Raw advertising messages for aliexpress dc fan controller.

[fama-lama]

hi i just wanted to info dump the codes i extracted from a no name dc fan controller on aliexpress. Hope this helps someone.
The associated app is called 'HF Smart Plus'

light on
02.01.1A.1B.03.48.46.4B.4A.1C.49.17.E7.6E.B7.E1.6B.93.85.03.15.20.E4.8B.44.10.11.12.13.14.15
light off
02.01.1A.1B.03.48.46.4B.4A.7B.ED.B1.4E.CF.58.82.C8.36.E1.76.B8.BE.80.2A.76.10.11.12.13.14.15
fan on
02.01.1A.1B.03.48.46.4B.4A.69.F9.BD.3C.E1.6A.94.2B.48.60.55.19.3B.01.26.20.10.11.12.13.14.15
fan off
02.01.1A.1B.03.48.46.4B.4A.07.78.3C.C2.43.CC.F6.AF.AA.93.B5.D7.0C.A6.C4.0E.10.11.12.13.14.15
fan speed 0
02.01.1A.1B.03.48.46.4B.4A.78.FD.C3.4B.D2.5B.85.3C.37.43.61.55.5A.3E.C6.09.10.11.12.13.14.15
fan speed 1
02.01.1A.1B.03.48.46.4B.4A.1C.58.1E.E7.6E.B7.E1.96.93.26.85.93.77.53.E1.BD.10.11.12.13.14.15
fan speed 2
02.01.1A.1B.03.48.46.4B.4A.7B.FC.C0.4E.CF.58.82.3D.36.29.2F.77.76.58.E9.87.10.11.12.13.14.15
fan speed 3
02.01.1A.1B.03.48.46.4B.4A.E4.9E.64.1F.A6.EF.19.4E.CB.63.3E.CA.3A.96.93.E3.10.11.12.13.14.15
fan speed 4
02.01.1A.1B.03.48.46.4B.4A.69.E8.B0.3C.E1.6A.94.2B.48.CF.D7.A7.D0.92.7D.01.10.11.12.13.14.15
fan speed 5
02.01.1A.1B.03.48.46.4B.4A.51.11.D5.94.39.82.AC.C3.60.E0.B5.4B.BB.B1.24.2E.10.11.12.13.14.15
fan speed 6
02.01.1A.1B.03.48.46.4B.4A.99.D6.9E.6C.F1.3A.64.1B.18.70.16.2C.2B.F1.D3.FB.10.11.12.13.14.15
fan natural wind
02.01.1A.1B.03.48.46.4B.4A.9E.DC.A2.69.EC.35.5F.10.11.CB.D2.F1.D6.BE.C6.82.10.11.12.13.14.15
fan reverse
02.01.1A.1B.03.48.46.4B.4A.78.CA.90.4B.D2.5B.85.33.37.26.7F.52.77.5B.E2.98.10.11.12.13.14.15
fan forward
02.01.1A.1B.03.48.46.4B.4A.1C.67.2D.E7.6E.B7.E1.90.93.2B.57.8D.72.5E.18.58.10.11.12.13.14.15

[fama-lama]

remarks:

1. both light command only toggles the light and doesnt respect the state of light. (sending light off command twice will turn off and on the light)
2. turning off the fan will reset the fan to forward mode.
3. the controller has terrible start up torque and will timeout the action after ~10 sec if the fan doesnt start spinning. Workaround i did was the turn on automation cycle the fan on and off every 30 sec for 2 minutes.