Choosing a provider (that you trust), Vultr, Greenhost, OVH, Hetzner, Linode, Cockbox (make sure the host allows post 25 to be used, some providers block it).
With Vultr you may need to open a support ticket and request for them to unblock port 25.
Before starting you will want to check the IP of your new server to make sure it is not on any blacklists - https://multirbl.valli.org/lookup/
If it is, destroy it and deploy a new one. You might notice that some providers such as Vultr have entire ranges of IPs listed.
You should have a fresh 20.04 Ubuntu server (or 18.04). I'm assuming that you have taken proper steps to secure the server (no root login, key auth only, 2FA, automatic security updates etc.).
Add Fail2ban, a Firewall (e.g UFW), make sure that ports 25, 22 (or whatever your SSH port is if you've changed it) 443 and 80 are open.
A good place to get started - https://github.com/imthenachoman/How-To-Secure-A-Linux-Server
https://plusbryan.com/my-first-5-minutes-on-a-server-or-essential-security-for-linux-servers
I will be running all commands as a sudo user called johndoe. The domain used will be example.com and the hostname mail.example.com. I'll be using Vultr for this example (Note: if you also use Vultr for managing DNS records they do not currently support TSLA records required for DANE).
To check your server's hostname run:
hostname -fIf your hostname is not what it should be update it by running:
sudo hostnamectl set-hostname mail.example.comMaking sure to replace mail.example.com with your own domain.
Now let's add some basic DNS records.
We'll start with the MX record. This tells email sent to your domain where it should go.
MX @ mail.example.com
We want to direct it to our server's fully qualifed domain name (FQDN). Give it a priority of 10 (or just make sure it has the lowest priority if you have other MX records).
If you want to be able to also use wildcard subdomains e.g. ([email protected]) then you also need to add a wildcard MX record:
MX * mail.example.com
This will tell email sent to any subdomain of example.com to go to the same place.
Add a wildcard A and AAAA (if using IPv6) record too if you want to use all subdomains (or just an A record for unsubscribe.example.com if not).
A * <Your-IPv4-address>
AAAA * <Your-IPv4-address>
If you want to just use the example.com domain and not bother with subdomains then you can skip the wildcard MX, A, AAAA records above (you will still need to add MX and A/AAAA for unsubscribe.example.com though to handle deactivating aliases).
Next we will add an explicit A record for the hostname mail.example.com and for where the web app will be located app.example.com
A mail.example.com <Your-IPv4-address>
A app.example.com <Your-IPv4-address>
If you are using IPv6 then you will also need to add an AAAA record
AAAA mail.example.com <Your-IPv6-address>
AAAA app.example.com <Your-IPv6-address>
Make sure to replace the placeholders above with the actual IP address of your server.
Now we need to set up the correct PTR record for reverse DNS lookups. This needs to be set as your FQDN (fully qualified domain name) which in our case is mail.example.com.
On your server run host <Your-IPv4-address> to check what it is.
You will likely need to login to your hosting provider to update your PTR record.
In Vultr you can update your reverse DNS by clicking on your server, then going to the settings tab, then IPv4 and click on the value in the "Reverse DNS" column.
Change it to mail.example.com. Don't forget to update this for IPv6 if you are using it too.
You can check that it is set correctly by entering your IPv4 and IPv6 addresses here https://mxtoolbox.com/ReverseLookup.aspx.
Now we're going to install our MTA (mail transfer agent) Postfix.
sudo apt update
sudo apt install postfixFor configuration type select "Internet Site".
For System mail name: enter "example.com" note the missing mail subdomain.
Postfix should now begin installing.
If you would like to check the version of Postfix that you are running you can do:
sudo postconf mail_versionAt the time of writing this I am running mail_version = 3.4.13.
We'll install an extension we will need later so that Postfix can query our database.
sudo apt install postfix-mysqlNow let's update our Postfix config file. A lot of the items in this file don't exist yet, but don't worry, we'll create them soon.
sudo vim /etc/postfix/main.cfOr use nano if you like.
Replace the file contents with the following (replacing example.com with your own domain):
smtpd_banner = $myhostname ESMTP
biff = no
# appending .domain is the MUA's job.
append_dot_mydomain = no
readme_directory = no
# See http://www.postfix.org/COMPATIBILITY_README.html -- default to 2 on
# fresh installs.
compatibility_level = 2
# SMTPD
smtpd_tls_cert_file=/etc/nginx/conf.d/example.com.d/server.crt
smtpd_tls_key_file=/etc/nginx/conf.d/example.com.d/server.key
smtpd_use_tls=yes
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtpd_tls_CApath = /etc/ssl/certs
smtpd_tls_security_level = may
smtpd_tls_protocols = !SSLv2, !SSLv3, !TLSv1
smtpd_tls_loglevel = 1
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtpd_tls_mandatory_exclude_ciphers = MD5, DES, ADH, RC4, PSD, SRP, 3DES, eNULL, aNULL
smtpd_tls_exclude_ciphers = MD5, DES, ADH, RC4, PSD, SRP, 3DES, eNULL, aNULL
smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3, !TLSv1
smtpd_tls_mandatory_ciphers = high
smtpd_tls_ciphers = high
smtpd_tls_eecdh_grade = ultra
tls_high_cipherlist=EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+RC4:EECDH:EDH+aRSA:RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS
tls_preempt_cipherlist = yes
tls_ssl_options = NO_COMPRESSION
# SMTP
smtp_tls_CApath = /etc/ssl/certs
smtp_use_tls=yes
smtp_tls_loglevel = 1
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
smtp_tls_mandatory_protocols = !SSLv2, !SSLv3, !TLSv1
smtp_tls_protocols = !SSLv2, !SSLv3, !TLSv1
smtp_tls_mandatory_ciphers = high
smtp_tls_ciphers = high
smtp_tls_mandatory_exclude_ciphers = MD5, DES, ADH, RC4, PSD, SRP, 3DES, eNULL, aNULL
smtp_tls_exclude_ciphers = MD5, DES, ADH, RC4, PSD, SRP, 3DES, eNULL, aNULL
smtp_tls_security_level = may
smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination
myhostname = mail.example.com
mydomain = example.com
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
mydestination = localhost.$mydomain, localhost
virtual_transport = anonaddy:
virtual_mailbox_domains = $mydomain, unsubscribe.$mydomain, mysql:/etc/postfix/mysql-virtual-alias-domains-and-subdomains.cf
relayhost =
mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
inet_protocols = all
local_recipient_maps =
smtpd_helo_required = yes
smtpd_helo_restrictions =
permit_mynetworks
permit_sasl_authenticated
reject_invalid_helo_hostname
reject_non_fqdn_helo_hostname
reject_unknown_helo_hostname
smtpd_sender_restrictions =
permit_mynetworks
permit_sasl_authenticated
reject_non_fqdn_sender
reject_unknown_sender_domain
reject_unknown_reverse_client_hostname
policyd-spf_time_limit = 3600
smtpd_recipient_restrictions =
permit_mynetworks,
reject_unauth_destination,
check_recipient_access mysql:/etc/postfix/mysql-recipient-access.cf,
check_policy_service unix:private/policyd-spf
reject_rhsbl_helo dbl.spamhaus.org,
reject_rhsbl_reverse_client dbl.spamhaus.org,
reject_rhsbl_sender dbl.spamhaus.org,
reject_rbl_client zen.spamhaus.org
reject_rbl_client dul.dnsbl.sorbs.net
# Block clients that speak too early.
smtpd_data_restrictions = reject_unauth_pipelining
# Milter configuration
milter_default_action = accept
milter_protocol = 6
smtpd_milters = local:opendkim/opendkim.sock,local:opendmarc/opendmarc.sock
non_smtpd_milters = $smtpd_milters
disable_vrfy_command = yes
strict_rfc821_envelopes = yes
Make sure your hostname is correct in the Postfix config file.
sudo postconf myhostnameYou'll see warnings that the mysql-... files do not exist. You should see mail.example.com if you don't edit /etc/postfix/main.cf and update the myhostname value.
Open up /etc/postfix/master.cf and update this line at the top of the file:
smtp inet n - - - - smtpd
-o content_filter=anonaddy:dummy
This should be the only line for smtp.
Then add these lines to the bottom of the file:
anonaddy unix - n n - - pipe
flags=F user=johndoe argv=php /var/www/anonaddy/artisan anonaddy:receive-email --sender=${sender} --recipient=${recipient} --local_part=${user} --extension=${extension} --domain=${domain} --size=${size}
Making sure to replace johndoe with the username of the user who will run the artisan command and also to update the /path to wherever you plan to place the web app installation. For this tutorial I'm going to use the location /var/www/anonaddy.
This command will pipe the email through to our applicaton so that we can determine who the alias belongs to and who to forward the email to.
On Ubuntu 20.04 Nginx is included in the default repositories so we can simply run:
sudo apt update
sudo apt install nginx
sudo nginx -vIf you're on Ubuntu 18.04 you will need to add the following signing key and repo.
Import the nginx signing key and the repository.
sudo apt-key adv --fetch-keys 'https://nginx.org/keys/nginx_signing.key'
sudo sh -c "echo 'deb https://nginx.org/packages/mainline/ubuntu/ '$(lsb_release -cs)' nginx' > /etc/apt/sources.list.d/Nginx.list"Then you can Install and check the version.
sudo apt update
sudo apt install nginx
sudo nginx -vAt the time of writing this I have nginx version: nginx/1.18.0.
Create the directory for where the application will be stored.
sudo mkdir -p /var/www/
sudo chown -R $USER:$USER /var/www/
sudo chmod -R 755 /var/www/First we'll generate a stronger DHE parameter for Nginx by running:
sudo mkdir /etc/nginx/ssl
sudo openssl dhparam -out /etc/nginx/ssl/dhparam.pem 4096The above command will take quite some time, so go grab a cup of tea/coffee!
Next create the Nginx server block:
sudo mkdir /etc/nginx/conf.d/example.com.d
sudo nano /etc/nginx/conf.d/example.com.confAdd the following inside
server {
listen 80;
listen [::]:80;
server_name app.example.com;
return 301 https://$server_name$request_uri;
}
server {
listen 443 ssl http2;
listen [::]:443 ssl http2;
server_name app.example.com;
root /var/www/anonaddy/public;
server_tokens off;
add_header X-Frame-Options "SAMEORIGIN";
add_header X-XSS-Protection "1; mode=block";
add_header X-Content-Type-Options "nosniff";
add_header Strict-Transport-Security "max-age=63072000; includeSubDomains; preload";
add_header Content-Security-Policy "default-src 'self'; script-src 'self' 'unsafe-inline' 'unsafe-eval'; img-src 'self' data:; style-src 'self' 'unsafe-inline'; font-src 'self'; object-src 'none'";
add_header Referrer-Policy "origin-when-cross-origin";
add_header Expect-CT "enforce, max-age=604800";
index index.html index.htm index.php;
charset utf-8;
ssl_certificate /etc/nginx/conf.d/example.com.d/server.crt;
ssl_certificate_key /etc/nginx/conf.d/example.com.d/server.key;
ssl_trusted_certificate /root/.acme.sh/example.com/fullchain.cer;
ssl_prefer_server_ciphers on;
ssl_session_timeout 5m;
ssl_protocols TLSv1.2 TLSv1.3;
ssl_stapling on;
ssl_stapling_verify on;
ssl_ciphers "ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384";
ssl_ecdh_curve secp384r1;
ssl_session_cache shared:SSL:10m;
ssl_session_tickets off;
ssl_dhparam /etc/nginx/ssl/dhparam.pem;
location / {
try_files $uri $uri/ /index.php?$query_string;
}
location = /favicon.ico { access_log off; log_not_found off; }
location = /robots.txt { access_log off; log_not_found off; }
error_page 404 /index.php;
location ~ \.php$ {
fastcgi_pass unix:/var/run/php/php7.4-fpm.sock;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $realpath_root$fastcgi_script_name;
include fastcgi_params;
}
location ~ /\.(?!well-known).* {
deny all;
}
}
sudo nano /etc/nginx/nginx.confChange the user to johndoe.
We won't restart nginx yet because it won't be able to find the SSL certificates and will throw an error.
We're going to install the latest version of PHP at the time of writing this - version 7.4
If you are using Ubuntu 18.04 you will need to add the below repository, Ubuntu 20.04 can skip this step.
sudo apt install software-properties-common
sudo add-apt-repository ppa:ondrej/php
sudo apt updateInstall PHP7.4 and check the version.
sudo apt install php7.4-fpm
php-fpm7.4 -vInstall some required extensions:
sudo apt install php7.4-common php7.4-mysql php7.4-dev php7.4-mbstring php7.4-gd php7.4-imagick php7.4-opcache php7.4-soap php7.4-zip php7.4-cli php7.4-curl php-mailparse php-gnupg php-redis -ysudo nano /etc/php/7.4/fpm/pool.d/www.confuser = johndoe
group = johndoe
listen.owner = johndoe
listen.group = johndoe
Then restart php7.4-fpm by running:
sudo service php7.4-fpm restartNow we need to get an SSL certificate using Acme.sh.
We again need to switch to the root user to run these commands:
sudo suDownload the install script from GitHub and run it.
cd ~
git clone https://github.com/acmesh-official/acme.sh.git
cd ./acme.sh
./acme.sh --installYou should set up automatic DNS API integration for wildcard certs if you are using them, this will allow automatic renewal of your certificates.
https://github.com/acmesh-official/acme.sh#8-automatic-dns-api-integration
For example, instructions for Vultr are here - https://github.com/acmesh-official/acme.sh/wiki/dnsapi#82-use-vultr-dns-api-to-automatically-issue-cert
I would run:
export VULTR_API_KEY="<Your API key>"To install the certificate run:
./acme.sh --issue -d example.com -d '*.example.com' --dns dns_vultr \
--keylength 4096 \
--key-file /etc/nginx/conf.d/example.com.d/server.key \
--fullchain-file /etc/nginx/conf.d/example.com.d/server.crt \
--reloadcmd "service nginx force-reload"Make sure to change example.com to your domain.
You can now type exit to go back to the johndoe user instead of root.
Follow the instructions in the linked blog post at the end of this section on how to install OpenDKIM and then add an SPF record.
The only differences are the following couple of points:
Canonicalization simple
Mode sv
SubDomains yes
Also when editing /etc/opendkim/signing.table add this line too so that emails from subdomain aliases will also be signed.
*@*.example.com default._domainkey.example.com
https://www.linuxbabe.com/mail-server/setting-up-dkim-and-spf
Once you've finished following the above post you should have SPF and DKIM set up for your domain.
Next follow this blog post on how to install OpenDMARC.
https://www.linuxbabe.com/mail-server/opendmarc-postfix-ubuntu
Next add a new TXT record to your domain for DMARC with a host of _dmarc and value:
"v=DMARC1; p=none; sp=none; adkim=r; aspf=r; pct=100;"
For further reading about DMARC records and the different options available see - https://www.linuxbabe.com/mail-server/create-dmarc-record
You should now have a valid DMARC record for your domain.
At the time of writing this the latest stable release is v10.5. Make sure to check for any newer releases.
Follow the instructions on this link to install MariaDB (make sure to change to 18.04 if you are using it):
Make sure it is running correctly and check the version
sudo systemctl status mariadb
sudo mysql -VAt the time of writing this I am using "Ver 15.1 Distrib 10.5.6-MariaDB"
Set a secure MySQL root password by running the command below and make a note of it somewhere e.g. password manager.
Answer no for "Switch to unix_socket authentication" and no for "Change the root password?" as you have already set it in the first step. Answer yes (default) to the other questions.
sudo mysql_secure_installationNext we're going to create the database and also a user with correct permissions.
sudo mysql -u root -pOnce in the MariaDB shell create a new database called anonaddy_database (or whatever you like)
CREATE DATABASE anonaddy_database;Then create a new user and give them a strong password (replace below)
CREATE USER 'anonaddy'@'localhost' IDENTIFIED BY 'STRONG-PASSWORD-HERE';Grant the user privileges for the new database.
GRANT ALL PRIVILEGES ON anonaddy_database.* TO 'anonaddy'@'localhost' WITH GRANT OPTION;Next flush privileges and exit the MariaDB shell.
FLUSH PRIVILEGES;
exitCreate a new file /etc/postfix/mysql-virtual-alias-domains-and-subdomains.cf and enter the following inside:
user = anonaddy
password = your-database-password
hosts = 127.0.0.1
dbname = anonaddy_database
query = SELECT (SELECT 1 FROM users WHERE '%s' IN (CONCAT(username, '.example.com'))) AS users, (SELECT 1 FROM additional_usernames WHERE '%s' IN (CONCAT(additional_usernames.username, '.example.com'))) AS usernames, (SELECT 1 FROM domains WHERE domains.domain = '%s' AND domains.domain_verified_at IS NOT NULL) AS domains LIMIT 1;If you need to add multiple domains then just update the above query to:
query = SELECT (SELECT 1 FROM users WHERE '%s' IN (CONCAT(username, '.example.com'),CONCAT(username, '.example2.com'))) AS users, (SELECT 1 FROM additional_usernames WHERE '%s' IN (CONCAT(additional_usernames.username, '.example.com'),CONCAT(additional_usernames.username, '.example2.com'))) AS usernames, (SELECT 1 FROM domains WHERE domains.domain = '%s' AND domains.domain_verified_at IS NOT NULL) AS domains LIMIT 1;This file is responsible for determining whether the server should accept email for a certain domain/subdomain. If no results are found from the query then the email will not be accepted.
The reason these SQL queries are not all nicely formatted is because they have to be on one line.
Next create another new file /etc/postfix/mysql-recipient-access.cf and enter the following inside:
user = anonaddy
password = your-database-password
hosts = 127.0.0.1
dbname = anonaddy_database
query = CALL check_access('%s')This file is responsible for checking first whether an alias exists, and if so has it been deactivated or deleted. If it has been deactivated or deleted then return 'DISCARD' or 'REJECT'.
If the alias has not been deactivated or deleted or it does not exist then it also checks whether the alias is for a user, additional username or custom domain and if so, is that additional username or custom domain set as active. If it is not set as active then the email is discarded. It also checks if the user, additional usename or custom domain has catch-all enabled, and if not and the alias does not already exist then the email is rejected.
The reason we're using a stored procedure here is so that we can run multiple queries and use IF statements.
Either from the command line (sudo mysql -u root -p) or from an SQL client, run the following code to create the stored procedure.
If you have any issues creating the stored procedure, make sure you have set appropriate permissions for your database user.
DELIMITER $$
USE `anonaddy_database`$$
DROP PROCEDURE IF EXISTS `check_access`$$
CREATE DEFINER=`anonaddy`@`localhost` PROCEDURE `check_access`(alias_email VARCHAR(254) charset utf8)
BEGIN
DECLARE no_alias_exists int(1);
DECLARE alias_action varchar(7) charset utf8;
DECLARE username_action varchar(7) charset utf8;
DECLARE additional_username_action varchar(7) charset utf8;
DECLARE domain_action varchar(7) charset utf8;
DECLARE alias_domain varchar(254) charset utf8;
SET alias_domain = SUBSTRING_INDEX(alias_email, '@', -1);
# We only want to carry out the checks if it is a full RCPT TO address without any + extension
IF LOCATE('+',alias_email) = 0 THEN
SET no_alias_exists = CASE WHEN NOT EXISTS(SELECT NULL FROM aliases WHERE email = alias_email) THEN 1 ELSE 0 END;
# If there is an alias, check if it is deactivated or deleted
IF NOT no_alias_exists THEN
SET alias_action = (SELECT
IF(deleted_at IS NULL,
'DISCARD',
'REJECT')
FROM
aliases
WHERE
email = alias_email
AND (active = 0
OR deleted_at IS NOT NULL));
END IF;
# If the alias is deactivated or deleted then increment its blocked count and return the alias_action
IF alias_action IN('DISCARD','REJECT') THEN
UPDATE
aliases
SET
emails_blocked = emails_blocked + 1
WHERE
email = alias_email;
SELECT alias_action;
ELSE
SELECT
(
SELECT
CASE
WHEN no_alias_exists
AND catch_all = 0 THEN "REJECT"
ELSE NULL
END
FROM
users
WHERE
alias_domain IN ( CONCAT(username, '.example.com')) ),
(
SELECT
CASE
WHEN no_alias_exists
AND catch_all = 0 THEN "REJECT"
WHEN active = 0 THEN "DISCARD"
ELSE NULL
END
FROM
additional_usernames
WHERE
alias_domain IN ( CONCAT(username, '.example.com')) ),
(
SELECT
CASE
WHEN no_alias_exists
AND catch_all = 0 THEN "REJECT"
WHEN active = 0 THEN "DISCARD"
ELSE NULL
END
FROM
domains
WHERE
domain = alias_domain) INTO username_action, additional_username_action, domain_action;
# If all actions are NULL then we can return 'DUNNO' which will prevent Postfix from trying substrings of the alias
IF username_action IS NULL AND additional_username_action IS NULL AND domain_action IS NULL THEN
SELECT 'DUNNO';
ELSEIF username_action IN('DISCARD','REJECT') THEN
SELECT username_action;
ELSEIF additional_username_action IN('DISCARD','REJECT') THEN
SELECT additional_username_action;
ELSE
SELECT domain_action;
END IF;
END IF;
ELSE
# This means the alias must have a + extension so we will ignore it
SELECT NULL;
END IF;
END$$
DELIMITER ;If you need to add multiple domains then just update both of the IN sections to:
IN (CONCAT(username, '.example.com'),CONCAT(username, '.example2.com'))You may be wondering why we have this line near the top of the procedure:
IF LOCATE('+',alias_email) = 0 THENThis is present because Postfix will pass multiple arguments (substrings of the alias) to this stored procedure for each incoming email.
From the Postfix docs for check_recipient_access:
"Search the specified access(5) database for the resolved RCPT TO address, domain, parent domains, or localpart@, and execute the corresponding action."
What this means is that if an email comes in for the alias - [email protected] then Postfix will run the stored procedure with the following arguments and order:
CALL check_access('[email protected]');
CALL check_access('[email protected]'); # We want it to stop the checks here which is why we return 'DUNNO'
CALL check_access('username.example.com');
CALL check_access('example.com');
CALL check_access('com');
CALL check_access('hello@');We only want the queries to be run for the RCPT TO address ([email protected]) without any + extension, which is what the check above does. It also prevents needless database queries being run by returning 'DUNNO' when it finds a match.
Update the permissions and the group of these files:
sudo chmod o= /etc/postfix/mysql-virtual-alias-domains-and-subdomains.cf /etc/postfix/mysql-recipient-access.cf
sudo chgrp postfix /etc/postfix/mysql-virtual-alias-domains-and-subdomains.cf /etc/postfix/mysql-recipient-access.cfMake a test call for the stored procedure as your database user to ensure everything is working as expected.
USE anonaddy_database;
CALL check_access('[email protected]');You will get an error stating "Table 'anonaddy_database.aliases' doesn't exist" as we have not yet migrated the database.
Follow this short post on Digital Ocean to install Redis.
https://www.digitalocean.com/community/tutorials/how-to-install-and-secure-redis-on-ubuntu-20-04
We'll be using Redis for queues, user limits, sessions and caching.
Next let's get the actual AnonAddy application from GitHub.
cd /var/www/
git clone https://github.com/anonaddy/anonaddy.git
cd /var/www/anonaddyMake sure composer is installed (composer -V), if not then goto - https://getcomposer.org/download/ for instructions.
You can add the following flags when running the composer-setup.php command to add it to your $PATH:
sudo php composer-setup.php --install-dir=/usr/local/bin --filename=composerBefore running the NVM install script below make sure that you have a ~/.bashrc file. If not create one by running touch ~/.bashrc so that the NVM installer can be added to your $PATH. Also create a ~/.bash_profile and add:
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fiMake sure node is installed (node -v) if not then install it using NVM - https://www.digitalocean.com/community/tutorials/how-to-install-node-js-on-ubuntu-20-04#option-3-%E2%80%94-installing-node-using-the-node-version-manager
At the time of writing this I'm using the latest LTS - v12.19.0
cd /var/www/anonaddy
composer install --prefer-dist --no-dev -o && npm install
npm run productionNext copy the .env.example file and update it with correct values (database password, app url, redis password etc.)
cp .env.example .env
nano .envMake sure to update the database settings, redis password and the AnonAddy variables. You can use Redis for queue, sessions and cache.
We'll set ANONADDY_SIGNING_KEY_FINGERPRINT shortly.
APP_KEY will be generted in the next step, this is used by Laravel for securely encrypting values.
For more information on Laravel configuration please visit - https://laravel.com/docs/8.x/installation#configuration
For the ANONADDY_DKIM_SIGNING_KEY you only need to fill in this variable if you plan to add any custom domains through the web application.
You can either use the same private DKIM signing key we generated earlier from this tutorial - https://www.linuxbabe.com/mail-server/setting-up-dkim-and-spf
Or you can generate a new private/public keypair and give your user johndoe ownership of the private key.
If you want to use the same key we already generated then you will need to add johndoe to the opendkim group by running:
sudo usermod -a -G opendkim johndoe
Make sure to also run sudo chmod g+r /etc/opendkim/keys/example.com/default.private so that your johndoe user has read permissions for the file.
You'll need to log out and back in again for the changes to take effect.
You can test it by running cat /etc/opendkim/keys/example.com/default.private as the johndoe user to see if it can be displayed.
Doing this will cause opendkim to show a warning in your mail.log like this:
default._domainkey.example.com: key data is not secure: /etc/opendkim/keys/example.com/default.private is in group <group-number> which has multiple users
If you'd like to suppress this warning then you can add RequireSafeKeys false to your /etc/opendkim.conf file and restart opendkim - sudo service opendkim restart.
Then update your .env file.
ANONADDY_DKIM_SIGNING_KEY=/etc/opendkim/keys/example.com/default.private
Then we will generate an app key, migrate the database, link the storage directory, restart the queue and install laravel passport.
php artisan key:generate
php artisan migrate
php artisan storage:link
php artisan config:cache
php artisan view:cache
php artisan route:cache
php artisan queue:restart
php artisan passport:installRunning passport:install will output details about a new personal access client, e.g.
Encryption keys generated successfully.
Personal access client created successfully.
Client ID: 1
Client secret: MlVp37PNqtN9efBTw2wuenjMnMIlDuKBWK3GZQoJ
Password grant client created successfully.
Client ID: 2
Client secret: ZTvhZCRZMdKUvmwqSmNAfWzAoaRatVWgbCVN2cR2You need to update your .env file and add the details for the personal access client:
PASSPORT_PERSONAL_ACCESS_CLIENT_ID=client-id-value
PASSPORT_PERSONAL_ACCESS_CLIENT_SECRET=unhashed-client-secret-value
So I would enter:
PASSPORT_PERSONAL_ACCESS_CLIENT_ID=1
PASSPORT_PERSONAL_ACCESS_CLIENT_SECRET=MlVp37PNqtN9efBTw2wuenjMnMIlDuKBWK3GZQoJ
More information can be found in the Laravel documentation for Passport - https://laravel.com/docs/8.x/passport
We will be using supervisor for keeping the Laravel queue worker alive.
sudo apt install supervisorCreate a new configuration file:
sudo nano /etc/supervisor/conf.d/anonaddy.confEnter the following inside (change user, command location and the number of processes if you need to):
[program:anonaddy]
process_name=%(program_name)s_%(process_num)02d
command=php /var/www/anonaddy/artisan queue:work redis --sleep=3 --tries=3
autostart=true
autorestart=true
user=johndoe
numprocs=8
redirect_stderr=true
stopwaitsecs=3600
Then run:
sudo supervisorctl reread
sudo supervisorctl update
sudo supervisorctl start anonaddy:*You should now be able to visit app.example.com if you've set the correct DNS records.
Register an account and start using it straight away!
You can disable user registration after you've created your account to prevent anyone else from signing up.
Just update the value of ANONADDY_ENABLE_REGISTRATION to false in your .env file (and then run php artisan config:cache to update).
If you are using encryption and want to sign your forwarded emails then you'll need to create a new GPG key pair.
A simple guide can be found here - https://www.linuxbabe.com/security/a-practical-guide-to-gpg-part-1-generate-your-keypair
You will need to generate a key pair without giving it a password because php-gnupg is not able to use keys that are password protected.
To find your key's fingerprint run:
gpg -kThe fingerprint is 40 characters long and looks like this 26A987650243B28802524E2F809FD0D502E2F695.
Then update the value of ANONADDY_SIGNING_KEY_FINGERPRINT= in your .env file to match the fingerprint of your key.
Then run php artisan config:cache to update.
The above steps are enough to get you set up and running with AnonAddy but if you'd like to take it further then keep reading.
We can use Spamassassin to reject spam emails arriving at our server.
sudo apt install spamassassin spamc
sudo systemctl enable spamassassin
sudo systemctl start spamassassinNext install the milter so that we can reject emails if they have a high spam score.
sudo apt install spamass-milterUpdate /etc/postfix/main.cf and add the milter to smtpd_milters.
# Milter configuration
milter_default_action = accept
milter_protocol = 6
smtpd_milters = local:opendkim/opendkim.sock,local:opendmarc/opendmarc.sock,local:spamass/spamass.sock
non_smtpd_milters = $smtpd_milters
You can change the score needed in order for an email to be rejected by editing /etc/default/spamass-milter.
# Reject emails with spamassassin scores > 15.
#OPTIONS="${OPTIONS} -r 15"
Just uncomment the OPTIONS line and change 15 to something else, for example 7.5
# Reject emails with spamassassin scores > 7.5.
OPTIONS="${OPTIONS} -r 7.5"
Next restart Spamassassin and Postfix
sudo systemctl restart postfix spamass-milterIf you want to test if Spamassasin is working then send an email with the content from this link in it.
https://spamassassin.apache.org/gtube/
It should be rejected with the message ERROR_CODE :550, ERROR_CODE :5.7.1 Blocked by SpamAssassin.
This is to speed up queries and to prevent you getting rate limited when querying DNSBLs (DNS black lists) etc.
Follow the below blog post on how to install bind9.
https://www.linuxbabe.com/ubuntu/set-up-local-dns-resolver-ubuntu-20-04-bind9
Or if you're using Ubuntu 18.04 then:
https://www.linuxbabe.com/ubuntu/set-up-local-dns-resolver-ubuntu-18-04-16-04-bind9
Now open up /etc/nginx/conf.d/example.com.conf and add these two lines below the ssl parameters.
resolver 127.0.0.1 valid=86400s;
resolver_timeout 5s;
Restart nginx:
sudo service nginx restartRestart the server by running sudo reboot and then SSH back in.
Next to test if everything is working run:
host -tTXT 2.0.0.127.multi.uribl.comYou should see the response
2.0.0.127.multi.uribl.com descriptive text "permanent testpoint"This means you can query URIBL successfully now.
Update /etc/spamassassin/local.cf and add this near the top:
dns_available yes
Then restart spamassassin.
sudo service spamassassin restartBefore updating, please check the release notes on GitHub for any breaking changes.
In order to update you can run the following commands:
git pull origin master
composer install --prefer-dist --no-dev -o
npm update
npm run production
php artisan migrate
php artisan config:cache
php artisan view:cache
php artisan route:cache
php artisan queue:restartThis should pull in any updates from the GitHub repository and update your dependencies. It will then run any migrations before finally clearing the cache and restarting the queue workers.
A big thank you to Xiao Guoan over at linuxbabe.com for all of his amazing articles. I highly recommend you subscribe to his newsletter.