This document describes how to build an out-of-tree kernel module.
"kbuild" is the build system used by the Linux kernel. Modules must use kbuild to stay compatible with changes in the build infrastructure and to pick up the right flags to "gcc." Functionality for building modules both in-tree and out-of-tree is provided. The method for building either is similar, and all modules are initially developed and built out-of-tree.
Covered in this document is information aimed at developers interested in building out-of-tree (or "external") modules. The author of an external module should supply a makefile that hides most of the complexity, so one only has to type "make" to build the module. This is easily accomplished, and a complete example will be presented in section 3.
To build external modules, you must have a prebuilt kernel available that contains the configuration and header files used in the build. Also, the kernel must have been built with modules enabled. If you are using a distribution kernel, there will be a package for the kernel you are running provided by your distribution.
An alternative is to use the "make" target "modules_prepare." This will make sure the kernel contains the information required. The target exists solely as a simple way to prepare a kernel source tree for building external modules.
NOTE: "modules_prepare" will not build Module.symvers even if CONFIG_MODVERSIONS is set; therefore, a full kernel build needs to be executed to make module versioning work.
The command to build an external module is:
$ make -C <path_to_kernel_src> M=$PWDThe kbuild system knows that an external module is being built due to the "M=<dir>" option given in the command.
To build against the running kernel use:
$ make -C /lib/modules/`uname -r`/build M=$PWDThen to install the module(s) just built, add the target "modules_install" to the command:
$ make -C /lib/modules/`uname -r`/build M=$PWD modules_install
($KDIR refers to the path of the kernel source directory.)
make -C $KDIR M=$PWD
- -C $KDIR
- The directory where the kernel source is located. "make" will actually change to the specified directory when executing and will change back when finished.
- M=$PWD
- Informs kbuild that an external module is being built. The value given to "M" is the absolute path of the directory where the external module (kbuild file) is located.
When building an external module, only a subset of the "make" targets are available.
make -C $KDIR M=$PWD [target]
The default will build the module(s) located in the current directory, so a target does not need to be specified. All output files will also be generated in this directory. No attempts are made to update the kernel source, and it is a precondition that a successful "make" has been executed for the kernel.
- modules
- The default target for external modules. It has the same functionality as if no target was specified. See description above.
- modules_install
- Install the external module(s). The default location is /lib/modules/<kernel_release>/extra/, but a prefix may be added with INSTALL_MOD_PATH (discussed in section 5).
- clean
- Remove all generated files in the module directory only.
- help
- List the available targets for external modules.
It is possible to build single files that are part of a module. This works equally well for the kernel, a module, and even for external modules.
Example (The module foo.ko, consist of bar.o and baz.o):
make -C $KDIR M=$PWD bar.lst make -C $KDIR M=$PWD baz.o make -C $KDIR M=$PWD foo.ko make -C $KDIR M=$PWD ./
In the last section we saw the command to build a module for the running kernel. The module is not actually built, however, because a build file is required. Contained in this file will be the name of the module(s) being built, along with the list of requisite source files. The file may be as simple as a single line:
obj-m := <module_name>.o
The kbuild system will build <module_name>.o from <module_name>.c, and, after linking, will result in the kernel module <module_name>.ko. The above line can be put in either a "Kbuild" file or a "Makefile." When the module is built from multiple sources, an additional line is needed listing the files:
<module_name>-y := <src1>.o <src2>.o ...
NOTE: Further documentation describing the syntax used by kbuild is located in Documentation/kbuild/makefiles.rst.
The examples below demonstrate how to create a build file for the module 8123.ko, which is built from the following files:
8123_if.c 8123_if.h 8123_pci.c 8123_bin.o_shipped <= Binary blob
--- 3.1 Shared Makefile
An external module always includes a wrapper makefile that supports building the module using "make" with no arguments. This target is not used by kbuild; it is only for convenience. Additional functionality, such as test targets, can be included but should be filtered out from kbuild due to possible name clashes.
Example 1:
--> filename: Makefile ifneq ($(KERNELRELEASE),) # kbuild part of makefile obj-m := 8123.o 8123-y := 8123_if.o 8123_pci.o 8123_bin.o else # normal makefile KDIR ?= /lib/modules/`uname -r`/build default: $(MAKE) -C $(KDIR) M=$$PWD # Module specific targets genbin: echo "X" > 8123_bin.o_shipped endifThe check for KERNELRELEASE is used to separate the two parts of the makefile. In the example, kbuild will only see the two assignments, whereas "make" will see everything except these two assignments. This is due to two passes made on the file: the first pass is by the "make" instance run on the command line; the second pass is by the kbuild system, which is initiated by the parameterized "make" in the default target.
In newer versions of the kernel, kbuild will first look for a file named "Kbuild," and only if that is not found, will it then look for a makefile. Utilizing a "Kbuild" file allows us to split up the makefile from example 1 into two files:
Example 2:
--> filename: Kbuild obj-m := 8123.o 8123-y := 8123_if.o 8123_pci.o 8123_bin.o --> filename: Makefile KDIR ?= /lib/modules/`uname -r`/build default: $(MAKE) -C $(KDIR) M=$$PWD # Module specific targets genbin: echo "X" > 8123_bin.o_shippedThe split in example 2 is questionable due to the simplicity of each file; however, some external modules use makefiles consisting of several hundred lines, and here it really pays off to separate the kbuild part from the rest.
The next example shows a backward compatible version.
Example 3:
--> filename: Kbuild obj-m := 8123.o 8123-y := 8123_if.o 8123_pci.o 8123_bin.o --> filename: Makefile ifneq ($(KERNELRELEASE),) # kbuild part of makefile include Kbuild else # normal makefile KDIR ?= /lib/modules/`uname -r`/build default: $(MAKE) -C $(KDIR) M=$$PWD # Module specific targets genbin: echo "X" > 8123_bin.o_shipped endifHere the "Kbuild" file is included from the makefile. This allows an older version of kbuild, which only knows of makefiles, to be used when the "make" and kbuild parts are split into separate files.
Some external modules need to include an object file as a blob. kbuild has support for this, but requires the blob file to be named <filename>_shipped. When the kbuild rules kick in, a copy of <filename>_shipped is created with _shipped stripped off, giving us <filename>. This shortened filename can be used in the assignment to the module.
Throughout this section, 8123_bin.o_shipped has been used to build the kernel module 8123.ko; it has been included as 8123_bin.o:
8123-y := 8123_if.o 8123_pci.o 8123_bin.oAlthough there is no distinction between the ordinary source files and the binary file, kbuild will pick up different rules when creating the object file for the module.
kbuild supports building multiple modules with a single build file. For example, if you wanted to build two modules, foo.ko and bar.ko, the kbuild lines would be:
obj-m := foo.o bar.o foo-y := <foo_srcs> bar-y := <bar_srcs>It is that simple!
Within the kernel, header files are kept in standard locations according to the following rule:
If the header file only describes the internal interface of a module, then the file is placed in the same directory as the source files.
If the header file describes an interface used by other parts of the kernel that are located in different directories, then the file is placed in include/linux/.
- NOTE:
There are two notable exceptions to this rule: larger subsystems have their own directory under include/, such as include/scsi; and architecture specific headers are located under arch/$(ARCH)/include/.
To include a header file located under include/linux/, simply use:
#include <linux/module.h>kbuild will add options to "gcc" so the relevant directories are searched.
External modules tend to place header files in a separate include/ directory where their source is located, although this is not the usual kernel style. To inform kbuild of the directory, use either ccflags-y or CFLAGS_<filename>.o.
Using the example from section 3, if we moved 8123_if.h to a subdirectory named include, the resulting kbuild file would look like:
--> filename: Kbuild obj-m := 8123.o ccflags-y := -Iinclude 8123-y := 8123_if.o 8123_pci.o 8123_bin.oNote that in the assignment there is no space between -I and the path. This is a limitation of kbuild: there must be no space present.
kbuild can handle files that are spread over several directories. Consider the following example:
. |__ src | |__ complex_main.c | |__ hal | |__ hardwareif.c | |__ include | |__ hardwareif.h |__ include |__ complex.hTo build the module complex.ko, we then need the following kbuild file:
--> filename: Kbuild obj-m := complex.o complex-y := src/complex_main.o complex-y += src/hal/hardwareif.o ccflags-y := -I$(src)/include ccflags-y += -I$(src)/src/hal/includeAs you can see, kbuild knows how to handle object files located in other directories. The trick is to specify the directory relative to the kbuild file's location. That being said, this is NOT recommended practice.
For the header files, kbuild must be explicitly told where to look. When kbuild executes, the current directory is always the root of the kernel tree (the argument to "-C") and therefore an absolute path is needed. $(src) provides the absolute path by pointing to the directory where the currently executing kbuild file is located.
Modules which are included in the kernel are installed in the directory:
/lib/modules/$(KERNELRELEASE)/kernel/
And external modules are installed in:
/lib/modules/$(KERNELRELEASE)/extra/
Above are the default directories but as always some level of customization is possible. A prefix can be added to the installation path using the variable INSTALL_MOD_PATH:
$ make INSTALL_MOD_PATH=/frodo modules_install => Install dir: /frodo/lib/modules/$(KERNELRELEASE)/kernel/INSTALL_MOD_PATH may be set as an ordinary shell variable or, as shown above, can be specified on the command line when calling "make." This has effect when installing both in-tree and out-of-tree modules.
External modules are by default installed to a directory under /lib/modules/$(KERNELRELEASE)/extra/, but you may wish to locate modules for a specific functionality in a separate directory. For this purpose, use INSTALL_MOD_DIR to specify an alternative name to "extra.":
$ make INSTALL_MOD_DIR=gandalf -C $KDIR \ M=$PWD modules_install => Install dir: /lib/modules/$(KERNELRELEASE)/gandalf/
Module versioning is enabled by the CONFIG_MODVERSIONS tag, and is used as a simple ABI consistency check. A CRC value of the full prototype for an exported symbol is created. When a module is loaded/used, the CRC values contained in the kernel are compared with similar values in the module; if they are not equal, the kernel refuses to load the module.
Module.symvers contains a list of all exported symbols from a kernel build.
During a kernel build, a file named Module.symvers will be generated. Module.symvers contains all exported symbols from the kernel and compiled modules. For each symbol, the corresponding CRC value is also stored.
The syntax of the Module.symvers file is:
<CRC> <Symbol> <Module> <Export Type> <Namespace>0xe1cc2a05 usb_stor_suspend drivers/usb/storage/usb-storage EXPORT_SYMBOL_GPL USB_STORAGE
The fields are separated by tabs and values may be empty (e.g. if no namespace is defined for an exported symbol).
For a kernel build without CONFIG_MODVERSIONS enabled, the CRC would read 0x00000000.
Module.symvers serves two purposes:
- It lists all exported symbols from vmlinux and all modules.
- It lists the CRC if CONFIG_MODVERSIONS is enabled.
When building an external module, the build system needs access to the symbols from the kernel to check if all external symbols are defined. This is done in the MODPOST step. modpost obtains the symbols by reading Module.symvers from the kernel source tree. During the MODPOST step, a new Module.symvers file will be written containing all exported symbols from that external module.
Sometimes, an external module uses exported symbols from another external module. Kbuild needs to have full knowledge of all symbols to avoid spitting out warnings about undefined symbols. Two solutions exist for this situation.
NOTE: The method with a top-level kbuild file is recommended but may be impractical in certain situations.
- Use a top-level kbuild file
If you have two modules, foo.ko and bar.ko, where foo.ko needs symbols from bar.ko, you can use a common top-level kbuild file so both modules are compiled in the same build. Consider the following directory layout:
./foo/ <= contains foo.ko ./bar/ <= contains bar.koThe top-level kbuild file would then look like:
#./Kbuild (or ./Makefile): obj-m := foo/ bar/And executing:
$ make -C $KDIR M=$PWDwill then do the expected and compile both modules with full knowledge of symbols from either module.
- Use an extra Module.symvers file
- When an external module is built, a Module.symvers file is generated containing all exported symbols which are not defined in the kernel. To get access to symbols from bar.ko, copy the Module.symvers file from the compilation of bar.ko to the directory where foo.ko is built. During the module build, kbuild will read the Module.symvers file in the directory of the external module, and when the build is finished, a new Module.symvers file is created containing the sum of all symbols defined and not part of the kernel.
- Use "make" variable KBUILD_EXTRA_SYMBOLS
- If it is impractical to add a top-level kbuild file, you can assign a space separated list of files to KBUILD_EXTRA_SYMBOLS in your build file. These files will be loaded by modpost during the initialization of its symbol tables.
Modules often need to check for certain CONFIG_ options to decide if a specific feature is included in the module. In kbuild this is done by referencing the CONFIG_ variable directly:
#fs/ext2/Makefile obj-$(CONFIG_EXT2_FS) += ext2.o ext2-y := balloc.o bitmap.o dir.o ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.oExternal modules have traditionally used "grep" to check for specific CONFIG_ settings directly in .config. This usage is broken. As introduced before, external modules should use kbuild for building and can therefore use the same methods as in-tree modules when testing for CONFIG_ definitions.