From 8aa33ec2f4812d1ee96f4c02ba013f5b9c514343 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 25 Aug 2017 20:34:35 +0200 Subject: [PATCH 1/4] dt-bindings: net: Revert sun8i dwmac binding This binding still doesn't please everyone, and we're getting far too close from the release to allow it to reach a stable version. Let's remove it until the discussion settles down. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- .../devicetree/bindings/net/dwmac-sun8i.txt | 84 ------------------- 1 file changed, 84 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt deleted file mode 100644 index 725f3b18788614..00000000000000 --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt +++ /dev/null @@ -1,84 +0,0 @@ -* Allwinner sun8i GMAC ethernet controller - -This device is a platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -Required properties: -- compatible: should be one of the following string: - "allwinner,sun8i-a83t-emac" - "allwinner,sun8i-h3-emac" - "allwinner,sun8i-v3s-emac" - "allwinner,sun50i-a64-emac" -- reg: address and length of the register for the device. -- interrupts: interrupt for the device -- interrupt-names: should be "macirq" -- clocks: A phandle to the reference clock for this device -- clock-names: should be "stmmaceth" -- resets: A phandle to the reset control for this device -- reset-names: should be "stmmaceth" -- phy-mode: See ethernet.txt -- phy-handle: See ethernet.txt -- #address-cells: shall be 1 -- #size-cells: shall be 0 -- syscon: A phandle to the syscon of the SoC with one of the following - compatible string: - - allwinner,sun8i-h3-system-controller - - allwinner,sun8i-v3s-system-controller - - allwinner,sun50i-a64-system-controller - - allwinner,sun8i-a83t-system-controller - -Optional properties: -- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0) -- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0) -Both delay properties need to be a multiple of 100. They control the delay for -external PHY. - -Optional properties for the following compatibles: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": -- allwinner,leds-active-low: EPHY LEDs are active low - -Required child node of emac: -- mdio bus node: should be named mdio - -Required properties of the mdio node: -- #address-cells: shall be 1 -- #size-cells: shall be 0 - -The device node referenced by "phy" or "phy-handle" should be a child node -of the mdio node. See phy.txt for the generic PHY bindings. - -Required properties of the phy node with the following compatibles: - - "allwinner,sun8i-h3-emac", - - "allwinner,sun8i-v3s-emac": -- clocks: a phandle to the reference clock for the EPHY -- resets: a phandle to the reset control for the EPHY - -Example: - -emac: ethernet@1c0b000 { - compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c0b000 0x104>; - interrupts = ; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; - - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - int_mii_phy: ethernet-phy@1 { - reg = <1>; - clocks = <&ccu CLK_BUS_EPHY>; - resets = <&ccu RST_BUS_EPHY>; - }; - }; -}; From 87e1f5e8bb4bd584de0a8f3b1e42196dca221d02 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 25 Aug 2017 20:36:48 +0200 Subject: [PATCH 2/4] arm64: dts: allwinner: Revert EMAC changes Since the discussion is not settled yet for the EMAC, and that the release in getting really close, let's revert the changes for now, and we'll reintroduce them later. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 16 --------------- .../dts/allwinner/sun50i-a64-pine64-plus.dts | 15 -------------- .../boot/dts/allwinner/sun50i-a64-pine64.dts | 17 ---------------- .../allwinner/sun50i-a64-sopine-baseboard.dts | 16 --------------- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 20 ------------------- .../dts/allwinner/sun50i-h5-nanopi-neo2.dts | 17 ---------------- .../dts/allwinner/sun50i-h5-orangepi-pc2.dts | 17 ---------------- .../allwinner/sun50i-h5-orangepi-prime.dts | 17 ---------------- 8 files changed, 135 deletions(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index ba2fde2909f949..6872135d7f849b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -51,7 +51,6 @@ compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64"; aliases { - ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; }; @@ -68,14 +67,6 @@ }; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; - phy-handle = <&ext_rgmii_phy>; - status = "okay"; -}; - &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -86,13 +77,6 @@ bias-pull-up; }; -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts index 24f1aac366d643..f82ccf332c0fac 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts @@ -48,18 +48,3 @@ /* TODO: Camera, touchscreen, etc. */ }; - -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; - phy-handle = <&ext_rgmii_phy>; - status = "okay"; -}; - -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 827168bc22ed2c..7c533b6d4ba9ab 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -51,7 +51,6 @@ compatible = "pine64,pine64", "allwinner,sun50i-a64"; aliases { - ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -79,15 +78,6 @@ status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&rmii_pins>; - phy-mode = "rmii"; - phy-handle = <&ext_rmii_phy1>; - status = "okay"; - -}; - &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -98,13 +88,6 @@ bias-pull-up; }; -&mdio { - ext_rmii_phy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 216e3a5dafaef8..d891a1a27f6c56 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -53,7 +53,6 @@ "allwinner,sun50i-a64"; aliases { - ethernet0 = &emac; serial0 = &uart0; }; @@ -77,21 +76,6 @@ status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; - phy-handle = <&ext_rgmii_phy>; - status = "okay"; -}; - -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index bd0f33b77f5728..68aadc9b96dc1e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -449,26 +449,6 @@ #size-cells = <0>; }; - emac: ethernet@1c30000 { - compatible = "allwinner,sun50i-a64-emac"; - syscon = <&syscon>; - reg = <0x01c30000 0x10000>; - interrupts = ; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index 9689087611945f..1c2387bd5df6f1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -50,7 +50,6 @@ compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5"; aliases { - ethernet0 = &emac; serial0 = &uart0; }; @@ -109,22 +108,6 @@ status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_rgmii_pins>; - phy-supply = <®_gmac_3v3>; - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&mdio { - ext_rgmii_phy: ethernet-phy@7 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <7>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index a8296feee88411..4f77c8470f6c33 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -59,7 +59,6 @@ }; aliases { - ethernet0 = &emac; serial0 = &uart0; }; @@ -137,28 +136,12 @@ status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_rgmii_pins>; - phy-supply = <®_gmac_3v3>; - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - status = "okay"; -}; - &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; status = "okay"; }; -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index d906b302cbcdc9..6be06873e5afe5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -54,7 +54,6 @@ compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5"; aliases { - ethernet0 = &emac; serial0 = &uart0; }; @@ -144,28 +143,12 @@ status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_rgmii_pins>; - phy-supply = <®_gmac_3v3>; - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - status = "okay"; -}; - &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; status = "okay"; }; -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; From fe45174b72aead678da581bab9e9a37c9b26a070 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 25 Aug 2017 20:36:48 +0200 Subject: [PATCH 3/4] arm: dts: sunxi: Revert EMAC changes Since the discussion is not settled yet for the EMAC, and that the release in getting really close, let's revert the changes for now, and we'll reintroduce them later. Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- .../boot/dts/sun8i-h2-plus-orangepi-zero.dts | 9 ------- .../boot/dts/sun8i-h3-bananapi-m2-plus.dts | 19 -------------- arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 7 ----- arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 ------ arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 8 ------ .../boot/dts/sun8i-h3-orangepi-pc-plus.dts | 5 ---- arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 8 ------ arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 22 ---------------- .../arm/boot/dts/sun8i-h3-orangepi-plus2e.dts | 16 ------------ arch/arm/boot/dts/sunxi-h3-h5.dtsi | 26 ------------------- 10 files changed, 128 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts index 6713d0f2b3f4d3..b1502df7b50923 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts @@ -56,8 +56,6 @@ aliases { serial0 = &uart0; - /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ - ethernet0 = &emac; ethernet1 = &xr819; }; @@ -104,13 +102,6 @@ status = "okay"; }; -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - status = "okay"; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index d756ff82511602..a337af1de32246 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -52,7 +52,6 @@ compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; aliases { - ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; }; @@ -115,30 +114,12 @@ status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_rgmii_pins>; - phy-supply = <®_gmac_3v3>; - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - - allwinner,leds-active-low; - status = "okay"; -}; - &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; status = "okay"; }; -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts index 78f6c24952dd12..8d2cc6e9a03faf 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts @@ -46,10 +46,3 @@ model = "FriendlyARM NanoPi NEO"; compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; }; - -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index 17cdeae19c6f0f..8ff71b1bb45b1c 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -54,7 +54,6 @@ aliases { serial0 = &uart0; /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ - ethernet0 = &emac; ethernet1 = &rtl8189; }; @@ -118,13 +117,6 @@ status = "okay"; }; -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - status = "okay"; -}; - &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 6880268e8b87b0..5fea430e0eb100 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -52,7 +52,6 @@ compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3"; aliases { - ethernet0 = &emac; serial0 = &uart0; }; @@ -98,13 +97,6 @@ status = "okay"; }; -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - status = "okay"; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index a10281b455f50c..8b93f5c781a70b 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -53,11 +53,6 @@ }; }; -&emac { - /* LEDs changed to active high on the plus */ - /delete-property/ allwinner,leds-active-low; -}; - &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 998b60f8d295e8..1a044b17d6c61e 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -52,7 +52,6 @@ compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3"; aliases { - ethernet0 = &emac; serial0 = &uart0; }; @@ -114,13 +113,6 @@ status = "okay"; }; -&emac { - phy-handle = <&int_mii_phy>; - phy-mode = "mii"; - allwinner,leds-active-low; - status = "okay"; -}; - &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index 331ed683ac62cb..828ae7a526d924 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -47,10 +47,6 @@ model = "Xunlong Orange Pi Plus / Plus 2"; compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; - aliases { - ethernet0 = &emac; - }; - reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; regulator-name = "gmac-3v3"; @@ -78,24 +74,6 @@ status = "okay"; }; -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_rgmii_pins>; - phy-supply = <®_gmac_3v3>; - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - - allwinner,leds-active-low; - status = "okay"; -}; - -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; -}; - &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts index 80026f3caafc89..97920b12a94452 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts @@ -61,19 +61,3 @@ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ }; }; - -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_rgmii_pins>; - phy-supply = <®_gmac_3v3>; - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index d38282b9e5d442..11240a8313c266 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -391,32 +391,6 @@ clocks = <&osc24M>; }; - emac: ethernet@1c30000 { - compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c30000 0x10000>; - interrupts = ; - interrupt-names = "macirq"; - resets = <&ccu RST_BUS_EMAC>; - reset-names = "stmmaceth"; - clocks = <&ccu CLK_BUS_EMAC>; - clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - mdio: mdio { - #address-cells = <1>; - #size-cells = <0>; - int_mii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - clocks = <&ccu CLK_BUS_EPHY>; - resets = <&ccu RST_BUS_EPHY>; - }; - }; - }; - spi0: spi@01c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; From a0ac89b57207ccc87d76f4e6aa9a83026743861b Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 30 Aug 2017 12:15:37 +0200 Subject: [PATCH 4/4] arm64: dts: marvell: fix number of GPIOs in Armada AP806 description The Armada AP806 has 20 pins, and therefore 20 GPIOs (from 0 to 19 included) and not 19 pins. Therefore, we fix the Device Tree description for the GPIO controller. Before this patch: $ cat /sys/kernel/debug/pinctrl/f06f4000.system-controller:pinctrl/gpio-ranges GPIO ranges handled: 0: mvebu-gpio GPIOS [0 - 19] PINS [0 - 19] 0: f06f4000.system-controller:gpio GPIOS [0 - 18] PINS [0 - 18] After this patch: $ cat /sys/kernel/debug/pinctrl/f06f4000.system-controller:pinctrl/gpio-ranges GPIO ranges handled: 0: mvebu-gpio GPIOS [0 - 19] PINS [0 - 19] 0: f06f4000.system-controller:gpio GPIOS [0 - 19] PINS [0 - 19] Fixes: 63dac0f4924b9 ("arm64: dts: marvell: add gpio support for Armada 7K/8K") Signed-off-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 1eb1f1e9aac4cf..4d360713ed1245 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -268,10 +268,10 @@ ap_gpio: gpio { compatible = "marvell,armada-8k-gpio"; offset = <0x1040>; - ngpios = <19>; + ngpios = <20>; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&ap_pinctrl 0 0 19>; + gpio-ranges = <&ap_pinctrl 0 0 20>; }; }; };