftrace-uses.rst @@ -42,9 +42,9 @@ as well as what protections the callback will perform and not require ftrace to handle. There is only one field that is needed to be set when registering -an ftrace_ops with ftrace:: +an ftrace_ops with ftrace: -.. code-block: c +.. code-block:: c struct ftrace_ops ops = { .func = my_callback_func, @@ -81,12 +81,12 @@ may take some time to finish. The callback function ===================== -The prototype of the callback function is as follows (as of v4.14):: +The prototype of the callback function is as follows (as of v4.14): -.. code-block: c +.. code-block:: c - void callback_func(unsigned long ip, unsigned long parent_ip, - struct ftrace_ops *op, struct pt_regs *regs); + void callback_func(unsigned long ip, unsigned long parent_ip, + struct ftrace_ops *op, struct pt_regs *regs); @ip This is the instruction pointer of the function that is being traced. @@ -176,10 +176,10 @@ Filtering which functions to trace If a callback is only to be called from specific functions, a filter must be set up. The filters are added by name, or ip if it is known. -.. code-block: c +.. code-block:: c - int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf, - int len, int reset); + int ftrace_set_filter(struct ftrace_ops *ops, unsigned char *buf, + int len, int reset); @ops The ops to set the filter with @@ -202,9 +202,9 @@ See Filter Commands in :file:`Documentation/trace/ftrace.txt`. To just trace the schedule function:: -.. code-block: c +.. code-block:: c - ret = ftrace_set_filter(&ops, "schedule", strlen("schedule"), 0); + ret = ftrace_set_filter(&ops, "schedule", strlen("schedule"), 0); To add more functions, call the ftrace_set_filter() more than once with the @reset parameter set to zero. To remove the current filter set and replace it @@ -212,17 +212,17 @@ with new functions defined by @buf, have @reset be non-zero. To remove all the filtered functions and trace all functions:: -.. code-block: c +.. code-block:: c - ret = ftrace_set_filter(&ops, NULL, 0, 1); + ret = ftrace_set_filter(&ops, NULL, 0, 1); Sometimes more than one function has the same name. To trace just a specific function in this case, ftrace_set_filter_ip() can be used. -.. code-block: c +.. code-block:: c - ret = ftrace_set_filter_ip(&ops, ip, 0, 0); + ret = ftrace_set_filter_ip(&ops, ip, 0, 0); Although the ip must be the address where the call to fentry or mcount is located in the function. This function is used by perf and kprobes that @@ -237,10 +237,10 @@ be called by any function. An empty "notrace" list means to allow all functions defined by the filter to be traced. -.. code-block: c +.. code-block:: c - int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf, - int len, int reset); + int ftrace_set_notrace(struct ftrace_ops *ops, unsigned char *buf, + int len, int reset); This takes the same parameters as ftrace_set_filter() but will add the functions it finds to not be traced. This is a separate list from the @@ -251,7 +251,7 @@ that match @buf to it. Clearing the "notrace" list is the same as clearing the filter list -.. code-block: c +.. code-block:: c ret = ftrace_set_notrace(&ops, NULL, 0, 1); @@ -264,29 +264,29 @@ If a filter is in place, and the @reset is non-zero, and @buf contains a matching glob to functions, the switch will happen during the time of the ftrace_set_filter() call. At no time will all functions call the callback. -.. code-block: c +.. code-block:: c - ftrace_set_filter(&ops, "schedule", strlen("schedule"), 1); + ftrace_set_filter(&ops, "schedule", strlen("schedule"), 1); - register_ftrace_function(&ops); + register_ftrace_function(&ops); - msleep(10); + msleep(10); - ftrace_set_filter(&ops, "try_to_wake_up", strlen("try_to_wake_up"), 1); + ftrace_set_filter(&ops, "try_to_wake_up", strlen("try_to_wake_up"), 1); is not the same as: -.. code-block: c +.. code-block:: c - ftrace_set_filter(&ops, "schedule", strlen("schedule"), 1); + ftrace_set_filter(&ops, "schedule", strlen("schedule"), 1); - register_ftrace_function(&ops); + register_ftrace_function(&ops); - msleep(10); + msleep(10); - ftrace_set_filter(&ops, NULL, 0, 1); + ftrace_set_filter(&ops, NULL, 0, 1); - ftrace_set_filter(&ops, "try_to_wake_up", strlen("try_to_wake_up"), 0); + ftrace_set_filter(&ops, "try_to_wake_up", strlen("try_to_wake_up"), 0); As the latter will have a short time where all functions will call the callback, between the time of the reset, and the time of the diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt index edf7cdfddc88a1..d1eedc01b00a64 100644 --- a/Documentation/usb/chipidea.txt +++ b/Documentation/usb/chipidea.txt @@ -23,13 +23,13 @@ cat /sys/kernel/debug/ci_hdrc.0/registers 2) Connect 2 boards with usb cable with one end is micro A plug, the other end is micro B plug. - The A-device(with micro A plug inserted) should enumrate B-device. + The A-device(with micro A plug inserted) should enumerate B-device. 3) Role switch On B-device: echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req - B-device should take host role and enumrate A-device. + B-device should take host role and enumerate A-device. 4) A-device switch back to host. On B-device: @@ -40,13 +40,13 @@ cat /sys/kernel/debug/ci_hdrc.0/registers side by answering the polling from B-Host, this can be done on A-device: echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req - A-device should switch back to host and enumrate B-device. + A-device should switch back to host and enumerate B-device. 5) Remove B-device(unplug micro B plug) and insert again in 10 seconds, - A-device should enumrate B-device again. + A-device should enumerate B-device again. 6) Remove B-device(unplug micro B plug) and insert again after 10 seconds, - A-device should NOT enumrate B-device. + A-device should NOT enumerate B-device. if A-device wants to use bus: On A-device: @@ -67,7 +67,7 @@ cat /sys/kernel/debug/ci_hdrc.0/registers On B-device: echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req - A-device should resume usb bus and enumrate B-device. + A-device should resume usb bus and enumerate B-device. 1.3 Reference document ---------------------- diff --git a/Documentation/vm/hwpoison.txt b/Documentation/vm/hwpoison.txt index 6ae89a9edf2aac..e912d7eee769a7 100644 --- a/Documentation/vm/hwpoison.txt +++ b/Documentation/vm/hwpoison.txt @@ -104,7 +104,7 @@ madvise(MADV_HWPOISON, ....) hwpoison-inject module through debugfs -/sys/debug/hwpoison/ +/sys/kernel/debug/hwpoison/ corrupt-pfn diff --git a/Documentation/w1/w1.generic b/Documentation/w1/w1.generic index b3ffaf8cfab20f..c51b1ab012d021 100644 --- a/Documentation/w1/w1.generic +++ b/Documentation/w1/w1.generic @@ -76,7 +76,7 @@ See struct w1_bus_master definition in w1.h for details. w1 master sysfs interface ------------------------------------------------------------------ - - A directory for a found device. The format is family-serial + - A directory for a found device. The format is family-serial bus - (standard) symlink to the w1 bus driver - (standard) symlink to the w1 driver w1_master_add - (rw) manually register a slave device diff --git a/LICENSES/exceptions/Linux-syscall-note b/LICENSES/exceptions/Linux-syscall-note new file mode 100644 index 00000000000000..6b60b61be4e9a0 --- /dev/null +++ b/LICENSES/exceptions/Linux-syscall-note @@ -0,0 +1,25 @@ +SPDX-Exception-Identifier: Linux-syscall-note +SPDX-URL: https://spdx.org/licenses/Linux-syscall-note.html +SPDX-Licenses: GPL-2.0, GPL-2.0+, GPL-1.0+, LGPL-2.0, LGPL-2.0+, LGPL-2.1, LGPL-2.1+ +Usage-Guide: + This exception is used together with one of the above SPDX-Licenses + to mark user space API (uapi) header files so they can be included + into non GPL compliant user space application code. + To use this exception add it with the keyword WITH to one of the + identifiers in the SPDX-Licenses tag: + SPDX-License-Identifier: WITH Linux-syscall-note +License-Text: + + NOTE! This copyright does *not* cover user programs that use kernel + services by normal system calls - this is merely considered normal use + of the kernel, and does *not* fall under the heading of "derived work". + Also note that the GPL below is copyrighted by the Free Software + Foundation, but the instance of code that it refers to (the Linux + kernel) is copyrighted by me and others who actually wrote it. + + Also note that the only valid version of the GPL as far as the kernel + is concerned is _this_ particular version of the license (ie v2, not + v2.2 or v3.x or whatever), unless explicitly otherwise stated. + + Linus Torvalds + diff --git a/LICENSES/other/GPL-1.0 b/LICENSES/other/GPL-1.0 new file mode 100644 index 00000000000000..3a4fa969e4c293 --- /dev/null +++ b/LICENSES/other/GPL-1.0 @@ -0,0 +1,260 @@ +Valid-License-Identifier: GPL-1.0+ +SPDX-URL: https://spdx.org/licenses/GPL-1.0.html +Usage-Guide: + The GNU General Public License (GPL) version 1 should not be used in new + code. For existing kernel code the 'or any later version' option is + required to be compatible with the general license of the project: GPLv2. + To use the license in source code, put the following SPDX tag/value pair + into a comment according to the placement guidelines in the licensing + rules documentation: + SPDX-License-Identifier: GPL-1.0+ +License-Text: + + GNU GENERAL PUBLIC LICENSE + Version 1, February 1989 + + Copyright (C) 1989 Free Software Foundation, Inc. + 675 Mass Ave, Cambridge, MA 02139, USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The license agreements of most software companies try to keep users +at the mercy of those companies. By contrast, our General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. The +General Public License applies to the Free Software Foundation's +software and to any other program whose authors commit to using it. +You can use it for your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Specifically, the General Public License is designed to make +sure that you have the freedom to give away or sell copies of free +software, that you receive source code or can get it if you want it, +that you can change the software or use pieces of it in new free +programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of a such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must tell them their rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any program or other work which +contains a notice placed by the copyright holder saying it may be +distributed under the terms of this General Public License. The +"Program", below, refers to any such program or work, and a "work based +on the Program" means either the Program or any work containing the +Program or a portion of it, either verbatim or with modifications. Each +licensee is addressed as "you". + + 1. You may copy and distribute verbatim copies of the Program's source +code as you receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice and +disclaimer of warranty; keep intact all the notices that refer to this +General Public License and to the absence of any warranty; and give any +other recipients of the Program a copy of this General Public License +along with the Program. You may charge a fee for the physical act of +transferring a copy. + + 2. You may modify your copy or copies of the Program or any portion of +it, and copy and distribute such modifications under the terms of Paragraph +1 above, provided that you also do the following: + + a) cause the modified files to carry prominent notices stating that + you changed the files and the date of any change; and + + b) cause the whole of any work that you distribute or publish, that + in whole or in part contains the Program or any part thereof, either + with or without modifications, to be licensed at no charge to all + third parties under the terms of this General Public License (except + that you may choose to grant warranty protection to some or all + third parties, at your option). + + c) If the modified program normally reads commands interactively when + run, you must cause it, when started running for such interactive use + in the simplest and most usual way, to print or display an + announcement including an appropriate copyright notice and a notice + that there is no warranty (or else, saying that you provide a + warranty) and that users may redistribute the program under these + conditions, and telling the user how to view a copy of this General + Public License. + + d) You may charge a fee for the physical act of transferring a + copy, and you may at your option offer warranty protection in + exchange for a fee. + +Mere aggregation of another independent work with the Program (or its +derivative) on a volume of a storage or distribution medium does not bring +the other work under the scope of these terms. + + 3. You may copy and distribute the Program (or a portion or derivative of +it, under Paragraph 2) in object code or executable form under the terms of +Paragraphs 1 and 2 above provided that you also do one of the following: + + a) accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of + Paragraphs 1 and 2 above; or, + + b) accompany it with a written offer, valid for at least three + years, to give any third party free (except for a nominal charge + for the cost of distribution) a complete machine-readable copy of the + corresponding source code, to be distributed under the terms of + Paragraphs 1 and 2 above; or, + + c) accompany it with the information you received as to where the + corresponding source code may be obtained. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form alone.) + +Source code for a work means the preferred form of the work for making +modifications to it. For an executable file, complete source code means +all the source code for all modules it contains; but, as a special +exception, it need not include source code for modules which are standard +libraries that accompany the operating system on which the executable +file runs, or for standard header files or definitions files that +accompany that operating system. + + 4. You may not copy, modify, sublicense, distribute or transfer the +Program except as expressly provided under this General Public License. +Any attempt otherwise to copy, modify, sublicense, distribute or transfer +the Program is void, and will automatically terminate your rights to use +the Program under this License. However, parties who have received +copies, or rights to use copies, from you under this General Public +License will not have their licenses terminated so long as such parties +remain in full compliance. + + 5. By copying, distributing or modifying the Program (or any work based +on the Program) you indicate your acceptance of this license to do so, +and all its terms and conditions. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the original +licensor to copy, distribute or modify the Program subject to these +terms and conditions. You may not impose any further restrictions on the +recipients' exercise of the rights granted herein. + + 7. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of the license which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +the license, you may choose any version ever published by the Free Software +Foundation. + + 8. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + Appendix: How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to humanity, the best way to achieve this is to make it +free software which everyone can redistribute and change under these +terms. + + To do so, attach the following notices to the program. It is safest to +attach them to the start of each source file to most effectively convey +the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + + Copyright (C) 19yy + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19xx name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the +appropriate parts of the General Public License. Of course, the +commands you use may be called something other than `show w' and `show +c'; they could even be mouse-clicks or menu items--whatever suits your +program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + program `Gnomovision' (a program to direct compilers to make passes + at assemblers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +That's all there is to it! diff --git a/LICENSES/other/MPL-1.1 b/LICENSES/other/MPL-1.1 new file mode 100644 index 00000000000000..568b6049efe673 --- /dev/null +++ b/LICENSES/other/MPL-1.1 @@ -0,0 +1,478 @@ +Valid-License-Identifier: MPL-1.1 +SPDX-URL: https://spdx.org/licenses/MPL-1.1.html +Usage-Guide: + To use the Mozilla Public License version 1.1 put the following SPDX + tag/value pair into a comment according to the placement guidelines in + the licensing rules documentation: + SPDX-License-Identifier: MPL-1.1 +License-Text: + + MOZILLA PUBLIC LICENSE + Version 1.1 + + --------------- + +1. Definitions. + + 1.0.1. "Commercial Use" means distribution or otherwise making the + Covered Code available to a third party. + + 1.1. "Contributor" means each entity that creates or contributes to + the creation of Modifications. + + 1.2. "Contributor Version" means the combination of the Original + Code, prior Modifications used by a Contributor, and the Modifications + made by that particular Contributor. + + 1.3. "Covered Code" means the Original Code or Modifications or the + combination of the Original Code and Modifications, in each case + including portions thereof. + + 1.4. "Electronic Distribution Mechanism" means a mechanism generally + accepted in the software development community for the electronic + transfer of data. + + 1.5. "Executable" means Covered Code in any form other than Source + Code. + + 1.6. "Initial Developer" means the individual or entity identified + as the Initial Developer in the Source Code notice required by Exhibit + A. + + 1.7. "Larger Work" means a work which combines Covered Code or + portions thereof with code not governed by the terms of this License. + + 1.8. "License" means this document. + + 1.8.1. "Licensable" means having the right to grant, to the maximum + extent possible, whether at the time of the initial grant or + subsequently acquired, any and all of the rights conveyed herein. + + 1.9. "Modifications" means any addition to or deletion from the + substance or structure of either the Original Code or any previous + Modifications. When Covered Code is released as a series of files, a + Modification is: + A. Any addition to or deletion from the contents of a file + containing Original Code or previous Modifications. + + B. Any new file that contains any part of the Original Code or + previous Modifications. + + 1.10. "Original Code" means Source Code of computer software code + which is described in the Source Code notice required by Exhibit A as + Original Code, and which, at the time of its release under this + License is not already Covered Code governed by this License. + + 1.10.1. "Patent Claims" means any patent claim(s), now owned or + hereafter acquired, including without limitation, method, process, + and apparatus claims, in any patent Licensable by grantor. + + 1.11. "Source Code" means the preferred form of the Covered Code for + making modifications to it, including all modules it contains, plus + any associated interface definition files, scripts used to control + compilation and installation of an Executable, or source code + differential comparisons against either the Original Code or another + well known, available Covered Code of the Contributor's choice. The + Source Code can be in a compressed or archival form, provided the + appropriate decompression or de-archiving software is widely available + for no charge. + + 1.12. "You" (or "Your") means an individual or a legal entity + exercising rights under, and complying with all of the terms of, this + License or a future version of this License issued under Section 6.1. + For legal entities, "You" includes any entity which controls, is + controlled by, or is under common control with You. For purposes of + this definition, "control" means (a) the power, direct or indirect, + to cause the direction or management of such entity, whether by + contract or otherwise, or (b) ownership of more than fifty percent + (50%) of the outstanding shares or beneficial ownership of such + entity. + +2. Source Code License. + + 2.1. The Initial Developer Grant. + The Initial Developer hereby grants You a world-wide, royalty-free, + non-exclusive license, subject to third party intellectual property + claims: + (a) under intellectual property rights (other than patent or + trademark) Licensable by Initial Developer to use, reproduce, + modify, display, perform, sublicense and distribute the Original + Code (or portions thereof) with or without Modifications, and/or + as part of a Larger Work; and + + (b) under Patents Claims infringed by the making, using or + selling of Original Code, to make, have made, use, practice, + sell, and offer for sale, and/or otherwise dispose of the + Original Code (or portions thereof). + + (c) the licenses granted in this Section 2.1(a) and (b) are + effective on the date Initial Developer first distributes + Original Code under the terms of this License. + + (d) Notwithstanding Section 2.1(b) above, no patent license is + granted: 1) for code that You delete from the Original Code; 2) + separate from the Original Code; or 3) for infringements caused + by: i) the modification of the Original Code or ii) the + combination of the Original Code with other software or devices. + + 2.2. Contributor Grant. + Subject to third party intellectual property claims, each Contributor + hereby grants You a world-wide, royalty-free, non-exclusive license + + (a) under intellectual property rights (other than patent or + trademark) Licensable by Contributor, to use, reproduce, modify, + display, perform, sublicense and distribute the Modifications + created by such Contributor (or portions thereof) either on an + unmodified basis, with other Modifications, as Covered Code + and/or as part of a Larger Work; and + + (b) under Patent Claims infringed by the making, using, or + selling of Modifications made by that Contributor either alone + and/or in combination with its Contributor Version (or portions + of such combination), to make, use, sell, offer for sale, have + made, and/or otherwise dispose of: 1) Modifications made by that + Contributor (or portions thereof); and 2) the combination of + Modifications made by that Contributor with its Contributor + Version (or portions of such combination). + + (c) the licenses granted in Sections 2.2(a) and 2.2(b) are + effective on the date Contributor first makes Commercial Use of + the Covered Code. + + (d) Notwithstanding Section 2.2(b) above, no patent license is + granted: 1) for any code that Contributor has deleted from the + Contributor Version; 2) separate from the Contributor Version; + 3) for infringements caused by: i) third party modifications of + Contributor Version or ii) the combination of Modifications made + by that Contributor with other software (except as part of the + Contributor Version) or other devices; or 4) under Patent Claims + infringed by Covered Code in the absence of Modifications made by + that Contributor. + +3. Distribution Obligations. + + 3.1. Application of License. + The Modifications which You create or to which You contribute are + governed by the terms of this License, including without limitation + Section 2.2. The Source Code version of Covered Code may be + distributed only under the terms of this License or a future version + of this License released under Section 6.1, and You must include a + copy of this License with every copy of the Source Code You + distribute. You may not offer or impose any terms on any Source Code + version that alters or restricts the applicable version of this + License or the recipients' rights hereunder. However, You may include + an additional document offering the additional rights described in + Section 3.5. + + 3.2. Availability of Source Code. + Any Modification which You create or to which You contribute must be + made available in Source Code form under the terms of this License + either on the same media as an Executable version or via an accepted + Electronic Distribution Mechanism to anyone to whom you made an + Executable version available; and if made available via Electronic + Distribution Mechanism, must remain available for at least twelve (12) + months after the date it initially became available, or at least six + (6) months after a subsequent version of that particular Modification + has been made available to such recipients. You are responsible for + ensuring that the Source Code version remains available even if the + Electronic Distribution Mechanism is maintained by a third party. + + 3.3. Description of Modifications. + You must cause all Covered Code to which You contribute to contain a + file documenting the changes You made to create that Covered Code and + the date of any change. You must include a prominent statement that + the Modification is derived, directly or indirectly, from Original + Code provided by the Initial Developer and including the name of the + Initial Developer in (a) the Source Code, and (b) in any notice in an + Executable version or related documentation in which You describe the + origin or ownership of the Covered Code. + + 3.4. Intellectual Property Matters + (a) Third Party Claims. + If Contributor has knowledge that a license under a third party's + intellectual property rights is required to exercise the rights + granted by such Contributor under Sections 2.1 or 2.2, + Contributor must include a text file with the Source Code + distribution titled "LEGAL" which describes the claim and the + party making the claim in sufficient detail that a recipient will + know whom to contact. If Contributor obtains such knowledge after + the Modification is made available as described in Section 3.2, + Contributor shall promptly modify the LEGAL file in all copies + Contributor makes available thereafter and shall take other steps + (such as notifying appropriate mailing lists or newsgroups) + reasonably calculated to inform those who received the Covered + Code that new knowledge has been obtained. + + (b) Contributor APIs. + If Contributor's Modifications include an application programming + interface and Contributor has knowledge of patent licenses which + are reasonably necessary to implement that API, Contributor must + also include this information in the LEGAL file. + + (c) Representations. + Contributor represents that, except as disclosed pursuant to + Section 3.4(a) above, Contributor believes that Contributor's + Modifications are Contributor's original creation(s) and/or + Contributor has sufficient rights to grant the rights conveyed by + this License. + + 3.5. Required Notices. + You must duplicate the notice in Exhibit A in each file of the Source + Code. If it is not possible to put such notice in a particular Source + Code file due to its structure, then You must include such notice in a + location (such as a relevant directory) where a user would be likely + to look for such a notice. If You created one or more Modification(s) + You may add your name as a Contributor to the notice described in + Exhibit A. You must also duplicate this License in any documentation + for the Source Code where You describe recipients' rights or ownership + rights relating to Covered Code. You may choose to offer, and to + charge a fee for, warranty, support, indemnity or liability + obligations to one or more recipients of Covered Code. However, You + may do so only on Your own behalf, and not on behalf of the Initial + Developer or any Contributor. You must make it absolutely clear than + any such warranty, support, indemnity or liability obligation is + offered by You alone, and You hereby agree to indemnify the Initial + Developer and every Contributor for any liability incurred by the + Initial Developer or such Contributor as a result of warranty, + support, indemnity or liability terms You offer. + + 3.6. Distribution of Executable Versions. + You may distribute Covered Code in Executable form only if the + requirements of Section 3.1-3.5 have been met for that Covered Code, + and if You include a notice stating that the Source Code version of + the Covered Code is available under the terms of this License, + including a description of how and where You have fulfilled the + obligations of Section 3.2. The notice must be conspicuously included + in any notice in an Executable version, related documentation or + collateral in which You describe recipients' rights relating to the + Covered Code. You may distribute the Executable version of Covered + Code or ownership rights under a license of Your choice, which may + contain terms different from this License, provided that You are in + compliance with the terms of this License and that the license for the + Executable version does not attempt to limit or alter the recipient's + rights in the Source Code version from the rights set forth in this + License. If You distribute the Executable version under a different + license You must make it absolutely clear that any terms which differ + from this License are offered by You alone, not by the Initial + Developer or any Contributor. You hereby agree to indemnify the + Initial Developer and every Contributor for any liability incurred by + the Initial Developer or such Contributor as a result of any such + terms You offer. + + 3.7. Larger Works. + You may create a Larger Work by combining Covered Code with other code + not governed by the terms of this License and distribute the Larger + Work as a single product. In such a case, You must make sure the + requirements of this License are fulfilled for the Covered Code. + +4. Inability to Comply Due to Statute or Regulation. + + If it is impossible for You to comply with any of the terms of this + License with respect to some or all of the Covered Code due to + statute, judicial order, or regulation then You must: (a) comply with + the terms of this License to the maximum extent possible; and (b) + describe the limitations and the code they affect. Such description + must be included in the LEGAL file described in Section 3.4 and must + be included with all distributions of the Source Code. Except to the + extent prohibited by statute or regulation, such description must be + sufficiently detailed for a recipient of ordinary skill to be able to + understand it. + +5. Application of this License. + + This License applies to code to which the Initial Developer has + attached the notice in Exhibit A and to related Covered Code. + +6. Versions of the License. + + 6.1. New Versions. + Netscape Communications Corporation ("Netscape") may publish revised + and/or new versions of the License from time to time. Each version + will be given a distinguishing version number. + + 6.2. Effect of New Versions. + Once Covered Code has been published under a particular version of the + License, You may always continue to use it under the terms of that + version. You may also choose to use such Covered Code under the terms + of any subsequent version of the License published by Netscape. No one + other than Netscape has the right to modify the terms applicable to + Covered Code created under this License. + + 6.3. Derivative Works. + If You create or use a modified version of this License (which you may + only do in order to apply it to code which is not already Covered Code + governed by this License), You must (a) rename Your license so that + the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape", + "MPL", "NPL" or any confusingly similar phrase do not appear in your + license (except to note that your license differs from this License) + and (b) otherwise make it clear that Your version of the license + contains terms which differ from the Mozilla Public License and + Netscape Public License. (Filling in the name of the Initial + Developer, Original Code or Contributor in the notice described in + Exhibit A shall not of themselves be deemed to be modifications of + this License.) + +7. DISCLAIMER OF WARRANTY. + + COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, + WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF + DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. + THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE + IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, + YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE + COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER + OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF + ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. + +8. TERMINATION. + + 8.1. This License and the rights granted hereunder will terminate + automatically if You fail to comply with terms herein and fail to cure + such breach within 30 days of becoming aware of the breach. All + sublicenses to the Covered Code which are properly granted shall + survive any termination of this License. Provisions which, by their + nature, must remain in effect beyond the termination of this License + shall survive. + + 8.2. If You initiate litigation by asserting a patent infringement + claim (excluding declatory judgment actions) against Initial Developer + or a Contributor (the Initial Developer or Contributor against whom + You file such action is referred to as "Participant") alleging that: + + (a) such Participant's Contributor Version directly or indirectly + infringes any patent, then any and all rights granted by such + Participant to You under Sections 2.1 and/or 2.2 of this License + shall, upon 60 days notice from Participant terminate prospectively, + unless if within 60 days after receipt of notice You either: (i) + agree in writing to pay Participant a mutually agreeable reasonable + royalty for Your past and future use of Modifications made by such + Participant, or (ii) withdraw Your litigation claim with respect to + the Contributor Version against such Participant. If within 60 days + of notice, a reasonable royalty and payment arrangement are not + mutually agreed upon in writing by the parties or the litigation claim + is not withdrawn, the rights granted by Participant to You under + Sections 2.1 and/or 2.2 automatically terminate at the expiration of + the 60 day notice period specified above. + + (b) any software, hardware, or device, other than such Participant's + Contributor Version, directly or indirectly infringes any patent, then + any rights granted to You by such Participant under Sections 2.1(b) + and 2.2(b) are revoked effective as of the date You first made, used, + sold, distributed, or had made, Modifications made by that + Participant. + + 8.3. If You assert a patent infringement claim against Participant + alleging that such Participant's Contributor Version directly or + indirectly infringes any patent where such claim is resolved (such as + by license or settlement) prior to the initiation of patent + infringement litigation, then the reasonable value of the licenses + granted by such Participant under Sections 2.1 or 2.2 shall be taken + into account in determining the amount or value of any payment or + license. + + 8.4. In the event of termination under Sections 8.1 or 8.2 above, + all end user license agreements (excluding distributors and resellers) + which have been validly granted by You or any distributor hereunder + prior to termination shall survive termination. + +9. LIMITATION OF LIABILITY. + + UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT + (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL + DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE, + OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR + ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY + CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, + WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER + COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN + INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF + LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY + RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW + PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE + EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO + THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. + +10. U.S. GOVERNMENT END USERS. + + The Covered Code is a "commercial item," as that term is defined in + 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer + software" and "commercial computer software documentation," as such + terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 + C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), + all U.S. Government End Users acquire Covered Code with only those + rights set forth herein. + +11. MISCELLANEOUS. + + This License represents the complete agreement concerning subject + matter hereof. If any provision of this License is held to be + unenforceable, such provision shall be reformed only to the extent + necessary to make it enforceable. This License shall be governed by + California law provisions (except to the extent applicable law, if + any, provides otherwise), excluding its conflict-of-law provisions. + With respect to disputes in which at least one party is a citizen of, + or an entity chartered or registered to do business in the United + States of America, any litigation relating to this License shall be + subject to the jurisdiction of the Federal Courts of the Northern + District of California, with venue lying in Santa Clara County, + California, with the losing party responsible for costs, including + without limitation, court costs and reasonable attorneys' fees and + expenses. The application of the United Nations Convention on + Contracts for the International Sale of Goods is expressly excluded. + Any law or regulation which provides that the language of a contract + shall be construed against the drafter shall not apply to this + License. + +12. RESPONSIBILITY FOR CLAIMS. + + As between Initial Developer and the Contributors, each party is + responsible for claims and damages arising, directly or indirectly, + out of its utilization of rights under this License and You agree to + work with Initial Developer and Contributors to distribute such + responsibility on an equitable basis. Nothing herein is intended or + shall be deemed to constitute any admission of liability. + +13. MULTIPLE-LICENSED CODE. + + Initial Developer may designate portions of the Covered Code as + "Multiple-Licensed". "Multiple-Licensed" means that the Initial + Developer permits you to utilize portions of the Covered Code under + Your choice of the MPL or the alternative licenses, if any, specified + by the Initial Developer in the file described in Exhibit A. + +EXHIBIT A -Mozilla Public License. + + ``The contents of this file are subject to the Mozilla Public License + Version 1.1 (the "License"); you may not use this file except in + compliance with the License. You may obtain a copy of the License at + https://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the + License for the specific language governing rights and limitations + under the License. + + The Original Code is ______________________________________. + + The Initial Developer of the Original Code is ________________________. + Portions created by ______________________ are Copyright (C) ______ + _______________________. All Rights Reserved. + + Contributor(s): ______________________________________. + + Alternatively, the contents of this file may be used under the terms + of the _____ license (the "[___] License"), in which case the + provisions of [______] License are applicable instead of those + above. If you wish to allow use of your version of this file only + under the terms of the [____] License and not to allow others to use + your version of this file under the MPL, indicate your decision by + deleting the provisions above and replace them with the notice and + other provisions required by the [___] License. If you do not delete + the provisions above, a recipient may use your version of this file + under either the MPL or the [___] License." + + [NOTE: The text of this Exhibit A may differ slightly from the text of + the notices in the Source Code files of the Original Code. You should + use the text of this Exhibit A rather than the text found in the + Original Code Source Code for Your Modifications.] diff --git a/LICENSES/preferred/BSD-2-Clause b/LICENSES/preferred/BSD-2-Clause new file mode 100644 index 00000000000000..da366e2ce50be9 --- /dev/null +++ b/LICENSES/preferred/BSD-2-Clause @@ -0,0 +1,32 @@ +Valid-License-Identifier: BSD-2-Clause +SPDX-URL: https://spdx.org/licenses/BSD-2-Clause.html +Usage-Guide: + To use the BSD 2-clause "Simplified" License put the following SPDX + tag/value pair into a comment according to the placement guidelines in + the licensing rules documentation: + SPDX-License-Identifier: BSD-2-Clause +License-Text: + +Copyright (c) . All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. diff --git a/LICENSES/preferred/BSD-3-Clause b/LICENSES/preferred/BSD-3-Clause new file mode 100644 index 00000000000000..34c7f057c8d544 --- /dev/null +++ b/LICENSES/preferred/BSD-3-Clause @@ -0,0 +1,36 @@ +Valid-License-Identifier: BSD-3-Clause +SPDX-URL: https://spdx.org/licenses/BSD-3-Clause.html +Usage-Guide: + To use the BSD 3-clause "New" or "Revised" License put the following SPDX + tag/value pair into a comment according to the placement guidelines in + the licensing rules documentation: + SPDX-License-Identifier: BSD-3-Clause +License-Text: + +Copyright (c) . All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + +3. Neither the name of the copyright holder nor the names of its + contributors may be used to endorse or promote products derived from this + software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. diff --git a/LICENSES/preferred/BSD-3-Clause-Clear b/LICENSES/preferred/BSD-3-Clause-Clear new file mode 100644 index 00000000000000..e53b56092b9051 --- /dev/null +++ b/LICENSES/preferred/BSD-3-Clause-Clear @@ -0,0 +1,41 @@ +Valid-License-Identifier: BSD-3-Clause-Clear +SPDX-URL: https://spdx.org/licenses/BSD-3-Clause-Clear.html +Usage-Guide: + To use the BSD 3-clause "Clear" License put the following SPDX + tag/value pair into a comment according to the placement guidelines in + the licensing rules documentation: + SPDX-License-Identifier: BSD-3-Clause-Clear +License-Text: + +The Clear BSD License + +Copyright (c) [xxxx]-[xxxx] [Owner Organization] +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted (subject to the limitations in the disclaimer +below) provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of [Owner Organization] nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY +THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND +CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT +NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER +OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/LICENSES/preferred/GPL-2.0 b/LICENSES/preferred/GPL-2.0 new file mode 100644 index 00000000000000..b8db91d3a1cbe1 --- /dev/null +++ b/LICENSES/preferred/GPL-2.0 @@ -0,0 +1,353 @@ +Valid-License-Identifier: GPL-2.0 +Valid-License-Identifier: GPL-2.0+ +SPDX-URL: https://spdx.org/licenses/GPL-2.0.html +Usage-Guide: + To use this license in source code, put one of the following SPDX + tag/value pairs into a comment according to the placement + guidelines in the licensing rules documentation. + For 'GNU General Public License (GPL) version 2 only' use: + SPDX-License-Identifier: GPL-2.0 + For 'GNU General Public License (GPL) version 2 or any later version' use: + SPDX-License-Identifier: GPL-2.0+ +License-Text: + + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/LICENSES/preferred/LGPL-2.0 b/LICENSES/preferred/LGPL-2.0 new file mode 100644 index 00000000000000..957d798fe0372d --- /dev/null +++ b/LICENSES/preferred/LGPL-2.0 @@ -0,0 +1,487 @@ +Valid-License-Identifier: LGPL-2.0 +Valid-License-Identifier: LGPL-2.0+ +SPDX-URL: https://spdx.org/licenses/LGPL-2.0.html +Usage-Guide: + To use this license in source code, put one of the following SPDX + tag/value pairs into a comment according to the placement + guidelines in the licensing rules documentation. + For 'GNU Library General Public License (LGPL) version 2.0 only' use: + SPDX-License-Identifier: LGPL-2.0 + For 'GNU Library General Public License (LGPL) version 2.0 or any later + version' use: + SPDX-License-Identifier: LGPL-2.0+ +License-Text: + +GNU LIBRARY GENERAL PUBLIC LICENSE +Version 2, June 1991 + +Copyright (C) 1991 Free Software Foundation, Inc. +51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA + +Everyone is permitted to copy and distribute verbatim copies of this +license document, but changing it is not allowed. + +[This is the first released version of the library GPL. It is numbered 2 +because it goes with version 2 of the ordinary GPL.] + +Preamble + +The licenses for most software are designed to take away your freedom to +share and change it. By contrast, the GNU General Public Licenses are +intended to guarantee your freedom to share and change free software--to +make sure the software is free for all its users. + +This license, the Library General Public License, applies to some specially +designated Free Software Foundation software, and to any other libraries +whose authors decide to use it. You can use it for your libraries, too. + +When we speak of free software, we are referring to freedom, not price. Our +General Public Licenses are designed to make sure that you have the freedom +to distribute copies of free software (and charge for this service if you +wish), that you receive source code or can get it if you want it, that you +can change the software or use pieces of it in new free programs; and that +you know you can do these things. + +To protect your rights, we need to make restrictions that forbid anyone to +deny you these rights or to ask you to surrender the rights. These +restrictions translate to certain responsibilities for you if you +distribute copies of the library, or if you modify it. + +For example, if you distribute copies of the library, whether gratis or for +a fee, you must give the recipients all the rights that we gave you. You +must make sure that they, too, receive or can get the source code. If you +link a program with the library, you must provide complete object files to +the recipients so that they can relink them with the library, after making +changes to the library and recompiling it. And you must show them these +terms so they know their rights. + +Our method of protecting your rights has two steps: (1) copyright the +library, and (2) offer you this license which gives you legal permission to +copy, distribute and/or modify the library. + +Also, for each distributor's protection, we want to make certain that +everyone understands that there is no warranty for this free library. If +the library is modified by someone else and passed on, we want its +recipients to know that what they have is not the original version, so that +any problems introduced by others will not reflect on the original authors' +reputations. + +Finally, any free program is threatened constantly by software patents. We +wish to avoid the danger that companies distributing free software will +individually obtain patent licenses, thus in effect transforming the +program into proprietary software. To prevent this, we have made it clear +that any patent must be licensed for everyone's free use or not licensed at +all. + +Most GNU software, including some libraries, is covered by the ordinary GNU +General Public License, which was designed for utility programs. This +license, the GNU Library General Public License, applies to certain +designated libraries. This license is quite different from the ordinary +one; be sure to read it in full, and don't assume that anything in it is +the same as in the ordinary license. + +The reason we have a separate public license for some libraries is that +they blur the distinction we usually make between modifying or adding to a +program and simply using it. Linking a program with a library, without +changing the library, is in some sense simply using the library, and is +analogous to running a utility program or application program. However, in +a textual and legal sense, the linked executable is a combined work, a +derivative of the original library, and the ordinary General Public License +treats it as such. + +Because of this blurred distinction, using the ordinary General Public +License for libraries did not effectively promote software sharing, because +most developers did not use the libraries. We concluded that weaker +conditions might promote sharing better. + +However, unrestricted linking of non-free programs would deprive the users +of those programs of all benefit from the free status of the libraries +themselves. This Library General Public License is intended to permit +developers of non-free programs to use free libraries, while preserving +your freedom as a user of such programs to change the free libraries that +are incorporated in them. (We have not seen how to achieve this as regards +changes in header files, but we have achieved it as regards changes in the +actual functions of the Library.) The hope is that this will lead to faster +development of free libraries. + +The precise terms and conditions for copying, distribution and modification +follow. Pay close attention to the difference between a "work based on the +library" and a "work that uses the library". The former contains code +derived from the library, while the latter only works together with the +library. + +Note that it is possible for a library to be covered by the ordinary +General Public License rather than by this special one. + +TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + +0. This License Agreement applies to any software library which contains a + notice placed by the copyright holder or other authorized party saying + it may be distributed under the terms of this Library General Public + License (also called "this License"). Each licensee is addressed as + "you". + + A "library" means a collection of software functions and/or data + prepared so as to be conveniently linked with application programs + (which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work which + has been distributed under these terms. A "work based on the Library" + means either the Library or any derivative work under copyright law: + that is to say, a work containing the Library or a portion of it, either + verbatim or with modifications and/or translated straightforwardly into + another language. (Hereinafter, translation is included without + limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for making + modifications to it. For a library, complete source code means all the + source code for all modules it contains, plus any associated interface + definition files, plus the scripts used to control compilation and + installation of the library. + + Activities other than copying, distribution and modification are not + covered by this License; they are outside its scope. The act of running + a program using the Library is not restricted, and output from such a + program is covered only if its contents constitute a work based on the + Library (independent of the use of the Library in a tool for writing + it). Whether that is true depends on what the Library does and what the + program that uses the Library does. + +1. You may copy and distribute verbatim copies of the Library's complete + source code as you receive it, in any medium, provided that you + conspicuously and appropriately publish on each copy an appropriate + copyright notice and disclaimer of warranty; keep intact all the notices + that refer to this License and to the absence of any warranty; and + distribute a copy of this License along with the Library. + + You may charge a fee for the physical act of transferring a copy, and + you may at your option offer warranty protection in exchange for a fee. + +2. You may modify your copy or copies of the Library or any portion of it, + thus forming a work based on the Library, and copy and distribute such + modifications or work under the terms of Section 1 above, provided that + you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices stating + that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no charge to + all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a table + of data to be supplied by an application program that uses the + facility, other than as an argument passed when the facility is + invoked, then you must make a good faith effort to ensure that, in + the event an application does not supply such function or table, the + facility still operates, and performs whatever part of its purpose + remains meaningful. + + (For example, a function in a library to compute square roots has a + purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must be + optional: if the application does not supply it, the square root + function must still compute square roots.) + + These requirements apply to the modified work as a whole. If + identifiable sections of that work are not derived from the Library, and + can be reasonably considered independent and separate works in + themselves, then this License, and its terms, do not apply to those + sections when you distribute them as separate works. But when you + distribute the same sections as part of a whole which is a work based on + the Library, the distribution of the whole must be on the terms of this + License, whose permissions for other licensees extend to the entire + whole, and thus to each and every part regardless of who wrote it. + + Thus, it is not the intent of this section to claim rights or contest + your rights to work written entirely by you; rather, the intent is to + exercise the right to control the distribution of derivative or + collective works based on the Library. + + In addition, mere aggregation of another work not based on the Library + with the Library (or with a work based on the Library) on a volume of a + storage or distribution medium does not bring the other work under the + scope of this License. + +3. You may opt to apply the terms of the ordinary GNU General Public + License instead of this License to a given copy of the Library. To do + this, you must alter all the notices that refer to this License, so that + they refer to the ordinary GNU General Public License, version 2, + instead of to this License. (If a newer version than version 2 of the + ordinary GNU General Public License has appeared, then you can specify + that version instead if you wish.) Do not make any other change in these + notices. + + Once this change is made in a given copy, it is irreversible for that + copy, so the ordinary GNU General Public License applies to all + subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of the + Library into a program that is not a library. + +4. You may copy and distribute the Library (or a portion or derivative of + it, under Section 2) in object code or executable form under the terms + of Sections 1 and 2 above provided that you accompany it with the + complete corresponding machine-readable source code, which must be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange. + + If distribution of object code is made by offering access to copy from a + designated place, then offering equivalent access to copy the source + code from the same place satisfies the requirement to distribute the + source code, even though third parties are not compelled to copy the + source along with the object code. + +5. A program that contains no derivative of any portion of the Library, but + is designed to work with the Library by being compiled or linked with + it, is called a "work that uses the Library". Such a work, in isolation, + is not a derivative work of the Library, and therefore falls outside the + scope of this License. + + However, linking a "work that uses the Library" with the Library creates + an executable that is a derivative of the Library (because it contains + portions of the Library), rather than a "work that uses the + library". The executable is therefore covered by this License. Section 6 + states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file + that is part of the Library, the object code for the work may be a + derivative work of the Library even though the source code is + not. Whether this is true is especially significant if the work can be + linked without the Library, or if the work is itself a library. The + threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data structure + layouts and accessors, and small macros and small inline functions (ten + lines or less in length), then the use of the object file is + unrestricted, regardless of whether it is legally a derivative + work. (Executables containing this object code plus portions of the + Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may + distribute the object code for the work under the terms of Section + 6. Any executables containing that work also fall under Section 6, + whether or not they are linked directly with the Library itself. + +6. As an exception to the Sections above, you may also compile or link a + "work that uses the Library" with the Library to produce a work + containing portions of the Library, and distribute that work under terms + of your choice, provided that the terms permit modification of the work + for the customer's own use and reverse engineering for debugging such + modifications. + + You must give prominent notice with each copy of the work that the + Library is used in it and that the Library and its use are covered by + this License. You must supply a copy of this License. If the work during + execution displays copyright notices, you must include the copyright + notice for the Library among them, as well as a reference directing the + user to the copy of this License. Also, you must do one of these things: + + a) Accompany the work with the complete corresponding machine-readable + source code for the Library including whatever changes were used in + the work (which must be distributed under Sections 1 and 2 above); + and, if the work is an executable linked with the Library, with the + complete machine-readable "work that uses the Library", as object + code and/or source code, so that the user can modify the Library and + then relink to produce a modified executable containing the modified + Library. (It is understood that the user who changes the contents of + definitions files in the Library will not necessarily be able to + recompile the application to use the modified definitions.) + + b) Accompany the work with a written offer, valid for at least three + years, to give the same user the materials specified in Subsection + 6a, above, for a charge no more than the cost of performing this + distribution. + + c) If distribution of the work is made by offering access to copy from a + designated place, offer equivalent access to copy the above specified + materials from the same place. + + d) Verify that the user has already received a copy of these materials + or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the Library" + must include any data and utility programs needed for reproducing the + executable from it. However, as a special exception, the source code + distributed need not include anything that is normally distributed (in + either source or binary form) with the major components (compiler, + kernel, and so on) of the operating system on which the executable runs, + unless that component itself accompanies the executable. + + It may happen that this requirement contradicts the license restrictions + of other proprietary libraries that do not normally accompany the + operating system. Such a contradiction means you cannot use both them + and the Library together in an executable that you distribute. + +7. You may place library facilities that are a work based on the Library + side-by-side in a single library together with other library facilities + not covered by this License, and distribute such a combined library, + provided that the separate distribution of the work based on the Library + and of the other library facilities is otherwise permitted, and provided + that you do these two things: + + a) Accompany the combined library with a copy of the same work based on + the Library, uncombined with any other library facilities. This must + be distributed under the terms of the Sections above. + + b) Give prominent notice with the combined library of the fact that part + of it is a work based on the Library, and explaining where to find + the accompanying uncombined form of the same work. + +8. You may not copy, modify, sublicense, link with, or distribute the + Library except as expressly provided under this License. Any attempt + otherwise to copy, modify, sublicense, link with, or distribute the + Library is void, and will automatically terminate your rights under this + License. However, parties who have received copies, or rights, from you + under this License will not have their licenses terminated so long as + such parties remain in full compliance. + +9. You are not required to accept this License, since you have not signed + it. However, nothing else grants you permission to modify or distribute + the Library or its derivative works. These actions are prohibited by law + if you do not accept this License. Therefore, by modifying or + distributing the Library (or any work based on the Library), you + indicate your acceptance of this License to do so, and all its terms and + conditions for copying, distributing or modifying the Library or works + based on it. + +10. Each time you redistribute the Library (or any work based on the + Library), the recipient automatically receives a license from the + original licensor to copy, distribute, link with or modify the Library + subject to these terms and conditions. You may not impose any further + restrictions on the recipients' exercise of the rights granted + herein. You are not responsible for enforcing compliance by third + parties to this License. + +11. If, as a consequence of a court judgment or allegation of patent + infringement or for any other reason (not limited to patent issues), + conditions are imposed on you (whether by court order, agreement or + otherwise) that contradict the conditions of this License, they do not + excuse you from the conditions of this License. If you cannot + distribute so as to satisfy simultaneously your obligations under this + License and any other pertinent obligations, then as a consequence you + may not distribute the Library at all. For example, if a patent license + would not permit royalty-free redistribution of the Library by all + those who receive copies directly or indirectly through you, then the + only way you could satisfy both it and this License would be to refrain + entirely from distribution of the Library. + + If any portion of this section is held invalid or unenforceable under + any particular circumstance, the balance of the section is intended to + apply, and the section as a whole is intended to apply in other + circumstances. + + It is not the purpose of this section to induce you to infringe any + patents or other property right claims or to contest validity of any + such claims; this section has the sole purpose of protecting the + integrity of the free software distribution system which is implemented + by public license practices. Many people have made generous + contributions to the wide range of software distributed through that + system in reliance on consistent application of that system; it is up + to the author/donor to decide if he or she is willing to distribute + software through any other system and a licensee cannot impose that + choice. + + This section is intended to make thoroughly clear what is believed to + be a consequence of the rest of this License. + +12. If the distribution and/or use of the Library is restricted in certain + countries either by patents or by copyrighted interfaces, the original + copyright holder who places the Library under this License may add an + explicit geographical distribution limitation excluding those + countries, so that distribution is permitted only in or among countries + not thus excluded. In such case, this License incorporates the + limitation as if written in the body of this License. + +13. The Free Software Foundation may publish revised and/or new versions of + the Library General Public License from time to time. Such new versions + will be similar in spirit to the present version, but may differ in + detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the Library + specifies a version number of this License which applies to it and "any + later version", you have the option of following the terms and + conditions either of that version or of any later version published by + the Free Software Foundation. If the Library does not specify a license + version number, you may choose any version ever published by the Free + Software Foundation. + +14. If you wish to incorporate parts of the Library into other free + programs whose distribution conditions are incompatible with these, + write to the author to ask for permission. For software which is + copyrighted by the Free Software Foundation, write to the Free Software + Foundation; we sometimes make exceptions for this. Our decision will be + guided by the two goals of preserving the free status of all + derivatives of our free software and of promoting the sharing and reuse + of software generally. + +NO WARRANTY + +15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY + FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN + OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES + PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER + EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE + ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH + YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL + NECESSARY SERVICING, REPAIR OR CORRECTION. + +16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING + WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR + REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR + DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL + DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY + (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED + INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF + THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR + OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + +END OF TERMS AND CONDITIONS + +How to Apply These Terms to Your New Libraries + +If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms of the +ordinary General Public License). + +To apply these terms, attach the following notices to the library. It is +safest to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + +one line to give the library's name and an idea of what it does. +Copyright (C) year name of author + +This library is free software; you can redistribute it and/or modify it +under the terms of the GNU Library General Public License as published by +the Free Software Foundation; either version 2 of the License, or (at your +option) any later version. + +This library is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public +License for more details. + +You should have received a copy of the GNU Library General Public License +along with this library; if not, write to the Free Software Foundation, +Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the library, if +necessary. Here is a sample; alter the names: + +Yoyodyne, Inc., hereby disclaims all copyright interest in +the library `Frob' (a library for tweaking knobs) written +by James Random Hacker. + +signature of Ty Coon, 1 April 1990 +Ty Coon, President of Vice + +That's all there is to it! diff --git a/LICENSES/preferred/LGPL-2.1 b/LICENSES/preferred/LGPL-2.1 new file mode 100644 index 00000000000000..27bb4342a3e8de --- /dev/null +++ b/LICENSES/preferred/LGPL-2.1 @@ -0,0 +1,503 @@ +Valid-License-Identifier: LGPL-2.1 +Valid-License-Identifier: LGPL-2.1+ +SPDX-URL: https://spdx.org/licenses/LGPL-2.1.html +Usage-Guide: + To use this license in source code, put one of the following SPDX + tag/value pairs into a comment according to the placement + guidelines in the licensing rules documentation. + For 'GNU Lesser General Public License (LGPL) version 2.1 only' use: + SPDX-License-Identifier: LGPL-2.1 + For 'GNU Lesser General Public License (LGPL) version 2.1 or any later + version' use: + SPDX-License-Identifier: LGPL-2.1+ +License-Text: + +GNU LESSER GENERAL PUBLIC LICENSE +Version 2.1, February 1999 + +Copyright (C) 1991, 1999 Free Software Foundation, Inc. +51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + +Everyone is permitted to copy and distribute verbatim copies of this +license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts as +the successor of the GNU Library Public License, version 2, hence the +version number 2.1.] + +Preamble + +The licenses for most software are designed to take away your freedom to +share and change it. By contrast, the GNU General Public Licenses are +intended to guarantee your freedom to share and change free software--to +make sure the software is free for all its users. + +This license, the Lesser General Public License, applies to some specially +designated software packages--typically libraries--of the Free Software +Foundation and other authors who decide to use it. You can use it too, but +we suggest you first think carefully about whether this license or the +ordinary General Public License is the better strategy to use in any +particular case, based on the explanations below. + +When we speak of free software, we are referring to freedom of use, not +price. Our General Public Licenses are designed to make sure that you have +the freedom to distribute copies of free software (and charge for this +service if you wish); that you receive source code or can get it if you +want it; that you can change the software and use pieces of it in new free +programs; and that you are informed that you can do these things. + +To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for you if +you distribute copies of the library or if you modify it. + +For example, if you distribute copies of the library, whether gratis or for +a fee, you must give the recipients all the rights that we gave you. You +must make sure that they, too, receive or can get the source code. If you +link other code with the library, you must provide complete object files to +the recipients, so that they can relink them with the library after making +changes to the library and recompiling it. And you must show them these +terms so they know their rights. + +We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + +To protect each distributor, we want to make it very clear that there is no +warranty for the free library. Also, if the library is modified by someone +else and passed on, the recipients should know that what they have is not +the original version, so that the original author's reputation will not be +affected by problems that might be introduced by others. + +Finally, software patents pose a constant threat to the existence of any +free program. We wish to make sure that a company cannot effectively +restrict the users of a free program by obtaining a restrictive license +from a patent holder. Therefore, we insist that any patent license obtained +for a version of the library must be consistent with the full freedom of +use specified in this license. + +Most GNU software, including some libraries, is covered by the ordinary GNU +General Public License. This license, the GNU Lesser General Public +License, applies to certain designated libraries, and is quite different +from the ordinary General Public License. We use this license for certain +libraries in order to permit linking those libraries into non-free +programs. + +When a program is linked with a library, whether statically or using a +shared library, the combination of the two is legally speaking a combined +work, a derivative of the original library. The ordinary General Public +License therefore permits such linking only if the entire combination fits +its criteria of freedom. The Lesser General Public License permits more lax +criteria for linking other code with the library. + +We call this license the "Lesser" General Public License because it does +Less to protect the user's freedom than the ordinary General Public +License. It also provides other free software developers Less of an +advantage over competing non-free programs. These disadvantages are the +reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + +For example, on rare occasions, there may be a special need to encourage +the widest possible use of a certain library, so that it becomes a de-facto +standard. To achieve this, non-free programs must be allowed to use the +library. A more frequent case is that a free library does the same job as +widely used non-free libraries. In this case, there is little to gain by +limiting the free library to free software only, so we use the Lesser +General Public License. + +In other cases, permission to use a particular library in non-free programs +enables a greater number of people to use a large body of free +software. For example, permission to use the GNU C Library in non-free +programs enables many more people to use the whole GNU operating system, as +well as its variant, the GNU/Linux operating system. + +Although the Lesser General Public License is Less protective of the users' +freedom, it does ensure that the user of a program that is linked with the +Library has the freedom and the wherewithal to run that program using a +modified version of the Library. + +The precise terms and conditions for copying, distribution and modification +follow. Pay close attention to the difference between a "work based on the +library" and a "work that uses the library". The former contains code +derived from the library, whereas the latter must be combined with the +library in order to run. + +TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + +0. This License Agreement applies to any software library or other program + which contains a notice placed by the copyright holder or other + authorized party saying it may be distributed under the terms of this + Lesser General Public License (also called "this License"). Each + licensee is addressed as "you". + + A "library" means a collection of software functions and/or data + prepared so as to be conveniently linked with application programs + (which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work which + has been distributed under these terms. A "work based on the Library" + means either the Library or any derivative work under copyright law: + that is to say, a work containing the Library or a portion of it, either + verbatim or with modifications and/or translated straightforwardly into + another language. (Hereinafter, translation is included without + limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for making + modifications to it. For a library, complete source code means all the + source code for all modules it contains, plus any associated interface + definition files, plus the scripts used to control compilation and + installation of the library. + + Activities other than copying, distribution and modification are not + covered by this License; they are outside its scope. The act of running + a program using the Library is not restricted, and output from such a + program is covered only if its contents constitute a work based on the + Library (independent of the use of the Library in a tool for writing + it). Whether that is true depends on what the Library does and what the + program that uses the Library does. + +1. You may copy and distribute verbatim copies of the Library's complete + source code as you receive it, in any medium, provided that you + conspicuously and appropriately publish on each copy an appropriate + copyright notice and disclaimer of warranty; keep intact all the notices + that refer to this License and to the absence of any warranty; and + distribute a copy of this License along with the Library. + + You may charge a fee for the physical act of transferring a copy, and + you may at your option offer warranty protection in exchange for a fee. + +2. You may modify your copy or copies of the Library or any portion of it, + thus forming a work based on the Library, and copy and distribute such + modifications or work under the terms of Section 1 above, provided that + you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices stating + that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no charge to + all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a table + of data to be supplied by an application program that uses the + facility, other than as an argument passed when the facility is + invoked, then you must make a good faith effort to ensure that, in + the event an application does not supply such function or table, the + facility still operates, and performs whatever part of its purpose + remains meaningful. + + (For example, a function in a library to compute square roots has a + purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must be + optional: if the application does not supply it, the square root + function must still compute square roots.) + + These requirements apply to the modified work as a whole. If + identifiable sections of that work are not derived from the Library, and + can be reasonably considered independent and separate works in + themselves, then this License, and its terms, do not apply to those + sections when you distribute them as separate works. But when you + distribute the same sections as part of a whole which is a work based on + the Library, the distribution of the whole must be on the terms of this + License, whose permissions for other licensees extend to the entire + whole, and thus to each and every part regardless of who wrote it. + + Thus, it is not the intent of this section to claim rights or contest + your rights to work written entirely by you; rather, the intent is to + exercise the right to control the distribution of derivative or + collective works based on the Library. + + In addition, mere aggregation of another work not based on the Library + with the Library (or with a work based on the Library) on a volume of a + storage or distribution medium does not bring the other work under the + scope of this License. + +3. You may opt to apply the terms of the ordinary GNU General Public + License instead of this License to a given copy of the Library. To do + this, you must alter all the notices that refer to this License, so that + they refer to the ordinary GNU General Public License, version 2, + instead of to this License. (If a newer version than version 2 of the + ordinary GNU General Public License has appeared, then you can specify + that version instead if you wish.) Do not make any other change in these + notices. + + Once this change is made in a given copy, it is irreversible for that + copy, so the ordinary GNU General Public License applies to all + subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of the + Library into a program that is not a library. + +4. You may copy and distribute the Library (or a portion or derivative of + it, under Section 2) in object code or executable form under the terms + of Sections 1 and 2 above provided that you accompany it with the + complete corresponding machine-readable source code, which must be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange. + + If distribution of object code is made by offering access to copy from a + designated place, then offering equivalent access to copy the source + code from the same place satisfies the requirement to distribute the + source code, even though third parties are not compelled to copy the + source along with the object code. + +5. A program that contains no derivative of any portion of the Library, but + is designed to work with the Library by being compiled or linked with + it, is called a "work that uses the Library". Such a work, in isolation, + is not a derivative work of the Library, and therefore falls outside the + scope of this License. + + However, linking a "work that uses the Library" with the Library creates + an executable that is a derivative of the Library (because it contains + portions of the Library), rather than a "work that uses the + library". The executable is therefore covered by this License. Section 6 + states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file + that is part of the Library, the object code for the work may be a + derivative work of the Library even though the source code is + not. Whether this is true is especially significant if the work can be + linked without the Library, or if the work is itself a library. The + threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data structure + layouts and accessors, and small macros and small inline functions (ten + lines or less in length), then the use of the object file is + unrestricted, regardless of whether it is legally a derivative + work. (Executables containing this object code plus portions of the + Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may + distribute the object code for the work under the terms of Section + 6. Any executables containing that work also fall under Section 6, + whether or not they are linked directly with the Library itself. + +6. As an exception to the Sections above, you may also combine or link a + "work that uses the Library" with the Library to produce a work + containing portions of the Library, and distribute that work under terms + of your choice, provided that the terms permit modification of the work + for the customer's own use and reverse engineering for debugging such + modifications. + + You must give prominent notice with each copy of the work that the + Library is used in it and that the Library and its use are covered by + this License. You must supply a copy of this License. If the work during + execution displays copyright notices, you must include the copyright + notice for the Library among them, as well as a reference directing the + user to the copy of this License. Also, you must do one of these things: + + a) Accompany the work with the complete corresponding machine-readable + source code for the Library including whatever changes were used in + the work (which must be distributed under Sections 1 and 2 above); + and, if the work is an executable linked with the Library, with the + complete machine-readable "work that uses the Library", as object + code and/or source code, so that the user can modify the Library and + then relink to produce a modified executable containing the modified + Library. (It is understood that the user who changes the contents of + definitions files in the Library will not necessarily be able to + recompile the application to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a copy + of the library already present on the user's computer system, rather + than copying library functions into the executable, and (2) will + operate properly with a modified version of the library, if the user + installs one, as long as the modified version is interface-compatible + with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at least three + years, to give the same user the materials specified in Subsection + 6a, above, for a charge no more than the cost of performing this + distribution. + + d) If distribution of the work is made by offering access to copy from a + designated place, offer equivalent access to copy the above specified + materials from the same place. + + e) Verify that the user has already received a copy of these materials + or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the Library" + must include any data and utility programs needed for reproducing the + executable from it. However, as a special exception, the materials to be + distributed need not include anything that is normally distributed (in + either source or binary form) with the major components (compiler, + kernel, and so on) of the operating system on which the executable runs, + unless that component itself accompanies the executable. + + It may happen that this requirement contradicts the license restrictions + of other proprietary libraries that do not normally accompany the + operating system. Such a contradiction means you cannot use both them + and the Library together in an executable that you distribute. + +7. You may place library facilities that are a work based on the Library + side-by-side in a single library together with other library facilities + not covered by this License, and distribute such a combined library, + provided that the separate distribution of the work based on the Library + and of the other library facilities is otherwise permitted, and provided + that you do these two things: + + a) Accompany the combined library with a copy of the same work based on + the Library, uncombined with any other library facilities. This must + be distributed under the terms of the Sections above. + + b) Give prominent notice with the combined library of the fact that part + of it is a work based on the Library, and explaining where to find + the accompanying uncombined form of the same work. + +8. You may not copy, modify, sublicense, link with, or distribute the + Library except as expressly provided under this License. Any attempt + otherwise to copy, modify, sublicense, link with, or distribute the + Library is void, and will automatically terminate your rights under this + License. However, parties who have received copies, or rights, from you + under this License will not have their licenses terminated so long as + such parties remain in full compliance. + +9. You are not required to accept this License, since you have not signed + it. However, nothing else grants you permission to modify or distribute + the Library or its derivative works. These actions are prohibited by law + if you do not accept this License. Therefore, by modifying or + distributing the Library (or any work based on the Library), you + indicate your acceptance of this License to do so, and all its terms and + conditions for copying, distributing or modifying the Library or works + based on it. + +10. Each time you redistribute the Library (or any work based on the + Library), the recipient automatically receives a license from the + original licensor to copy, distribute, link with or modify the Library + subject to these terms and conditions. You may not impose any further + restrictions on the recipients' exercise of the rights granted + herein. You are not responsible for enforcing compliance by third + parties with this License. + +11. If, as a consequence of a court judgment or allegation of patent + infringement or for any other reason (not limited to patent issues), + conditions are imposed on you (whether by court order, agreement or + otherwise) that contradict the conditions of this License, they do not + excuse you from the conditions of this License. If you cannot + distribute so as to satisfy simultaneously your obligations under this + License and any other pertinent obligations, then as a consequence you + may not distribute the Library at all. For example, if a patent license + would not permit royalty-free redistribution of the Library by all + those who receive copies directly or indirectly through you, then the + only way you could satisfy both it and this License would be to refrain + entirely from distribution of the Library. + + If any portion of this section is held invalid or unenforceable under + any particular circumstance, the balance of the section is intended to + apply, and the section as a whole is intended to apply in other + circumstances. + + It is not the purpose of this section to induce you to infringe any + patents or other property right claims or to contest validity of any + such claims; this section has the sole purpose of protecting the + integrity of the free software distribution system which is implemented + by public license practices. Many people have made generous + contributions to the wide range of software distributed through that + system in reliance on consistent application of that system; it is up + to the author/donor to decide if he or she is willing to distribute + software through any other system and a licensee cannot impose that + choice. + + This section is intended to make thoroughly clear what is believed to + be a consequence of the rest of this License. + +12. If the distribution and/or use of the Library is restricted in certain + countries either by patents or by copyrighted interfaces, the original + copyright holder who places the Library under this License may add an + explicit geographical distribution limitation excluding those + countries, so that distribution is permitted only in or among countries + not thus excluded. In such case, this License incorporates the + limitation as if written in the body of this License. + +13. The Free Software Foundation may publish revised and/or new versions of + the Lesser General Public License from time to time. Such new versions + will be similar in spirit to the present version, but may differ in + detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the Library + specifies a version number of this License which applies to it and "any + later version", you have the option of following the terms and + conditions either of that version or of any later version published by + the Free Software Foundation. If the Library does not specify a license + version number, you may choose any version ever published by the Free + Software Foundation. + +14. If you wish to incorporate parts of the Library into other free + programs whose distribution conditions are incompatible with these, + write to the author to ask for permission. For software which is + copyrighted by the Free Software Foundation, write to the Free Software + Foundation; we sometimes make exceptions for this. Our decision will be + guided by the two goals of preserving the free status of all + derivatives of our free software and of promoting the sharing and reuse + of software generally. + +NO WARRANTY + +15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY + FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN + OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES + PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER + EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE + ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH + YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL + NECESSARY SERVICING, REPAIR OR CORRECTION. + +16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING + WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR + REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR + DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL + DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY + (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED + INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF + THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR + OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + +END OF TERMS AND CONDITIONS + +How to Apply These Terms to Your New Libraries + +If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms of the +ordinary General Public License). + +To apply these terms, attach the following notices to the library. It is +safest to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + +one line to give the library's name and an idea of what it does. +Copyright (C) year name of author + +This library is free software; you can redistribute it and/or modify it +under the terms of the GNU Lesser General Public License as published by +the Free Software Foundation; either version 2.1 of the License, or (at +your option) any later version. + +This library is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License +for more details. + +You should have received a copy of the GNU Lesser General Public License +along with this library; if not, write to the Free Software Foundation, +Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add +information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the library, if +necessary. Here is a sample; alter the names: + +Yoyodyne, Inc., hereby disclaims all copyright interest in +the library `Frob' (a library for tweaking knobs) written +by James Random Hacker. + +signature of Ty Coon, 1 April 1990 +Ty Coon, President of Vice +That's all there is to it! diff --git a/LICENSES/preferred/MIT b/LICENSES/preferred/MIT new file mode 100644 index 00000000000000..f33a68ceb3ea00 --- /dev/null +++ b/LICENSES/preferred/MIT @@ -0,0 +1,30 @@ +Valid-License-Identifier: MIT +SPDX-URL: https://spdx.org/licenses/MIT.html +Usage-Guide: + To use the MIT License put the following SPDX tag/value pair into a + comment according to the placement guidelines in the licensing rules + documentation: + SPDX-License-Identifier: MIT +License-Text: + +MIT License + +Copyright (c) + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the "Software"), +to deal in the Software without restriction, including without limitation +the rights to use, copy, modify, merge, publish, distribute, sublicense, +and/or sell copies of the Software, and to permit persons to whom the +Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS IN THE SOFTWARE. diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h index a36661cd1f053f..f876772c0fb401 100644 --- a/drivers/w1/w1_netlink.h +++ b/drivers/w1/w1_netlink.h @@ -59,7 +59,11 @@ enum w1_netlink_message_types { * @type: one of enum w1_netlink_message_types * @status: kernel feedback for success 0 or errno failure value * @len: length of data following w1_netlink_msg - * @id: union holding master bus id (msg.id) and slave device id (id[8]). + * @id: union holding bus master id (msg.id) and slave device id (id[8]). + * @id.id: Slave ID (8 bytes) + * @id.mst: bus master identification + * @id.mst.id: bus master ID + * @id.mst.res: bus master reserved * @data: start address of any following data * * The base message structure for w1 messages over netlink. diff --git a/fs/9p/Kconfig b/fs/9p/Kconfig index 6489e1fc1afd42..11045d8e356a5c 100644 --- a/fs/9p/Kconfig +++ b/fs/9p/Kconfig @@ -25,9 +25,6 @@ config 9P_FS_POSIX_ACL POSIX Access Control Lists (ACLs) support permissions for users and groups beyond the owner/group/world scheme. - To learn more about Access Control Lists, visit the POSIX ACLs for - Linux website . - If you don't know what Access Control Lists are, say N endif diff --git a/fs/Kconfig b/fs/Kconfig index 7aee6d699fd6b3..0ed56752f20800 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -167,17 +167,13 @@ config TMPFS_POSIX_ACL files for sound to work properly. In short, if you're not sure, say Y. - To learn more about Access Control Lists, visit the POSIX ACLs for - Linux website . - config TMPFS_XATTR bool "Tmpfs extended attributes" depends on TMPFS default n help Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - for details). + the kernel or by users (see the attr(5) manual page for details). Currently this enables support for the trusted.* and security.* namespaces. diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig index 2e558227931aa0..273351ee4c469c 100644 --- a/fs/btrfs/Kconfig +++ b/fs/btrfs/Kconfig @@ -38,9 +38,6 @@ config BTRFS_FS_POSIX_ACL POSIX Access Control Lists (ACLs) support permissions for users and groups beyond the owner/group/world scheme. - To learn more about Access Control Lists, visit the POSIX ACLs for - Linux website . - If you don't know what Access Control Lists are, say N config BTRFS_FS_CHECK_INTEGRITY diff --git a/fs/ceph/Kconfig b/fs/ceph/Kconfig index 264e9bf83ff3f2..52095f47346443 100644 --- a/fs/ceph/Kconfig +++ b/fs/ceph/Kconfig @@ -34,7 +34,4 @@ config CEPH_FS_POSIX_ACL POSIX Access Control Lists (ACLs) support permissions for users and groups beyond the owner/group/world scheme. - To learn more about Access Control Lists, visit the POSIX ACLs for - Linux website . - If you don't know what Access Control Lists are, say N diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig index c71971c01c6341..687da62daf4e5e 100644 --- a/fs/cifs/Kconfig +++ b/fs/cifs/Kconfig @@ -108,14 +108,13 @@ config CIFS_XATTR depends on CIFS help Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - for details). CIFS maps the name of - extended attributes beginning with the user namespace prefix - to SMB/CIFS EAs. EAs are stored on Windows servers without the - user namespace prefix, but their names are seen by Linux cifs clients - prefaced by the user namespace prefix. The system namespace - (used by some filesystems to store ACLs) is not supported at - this time. + the kernel or by users (see the attr(5) manual page for details). + CIFS maps the name of extended attributes beginning with the user + namespace prefix to SMB/CIFS EAs. EAs are stored on Windows + servers without the user namespace prefix, but their names are + seen by Linux cifs clients prefaced by the user namespace prefix. + The system namespace (used by some filesystems to store ACLs) is + not supported at this time. If unsure, say Y. diff --git a/fs/ext2/Kconfig b/fs/ext2/Kconfig index c634874e12d969..894e4c53d1d2c5 100644 --- a/fs/ext2/Kconfig +++ b/fs/ext2/Kconfig @@ -13,8 +13,7 @@ config EXT2_FS_XATTR depends on EXT2_FS help Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - for details). + the kernel or by users (see the attr(5) manual page for details). If unsure, say N. @@ -26,9 +25,6 @@ config EXT2_FS_POSIX_ACL Posix Access Control Lists (ACLs) support permissions for users and groups beyond the owner/group/world scheme. - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website . - If you don't know what Access Control Lists are, say N config EXT2_FS_SECURITY diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig index 73b850f5659c42..a453cc87082b5d 100644 --- a/fs/ext4/Kconfig +++ b/fs/ext4/Kconfig @@ -82,9 +82,6 @@ config EXT4_FS_POSIX_ACL POSIX Access Control Lists (ACLs) support permissions for users and groups beyond the owner/group/world scheme. - To learn more about Access Control Lists, visit the POSIX ACLs for - Linux website . - If you don't know what Access Control Lists are, say N config EXT4_FS_SECURITY diff --git a/fs/f2fs/Kconfig b/fs/f2fs/Kconfig index 378c221d68a92d..9a20ef42fadde4 100644 --- a/fs/f2fs/Kconfig +++ b/fs/f2fs/Kconfig @@ -35,8 +35,7 @@ config F2FS_FS_XATTR default y help Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - for details). + the kernel or by users (see the attr(5) manual page for details). If unsure, say N. @@ -49,9 +48,6 @@ config F2FS_FS_POSIX_ACL Posix Access Control Lists (ACLs) support permissions for users and groups beyond the owner/group/world scheme. - To learn more about Access Control Lists, visit the POSIX ACLs for - Linux website . - If you don't know what Access Control Lists are, say N config F2FS_FS_SECURITY diff --git a/fs/hfsplus/Kconfig b/fs/hfsplus/Kconfig index 24bc20fd42f7b9..7cc8b4acf66ae4 100644 --- a/fs/hfsplus/Kconfig +++ b/fs/hfsplus/Kconfig @@ -20,9 +20,6 @@ config HFSPLUS_FS_POSIX_ACL POSIX Access Control Lists (ACLs) support permissions for users and groups beyond the owner/group/world scheme. - To learn more about Access Control Lists, visit the POSIX ACLs for - Linux website . - It needs to understand that POSIX ACLs are treated only under Linux. POSIX ACLs doesn't mean something under Mac OS X. Mac OS X beginning with version 10.4 ("Tiger") support NFSv4 ACLs, diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig index d8bb6c411e96e1..ad850c5bf2ca47 100644 --- a/fs/jffs2/Kconfig +++ b/fs/jffs2/Kconfig @@ -68,8 +68,7 @@ config JFFS2_FS_XATTR default n help Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - for details). + the kernel or by users (see the attr(5) manual page for details). If unsure, say N. @@ -82,9 +81,6 @@ config JFFS2_FS_POSIX_ACL Posix Access Control Lists (ACLs) support permissions for users and groups beyond the owner/group/world scheme. - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website . - If you don't know what Access Control Lists are, say N config JFFS2_FS_SECURITY diff --git a/fs/jfs/Kconfig b/fs/jfs/Kconfig index 57cef19951dbc5..851de78fdabbbc 100644 --- a/fs/jfs/Kconfig +++ b/fs/jfs/Kconfig @@ -16,9 +16,6 @@ config JFS_POSIX_ACL Posix Access Control Lists (ACLs) support permissions for users and groups beyond the owner/group/world scheme. - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website . - If you don't know what Access Control Lists are, say N config JFS_SECURITY diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig index 7cd46666ba2c04..86e71c0caf4828 100644 --- a/fs/reiserfs/Kconfig +++ b/fs/reiserfs/Kconfig @@ -57,8 +57,7 @@ config REISERFS_FS_XATTR depends on REISERFS_FS help Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - for details). + the kernel or by users (see the attr(5) manual page for details). If unsure, say N. @@ -70,9 +69,6 @@ config REISERFS_FS_POSIX_ACL Posix Access Control Lists (ACLs) support permissions for users and groups beyond the owner/group/world scheme. - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website . - If you don't know what Access Control Lists are, say N config REISERFS_FS_SECURITY diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig index f42fcf1b546553..46bcf0e649f5c9 100644 --- a/fs/xfs/Kconfig +++ b/fs/xfs/Kconfig @@ -48,9 +48,6 @@ config XFS_POSIX_ACL POSIX Access Control Lists (ACLs) support permissions for users and groups beyond the owner/group/world scheme. - To learn more about Access Control Lists, visit the POSIX ACLs for - Linux website . - If you don't know what Access Control Lists are, say N. config XFS_RT diff --git a/include/linux/errseq.h b/include/linux/errseq.h index 6ffae9c5052dd0..fc277777076887 100644 --- a/include/linux/errseq.h +++ b/include/linux/errseq.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * See Documentation/errseq.rst and lib/errseq.c + * See Documentation/core-api/errseq.rst and lib/errseq.c */ #ifndef _LINUX_ERRSEQ_H #define _LINUX_ERRSEQ_H diff --git a/include/linux/refcount.h b/include/linux/refcount.h index e8286585e14978..4193c41e383a89 100644 --- a/include/linux/refcount.h +++ b/include/linux/refcount.h @@ -8,7 +8,7 @@ #include /** - * refcount_t - variant of atomic_t specialized for reference counts + * struct refcount_t - variant of atomic_t specialized for reference counts * @refs: atomic_t counter field * * The counter saturates at UINT_MAX and will not move once diff --git a/lib/errseq.c b/lib/errseq.c index 79cc66897db427..df782418b333ee 100644 --- a/lib/errseq.c +++ b/lib/errseq.c @@ -46,14 +46,14 @@ * @eseq: errseq_t field that should be set * @err: error to set (must be between -1 and -MAX_ERRNO) * - * This function sets the error in *eseq, and increments the sequence counter + * This function sets the error in @eseq, and increments the sequence counter * if the last sequence was sampled at some point in the past. * * Any error set will always overwrite an existing error. * - * We do return the latest value here, primarily for debugging purposes. The - * return value should not be used as a previously sampled value in later calls - * as it will not have the SEEN flag set. + * Return: The previous value, primarily for debugging purposes. The + * return value should not be used as a previously sampled value in later + * calls as it will not have the SEEN flag set. */ errseq_t errseq_set(errseq_t *eseq, int err) { @@ -108,11 +108,13 @@ errseq_t errseq_set(errseq_t *eseq, int err) EXPORT_SYMBOL(errseq_set); /** - * errseq_sample - grab current errseq_t value - * @eseq: pointer to errseq_t to be sampled + * errseq_sample() - Grab current errseq_t value. + * @eseq: Pointer to errseq_t to be sampled. * * This function allows callers to sample an errseq_t value, marking it as * "seen" if required. + * + * Return: The current errseq value. */ errseq_t errseq_sample(errseq_t *eseq) { @@ -134,15 +136,15 @@ errseq_t errseq_sample(errseq_t *eseq) EXPORT_SYMBOL(errseq_sample); /** - * errseq_check - has an error occurred since a particular sample point? - * @eseq: pointer to errseq_t value to be checked - * @since: previously-sampled errseq_t from which to check + * errseq_check() - Has an error occurred since a particular sample point? + * @eseq: Pointer to errseq_t value to be checked. + * @since: Previously-sampled errseq_t from which to check. * - * Grab the value that eseq points to, and see if it has changed "since" - * the given value was sampled. The "since" value is not advanced, so there + * Grab the value that eseq points to, and see if it has changed @since + * the given value was sampled. The @since value is not advanced, so there * is no need to mark the value as seen. * - * Returns the latest error set in the errseq_t or 0 if it hasn't changed. + * Return: The latest error set in the errseq_t or 0 if it hasn't changed. */ int errseq_check(errseq_t *eseq, errseq_t since) { @@ -155,11 +157,11 @@ int errseq_check(errseq_t *eseq, errseq_t since) EXPORT_SYMBOL(errseq_check); /** - * errseq_check_and_advance - check an errseq_t and advance to current value - * @eseq: pointer to value being checked and reported - * @since: pointer to previously-sampled errseq_t to check against and advance + * errseq_check_and_advance() - Check an errseq_t and advance to current value. + * @eseq: Pointer to value being checked and reported. + * @since: Pointer to previously-sampled errseq_t to check against and advance. * - * Grab the eseq value, and see whether it matches the value that "since" + * Grab the eseq value, and see whether it matches the value that @since * points to. If it does, then just return 0. * * If it doesn't, then the value has changed. Set the "seen" flag, and try to @@ -170,6 +172,9 @@ EXPORT_SYMBOL(errseq_check); * value. The caller must provide that if necessary. Because of this, callers * may want to do a lockless errseq_check before taking the lock and calling * this. + * + * Return: Negative errno if one has been stored, or 0 if no new error has + * occurred. */ int errseq_check_and_advance(errseq_t *eseq, errseq_t *since) { diff --git a/lib/uuid.c b/lib/uuid.c index 680b9fb9ba0982..2290b9f001a9e0 100644 --- a/lib/uuid.c +++ b/lib/uuid.c @@ -29,15 +29,14 @@ EXPORT_SYMBOL(uuid_null); const u8 guid_index[16] = {3,2,1,0,5,4,7,6,8,9,10,11,12,13,14,15}; const u8 uuid_index[16] = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15}; -/*************************************************************** +/** + * generate_random_uuid - generate a random UUID + * @uuid: where to put the generated UUID + * * Random UUID interface * - * Used here for a Boot ID, but can be useful for other kernel - * drivers. - ***************************************************************/ - -/* - * Generate random UUID + * Used to create a Boot ID or a filesystem UUID/GUID, but can be + * useful for other kernel drivers. */ void generate_random_uuid(unsigned char uuid[16]) { @@ -73,16 +72,17 @@ void uuid_gen(uuid_t *bu) EXPORT_SYMBOL_GPL(uuid_gen); /** - * uuid_is_valid - checks if UUID string valid - * @uuid: UUID string to check - * - * Description: - * It checks if the UUID string is following the format: - * xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx - * where x is a hex digit. - * - * Return: true if input is valid UUID string. - */ + * uuid_is_valid - checks if a UUID string is valid + * @uuid: UUID string to check + * + * Description: + * It checks if the UUID string is following the format: + * xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx + * + * where x is a hex digit. + * + * Return: true if input is valid UUID string. + */ bool uuid_is_valid(const char *uuid) { unsigned int i; diff --git a/lib/vsprintf.c b/lib/vsprintf.c index 01c3957b2de621..2b18135446dcb8 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -1834,7 +1834,8 @@ static char *ptr_to_id(char *buf, char *end, void *ptr, struct printf_spec spec) * * - 'x' For printing the address. Equivalent to "%lx". * - * ** Please update also Documentation/printk-formats.txt when making changes ** + * ** When making changes please also update: + * Documentation/core-api/printk-formats.rst * * Note: The difference between 'S' and 'F' is that on ia64 and ppc64 * function pointers are really function descriptors, which contain a @@ -2194,7 +2195,7 @@ set_precision(struct printf_spec *spec, int prec) * - ``%n`` is unsupported * - ``%p*`` is handled by pointer() * - * See pointer() or Documentation/printk-formats.txt for more + * See pointer() or Documentation/core-api/printk-formats.rst for more * extensive description. * * **Please update the documentation in both places when making changes** diff --git a/scripts/kernel-doc b/scripts/kernel-doc index df0f045a9a8940..fee8952037b146 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -48,16 +48,11 @@ Read C language source or header FILEs, extract embedded documentation comments, and print formatted documentation to standard output. The documentation comments are identified by "/**" opening comment mark. See -Documentation/kernel-doc-nano-HOWTO.txt for the documentation comment syntax. +Documentation/doc-guide/kernel-doc.rst for the documentation comment syntax. Output format selection (mutually exclusive): - -docbook Output DocBook format. - -html Output HTML format. - -html5 Output HTML5 format. - -list Output symbol list format. This is for use by docproc. -man Output troff manual page format. This is the default. -rst Output reStructuredText format. - -text Output plain text format. -none Do not output documentation, only warnings. Output selection (mutually exclusive): @@ -216,7 +211,7 @@ my $anon_struct_union = 0; my $type_constant = '\b``([^\`]+)``\b'; my $type_constant2 = '\%([-_\w]+)'; my $type_func = '(\w+)\(\)'; -my $type_param = '\@(\w+(\.\.\.)?)'; +my $type_param = '\@(\w*(\.\w+)*(\.\.\.)?)'; my $type_fp_param = '\@(\w+)\(\)'; # Special RST handling for func ptr params my $type_env = '(\$\w+)'; my $type_enum = '\&(enum\s*([_\w]+))'; @@ -225,84 +220,11 @@ my $type_typedef = '\&(typedef\s*([_\w]+))'; my $type_union = '\&(union\s*([_\w]+))'; my $type_member = '\&([_\w]+)(\.|->)([_\w]+)'; my $type_fallback = '\&([_\w]+)'; -my $type_enum_xml = '\&(enum\s*([_\w]+))'; -my $type_struct_xml = '\&(struct\s*([_\w]+))'; -my $type_typedef_xml = '\&(typedef\s*([_\w]+))'; -my $type_union_xml = '\&(union\s*([_\w]+))'; -my $type_member_xml = '\&([_\w]+)(\.|-\>)([_\w]+)'; -my $type_fallback_xml = '\&([_\w]+)'; my $type_member_func = $type_member . '\(\)'; # Output conversion substitutions. # One for each output format -# these work fairly well -my @highlights_html = ( - [$type_constant, "\$1"], - [$type_constant2, "\$1"], - [$type_func, "\$1"], - [$type_enum_xml, "\$1"], - [$type_struct_xml, "\$1"], - [$type_typedef_xml, "\$1"], - [$type_union_xml, "\$1"], - [$type_env, "\$1"], - [$type_param, "\$1"], - [$type_member_xml, "\$1\$2\$3"], - [$type_fallback_xml, "\$1"] - ); -my $local_lt = "\\\\\\\\lt:"; -my $local_gt = "\\\\\\\\gt:"; -my $blankline_html = $local_lt . "p" . $local_gt; # was "

" - -# html version 5 -my @highlights_html5 = ( - [$type_constant, "\$1"], - [$type_constant2, "\$1"], - [$type_func, "\$1"], - [$type_enum_xml, "\$1"], - [$type_struct_xml, "\$1"], - [$type_typedef_xml, "\$1"], - [$type_union_xml, "\$1"], - [$type_env, "\$1"], - [$type_param, "\$1]"], - [$type_member_xml, "\$1\$2\$3"], - [$type_fallback_xml, "\$1"] - ); -my $blankline_html5 = $local_lt . "br /" . $local_gt; - -# XML, docbook format -my @highlights_xml = ( - ["([^=])\\\"([^\\\"<]+)\\\"", "\$1\$2"], - [$type_constant, "\$1"], - [$type_constant2, "\$1"], - [$type_enum_xml, "\$1"], - [$type_struct_xml, "\$1"], - [$type_typedef_xml, "\$1"], - [$type_union_xml, "\$1"], - [$type_param, "\$1"], - [$type_func, "\$1"], - [$type_env, "\$1"], - [$type_member_xml, "\$1\$2\$3"], - [$type_fallback_xml, "\$1"] - ); -my $blankline_xml = $local_lt . "/para" . $local_gt . $local_lt . "para" . $local_gt . "\n"; - -# gnome, docbook format -my @highlights_gnome = ( - [$type_constant, "\$1"], - [$type_constant2, "\$1"], - [$type_func, "\$1"], - [$type_enum, "\$1"], - [$type_struct, "\$1"], - [$type_typedef, "\$1"], - [$type_union, "\$1"], - [$type_env, "\$1"], - [$type_param, "\$1" ], - [$type_member, "\$1\$2\$3"], - [$type_fallback, "\$1"] - ); -my $blankline_gnome = "\n"; - # these are pretty rough my @highlights_man = ( [$type_constant, "\$1"], @@ -318,21 +240,6 @@ my @highlights_man = ( ); my $blankline_man = ""; -# text-mode -my @highlights_text = ( - [$type_constant, "\$1"], - [$type_constant2, "\$1"], - [$type_func, "\$1"], - [$type_enum, "\$1"], - [$type_struct, "\$1"], - [$type_typedef, "\$1"], - [$type_union, "\$1"], - [$type_param, "\$1"], - [$type_member, "\$1\$2\$3"], - [$type_fallback, "\$1"] - ); -my $blankline_text = ""; - # rst-mode my @highlights_rst = ( [$type_constant, "``\$1``"], @@ -352,21 +259,6 @@ my @highlights_rst = ( ); my $blankline_rst = "\n"; -# list mode -my @highlights_list = ( - [$type_constant, "\$1"], - [$type_constant2, "\$1"], - [$type_func, "\$1"], - [$type_enum, "\$1"], - [$type_struct, "\$1"], - [$type_typedef, "\$1"], - [$type_union, "\$1"], - [$type_param, "\$1"], - [$type_member, "\$1"], - [$type_fallback, "\$1"] - ); -my $blankline_list = ""; - # read arguments if ($#ARGV == -1) { usage(); @@ -376,12 +268,12 @@ my $kernelversion; my $dohighlight = ""; my $verbose = 0; -my $output_mode = "man"; +my $output_mode = "rst"; my $output_preformatted = 0; my $no_doc_sections = 0; my $enable_lineno = 0; -my @highlights = @highlights_man; -my $blankline = $blankline_man; +my @highlights = @highlights_rst; +my $blankline = $blankline_rst; my $modulename = "Kernel API"; use constant { @@ -499,71 +391,51 @@ my $undescribed = "-- undescribed --"; reset_state(); -while ($ARGV[0] =~ m/^-(.*)/) { - my $cmd = shift @ARGV; - if ($cmd eq "-html") { - $output_mode = "html"; - @highlights = @highlights_html; - $blankline = $blankline_html; - } elsif ($cmd eq "-html5") { - $output_mode = "html5"; - @highlights = @highlights_html5; - $blankline = $blankline_html5; - } elsif ($cmd eq "-man") { +while ($ARGV[0] =~ m/^--?(.*)/) { + my $cmd = $1; + shift @ARGV; + if ($cmd eq "man") { $output_mode = "man"; @highlights = @highlights_man; $blankline = $blankline_man; - } elsif ($cmd eq "-text") { - $output_mode = "text"; - @highlights = @highlights_text; - $blankline = $blankline_text; - } elsif ($cmd eq "-rst") { + } elsif ($cmd eq "rst") { $output_mode = "rst"; @highlights = @highlights_rst; $blankline = $blankline_rst; - } elsif ($cmd eq "-docbook") { - $output_mode = "xml"; - @highlights = @highlights_xml; - $blankline = $blankline_xml; - } elsif ($cmd eq "-list") { - $output_mode = "list"; - @highlights = @highlights_list; - $blankline = $blankline_list; - } elsif ($cmd eq "-gnome") { - $output_mode = "gnome"; - @highlights = @highlights_gnome; - $blankline = $blankline_gnome; - } elsif ($cmd eq "-none") { + } elsif ($cmd eq "none") { $output_mode = "none"; - } elsif ($cmd eq "-module") { # not needed for XML, inherits from calling document + } elsif ($cmd eq "module") { # not needed for XML, inherits from calling document $modulename = shift @ARGV; - } elsif ($cmd eq "-function") { # to only output specific functions + } elsif ($cmd eq "function") { # to only output specific functions $output_selection = OUTPUT_INCLUDE; $function = shift @ARGV; $function_table{$function} = 1; - } elsif ($cmd eq "-nofunction") { # output all except specific functions + } elsif ($cmd eq "nofunction") { # output all except specific functions $output_selection = OUTPUT_EXCLUDE; $function = shift @ARGV; $function_table{$function} = 1; - } elsif ($cmd eq "-export") { # only exported symbols + } elsif ($cmd eq "export") { # only exported symbols $output_selection = OUTPUT_EXPORTED; %function_table = (); - } elsif ($cmd eq "-internal") { # only non-exported symbols + } elsif ($cmd eq "internal") { # only non-exported symbols $output_selection = OUTPUT_INTERNAL; %function_table = (); - } elsif ($cmd eq "-export-file") { + } elsif ($cmd eq "export-file") { my $file = shift @ARGV; push(@export_file_list, $file); - } elsif ($cmd eq "-v") { + } elsif ($cmd eq "v") { $verbose = 1; - } elsif (($cmd eq "-h") || ($cmd eq "--help")) { + } elsif (($cmd eq "h") || ($cmd eq "help")) { usage(); - } elsif ($cmd eq '-no-doc-sections') { + } elsif ($cmd eq 'no-doc-sections') { $no_doc_sections = 1; - } elsif ($cmd eq '-enable-lineno') { + } elsif ($cmd eq 'enable-lineno') { $enable_lineno = 1; - } elsif ($cmd eq '-show-not-found') { + } elsif ($cmd eq 'show-not-found') { $show_not_found = 1; + } else { + # Unknown argument + usage(); } } @@ -670,22 +542,11 @@ sub output_highlight { # confess "output_highlight got called with no args?\n"; # } - if ($output_mode eq "html" || $output_mode eq "html5" || - $output_mode eq "xml") { - $contents = local_unescape($contents); - # convert data read & converted thru xml_escape() into &xyz; format: - $contents =~ s/\\\\\\/\&/g; - } # print STDERR "contents b4:$contents\n"; eval $dohighlight; die $@ if $@; # print STDERR "contents af:$contents\n"; -# strip whitespaces when generating html5 - if ($output_mode eq "html5") { - $contents =~ s/^\s+//; - $contents =~ s/\s+$//; - } foreach $line (split "\n", $contents) { if (! $output_preformatted) { $line =~ s/^\s*//; @@ -706,817 +567,6 @@ sub output_highlight { } } -# output sections in html -sub output_section_html(%) { - my %args = %{$_[0]}; - my $section; - - foreach $section (@{$args{'sectionlist'}}) { - print "

$section

\n"; - print "
\n"; - output_highlight($args{'sections'}{$section}); - print "
\n"; - } -} - -# output enum in html -sub output_enum_html(%) { - my %args = %{$_[0]}; - my ($parameter); - my $count; - print "

enum " . $args{'enum'} . "

\n"; - - print "enum " . $args{'enum'} . " {
\n"; - $count = 0; - foreach $parameter (@{$args{'parameterlist'}}) { - print " " . $parameter . ""; - if ($count != $#{$args{'parameterlist'}}) { - $count++; - print ",\n"; - } - print "
"; - } - print "};
\n"; - - print "

Constants

\n"; - print "
\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - print "
" . $parameter . "\n"; - print "
"; - output_highlight($args{'parameterdescs'}{$parameter}); - } - print "
\n"; - output_section_html(@_); - print "
\n"; -} - -# output typedef in html -sub output_typedef_html(%) { - my %args = %{$_[0]}; - my ($parameter); - my $count; - print "

typedef " . $args{'typedef'} . "

\n"; - - print "typedef " . $args{'typedef'} . "\n"; - output_section_html(@_); - print "
\n"; -} - -# output struct in html -sub output_struct_html(%) { - my %args = %{$_[0]}; - my ($parameter); - - print "

" . $args{'type'} . " " . $args{'struct'} . " - " . $args{'purpose'} . "

\n"; - print "" . $args{'type'} . " " . $args{'struct'} . " {
\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - if ($parameter =~ /^#/) { - print "$parameter
\n"; - next; - } - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - $type = $args{'parametertypes'}{$parameter}; - if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { - # pointer-to-function - print "    $1$parameter) ($2);
\n"; - } elsif ($type =~ m/^(.*?)\s*(:.*)/) { - # bitfield - print "    $1 $parameter$2;
\n"; - } else { - print "    $type $parameter;
\n"; - } - } - print "};
\n"; - - print "

Members

\n"; - print "
\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - ($parameter =~ /^#/) && next; - - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - print "
" . $parameter . "\n"; - print "
"; - output_highlight($args{'parameterdescs'}{$parameter_name}); - } - print "
\n"; - output_section_html(@_); - print "
\n"; -} - -# output function in html -sub output_function_html(%) { - my %args = %{$_[0]}; - my ($parameter, $section); - my $count; - - print "

" . $args{'function'} . " - " . $args{'purpose'} . "

\n"; - print "" . $args{'functiontype'} . "\n"; - print "" . $args{'function'} . "\n"; - print "("; - $count = 0; - foreach $parameter (@{$args{'parameterlist'}}) { - $type = $args{'parametertypes'}{$parameter}; - if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { - # pointer-to-function - print "$1$parameter) ($2)"; - } else { - print "" . $type . " " . $parameter . ""; - } - if ($count != $#{$args{'parameterlist'}}) { - $count++; - print ",\n"; - } - } - print ")\n"; - - print "

Arguments

\n"; - print "
\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - print "
" . $parameter . "\n"; - print "
"; - output_highlight($args{'parameterdescs'}{$parameter_name}); - } - print "
\n"; - output_section_html(@_); - print "
\n"; -} - -# output DOC: block header in html -sub output_blockhead_html(%) { - my %args = %{$_[0]}; - my ($parameter, $section); - my $count; - - foreach $section (@{$args{'sectionlist'}}) { - print "

$section

\n"; - print "
    \n"; - output_highlight($args{'sections'}{$section}); - print "
\n"; - } - print "
\n"; -} - -# output sections in html5 -sub output_section_html5(%) { - my %args = %{$_[0]}; - my $section; - - foreach $section (@{$args{'sectionlist'}}) { - print "
\n"; - print "

$section

\n"; - print "

\n"; - output_highlight($args{'sections'}{$section}); - print "

\n"; - print "
\n"; - } -} - -# output enum in html5 -sub output_enum_html5(%) { - my %args = %{$_[0]}; - my ($parameter); - my $count; - my $html5id; - - $html5id = $args{'enum'}; - $html5id =~ s/[^a-zA-Z0-9\-]+/_/g; - print "
"; - print "

enum " . $args{'enum'} . "

\n"; - print "
    \n"; - print "
  1. "; - print "enum "; - print "" . $args{'enum'} . " {"; - print "
    2. \n"; - $count = 0; - foreach $parameter (@{$args{'parameterlist'}}) { - print "
  2. "; - print "" . $parameter . ""; - if ($count != $#{$args{'parameterlist'}}) { - $count++; - print ","; - } - print "
    3. \n"; - } - print "
  3. };
    4. \n"; - print "
\n"; - - print "
\n"; - print "

Constants

\n"; - print "
\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - print "
" . $parameter . "
\n"; - print "
"; - output_highlight($args{'parameterdescs'}{$parameter}); - print "
\n"; - } - print "
\n"; - print "
\n"; - output_section_html5(@_); - print "
\n"; -} - -# output typedef in html5 -sub output_typedef_html5(%) { - my %args = %{$_[0]}; - my ($parameter); - my $count; - my $html5id; - - $html5id = $args{'typedef'}; - $html5id =~ s/[^a-zA-Z0-9\-]+/_/g; - print "
\n"; - print "

typedef " . $args{'typedef'} . "

\n"; - - print "
    \n"; - print "
  1. "; - print "typedef "; - print "" . $args{'typedef'} . ""; - print "
    2. \n"; - print "
\n"; - output_section_html5(@_); - print "
\n"; -} - -# output struct in html5 -sub output_struct_html5(%) { - my %args = %{$_[0]}; - my ($parameter); - my $html5id; - - $html5id = $args{'struct'}; - $html5id =~ s/[^a-zA-Z0-9\-]+/_/g; - print "
\n"; - print "
\n"; - print "

" . $args{'type'} . " " . $args{'struct'} . "

"; - print "

". $args{'purpose'} . "

\n"; - print "
\n"; - print "
    \n"; - print "
  1. "; - print "" . $args{'type'} . " "; - print "" . $args{'struct'} . " {"; - print "
    2. \n"; - foreach $parameter (@{$args{'parameterlist'}}) { - print "
  2. "; - if ($parameter =~ /^#/) { - print "" . $parameter ."\n"; - print "
    3. \n"; - next; - } - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - $type = $args{'parametertypes'}{$parameter}; - if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { - # pointer-to-function - print "$1 "; - print "$parameter"; - print ") "; - print "($2);"; - } elsif ($type =~ m/^(.*?)\s*(:.*)/) { - # bitfield - print "$1 "; - print "$parameter"; - print "$2;"; - } else { - print "$type "; - print "$parameter;"; - } - print "\n"; - } - print "
  3. };
    4. \n"; - print "
\n"; - - print "
\n"; - print "

Members

\n"; - print "
\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - ($parameter =~ /^#/) && next; - - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - print "
" . $parameter . "
\n"; - print "
"; - output_highlight($args{'parameterdescs'}{$parameter_name}); - print "
\n"; - } - print "
\n"; - print "
\n"; - output_section_html5(@_); - print "
\n"; -} - -# output function in html5 -sub output_function_html5(%) { - my %args = %{$_[0]}; - my ($parameter, $section); - my $count; - my $html5id; - - $html5id = $args{'function'}; - $html5id =~ s/[^a-zA-Z0-9\-]+/_/g; - print "
\n"; - print "
\n"; - print "

" . $args{'function'} . "

"; - print "

" . $args{'purpose'} . "

\n"; - print "
\n"; - print "
    \n"; - print "
  1. "; - print "" . $args{'functiontype'} . " "; - print "" . $args{'function'} . " ("; - print "
    2. "; - $count = 0; - foreach $parameter (@{$args{'parameterlist'}}) { - print "
  2. "; - $type = $args{'parametertypes'}{$parameter}; - if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { - # pointer-to-function - print "$1 "; - print "$parameter"; - print ") "; - print "($2)"; - } else { - print "$type "; - print "$parameter"; - } - if ($count != $#{$args{'parameterlist'}}) { - $count++; - print ","; - } - print "
    3. \n"; - } - print "
  3. )
    4. \n"; - print "
\n"; - - print "
\n"; - print "

Arguments

\n"; - print "

\n"; - print "

\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - print "
" . $parameter . "
\n"; - print "
"; - output_highlight($args{'parameterdescs'}{$parameter_name}); - print "
\n"; - } - print "
\n"; - print "
\n"; - output_section_html5(@_); - print "
\n"; -} - -# output DOC: block header in html5 -sub output_blockhead_html5(%) { - my %args = %{$_[0]}; - my ($parameter, $section); - my $count; - my $html5id; - - foreach $section (@{$args{'sectionlist'}}) { - $html5id = $section; - $html5id =~ s/[^a-zA-Z0-9\-]+/_/g; - print "
\n"; - print "

$section

\n"; - print "

\n"; - output_highlight($args{'sections'}{$section}); - print "

\n"; - } - print "
\n"; -} - -sub output_section_xml(%) { - my %args = %{$_[0]}; - my $section; - # print out each section - $lineprefix=" "; - foreach $section (@{$args{'sectionlist'}}) { - print "\n"; - print "$section\n"; - if ($section =~ m/EXAMPLE/i) { - print "\n"; - $output_preformatted = 1; - } else { - print "\n"; - } - output_highlight($args{'sections'}{$section}); - $output_preformatted = 0; - if ($section =~ m/EXAMPLE/i) { - print "\n"; - } else { - print "\n"; - } - print "\n"; - } -} - -# output function in XML DocBook -sub output_function_xml(%) { - my %args = %{$_[0]}; - my ($parameter, $section); - my $count; - my $id; - - $id = "API-" . $args{'function'}; - $id =~ s/[^A-Za-z0-9]/-/g; - - print "\n"; - print "\n"; - print " LINUX\n"; - print " Kernel Hackers Manual\n"; - print " $man_date\n"; - print "\n"; - print "\n"; - print " " . $args{'function'} . "\n"; - print " 9\n"; - print " " . $kernelversion . "\n"; - print "\n"; - print "\n"; - print " " . $args{'function'} . "\n"; - print " \n"; - print " "; - output_highlight ($args{'purpose'}); - print " \n"; - print "\n"; - - print "\n"; - print " Synopsis\n"; - print " \n"; - print " " . $args{'functiontype'} . " "; - print "" . $args{'function'} . " \n"; - - $count = 0; - if ($#{$args{'parameterlist'}} >= 0) { - foreach $parameter (@{$args{'parameterlist'}}) { - $type = $args{'parametertypes'}{$parameter}; - if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { - # pointer-to-function - print " $1$parameter)\n"; - print " $2\n"; - } else { - print " " . $type; - print " $parameter\n"; - } - } - } else { - print " \n"; - } - print " \n"; - print "\n"; - - # print parameters - print "\n Arguments\n"; - if ($#{$args{'parameterlist'}} >= 0) { - print " \n"; - foreach $parameter (@{$args{'parameterlist'}}) { - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - $type = $args{'parametertypes'}{$parameter}; - - print " \n $type $parameter\n"; - print " \n \n"; - $lineprefix=" "; - output_highlight($args{'parameterdescs'}{$parameter_name}); - print " \n \n \n"; - } - print " \n"; - } else { - print " \n None\n \n"; - } - print "\n"; - - output_section_xml(@_); - print "\n\n"; -} - -# output struct in XML DocBook -sub output_struct_xml(%) { - my %args = %{$_[0]}; - my ($parameter, $section); - my $id; - - $id = "API-struct-" . $args{'struct'}; - $id =~ s/[^A-Za-z0-9]/-/g; - - print "\n"; - print "\n"; - print " LINUX\n"; - print " Kernel Hackers Manual\n"; - print " $man_date\n"; - print "\n"; - print "\n"; - print " " . $args{'type'} . " " . $args{'struct'} . "\n"; - print " 9\n"; - print " " . $kernelversion . "\n"; - print "\n"; - print "\n"; - print " " . $args{'type'} . " " . $args{'struct'} . "\n"; - print " \n"; - print " "; - output_highlight ($args{'purpose'}); - print " \n"; - print "\n"; - - print "\n"; - print " Synopsis\n"; - print " \n"; - print $args{'type'} . " " . $args{'struct'} . " {\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - if ($parameter =~ /^#/) { - my $prm = $parameter; - # convert data read & converted thru xml_escape() into &xyz; format: - # This allows us to have #define macros interspersed in a struct. - $prm =~ s/\\\\\\/\&/g; - print "$prm\n"; - next; - } - - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - defined($args{'parameterdescs'}{$parameter_name}) || next; - ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - $type = $args{'parametertypes'}{$parameter}; - if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { - # pointer-to-function - print " $1 $parameter) ($2);\n"; - } elsif ($type =~ m/^(.*?)\s*(:.*)/) { - # bitfield - print " $1 $parameter$2;\n"; - } else { - print " " . $type . " " . $parameter . ";\n"; - } - } - print "};"; - print " \n"; - print "\n"; - - print " \n"; - print " Members\n"; - - if ($#{$args{'parameterlist'}} >= 0) { - print " \n"; - foreach $parameter (@{$args{'parameterlist'}}) { - ($parameter =~ /^#/) && next; - - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - defined($args{'parameterdescs'}{$parameter_name}) || next; - ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - $type = $args{'parametertypes'}{$parameter}; - print " "; - print " $type $parameter\n"; - print " \n"; - output_highlight($args{'parameterdescs'}{$parameter_name}); - print " \n"; - print " \n"; - } - print " \n"; - } else { - print " \n None\n \n"; - } - print " \n"; - - output_section_xml(@_); - - print "\n\n"; -} - -# output enum in XML DocBook -sub output_enum_xml(%) { - my %args = %{$_[0]}; - my ($parameter, $section); - my $count; - my $id; - - $id = "API-enum-" . $args{'enum'}; - $id =~ s/[^A-Za-z0-9]/-/g; - - print "\n"; - print "\n"; - print " LINUX\n"; - print " Kernel Hackers Manual\n"; - print " $man_date\n"; - print "\n"; - print "\n"; - print " enum " . $args{'enum'} . "\n"; - print " 9\n"; - print " " . $kernelversion . "\n"; - print "\n"; - print "\n"; - print " enum " . $args{'enum'} . "\n"; - print " \n"; - print " "; - output_highlight ($args{'purpose'}); - print " \n"; - print "\n"; - - print "\n"; - print " Synopsis\n"; - print " \n"; - print "enum " . $args{'enum'} . " {\n"; - $count = 0; - foreach $parameter (@{$args{'parameterlist'}}) { - print " $parameter"; - if ($count != $#{$args{'parameterlist'}}) { - $count++; - print ","; - } - print "\n"; - } - print "};"; - print " \n"; - print "\n"; - - print "\n"; - print " Constants\n"; - print " \n"; - foreach $parameter (@{$args{'parameterlist'}}) { - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - print " "; - print " $parameter\n"; - print " \n"; - output_highlight($args{'parameterdescs'}{$parameter_name}); - print " \n"; - print " \n"; - } - print " \n"; - print "\n"; - - output_section_xml(@_); - - print "\n\n"; -} - -# output typedef in XML DocBook -sub output_typedef_xml(%) { - my %args = %{$_[0]}; - my ($parameter, $section); - my $id; - - $id = "API-typedef-" . $args{'typedef'}; - $id =~ s/[^A-Za-z0-9]/-/g; - - print "\n"; - print "\n"; - print " LINUX\n"; - print " Kernel Hackers Manual\n"; - print " $man_date\n"; - print "\n"; - print "\n"; - print " typedef " . $args{'typedef'} . "\n"; - print " 9\n"; - print "\n"; - print "\n"; - print " typedef " . $args{'typedef'} . "\n"; - print " \n"; - print " "; - output_highlight ($args{'purpose'}); - print " \n"; - print "\n"; - - print "\n"; - print " Synopsis\n"; - print " typedef " . $args{'typedef'} . ";\n"; - print "\n"; - - output_section_xml(@_); - - print "\n\n"; -} - -# output in XML DocBook -sub output_blockhead_xml(%) { - my %args = %{$_[0]}; - my ($parameter, $section); - my $count; - - my $id = $args{'module'}; - $id =~ s/[^A-Za-z0-9]/-/g; - - # print out each section - $lineprefix=" "; - foreach $section (@{$args{'sectionlist'}}) { - if (!$args{'content-only'}) { - print "\n $section\n"; - } - if ($section =~ m/EXAMPLE/i) { - print "\n"; - $output_preformatted = 1; - } else { - print "\n"; - } - output_highlight($args{'sections'}{$section}); - $output_preformatted = 0; - if ($section =~ m/EXAMPLE/i) { - print "\n"; - } else { - print ""; - } - if (!$args{'content-only'}) { - print "\n\n"; - } - } - - print "\n\n"; -} - -# output in XML DocBook -sub output_function_gnome { - my %args = %{$_[0]}; - my ($parameter, $section); - my $count; - my $id; - - $id = $args{'module'} . "-" . $args{'function'}; - $id =~ s/[^A-Za-z0-9]/-/g; - - print "\n"; - print " " . $args{'function'} . "\n"; - - print " \n"; - print " " . $args{'functiontype'} . " "; - print "" . $args{'function'} . " "; - print "\n"; - - $count = 0; - if ($#{$args{'parameterlist'}} >= 0) { - foreach $parameter (@{$args{'parameterlist'}}) { - $type = $args{'parametertypes'}{$parameter}; - if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { - # pointer-to-function - print " $1 $parameter)\n"; - print " $2\n"; - } else { - print " " . $type; - print " $parameter\n"; - } - } - } else { - print " \n"; - } - print " \n"; - if ($#{$args{'parameterlist'}} >= 0) { - print " \n"; - print "\n"; - print "\n"; - print "\n"; - print "\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - print " $parameter\n"; - print " \n"; - $lineprefix=" "; - output_highlight($args{'parameterdescs'}{$parameter_name}); - print " \n"; - } - print " \n"; - } else { - print " \n None\n \n"; - } - - # print out each section - $lineprefix=" "; - foreach $section (@{$args{'sectionlist'}}) { - print "\n $section\n"; - if ($section =~ m/EXAMPLE/i) { - print "\n"; - $output_preformatted = 1; - } else { - } - print "\n"; - output_highlight($args{'sections'}{$section}); - $output_preformatted = 0; - print "\n"; - if ($section =~ m/EXAMPLE/i) { - print "\n"; - } else { - } - print " \n"; - } - - print "\n\n"; -} - ## # output function in man sub output_function_man(%) { @@ -1620,32 +670,12 @@ sub output_struct_man(%) { print ".SH NAME\n"; print $args{'type'} . " " . $args{'struct'} . " \\- " . $args{'purpose'} . "\n"; + my $declaration = $args{'definition'}; + $declaration =~ s/\t/ /g; + $declaration =~ s/\n/"\n.br\n.BI \"/g; print ".SH SYNOPSIS\n"; print $args{'type'} . " " . $args{'struct'} . " {\n.br\n"; - - foreach my $parameter (@{$args{'parameterlist'}}) { - if ($parameter =~ /^#/) { - print ".BI \"$parameter\"\n.br\n"; - next; - } - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - $type = $args{'parametertypes'}{$parameter}; - if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { - # pointer-to-function - print ".BI \" " . $1 . "\" " . $parameter . " \") (" . $2 . ")" . "\"\n;\n"; - } elsif ($type =~ m/^(.*?)\s*(:.*)/) { - # bitfield - print ".BI \" " . $1 . "\ \" " . $parameter . $2 . " \"" . "\"\n;\n"; - } else { - $type =~ s/([^\*])$/$1 /; - print ".BI \" " . $type . "\" " . $parameter . " \"" . "\"\n;\n"; - } - print "\n.br\n"; - } - print "};\n.br\n"; + print ".BI \"$declaration\n};\n.br\n\n"; print ".SH Members\n"; foreach $parameter (@{$args{'parameterlist'}}) { @@ -1694,161 +724,6 @@ sub output_blockhead_man(%) { } } -## -# output in text -sub output_function_text(%) { - my %args = %{$_[0]}; - my ($parameter, $section); - my $start; - - print "Name:\n\n"; - print $args{'function'} . " - " . $args{'purpose'} . "\n"; - - print "\nSynopsis:\n\n"; - if ($args{'functiontype'} ne "") { - $start = $args{'functiontype'} . " " . $args{'function'} . " ("; - } else { - $start = $args{'function'} . " ("; - } - print $start; - - my $count = 0; - foreach my $parameter (@{$args{'parameterlist'}}) { - $type = $args{'parametertypes'}{$parameter}; - if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { - # pointer-to-function - print $1 . $parameter . ") (" . $2; - } else { - print $type . " " . $parameter; - } - if ($count != $#{$args{'parameterlist'}}) { - $count++; - print ",\n"; - print " " x length($start); - } else { - print ");\n\n"; - } - } - - print "Arguments:\n\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - print $parameter . "\n\t" . $args{'parameterdescs'}{$parameter_name} . "\n"; - } - output_section_text(@_); -} - -#output sections in text -sub output_section_text(%) { - my %args = %{$_[0]}; - my $section; - - print "\n"; - foreach $section (@{$args{'sectionlist'}}) { - print "$section:\n\n"; - output_highlight($args{'sections'}{$section}); - } - print "\n\n"; -} - -# output enum in text -sub output_enum_text(%) { - my %args = %{$_[0]}; - my ($parameter); - my $count; - print "Enum:\n\n"; - - print "enum " . $args{'enum'} . " - " . $args{'purpose'} . "\n\n"; - print "enum " . $args{'enum'} . " {\n"; - $count = 0; - foreach $parameter (@{$args{'parameterlist'}}) { - print "\t$parameter"; - if ($count != $#{$args{'parameterlist'}}) { - $count++; - print ","; - } - print "\n"; - } - print "};\n\n"; - - print "Constants:\n\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - print "$parameter\n\t"; - print $args{'parameterdescs'}{$parameter} . "\n"; - } - - output_section_text(@_); -} - -# output typedef in text -sub output_typedef_text(%) { - my %args = %{$_[0]}; - my ($parameter); - my $count; - print "Typedef:\n\n"; - - print "typedef " . $args{'typedef'} . " - " . $args{'purpose'} . "\n"; - output_section_text(@_); -} - -# output struct as text -sub output_struct_text(%) { - my %args = %{$_[0]}; - my ($parameter); - - print $args{'type'} . " " . $args{'struct'} . " - " . $args{'purpose'} . "\n\n"; - print $args{'type'} . " " . $args{'struct'} . " {\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - if ($parameter =~ /^#/) { - print "$parameter\n"; - next; - } - - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - $type = $args{'parametertypes'}{$parameter}; - if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { - # pointer-to-function - print "\t$1 $parameter) ($2);\n"; - } elsif ($type =~ m/^(.*?)\s*(:.*)/) { - # bitfield - print "\t$1 $parameter$2;\n"; - } else { - print "\t" . $type . " " . $parameter . ";\n"; - } - } - print "};\n\n"; - - print "Members:\n\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - ($parameter =~ /^#/) && next; - - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - print "$parameter\n\t"; - print $args{'parameterdescs'}{$parameter_name} . "\n"; - } - print "\n"; - output_section_text(@_); -} - -sub output_blockhead_text(%) { - my %args = %{$_[0]}; - my ($parameter, $section); - - foreach $section (@{$args{'sectionlist'}}) { - print " $section:\n"; - print " -> "; - output_highlight($args{'sections'}{$section}); - } -} - ## # output in restructured text # @@ -2038,29 +913,9 @@ sub output_struct_rst(%) { print "**Definition**\n\n"; print "::\n\n"; - print " " . $args{'type'} . " " . $args{'struct'} . " {\n"; - foreach $parameter (@{$args{'parameterlist'}}) { - if ($parameter =~ /^#/) { - print " " . "$parameter\n"; - next; - } - - my $parameter_name = $parameter; - $parameter_name =~ s/\[.*//; - - ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next; - $type = $args{'parametertypes'}{$parameter}; - if ($type =~ m/([^\(]*\(\*)\s*\)\s*\(([^\)]*)\)/) { - # pointer-to-function - print " $1 $parameter) ($2);\n"; - } elsif ($type =~ m/^(.*?)\s*(:.*)/) { - # bitfield - print " $1 $parameter$2;\n"; - } else { - print " " . $type . " " . $parameter . ";\n"; - } - } - print " };\n\n"; + my $declaration = $args{'definition'}; + $declaration =~ s/\t/ /g; + print " " . $args{'type'} . " " . $args{'struct'} . " {\n$declaration };\n\n"; print "**Members**\n\n"; $lineprefix = " "; @@ -2083,44 +938,6 @@ sub output_struct_rst(%) { output_section_rst(@_); } - -## list mode output functions - -sub output_function_list(%) { - my %args = %{$_[0]}; - - print $args{'function'} . "\n"; -} - -# output enum in list -sub output_enum_list(%) { - my %args = %{$_[0]}; - print $args{'enum'} . "\n"; -} - -# output typedef in list -sub output_typedef_list(%) { - my %args = %{$_[0]}; - print $args{'typedef'} . "\n"; -} - -# output struct as list -sub output_struct_list(%) { - my %args = %{$_[0]}; - - print $args{'struct'} . "\n"; -} - -sub output_blockhead_list(%) { - my %args = %{$_[0]}; - my ($parameter, $section); - - foreach $section (@{$args{'sectionlist'}}) { - print "DOC: $section\n"; - } -} - - ## none mode output functions sub output_function_none(%) { @@ -2186,39 +1003,128 @@ sub dump_union($$) { sub dump_struct($$) { my $x = shift; my $file = shift; - my $nested; if ($x =~ /(struct|union)\s+(\w+)\s*{(.*)}/) { my $decl_type = $1; $declaration_name = $2; my $members = $3; - # ignore embedded structs or unions - $members =~ s/({.*})//g; - $nested = $1; - # ignore members marked private: $members =~ s/\/\*\s*private:.*?\/\*\s*public:.*?\*\///gosi; $members =~ s/\/\*\s*private:.*//gosi; # strip comments: $members =~ s/\/\*.*?\*\///gos; - $nested =~ s/\/\*.*?\*\///gos; # strip attributes $members =~ s/__attribute__\s*\(\([a-z,_\*\s\(\)]*\)\)//i; $members =~ s/__aligned\s*\([^;]*\)//gos; $members =~ s/\s*CRYPTO_MINALIGN_ATTR//gos; # replace DECLARE_BITMAP - $members =~ s/DECLARE_BITMAP\s*\(([^,)]+), ([^,)]+)\)/unsigned long $1\[BITS_TO_LONGS($2)\]/gos; + $members =~ s/DECLARE_BITMAP\s*\(([^,)]+),\s*([^,)]+)\)/unsigned long $1\[BITS_TO_LONGS($2)\]/gos; # replace DECLARE_HASHTABLE - $members =~ s/DECLARE_HASHTABLE\s*\(([^,)]+), ([^,)]+)\)/unsigned long $1\[1 << (($2) - 1)\]/gos; - - create_parameterlist($members, ';', $file); - check_sections($file, $declaration_name, $decl_type, $sectcheck, $struct_actual, $nested); - + $members =~ s/DECLARE_HASHTABLE\s*\(([^,)]+),\s*([^,)]+)\)/unsigned long $1\[1 << (($2) - 1)\]/gos; + # replace DECLARE_KFIFO + $members =~ s/DECLARE_KFIFO\s*\(([^,)]+),\s*([^,)]+),\s*([^,)]+)\)/$2 \*$1/gos; + # replace DECLARE_KFIFO_PTR + $members =~ s/DECLARE_KFIFO_PTR\s*\(([^,)]+),\s*([^,)]+)\)/$2 \*$1/gos; + + my $declaration = $members; + + # Split nested struct/union elements as newer ones + while ($members =~ m/(struct|union)([^\{\};]+)\{([^\{\}]*)\}([^\{\}\;]*)\;/) { + my $newmember; + my $maintype = $1; + my $ids = $4; + my $content = $3; + foreach my $id(split /,/, $ids) { + $newmember .= "$maintype $id; "; + + $id =~ s/[:\[].*//; + $id =~ s/^\s*\**(\S+)\s*/$1/; + foreach my $arg (split /;/, $content) { + next if ($arg =~ m/^\s*$/); + if ($arg =~ m/^([^\(]+\(\*?\s*)([\w\.]*)(\s*\).*)/) { + # pointer-to-function + my $type = $1; + my $name = $2; + my $extra = $3; + next if (!$name); + if ($id =~ m/^\s*$/) { + # anonymous struct/union + $newmember .= "$type$name$extra; "; + } else { + $newmember .= "$type$id.$name$extra; "; + } + } else { + my $type; + my $names; + $arg =~ s/^\s+//; + $arg =~ s/\s+$//; + # Handle bitmaps + $arg =~ s/:\s*\d+\s*//g; + # Handle arrays + $arg =~ s/\[\S+\]//g; + # The type may have multiple words, + # and multiple IDs can be defined, like: + # const struct foo, *bar, foobar + # So, we remove spaces when parsing the + # names, in order to match just names + # and commas for the names + $arg =~ s/\s*,\s*/,/g; + if ($arg =~ m/(.*)\s+([\S+,]+)/) { + $type = $1; + $names = $2; + } else { + $newmember .= "$arg; "; + next; + } + foreach my $name (split /,/, $names) { + $name =~ s/^\s*\**(\S+)\s*/$1/; + next if (($name =~ m/^\s*$/)); + if ($id =~ m/^\s*$/) { + # anonymous struct/union + $newmember .= "$type $name; "; + } else { + $newmember .= "$type $id.$name; "; + } + } + } + } + } + $members =~ s/(struct|union)([^\{\};]+)\{([^\{\}]*)}([^\{\}\;]*)\;/$newmember/; + } + + # Ignore other nested elements, like enums + $members =~ s/({[^\{\}]*})//g; + + create_parameterlist($members, ';', $file, $declaration_name); + check_sections($file, $declaration_name, $decl_type, $sectcheck, $struct_actual); + + # Adjust declaration for better display + $declaration =~ s/([{;])/$1\n/g; + $declaration =~ s/}\s+;/};/g; + # Better handle inlined enums + do {} while ($declaration =~ s/(enum\s+{[^}]+),([^\n])/$1,\n$2/); + + my @def_args = split /\n/, $declaration; + my $level = 1; + $declaration = ""; + foreach my $clause (@def_args) { + $clause =~ s/^\s+//; + $clause =~ s/\s+$//; + $clause =~ s/\s+/ /; + next if (!$clause); + $level-- if ($clause =~ m/(})/ && $level > 1); + if (!($clause =~ m/^\s*#/)) { + $declaration .= "\t" x $level; + } + $declaration .= "\t" . $clause . "\n"; + $level++ if ($clause =~ m/({)/ && !($clause =~m/}/)); + } output_declaration($declaration_name, 'struct', {'struct' => $declaration_name, 'module' => $modulename, + 'definition' => $declaration, 'parameterlist' => \@parameterlist, 'parameterdescs' => \%parameterdescs, 'parametertypes' => \%parametertypes, @@ -2234,6 +1140,44 @@ sub dump_struct($$) { } } + +sub show_warnings($$) { + my $functype = shift; + my $name = shift; + + return 1 if ($output_selection == OUTPUT_ALL); + + if ($output_selection == OUTPUT_EXPORTED) { + if (defined($function_table{$name})) { + return 1; + } else { + return 0; + } + } + if ($output_selection == OUTPUT_INTERNAL) { + if (!($functype eq "function" && defined($function_table{$name}))) { + return 1; + } else { + return 0; + } + } + if ($output_selection == OUTPUT_INCLUDE) { + if (defined($function_table{$name})) { + return 1; + } else { + return 0; + } + } + if ($output_selection == OUTPUT_EXCLUDE) { + if (!defined($function_table{$name})) { + return 1; + } else { + return 0; + } + } + die("Please add the new output type at show_warnings()"); +} + sub dump_enum($$) { my $x = shift; my $file = shift; @@ -2254,16 +1198,18 @@ sub dump_enum($$) { push @parameterlist, $arg; if (!$parameterdescs{$arg}) { $parameterdescs{$arg} = $undescribed; - print STDERR "${file}:$.: warning: Enum value '$arg' ". - "not described in enum '$declaration_name'\n"; + if (show_warnings("enum", $declaration_name)) { + print STDERR "${file}:$.: warning: Enum value '$arg' not described in enum '$declaration_name'\n"; + } } $_members{$arg} = 1; } while (my ($k, $v) = each %parameterdescs) { if (!exists($_members{$k})) { - print STDERR "${file}:$.: warning: Excess enum value " . - "'$k' description in '$declaration_name'\n"; + if (show_warnings("enum", $declaration_name)) { + print STDERR "${file}:$.: warning: Excess enum value '$k' description in '$declaration_name'\n"; + } } } @@ -2299,7 +1245,7 @@ sub dump_typedef($$) { $declaration_name = $2; my $args = $3; - create_parameterlist($args, ',', $file); + create_parameterlist($args, ',', $file, $declaration_name); output_declaration($declaration_name, 'function', @@ -2348,10 +1294,11 @@ sub save_struct_actual($) { $struct_actual = $struct_actual . $actual . " "; } -sub create_parameterlist($$$) { +sub create_parameterlist($$$$) { my $args = shift; my $splitter = shift; my $file = shift; + my $declaration_name = shift; my $type; my $param; @@ -2376,12 +1323,12 @@ sub create_parameterlist($$$) { } elsif ($arg =~ m/\(.+\)\s*\(/) { # pointer-to-function $arg =~ tr/#/,/; - $arg =~ m/[^\(]+\(\*?\s*(\w*)\s*\)/; + $arg =~ m/[^\(]+\(\*?\s*([\w\.]*)\s*\)/; $param = $1; $type = $arg; $type =~ s/([^\(]+\(\*?)\s*$param/$1/; save_struct_actual($param); - push_parameter($param, $type, $file); + push_parameter($param, $type, $file, $declaration_name); } elsif ($arg) { $arg =~ s/\s*:\s*/:/g; $arg =~ s/\s*\[/\[/g; @@ -2406,27 +1353,28 @@ sub create_parameterlist($$$) { foreach $param (@args) { if ($param =~ m/^(\*+)\s*(.*)/) { save_struct_actual($2); - push_parameter($2, "$type $1", $file); + push_parameter($2, "$type $1", $file, $declaration_name); } elsif ($param =~ m/(.*?):(\d+)/) { if ($type ne "") { # skip unnamed bit-fields save_struct_actual($1); - push_parameter($1, "$type:$2", $file) + push_parameter($1, "$type:$2", $file, $declaration_name) } } else { save_struct_actual($param); - push_parameter($param, $type, $file); + push_parameter($param, $type, $file, $declaration_name); } } } } } -sub push_parameter($$$) { +sub push_parameter($$$$) { my $param = shift; my $type = shift; my $file = shift; + my $declaration_name = shift; if (($anon_struct_union == 1) && ($type eq "") && ($param eq "}")) { @@ -2463,21 +1411,15 @@ sub push_parameter($$$) { # warn if parameter has no description # (but ignore ones starting with # as these are not parameters # but inline preprocessor statements); - # also ignore unnamed structs/unions; - if (!$anon_struct_union) { + # Note: It will also ignore void params and unnamed structs/unions if (!defined $parameterdescs{$param} && $param !~ /^#/) { + $parameterdescs{$param} = $undescribed; - $parameterdescs{$param} = $undescribed; - - if (($type eq 'function') || ($type eq 'enum')) { - print STDERR "${file}:$.: warning: Function parameter ". - "or member '$param' not " . - "described in '$declaration_name'\n"; - } - print STDERR "${file}:$.: warning:" . - " No description found for parameter '$param'\n"; - ++$warnings; - } + if (show_warnings($type, $declaration_name)) { + print STDERR + "${file}:$.: warning: Function parameter or member '$param' not described in '$declaration_name'\n"; + ++$warnings; + } } $param = xml_escape($param); @@ -2496,8 +1438,8 @@ sub push_parameter($$$) { $parametertypes{$param} = $type; } -sub check_sections($$$$$$) { - my ($file, $decl_name, $decl_type, $sectcheck, $prmscheck, $nested) = @_; +sub check_sections($$$$$) { + my ($file, $decl_name, $decl_type, $sectcheck, $prmscheck) = @_; my @sects = split ' ', $sectcheck; my @prms = split ' ', $prmscheck; my $err; @@ -2531,14 +1473,6 @@ sub check_sections($$$$$$) { "'$sects[$sx]' " . "description in '$decl_name'\n"; ++$warnings; - } else { - if ($nested !~ m/\Q$sects[$sx]\E/) { - print STDERR "${file}:$.: warning: " . - "Excess $decl_type member " . - "'$sects[$sx]' " . - "description in '$decl_name'\n"; - ++$warnings; - } } } } @@ -2642,14 +1576,14 @@ sub dump_function($$) { $declaration_name = $2; my $args = $3; - create_parameterlist($args, ',', $file); + create_parameterlist($args, ',', $file, $declaration_name); } else { print STDERR "${file}:$.: warning: cannot understand function prototype: '$prototype'\n"; return; } my $prms = join " ", @parameterlist; - check_sections($file, $declaration_name, "function", $sectcheck, $prms, ""); + check_sections($file, $declaration_name, "function", $sectcheck, $prms); # This check emits a lot of warnings at the moment, because many # functions don't have a 'Return' doc section. So until the number @@ -2718,7 +1652,7 @@ sub tracepoint_munge($) { sub syscall_munge() { my $void = 0; - $prototype =~ s@[\r\n\t]+@ @gos; # strip newlines/CR's/tabs + $prototype =~ s@[\r\n]+@ @gos; # strip newlines/CR's ## if ($prototype =~ m/SYSCALL_DEFINE0\s*\(\s*(a-zA-Z0-9_)*\s*\)/) { if ($prototype =~ m/SYSCALL_DEFINE0/) { $void = 1; @@ -2823,7 +1757,7 @@ sub process_proto_type($$) { # just before actual output; (this is done by local_unescape()) sub xml_escape($) { my $text = shift; - if (($output_mode eq "text") || ($output_mode eq "man")) { + if ($output_mode eq "man") { return $text; } $text =~ s/\&/\\\\\\amp;/g; @@ -2835,7 +1769,7 @@ sub xml_escape($) { # xml_unescape: reverse the effects of xml_escape sub xml_unescape($) { my $text = shift; - if (($output_mode eq "text") || ($output_mode eq "man")) { + if ($output_mode eq "man") { return $text; } $text =~ s/\\\\\\amp;/\&/g; @@ -2848,7 +1782,7 @@ sub xml_unescape($) { # local escape strings look like: '\\\\menmonic:' (that's 4 backslashes) sub local_unescape($) { my $text = shift; - if (($output_mode eq "text") || ($output_mode eq "man")) { + if ($output_mode eq "man") { return $text; } $text =~ s/\\\\\\\\lt:/; } + # Replace tabs by spaces + while ($_ =~ s/\t+/' ' x (length($&) * 8 - length($`) % 8)/e) {}; if ($state == STATE_NORMAL) { if (/$doc_start/o) { $state = STATE_NAME; # next line is always the function name @@ -3016,8 +1952,7 @@ sub process_file($) { $in_purpose = 0; $contents = $newcontents; $new_start_line = $.; - while ((substr($contents, 0, 1) eq " ") || - substr($contents, 0, 1) eq "\t") { + while (substr($contents, 0, 1) eq " ") { $contents = substr($contents, 1); } if ($contents ne "") { @@ -3086,8 +2021,7 @@ sub process_file($) { $contents = $2; $new_start_line = $.; if ($contents ne "") { - while ((substr($contents, 0, 1) eq " ") || - substr($contents, 0, 1) eq "\t") { + while (substr($contents, 0, 1) eq " ") { $contents = substr($contents, 1); } $contents .= "\n"; @@ -3170,34 +2104,6 @@ sub process_file($) { if (($output_selection == OUTPUT_INCLUDE) && ($show_not_found == 1)) { print STDERR " Was looking for '$_'.\n" for keys %function_table; } - if ($output_mode eq "xml") { - # The template wants at least one RefEntry here; make one. - print "\n"; - print " \n"; - print " \n"; - print " ${orig_file}\n"; - print " \n"; - print " \n"; - print " Document generation inconsistency\n"; - print " \n"; - print " \n"; - print " \n"; - print " \n"; - print " Oops\n"; - print " \n"; - print " \n"; - print " \n"; - print " The template for this document tried to insert\n"; - print " the structured comment from the file\n"; - print " ${orig_file} at this point,\n"; - print " but none was found.\n"; - print " This dummy section is inserted to allow\n"; - print " generation to continue.\n"; - print " \n"; - print " \n"; - print " \n"; - print "\n"; - } } }