vimspector - A multi language graphical debugger for Vim

For a tutorial and usage overview, take a look at the Vimspector website.

For detailed explanation of the .vimspector.json format, see the reference guide.

Features and Usage
Installation
About
- Background
What Vimspector is not
Mappings
- Visual Studio / VSCode
- Human Mode
Usage and API
Multiple debugging sessions
Debug profile configuration
Customisation
FAQ

Features and Usage

The plugin is a capable Vim graphical debugger for multiple languages. It's mostly tested for C++, Python and TCL, but in theory supports any language that Visual Studio Code supports (but see caveats).

The Vimspector website has an overview of the UI, along with basic instructions for configuration and setup.

But for now, here's a (rather old) screenshot of Vimspector debugging Vim:

And a couple of brief demos:

Supported debugging features

flexible configuration syntax that can be checked in to source control
breakpoints (function, line and exception breakpoints)
conditional breakpoints (function, line)
step in/out/over/up, stop, restart
run to cursor
go to line (reset program counter to line)
launch and attach, including PID picker
remote launch, remote attach
locals and globals display
watch expressions with autocompletion
variable inspection tooltip on hover
disassembly view and step-by-instruction
set variable value in locals, watch and hover windows
call stack display and navigation
hierarchical variable value display popup (see <Plug>VimspectorBalloonEval)
interactive debug console with autocompletion
launch debuggee within Vim's embedded terminal
logging/stdout display
simple stable API for custom tooling (e.g. integrate with language server)
view hex dump of process memory
multiple independent debugging sessions (debug different apps in tabs)
multi-process (multi-session) debugging

Supported languages

The following table lists the languages that are "built-in" (along with their runtime dependencies). They are categorised by their level of support:

Tested : Fully supported, Vimspector regression tests cover them
Supported : Fully supported, frequently used and manually tested
Experimental: Working, but not frequently used and rarely tested
Legacy: No longer supported, please migrate your config
Retired: No longer included or supported.

Language(s)	Status	Switch (for `install_gadget.py`)	Adapter (for `:VimspectorInstall`)	Dependencies
C, C++, Rust, Jai, etc.	Tested	`--all` or `--enable-c` (or cpp)	vscode-cpptools	mono-core
C, C++, Rust, Jai, etc.	Tested	`--enable-rust`, `--enable-c`, etc.	CodeLLDB	none
Python	Tested	`--all` or `--enable-python`	debugpy	Python 3
Go	Tested	`--enable-go`	delve	Go 1.16+
TCL	Supported	`--all` or `--enable-tcl`	tclpro	TCL 8.5
Bourne Shell	Supported	`--all` or `--enable-bash`	vscode-bash-debug	Bash v??
Lua	Tested	`--all` or `--enable-lua`	local-lua-debugger-vscode	Node >=12.13.0, Npm, Lua interpreter
Node.js	Supported	`--force-enable-node`	vscode-js-debug	Node >= 18
Node.js (legacy)	Supported	`--force-enable-node_legacy`	vscode-node-debug2	6 < Node < 12, Npm
Javascript	Supported	`--force-enable-chrome`	debugger-for-chrome	Chrome
Javascript	Supported	`--force-enable-firefox`	vscode-firefox-debug	Firefox
Java	Supported	`--force-enable-java`	vscode-java-debug	Compatible LSP plugin (see later)
PHP	Experimental	`--force-enable-php`	vscode-php-debug	Node, PHP, XDEBUG
C# (dotnet core)	Tested	`--force-enable-csharp`	netcoredbg	DotNet core
F#, VB, etc.	Supported	`--force-enable-[fsharp,vbnet]`	netcoredbg	DotNet core
Go (legacy)	Legacy	`--enable-go`	vscode-go	Node, Go, Delve
Python 2	Legacy	`--force-enable-python2`	debugpy-python2	Python 2.7

Other languages

Vimspector should work for any debug adapter that works in Visual Studio Code.

To use Vimspector with a language that's not "built-in", see this wiki page.

Installation

Quick Start

There are 3 installation methods:

Using a release tarball and Vim packages
Using a repo clone and Vim packages
Using a plugin manager

Method 1: Using a release tarball and Vim packages

Release tarballs come with debug adapters for the default languages pre-packaged. To use a release tarball:

Check the dependencies

Untar the release tarball for your OS into $HOME/.vim/pack:

$ mkdir -p $HOME/.vim/pack
$ curl -L <url> | tar -C $HOME/.vim/pack zxvf -

Add packadd! vimspector to your .vimrc
(optionally) Enable the default set of mappings:
```
let g:vimspector_enable_mappings = 'HUMAN'
```
Configure your project's debug profiles (create .vimspector.json, or set g:vimspector_configurations) - see the reference guide

Method 2: Using a repo clone, Vim packages and select gadgets to be installed

Check the dependencies
Install the plugin as a Vim package. See :help packages.
Add packadd! vimspector to your .vimrc
Install some 'gadgets' (debug adapters) - see here for installation commands and select gadgets to install
Configure your project's debug profiles (create .vimspector.json, or set g:vimspector_configurations) - see the reference guide

Method 3: Using a plugin manager

Check the dependencies
See the plugin manager's docs and install the plugin
For Vundle, use:
```
Plugin 'puremourning/vimspector'
```
Install some 'gadgets' (debug adapters) - see here for installation commands and select gadgets to install
Configure your project's debug profiles (create .vimspector.json, or set g:vimspector_configurations) - see the reference guide

The following sections expand on the above brief overview.

Dependencies

Vimspector requires:

One of:
- Vim 8.2.4797 or later "huge" build compiled with Python 3.10 or later
- Neovim 0.8 with Python 3.10 or later
One of the following operating systems:
- Linux
- macOS Mojave or later
- Windows (experimental)

Which Linux versions? I only test on Ubuntu 20.04 and later and RHEL 7.

Neovim limitations

neovim doesn't implement mouse hover balloons. Instead there is the <Plug>VimspectorBalloonEval mapping. There is no default mapping for this, so I recommend something like this to get variable display in a popup:

" mnemonic 'di' = 'debug inspect' (pick your own, if you prefer!)

" for normal mode - the word under the cursor
nmap <Leader>di <Plug>VimspectorBalloonEval
" for visual mode, the visually selected text
xmap <Leader>di <Plug>VimspectorBalloonEval

Windows differences

The following features are not implemented for Windows:

Tailing the vimspector log in the Output Window.

Trying it out

If you just want to try out vimspector without changing your vim config, there are example projects for a number of languages in support/test, including:

Python (support/test/python/simple_python)
Go (support/test/go/hello_world and support/test/go/name-starts-with-vowel)
Nodejs (support/test/node/simple)
Chrome/Firefox (support/test/web/)
etc.

To test one of these out, cd to the directory and run:

vim -Nu /path/to/vimspector/tests/vimrc --cmd "let g:vimspector_enable_mappings='HUMAN'"

Then press <F5>.

There's also a C++ project in tests/testdata/cpp/simple/ with a Makefile which can be used to check everything is working. This is used by the regression tests in CI so should always work, and is a good way to check if the problem is your configuration rather than a bug.

Cloning the plugin

If you're not using a release tarball, you'll need to clone this repo to the appropriate place.

Clone the plugin

There are many Vim plugin managers, and I'm not going to state a particular preference, so if you choose to use one, follow the plugin manager's documentation. For example, for Vundle, use:

Plugin 'puremourning/vimspector'

If you don't use a plugin manager already, install vimspector as a Vim package by cloning this repository into your package path, like this:

$ git clone https://github.com/puremourning/vimspector ~/.vim/pack/vimspector/opt/vimspector

Configure vimspector in your .vimrc, for example to enable the standard mappings:

let g:vimspector_enable_mappings = 'HUMAN'

Load vimspector at runtime. This can also be added to your .vimrc after configuring vimspector:

packadd! vimspector

See support/doc/example_vimrc.vim for a minimal example.

Install some gadgets

Vimspector is a generic client for Debug Adapters. Debug Adapters (referred to as 'gadgets' or 'adapters') are what actually do the work of talking to the real debuggers.

In order for Vimspector to be useful, you need to have some adapters installed.

There are a few ways to do this:

If you downloaded a tarball, gadgets for main supported languages are already installed for you.
Using :VimspectorInstall <adapter> <args...> (use TAB wildmenu to see the options, also accepts any install_gadget.py option)
Using python3 install_gadget.py <args> (use --help to see all options)
Attempting to launch a debug configuration; if the configured adapter can't be found, vimspector will suggest installing one.
Using :VimspectorUpdate to install the latest supported versions of the gadgets.

Here's a demo of doing some installs and an upgrade:

Both install_gadget.py and :VimspectorInstall do the same set of things, though the default behaviours are slightly different. For supported languages, they will:

Download the relevant debug adapter at a version that's been tested from the internet, either as a 'vsix' (Visusal Studio plugin), or clone from GitHub. If you're in a corporate environment and this is a problem, you may need to install the gadgets manually.
Perform any necessary post-installation actions, such as:
- Building any binary components
- Ensuring scripts are executable, because the VSIX packages are usually broken in this regard.
- Set up the gadgetDir symlinks for the platform.

For example, to install the tested debug adapter for a language, run:

To install	Script	Command
`<adapter>`		`:VimspectorInstall <adapter>`
`<adapter1>`, `<adapter2>`, ...		`:VimspectorInstall <adapter1> <adapter2> ...`
`<language>`	`./install_gadget.py --enable-<language> ...`	`:VimspectorInstall --enable-<language> ...`
Supported adapters	`./install_gadget.py --all`	`:VimspectorInstall --all`
Supported adapters, but not TCL	`./install_gadget.py --all --disable-tcl`	`:VimspectorInstall --all --disable-tcl`
Supported and experimental adapters	`./install_gadget.py --all --force-all`	`:VimspectorInstall --all`
Adapter for specific debug config		Suggested by Vimspector when starting debugging

VimspectorInstall and VimspectorUpdate commands

:VimspectorInstall runs install_gadget.py in the background with some of the options defaulted.

:VimspectorUpdate runs install_gadget.py to re-install (i.e. update) any gadgets already installed in your .gadgets.json.

The output is minimal, to see the full output add --verbose to the command, as in :VimspectorInstall --verbose ... or :VimspectorUpdate --verbose ....

If the installation is successful, the output window is closed (and the output lost forever). Use a ! to keep it open (e.g. :VimspectorInstall! --verbose --all or :VimspectorUpdate! (etc.).

If you know in advance which gadgets you want to install, for example so that you can reproduce your config from source control, you can set g:vimspector_install_gadgets to a list of gadgets. This will be used when:

Running :VimspectorInstall with no arguments, or
Running :VimspectorUpdate

For example:

let g:vimspector_install_gadgets = [ 'debugpy', 'vscode-cpptools', 'CodeLLDB' ]

install_gadget.py

By default install_gadget.py will overwrite your .gadgets.json with the set of adapters just installed, whereas :VimspectorInstall will update it, overwriting only newly changed or installed adapters.

If you want to just add a new adapter using the script without destroying the existing ones, add --update-gadget-config, as in:

$ ./install_gadget.py --enable-tcl
$ ./install_gadget.py --enable-rust --update-gadget-config
$ ./install_gadget.py --enable-java --update-gadget-config

If you want to maintain configurations outside of the vimspector repository (this can be useful if you have custom gadgets or global configurations), you can tell the installer to use a different basedir, then set g:vimspector_base_dir to point to that directory, for example:

$ ./install_gadget.py --basedir $HOME/.vim/vimspector-config --all --force-all

Then add this to your .vimrc:

let g:vimspector_base_dir=expand( '$HOME/.vim/vimspector-config' )

When using :VimspectorInstall, the g:vimspector_base_dir setting is respected unless --basedir is manually added (not recommended).

See --help for more info on the various options.

Manual gadget installation

If the language you want to debug is not in the supported list above, you can probably still make it work, but it's more effort.

You essentially need to get a working installation of the debug adapter, find out how to start it, and configure that in an adapters entry in either your .vimspector.json or in .gadgets.json or in g:vimspector_adapters.

The simplest way in practice is to install or start Visual Studio Code and use its extension manager to install the relevant extension. You can then configure the adapter manually in the adapters section of your .vimspector.json or in a gadgets.json or in g:vimspector_adapters.

PRs are always welcome to add supported languages (which roughly translates to updating python/vimspector/gadgets.py and testing it).

The gadget directory

Vimspector uses the following directory by default to look for a file named .gadgets.json: </path/to/vimspector>/gadgets/<os>.

This path is exposed as the vimspector variable ${gadgetDir}. This is useful for configuring gadget command lines.

Where os is one of:

macos
linux
windows (though note: Windows is not supported)

The format is the same as .vimspector.json, but only the adapters key is used:

Example:

{
  "adapters": {
    "lldb-vscode": {
      "variables": {
        "LLVM": {
          "shell": "brew --prefix llvm"
        }
      },
      "attach": {
        "pidProperty": "pid",
        "pidSelect": "ask"
      },
      "command": [
        "${LLVM}/bin/lldb-vscode"
      ],
      "env": {
        "LLDB_LAUNCH_FLAG_LAUNCH_IN_TTY": "YES"
      },
      "name": "lldb"
    },
    "vscode-cpptools": {
      "attach": {
        "pidProperty": "processId",
        "pidSelect": "ask"
      },
      "command": [
        "${gadgetDir}/vscode-cpptools/debugAdapters/bin/OpenDebugAD7"
      ],
      "name": "cppdbg"
    }
  }
}

The gadget file is automatically written by install_gadget.py (or :VimspectorInstall).

Vimspector will also load any files matching: </path/to/vimspector>/gadgets/<os>/.gadgets.d/*.json. These have the same format as .gadgets.json but are not overwritten when running install_gadget.py.

Upgrade

After updating the Vimspector code (either via git pull or whatever package manager), run :VimspectorUpdate to update any already-installed gadgets.

About

Background

The motivation is that debugging in Vim is a pretty horrible experience, particularly if you use multiple languages. With pyclewn no more and the built-in termdebug plugin limited to gdb, I wanted to explore options.

While Language Server Protocol is well known, the Debug Adapter Protocol is less well known, but achieves a similar goal: language agnostic API abstracting debuggers from clients.

The aim of this project is to provide a simple but effective debugging experience in Vim for multiple languages, by leveraging the debug adapters that are being built for Visual Studio Code.

The ability to do remote debugging is a must. This is key to my workflow, so baking it in to the debugging experience is a top bill goal for the project. So vimspector has first-class support for executing programs remotely and attaching to them. This support is unique to vimspector and on top of (complementary to) any such support in actual debug adapters.

What Vimspector is not

Vimspector is a vim UI on top of the Debug Adapter Protocol. It's intended to be high level and convenient for day-to-day debugging tasks.

Vimspector is not:

a debugger! It's just the UI and some glue.
fast. It's abstractions all the way down. If you want a fast, native debugger, there are other options.
comprehensive. It's limited by DAP, and limited by my time. I implement the features I think most users will need, not every feature possible.
for everyone. Vimspector intentionally provides a "one size fits all" UI and aproach. This means that it can only provide essential/basic debugging features for a given language. This makes it convenient for everyday usage, but not ideal for power users or those with very precise or specific requirements. See motivation for more info.

Status

Vimspector is a work in progress, and any feedback/contributions are more than welcome.

The backlog can be viewed on Trello.

Experimental

The plugin is currently experimental. That means that any part of it can (and probably will) change, including things like:

breaking changes to the configuration
keys, layout, functionality of the UI

However, I commit to only doing this in the most extreme cases and to announce such changes on Gitter well in advance. There's nothing more annoying than stuff just breaking on you. I get that.

Motivation

A message from the author about the motivation for this plugin:

Many development environments have a built-in debugger. I spend an inordinate amount of my time in Vim. I do all my development in Vim and I have even customised my workflows for building code, running tests etc.

For many years I have observed myself, friends and colleagues have been writing printf, puts, print, etc. debugging statements in all sorts of files simply because there is no easy way to run a debugger for whatever language we happen to be developing in.

I truly believe that interactive, graphical debugging environments are the best way to understand and reason about both unfamiliar and familiar code, and that the lack of ready, simple access to a debugger is a huge hidden productivity hole for many.

Don't get me wrong, I know there are literally millions of developers out there that are more than competent at developing without a graphical debugger, but I maintain that if they had the ability to just press a key and jump into the debugger, it would be faster and more enjoyable that just cerebral code comprehension.

I created Vimspector because I find changing tools frustrating. gdb for c++, pdb for python, etc. Each has its own syntax. Each its own lexicon. Each its own foibles.

I designed the configuration system in such a way that the configuration can be committed to source control so that it just works for any of your colleagues, friends, collaborators or complete strangers.

I made remote debugging a first-class feature because that's a primary use case for me in my job.

With Vimspector I can just hit <F5> in all of the languages I develop in and debug locally or remotely using the exact same workflow, mappings and UI. I have integrated this with my Vim in such a way that I can hit a button and run the test under the cursor in Vimspector. This kind of integration has massively improved my workflow and productivity. It's even made the process of learning a new codebase... fun.

- Ben Jackson, Creator.

License

Apache 2.0

Sponsorship

If you like Vimspector so much that you're wiling to part with your hard-earned cash, please consider donating to one of the following charities, which are meaningful to the author of Vimspector (in order of preference):

Mappings

By default, vimspector does not change any of your mappings. Mappings are very personal and so you should work out what you like and use vim's powerful mapping features to set your own mappings. To that end, Vimspector defines the following <Plug> mappings:

Mapping	Function	API
`<Plug>VimspectorContinue`	When debugging, continue. Otherwise start debugging.	`vimspector#Continue()`
`<Plug>VimspectorStop`	Stop debugging.	`vimspector#Stop()`
`<Plug>VimpectorRestart`	Restart debugging with the same configuration.	`vimspector#Restart()`
`<Plug>VimspectorPause`	Pause debuggee.	`vimspector#Pause()`
`<Plug>VimspectorBreakpoints`	Show/hide the breakpoints window	`vimspector#ListBreakpoints()`
`<Plug>VimspectorToggleBreakpoint`	Toggle line breakpoint on the current line.	`vimspector#ToggleBreakpoint()`
`<Plug>VimspectorToggleConditionalBreakpoint`	Toggle conditional line breakpoint or logpoint on the current line.	`vimspector#ToggleBreakpoint( { trigger expr, hit count expr } )`
`<Plug>VimspectorAddFunctionBreakpoint`	Add a function breakpoint for the expression under cursor	`vimspector#AddFunctionBreakpoint( '<cexpr>' )`
`<Plug>VimspectorGoToCurrentLine`	Reset the current program counter to the current line	`vimspector#GoToCurrentLine()`
`<Plug>VimspectorRunToCursor`	Run to Cursor	`vimspector#RunToCursor()`
`<Plug>VimspectorStepOver`	Step Over	`vimspector#StepOver()`
`<Plug>VimspectorStepInto`	Step Into	`vimspector#StepInto()`
`<Plug>VimspectorStepOut`	Step out of current function scope	`vimspector#StepOut()`
`<Plug>VimspectorDisassemble`	Show disassembly. Enable instruction stepping	`vimspector#ShowDisassembly()`
`<Plug>VimspectorUpFrame`	Move up a frame in the current call stack	`vimspector#UpFrame()`
`<Plug>VimspectorDownFrame`	Move down a frame in the current call stack	`vimspector#DownFrame()`
`<Plug>VimspectorJumpToNextBreakpoint`	Move Cursor to the next breakpoint in current file	`vimspector#JumpToNextBreakpoint()`
`<Plug>VimspectorJumpToPreviousBreakpoint`	Move Cursor to the previous breakpoint in current file	`vimspector#JumpToPreviousBreakpoint()`
`<Plug>VimspectorJumpToProgramCounter`	Move Cursor to the program counter in the current frame	`vimspector#JumpToProgramCounter()`
`<Plug>VimspectorBalloonEval`	Evaluate expression under cursor (or visual) in popup	internal

These map roughly 1-1 with the API functions below.

For example, if you want <F5> to start/continue debugging, add this to some appropriate place, such as your vimrc (hint: run :e $MYVIMRC).

nmap <F5> <Plug>VimspectorContinue

In addition, many users probably want to only enable certain Vimspector mappings while debugging is active. This is also possible, though it requires writing some vimscipt.

That said, many people are familiar with particular debuggers, so the following mappings can be enabled by setting g:vimspector_enable_mappings to the specified value.

Visual Studio / VSCode

To use Visual Studio-like mappings, add the following to your vimrc before loading vimspector:

let g:vimspector_enable_mappings = 'VISUAL_STUDIO'

Key	Mapping	Function
`F5`	`<Plug>VimspectorContinue`	When debugging, continue. Otherwise start debugging.
`Shift F5`	`<Plug>VimspectorStop`	Stop debugging.
`Ctrl Shift F5`	`<Plug>VimspectorRestart`	Restart debugging with the same configuration.
`F6`	`<Plug>VimspectorPause`	Pause debuggee.
`F8`	`<Plug>VimspectorJumpToNextBreakpoint`	Jump to next breakpoint in the current file.
`Shift F8`	`<Plug>VimspectorJumpToPreviousBreakpoint`	Jump to previous breakpoint in the current file.
`F9`	`<Plug>VimspectorToggleBreakpoint`	Toggle line breakpoint on the current line.
`Shift F9`	`<Plug>VimspectorAddFunctionBreakpoint`	Add a function breakpoint for the expression under cursor
`F10`	`<Plug>VimspectorStepOver`	Step Over
`Ctrl F10`	`<Plug>VimspectorRunToCursor`	Run to cursor*
`F11`	`<Plug>VimspectorStepInto`	Step Into
`Shift F11`	`<Plug>VimspectorStepOut`	Step out of current function scope
`Alt 8`	`<Plug>VimspectorDisassemble`	Show disassembly

NOTE: Some mappings, such as ctrl and F-keys may not work depending on your terminal, keyboard, windowing system and all sorts of other things. See :help modifyOtherKeys and other sources. If you are unable to make this work, just use the "human mode" mappings.

Human Mode

If, like me, you only have 2 hands and 10 fingers, you probably don't like Ctrl-Shift-F keys. Also, if you're running in a terminal, there's a real possibility of terminfo being wrong for shifted-F-keys, particularly if your TERM is screen-256color. If these issues (number of hands, TERM variables) are unfixable, try the following mappings, by adding the following before loading vimspector:

let g:vimspector_enable_mappings = 'HUMAN'

Key	Mapping	Function
`F5`	`<Plug>VimspectorContinue`	When debugging, continue. Otherwise start debugging.
`F3`	`<Plug>VimspectorStop`	Stop debugging.
`F4`	`<Plug>VimspectorRestart`	Restart debugging with the same configuration.
`F6`	`<Plug>VimspectorPause`	Pause debuggee.
`F9`	`<Plug>VimspectorToggleBreakpoint`	Toggle line breakpoint on the current line.
`<leader>F9`	`<Plug>VimspectorToggleConditionalBreakpoint`	Toggle conditional line breakpoint or logpoint on the current line.
`F8`	`<Plug>VimspectorAddFunctionBreakpoint`	Add a function breakpoint for the expression under cursor
`<leader>F8`	`<Plug>VimspectorRunToCursor`	Run to Cursor
`F10`	`<Plug>VimspectorStepOver`	Step Over
`F11`	`<Plug>VimspectorStepInto`	Step Into
`F12`	`<Plug>VimspectorStepOut`	Step out of current function scope

In addition, I recommend adding a mapping to <Plug>VimspectorBalloonEval, in normal and visual modes, for example:

" mnemonic 'di' = 'debug inspect' (pick your own, if you prefer!)

" for normal mode - the word under the cursor
nmap <Leader>di <Plug>VimspectorBalloonEval
" for visual mode, the visually selected text
xmap <Leader>di <Plug>VimspectorBalloonEval

You may also wish to add mappings for navigating up/down the stack, toggling the breakpoints window, and showing disassembly, for example:

nmap <LocalLeader><F11> <Plug>VimspectorUpFrame
nmap <LocalLeader><F12> <Plug>VimspectorDownFrame
nmap <LocalLeader>B     <Plug>VimspectorBreakpoints
nmap <LocalLeader>D     <Plug>VimspectorDisassemble

Usage and API

This section defines detailed usage instructions, organised by feature. For most users, the mappings section contains the most common commands and default usage. This section can be used as a reference to create your own mappings or custom behaviours.

All the below instructions assume a single debugging session. For deatils on how to debug multiple independent apps at the same time, see [multiple debugging sessions][#multiple-debugging-sessions].

Launch and attach by PID:

Create .vimspector.json. See below.
:call vimspector#Launch() and select a configuration.

Launching a new session makes it the active [debugging session][#multiple-debugging-sessions].

Picking a PID

If the debug adapter configuration uses pidProperty, and you make an attach request, then you will be asked to enter a PID (process ID) to attach to.

To make this easier, Vimspector supplies a little utility for listing PIDs. It's like a very very simple clone of ps but works on all the supported platforms. See its README for instructions on setting it up.

In short:

If you used a tarball installation, you don't need to do anything.
Otherwise, run go build in the support/vimspector_process_list directory

If Vimspector is able to find this app, it will try to list all processes owned by the current user by default.

Alternatively (preferably), you can use a special form of variable expansion called ${PickProcess(\"binaryName\")}. The version of this call will list all processes for the current user that match this binary name.

For example:

"Attach": {
  "adapter": "CodeLLDB",
  "configuration": {
    "request": "attach",
    "program": "${workspaceRoot}/Jails",
    "pid": "${PickProcess(\"jails\")}"
  }
}

This will list each matching processes, its parent process, start time and working directory. It's looks something like this:

PID   PPID           CWD                                           START
52218 52217 (Python) /Users/ben/.vim/bundle/lsp-examples/jai/Jails 2023-05-22 16:02:24
Enter Process ID:

You then enter the PID and hit <CR>.

You can even replace the process picker with your own function. If you define some function and set g:vimspector_custom_process_picker_func to the name of that function. It will be passed any arguments passed to the PickProcess expansion function. It will also be used whenever a pidProperty is specified, so it must also handle no arguments (use ... as the formal arguments for the function, see :help ...).

For example, to use fzf along with the supplied vimspector_process_list:

function! CustomPickProcess( ... ) abort
  let ps = $HOME .. '/.vim/bundle/vimspector/support/vimspector_process_list/vimspector_process_list'
  " a:0 is number of args
  " a:1 is the optional binary name
  if a:0 > 0
    let ps .= ' ^' . a:1 . '$'
  endif

  let line_selected = fzf#run( {
      \ 'source': ps,
      \ 'options': '--header-lines=1  '
      \          . '--prompt="Select Process: " '
      \ ,
      \
      \ } )[ 0 ]
  if empty( line_selected)
    return 0
  endif
  let pid = split( line_selected )[ 0 ]
  return str2nr( pid )
endfunction


let g:vimspector_custom_process_picker_func = 'CustomPickProcess'

Or to use fzf with the output of ps:

function! CustomPickProcess( ... ) abort
  let ps = 'ps aux'

  let line_selected = fzf#run( {
      \ 'source': ps,
      \ 'options': '--header-lines=1  '
      \          . '--prompt="Select Process: " '
      \ ,
      \
      \ } )[ 0 ]
  if empty( line_selected)
    return 0
  endif
  let pid = split( line_selected )[ 0 ]
  return str2nr( pid )
endfunction


let g:vimspector_custom_process_picker_func = 'CustomPickProcess'

Launch with options

To launch a specific debug configuration, or specify replacement variables for the launch, you can use:

:call vimspector#LaunchWithSettings( dict )

The argument is a dict with the following keys:

configuration: (optional) Name of the debug configuration to launch
<anything else>: (optional) Name of a variable to set

This allows for some integration and automation. For example, if you have a configuration named Run Test that contains a replacement variable named ${Test} you could write a mapping which ultimately executes:

vimspector#LaunchWithSettings( #{ configuration: 'Run Test'
                                \ Test: 'Name of the test' } )

This would start the Run Test configuration with ${Test} set to 'Name of the test' and Vimspector would not prompt the user to enter or confirm these things.

See our YouCompleteMe integration guide for another example where it can be used to specify the port to connect the java debugger

To launch with an ad-hoc config you can use:

call vimspector#LaunchWithConfigurations( dict )

The argument is a dict which is the configurations section of a .vimspector file. Pass one configuration in and that will be selected as the one to run. For example:

   let pid = <some_expression>
   call vimspector#LaunchWithConfigurations({
               \  "attach": {
               \    "adapter": "netcoredbg",
               \    "configuration": {
               \      "request": "attach",
               \      "processId": pid
               \    }
               \  }
               \})

This would launch the debugger and attach to the specified process without the need to have a local .vimspector file on disk. The ${workspaceRoot} variable will point to the parent folder of the file that is currently open in vim.

Debug configuration selection

Vimspector uses the following logic to choose a configuration to launch:

If a configuration was specified in the launch options (as above), use that.
Otherwise if there's only one configuration and it doesn't have autoselect set to false, use that.
Otherwise if there's exactly one configuration with default set to true and without autoselect set to false, use that.
Otherwise, prompt the user to select a configuration.

See the reference guide for details.

Get configurations

Use vimspector#GetConfigurations() to get a list of configurations for the filetype of the current buffer

For example, to get an array of configurations and fuzzy matching on the result

:call matchfuzzy(vimspector#GetConfigurations(), "test::case_1")

Breakpoints

See the mappings section for the default mappings for working with breakpoints. This section describes the full API in vimscript functions.

Breakpoints are associated with the current [debugging session][#multiple-debugging-sessions]. When switching between sessions, the breakpont signs for the previous session are removed and the breakpoints for the newly activated session are displayed. While it might be useful to see breakpoints for all sessions, this can be very confusing.

Breakpoints Window

Use :VimspectorBreakpoints or map something to <Plug>VimspectorBreakpoints to open the breakpoints view. From here you can list, jump to delete, add and toggle breakpoints.

I recommend a mapping like this to toggle the breakpoints window:

nmap <Leader>db <Plug>VimspectorBreakpoints

The following mappings apply by default in the breakpoints window:

t, <F9> - toggle, i.e. enable/disable breakpoint
T - toggle, i.e. enable/disable ALL breakpoints
dd, <Del> - delete the current breakpoint
cc, C - edit the current breakpoint options
i, a, o - add a new line breakpoint
I, A, O - add a new function breakpoint
<Enter> or double-click - jump to the line breakpoint

A WinBar is provided (where supported) too. This adds functions like saving/restoring sessions, clearing all breakpoints, and resetting the exception breakpoints options.

Line breakpoints

The simplest and most common form of breakpoint is a line breakpoint. Execution is paused when the specified line is executed.

For most debugging scenarios, users will just hit <F9> to create a line breakpoint on the current line and <F5> to launch the application.

Conditional breakpoints and logpoints

Some debug adapters support conditional breakpoints. Note that vimspector does not tell you if the debugger doesn't support conditional breakpoints (yet). A conditional breakpoint is a breakpoint which only triggers if some expression evaluates to true, or has some other constraints met.

Some of these functions above take a single optional argument which is a dictionary of options. The dictionary can have the following keys:

condition: An optional expression evaluated to determine if the breakpoint should fire. Not supported by all debug adapters. For example, to break when abc is 10, enter something like abc == 10, depending on the language.
hitCondition: An optional expression evaluated to determine a number of times the breakpoint should be ignored. Should (probably?) not be used in combination with condition. Not supported by all debug adapters. For example, to break on the 3rd time hitting this line, enter 3.
logMessage: An optional string to make this breakpoint a "logpoint" instead. When triggered, this message is printed to the console rather than interrupting execution. You can embed expressions in braces {like this}, for example #{ logMessage: "Iteration {i} or {num_entries / 2}" }

In each case expressions are evaluated by the debugger, so should be in whatever dialect the debugger understands when evaluating expressions.

When using the <leader><F9> mapping, the user is prompted to enter these expressions in a command line (with history).

Exception breakpoints

Exception breakpoints typically fire when an exception is throw or other error condition occurs. Depending on the debugger, when starting debugging, you may be asked a few questions about how to handle exceptions. These are "exception breakpoints" and vimspector remembers your choices while Vim is still running.

Typically you can accept the defaults (just keep pressing <CR>!) as most debug adapter defaults are sane, but if you want to break on, say uncaught exception then answer Y to that (for example).

You can configure your choices in the .vimspector.json. See the configuration guide for details on that.

API Summary

NOTE: Previously, ToggleBreakpoint would cycle between 3 states: enabled, disabled, deleted. Many users found the 'disabled' state was rarely useful, so the behaviour has been changed. ToggleBreakpoint always creates or deletes a breakpoint. If you wish to 'disable' breakpoints, use the breakpoints window and 'toggle' (t) from there.

Use vimspector#ToggleBreakpoint( { options dict } ) to set/delete a line breakpoint. The argument is optional (see below).
Use vimspector#AddFunctionBreakpoint( '<name>', { options dict} ) to add a function breakpoint. The second argument is optional (see below).
Use vimspector#SetLineBreakpoint( file_name, line_num, { options dict } ) to set a breakpoint at a specific file/line. The last argument is optional (see below)
Use vimspector#ClearLineBreakpoint( file_name, line_num ) to remove a breakpoint at a specific file/line
Use vimspector#ClearBreakpoints() to clear all breakpoints
Use vimspector#ResetExceptionBreakpoints() to clear the exception breakpoints configuration and re-anser the various questions like "Break on C++ Throw"
Use :VimspectorMkSession and :VimspectorLoadSession to save and restore breakpoints
call vimspector#ListBreakpoints() - toggle breakpoints window
call vimspector#BreakpointsAsQuickFix() - return the current set of breakpoints in vim quickfix format

Examples:

call vimspector#ToggleBreakpoint() - toggle breakpoint on current line
call vimspector#SetLineBreakpoint( 'some_file.py', 10 ) - set a breakpoint on some_filepy:10
call vimspector#AddFunctionBreakpoint( 'main' ) - add a function breakpoint on the main function
call vimspector#ToggleBreakpoint( { 'condition': 'i > 5' } ) - add a breakpoint on the current line that triggers only when i > 5 is true
call vimspector#SetLineBreakpoint( 'some_file.py', 10, { 'condition': 'i > 5' } ) - add a breakpoint at some_file.py:10 that triggers only when i > 5 is true
call vimspector#ClearLineBreakpoint( 'some_file.py', 10 ) - delete the breakpoint at some_file.py:10
call vimspector#ClearBreakpoints() - clear all breakpoints
VimspectorMkSession - create .vimspector.session
VimspectorLoadSession - read .vimspector.session
VimspectorMkSession my_session_file - create my_session_file
VimspectorLoadSession my_session_file - read my_session_file

Instruction breakpoints

NOTE: Experimental feature, which may change significantly in future based on user feedback.

Instruction breakpoints can be added from the disassembly window in the same way that you add line breakpoints in the code window. The same mappings and functions work for adding and toggling them. Where supported by the debug adapter, you can even create logpoints and conditional breakpoints this way.

Currently, instruction breakpoints are internally modelled as line breakpoints against the buffer containing the disassembly, but that may change in future, so please don't rely on this.

Instruction breakpoints are also visible from and can be deleted/disabled from the breakpoints window.

Currently, instruction breakpoints are automatically cleared when the debug session ends. The reason for this is that the addresses can't be guaranteed to be valid for any other debug session. However, this may also change in future.

Clear breakpoints

Use vimspector#ClearBreakpoints() to clear all breakpoints including the memory of exception breakpoint choices.

Run to Cursor

Use vimspector#RunToCursor or <leader><F8>: this creates a temporary breakpoint on the current line, then continues execution, clearing the breakpoint when it is hit.

Go to current line

Use vimspector#GoToCurrentLine() or some mapping to <Plug>VimspectorGoToCurrentLine to jump the current execution to the line your cursor is currently on.

Where supported this can be useful to re-run sections of code or skip over them entirely.

If there are multiple possible "targets" on the current line, you're prompted to pick one.

Save and restore

Vimspector can save and restore breakpoints (and some other stuff) to a session file. The following commands exist for that:

VimspectorMkSession [file/dir name] - save the current set of line breakpoints, logpoints, conditional breakpoints, function breakpoints and exception breakpoint filters to the supplied session file or the default file in the supplied directory.
VimspectorLoadSession [file/dir name] - read breakpoints from the session file supplied or the default file in the supplied directory and replace any currently set breakpoints. Prior to loading, all current breakpoints are cleared (as if vimspector#ClearLineBreakpoints() was called).

In both cases, the file/dir name argument is optional. By default, the file is named .vimspector.session, but this can be changed globally by setting g:vimspector_session_file_name to something else, or by manually specifying a path when calling the command. If you supply a directory, the default or configured session file name is read fron or written to that directory. Othewise, the file is read based on the currently open buffer or written to the current working directory.

Advanced users may wish to automate the process of loading and saving, for example by adding VimEnter and VimLeave autocommands. It's recommended in that case to use silent! to avoid annoying errors if the file can't be read or written.

The simplest form of automation is to load the vimspector session whenever you start vim with a session file. This is as simple as doing this:

$ echo silent VimspectorLoadSession > Sessionx.vim

See :help mksession for details of the *x.vim file. You can also do something like this using SessionLoadPost:

autocmd SessionLoadPost * silent! VimspectorLoadSession

Stepping

Step in/out, finish, continue, pause etc. using the WinBar, or mappings.
Stepping is contextual. By default, stepping is statement granularity. But if your cursor is in the disassembly window, then stepping defaults to instruction granularity.
If you really want to, the API is vimspector#StepInto() etc.. There are also vimspector#StepSOver() and vimspector#StepIOver() etc. variants for statement and instruction granularity respectively.

Variables and scopes

Current scope shows values of locals.
Use <CR>, or double-click with left mouse to expand/collapse (+, -).
Set the value of the variable with <C-CR> (control + <CR>) or <leader><CR> (if modifyOtherKeys doesn't work for you)
View the type of the variable via mouse hover.
When changing the stack frame the locals window updates.
While paused, hover to see values.

Scopes and variables are represented by the buffer vimspector.Variables.

If you prefer a more verbose display for variables and watches, then you can let g:vimspector_variables_display_mode = 'full'. By default only the name and value are displayed, with other data available from hovering the mouse or triggering <Plug>VimspectorBalloonEval on the line containing the value in the variables (or watches) window.

Variable or selection hover evaluation

All rules for Variables and scopes apply plus the following:

With mouse enabled, hover over a variable and get the value it evaluates to. This applies to the variables and watches windows too, and allows you to view the type of the value.
Use your mouse to perform a visual selection of an expression (e.g. a + b) and get its result.
Make a normal mode (nmap) and visual mode (xmap) mapping to <Plug>VimspectorBalloonEval to manually trigger the popup.
- Set the value of the variable with <C-CR> (control + <CR>) or <leader><CR> (if modifyOtherKeys doesn't work for you)
- Use regular navigation keys (j, k) to choose the current selection; <Esc> (or leave the tooltip window) to close the tooltip.

You can disable automatic hovering popup by settings g:vimspector_enable_auto_hover=0 before starting the debug session. You can then map something to <Plug>VimspectorBalloonEval and trigger it manually.

Watches

The watch window is used to inspect variables and expressions. Expressions are evaluated in the selected stack frame which is "focussed"

The watches window is a prompt buffer, where that's available. Enter insert mode to add a new watch expression.

Add watches to the variables window by entering insert mode and typing the expression. Commit with <CR>.
Alternatively, use :VimspectorWatch <expression>. Tab-completion for expression is available in some debug adapters.
View the type of the variable via mouse hover.
Expand result with <CR>, or double-click with left mouse.
Set the value of the variable with <C-CR> (control + <CR>) or <leader><CR> (if modifyOtherKeys doesn't work for you)
Delete with <DEL>.

The watches are represented by the buffer vimspector.Watches.

If you prefer a more verbose display for variables and watches, then you can let g:vimspector_variables_display_mode = 'full'. By default only the name and value are displayed, with other data available from hovering the mouse or triggering <Plug>VimspectorBalloonEval on the line containing the value in the variables (or watches) window.

You can disable automatic hovering popup by settings g:vimspector_enable_auto_hover=0 before starting the debug session. You can then map something to <Plug>VimspectorBalloonEval and trigger it manually.

Watch autocompletion

The watch prompt buffer has its omnifunc set to a function that will calculate completion for the current expression. This is trivially used with <Ctrl-x><Ctrl-o> (see :help ins-completion), or integrated with your favourite completion system. The filetype in the buffer is set to VimspectorPrompt.

For YouCompleteMe, the following config works well:

let g:ycm_semantic_triggers =  {
  \   'VimspectorPrompt': [ '.', '->', ':', '<' ]
}

Disassembly

Dispplay disassembly around current PC
Step over/into/out by instruction (contextually, or using the WinBar)
:VimspectorDisassemble, vimspector#ShowDisassembly() or <Plug>VimspectorDisassemble

Some debug adapters (few!) support disassembly. The way this works in DAP is a little wierd, but in practice vimspector will ask to disassemble a number of instructions around the current stack frame's PC. This is then shown in a window with a WinBar similar to the Code window, but with instruction stepping granularity. There's a sign for the current instruction and the syntax highighting defaults to "asm" which mostly works ok for x86 and ARM.

As mentioned above, when your current window is the disassembly windows and you use the default "step" commands (e.g. <F10>), the stepping is automatically chnged to per-instruction rather than per statement.

Each time the process stops, vimspector requests about 2 windows full of instructions around the current PC. To see more, you can scroll the window. Vimspector will page in an extra screenful of instructions when the window scrolls to the top or near the bottom. This isn't perfect. Sometimes you have to scroll a bit more to make it page in (e.g. ctrl-e ctrl-y at the top). This is not ideal, and may be improved in future.

You can control the intial height of the disassembly window with let g:vimspector_disassembly_height = 10 (or whatver number of lines).

The filetype (and syntax) of the buffers in the disassembly window is vimspector-disassembly. You can use FileType autocommands to customise things like the syntax highlighting.

NOTE: This feature is experimental and may change in any way based on user feedback.

Dump memory

Some debug adapters provide a way to dump process memory associated with variables. This can be done from the Variables and Watches windows with:

The WinBar option "Dump"
<leader>m mapping (by default, can be customised)
vimspector#ReadMemory() function

On doing this, you're asked to enter a number of bytes to read (from the location associated with the current cursor line) and an offset from that location. A new buffer is displayed in the Code Window containing a memory dump in hex and ascii, similar to the output of xxd.

NOTE: This feature is experimental and may change in any way based on user feedback.

Stack Traces

The stack trace window shows the state of each program thread. Threads which are stopped can be expanded to show the stack trace of that thread.

Often, but not always, all threads are stopped when a breakpoint is hit. The status of a thread is show in parentheses after the thread's name. Where supported by the underlying debugger, threads can be paused and continued individually from within the Stack Trace window.

A particular thread, highlighted with the CursorLine highlight group is the "focussed" thread. This is the thread that receives commands like "Step In", "Step Out", "Continue" and "Pause" in the code window. The focussed thread can be changed manually to "switch to" that thread.

Use <CR>, or double-click with left mouse to expand/collapse a thread stack trace, or use the WinBar button.
Use <CR>, or double-click with left mouse on a stack frame to jump to it.
Use the WinBar or vimspector#PauseContinueThread() to individually pause or continue the selected thread.
Use the "Focus" WinBar button, <leader><CR> or vimspector#SetCurrentThread() to set the "focussed" thread to the currently selected one. If the selected line is a stack frame, set the focussed thread to the thread of that frame and jump to that frame in the code window.
The current frame when a breakpoint is hit or if manual jumping is also highlighted.

The stack trace is represented by the buffer vimspector.StackTrace.

Child sessions

If there are child debug sessions, such as where the debugee launches child processes and the debug adapter supports multi-session debugging, then each session's threads are shown separately. The currently active session is the one that is highlighted as the currently active thread/stack frame. To switch control to a different session, focus a thread within that session.

Note: This refers to sessions created as children of an existing session, and is not to be confused with [multiple (parent) debugging sessions][#multiple-debugging-sessions].

Program Output

In the outputs window, use the WinBar to select the output channel.
Alternatively, use :VimspectorShowOutput <category>. Use command-line completion to see the categories.
The debuggee prints to the stdout channel.
Other channels may be useful for debugging.

If the output window is closed, a new one can be opened with :VimspectorShowOutput <category> (use tab-completion - wildmenu to see the options).

Console

The console window is a prompt buffer, where that's available, and can be used as an interactive CLI for the debug adapter. Support for this varies amongst adapters.

Enter insert mode to enter a command to evaluate.
Alternatively, :VimspectorEval <expression>. Completion is available with some debug adapters.
Commit the request with <CR>
The request and subsequent result are printed.

NOTE: See also Watches above.

If the output window is closed, a new one can be opened with :VimspectorShowOutput Console.

Console autocompletion

The console prompt buffer has its omnifunc set to a function that will calculate completion for the current command/expression. This is trivially used with <Ctrl-x><Ctrl-o> (see :help ins-completion), or integrated with your favourite completion system. The filetype in the buffer is set to VimspectorPrompt.

For YouCompleteMe, the following config works well:

let g:ycm_semantic_triggers =  {
  \   'VimspectorPrompt': [ '.', '->', ':', '<' ]
}

Log View

The Vimspector log file contains a full trace of the communication between Vimspector and the debug adapter. This is the primary source of diagnostic information when something goes wrong that's not a Vim traceback.

If you just want to see the Vimspector log file, use :VimspectorToggleLog, which will tail it in a little window (doesn't work on Windows).

You can see some debugging info with :VimspectorDebugInfo

Closing debugger

To close the debugger, use:

Reset WinBar button
:VimspectorReset when the WinBar is not available.
call vimspector#Reset()

Terminate debuggee

If the debuggee is still running when stopping or resetting, then some debug adapters allow you to specify what should happen to it when finishing debugging. Typically, the default behaviour is sensible, and this is what happens most of the time. These are the defaults according to DAP:

If the request was 'launch': terminate the debuggee
If the request was 'attach': don't terminate the debuggee

Some debug adapters allow you to choose what to do when disconnecting. If you wish to control this behaviour, use :VimspectorReset or call vimspector#Reset( { 'interactive': v:true } ). If the debug adapter offers a choice as to whether or not to terminate the debuggee, you will be prompted to choose. The same applies for vimspector#Stop() which can take an argument: vimspector#Stop( { 'interactive': v:true } ).

Multiple debugging sessions

NOTE: This feature is experimental and any part of it may change in response to user feedback.

Vimspector supports starting an arbitrary number of debug sessions. Each session is associated with an individual UI tab. Typically, you only debug a single app and so don't need to think about this, but this advanced feature can be useful if you need to simultaneously debug multiple, independent applications, or multiple independent instances of your application.

At any time there is a single "active" root session. Breakpoints are associated with the current session, and all UI and API commands are applied to the currently active session.

When switching between root sessions, the breakpont signs for the previous session are removed and the breakpoints for the newly activated session are displayed. While it might be useful to see breakpoints for all sessions, this can be very confusing.

A typical workflow might be:

Start debugging a server app (e.g. :edit server.cc then <F5>). This starts a debug session named after the configuration selected. You could rename it :VimspectorRenameSession server.
Open the client code in a new tab (e.g. :tabedit client.cc)
Instantiate and make active a new debugging session and name it client: :VimspectorNewSession client (client is now the active session).
Add a breakpoint in the client session and start debugging with <F5>.

You now have 2 vimspector tabs. Intuitively, wwitching to a particular tab will make its session active. You can also manually switch the active session with :VimspectorSwitchToSession <name>.

So, in summary you have the following facilities:

VimspectorNewSession <name> This creates a new session and makes it active. Optional name is used in place of the generated one when starting a launch.
Switching to a specific debug tab makes that session active. This is intuitive and probably the most common way to work with this.
Switching manually using VimspectorSwitchToSession <tab complete>.
Name/Rename session with VimspectorRenameSession <new name>
Root-level sessions are never 'destroyed' but you can manually destroy them (if you're brave) using VimspectorDestroySession <name>. You can't destroy a running/active session.
vimspector#GetSessionName() useful for putting in a statusline. There's also vimspector#GetSessionID() for techies.

Here's an example of how you can display the current session name in the statusline (see :help statusline, or the documentation for your fancy status line plugin).

function! StlVimspectorSession()
  " Only include in buffers containing actual files
  if !empty( &buftype )
    return ''
  endif

  " Abort if vimspector not loaded
  if !exists( '*vimspector#GetSessionName' ) ||
        \ !exists( '*vimspector#GetSessionID' )
    return ''
  endif

  return vimspector#GetSessionName()
        \ .. ' ('
        \ .. vimspector#GetSessionID()
        \ .. ')'
endfunction

" ... existing statusline stuff
" set statusline=...
" Show the vimspector active session name (max 20 chars) if there is onw.
set statusline+=%(\ %.20{StlVimspectorSession()}\ %)

Debug profile configuration

For an introduction to the configuration of .vimspector.json, take a look at the Getting Started section of the Vimspector website.

For a full explanation, including how to use variables, substitutions and how to specify exception breakpoints, see the docs.

The JSON configuration file allows C-style comments:

// comment to end of line ...
/* inline comment ... */

Currently tested with the following debug adapters.

C, C++, Rust, etc.

vscode-cpptools
On macOS, I strongly recommend using CodeLLDB instead for C and C++ projects. It's really excellent, has fewer dependencies and doesn't open console apps in another Terminal window.

Example .vimspector.json (works with both vscode-cpptools and lldb-vscode. For lldb-vscode replace the name of the adapter with lldb-vscode:

vscode-cpptools Linux/MacOS:

{
  "configurations": {
    "Launch": {
      "adapter": "vscode-cpptools",
      "filetypes": [ "cpp", "c", "objc", "rust" ], // optional
      "configuration": {
        "request": "launch",
        "program": "<path to binary>",
        "args": [ ... ],
        "cwd": "<working directory>",
        "environment": [ ... ],
        "externalConsole": true,
        "MIMode": "<lldb or gdb>"
      }
    },
    "Attach": {
      "adapter": "vscode-cpptools",
      "filetypes": [ "cpp", "c", "objc", "rust" ], // optional
      "configuration": {
        "request": "attach",
        "program": "<path to binary>",
        "MIMode": "<lldb or gdb>"
      }
    }
    // ...
  }
}

vscode-cpptools Windows

NOTE FOR WINDOWS USERS: You need to install gdb.exe. I recommend using scoop install gdb. Vimspector cannot use the visual studio debugger due to licensing.

{
  "configurations": {
    "Launch": {
      "adapter": "vscode-cpptools",
      "filetypes": [ "cpp", "c", "objc", "rust" ], // optional
      "configuration": {
        "request": "launch",
        "program": "<path to binary>",
        "stopAtEntry": true
      }
    }
  }
}

Data visualization / pretty printing

Depending on the backend you need to enable pretty printing of complex types manually.

LLDB: Pretty printing is enabled by default
GDB: To enable gdb pretty printers, consider the snippet below. It is not enough to have set print pretty on in your .gdbinit!

{
  "configurations": {
    "Launch": {
      "adapter": "vscode-cpptools",
      "filetypes": [ "cpp", "c", "objc", "rust" ], // optional
      "configuration": {
        "request": "launch",
        "program": "<path to binary>",
        // ...
        "MIMode": "gdb",
        "setupCommands": [
          {
            "description": "Enable pretty-printing for gdb",
            "text": "-enable-pretty-printing",
            "ignoreFailures": true
          }
        ]
      }
    }
  }
}

C++ Remote debugging

The cpptools documentation describes how to attach cpptools to gdbserver using miDebuggerAddress. Note that when doing this you should use the "request": "attach".

C++ Remote launch and attach

If you're feeling fancy, check out the reference guide for an example of getting Vimspector to remotely launch and attach.

CodeLLDB (MacOS)

CodeLLDB is superior to vscode-cpptools in a number of ways on macOS at least.

See Rust.

lldb-vscode (MacOS)

An alternative is to to use lldb-vscode, which comes with llvm. Here's how:

Install llvm (e.g. with HomeBrew: brew install llvm)
Create a file named /path/to/vimspector/gadgets/macos/.gadgets.d/lldb-vscode.json:

{
  "adapters": {
    "lldb-vscode": {
      "variables": {
        "LLVM": {
          "shell": "brew --prefix llvm"
        }
      },
      "attach": {
        "pidProperty": "pid",
        "pidSelect": "ask"
      },
      "command": [
        "${LLVM}/bin/lldb-vscode"
      ],
      "env": {
        "LLDB_LAUNCH_FLAG_LAUNCH_IN_TTY": "YES"
      },
      "name": "lldb"
    }
  }
}

Rust

Rust is supported with any gdb/lldb-based debugger. So it works fine with vscode-cpptools and lldb-vscode above. However, support for rust is best in CodeLLDB.

./install_gadget.py --enable-rust or :VimspectorInstall CodeLLDB
Example: support/test/rust/vimspector_test

{
  "configurations": {
    "launch": {
      "adapter": "CodeLLDB",
      "filetypes": [ "rust" ],
      "configuration": {
        "request": "launch",
        "program": "${workspaceRoot}/target/debug/vimspector_test"
      }
    },
    "attach": {
      "adapter": "CodeLLDB",
      "filetypes": [ "rust", "c", "cpp", "jai" ],
      "configuration": {
        "request": "attach",
        "program": "${workspaceRoot}/${fileBasenameNoExtension}",
        "PID": "${PID}"
      }
    }
  }
}

Docs: https://github.com/vadimcn/vscode-lldb/blob/master/MANUAL.md
NOTE: The CodeLLDB manual assumes you are using VSCode (sigh) and therefore says things which don't work in vimspector, as there is a whole load of javascript nonesense behind every VSCode plugin. I can't possibly document all the wierdnesses, but the following are known

To use the "custom" launch, you can't use "request": "custom" - this is invalid. Instead use "request": "launch", "custom": true. Because reasons
All the integration with cargo is done in the vscode javascript madness, so is not supported.
The stuff about remote agents uses "request": custom; see the point about "custom" launch above
Source Mapping (i.e., enabling step-into for standard library functions) can be done by adding "sourceMap": { "from_path" : "to_path" }. "from_path" can be found in disassembly window by going up in the stack trace; "to_path" is just your locally installed standard library path for current toolchain.

Jai

Jai debugging works fine with any of the other native debuggers. I recommend CodeLLDB, but cpptools also works.

Example:

{
  "$schema": "https://puremourning.github.io/vimspector/schema/vimspector.schema.json",
  "adapters": {
    "gdb-with-build": {
      "extends": "vscode-cpptools",
      "variables": {
        "buildme": {
          "shell": "jai ${workspaceRoot}/build.jai"
        }
      }
    },
    "codelldb-with-build": {
      "extends": "CodeLLDB",
      "variables": {
        "buildme": {
          "shell": "jai ${workspaceRoot}/build.jai"
        }
      }
    }
  },
  "configurations": {
    "Run - gdb": {
      "adapter": "gdb-with-build",
      "filetypes": [ "jai" ],
      "configuration": {
        "request": "launch",
        "program": "${workspaceRoot}/${binaryName}",
        "args": [ "*${args}" ],
        "stopAtEntry": true,
        "stopOnEntry": true
      }
    },
    "Run - lldb": {
      "extends": "Run - gdb",
      "filetypes": [ "jai" ],
      "adapter": "codelldb-with-build"
    },
    "Attach - gdb": {
      "adapter": "vscode-cpptools",
      "filetypes": [ "jai" ],
      "configuration": {
        "request": "attach",
        "program": "${workspaceRoot}/${binaryName}",
        "processId": "${PID}"
      }
    },
    "Attach - lldb": {
      "extends": "Attach - gdb",
      "filetypes": [ "jai" ],
      "adapter": "CodeLLDB",
      "configuration": {
        "pid": "${PID}"
      }
    }
  }
}

Python

Python: debugpy
Install with install_gadget.py --enable-python or :VimspectorInstall debugpy, ideally requires a working compiler and the python development headers/libs to build a C python extension for performance.
NOTE: Debugpy no longer supports python 2. In order to continue to debug python 2 applications, use the debugpy-python2 adapter after installing the debugpy-python2 gadget.
Full options: https://github.com/microsoft/debugpy/wiki/Debug-configuration-settings

{
  "configurations": {
    "<name>: Launch": {
      "adapter": "debugpy",
      "filetypes": [ "python" ],
      "configuration": {
        "name": "<name>: Launch",
        "type": "python",
        "request": "launch",
        "cwd": "<working directory>",
        "python": "/path/to/python/interpreter/to/use",
        "stopOnEntry": true,
        "console": "externalTerminal",
        "debugOptions": [],
        "program": "<path to main python file>"
      }
    }
    ...
  }
}

Python Remote Debugging

In order to use remote debugging with debugpy, you have to connect Vimspector directly to the application that is being debugged. This is easy, but it's a little different from how we normally configure things. Specifically, you need to:

Start your application with debugpy, specifying the --listen argument. See the debugpy documentation for details.
Use the built-in "multi-session" adapter. This just asks for the host/port to connect to. For example:

{
  "configurations": {
    "Python Attach": {
      "adapter": "multi-session",
      "filetypes": [ "python" ], // optional
      "configuration": {
        "request": "attach",
        "pathMappings": [
          // mappings here (optional)
        ]
      }
    }
  }
}

See details of the launch configuration for explanation of things like pathMappings.

Additional documentation, including how to do this when the remote machine can only be contacted via SSH are provided by debugpy.

Python Remote launch and attach

If you're feeling fancy, checkout the reference guide for an example of getting Vimspector to remotely launch and attach.

Python 2

In order to continue to debug python 2 applications, ensure that you install the debugpy-python2 gadget (e.g. --force-enable-python2 or :VimspectorInstall debugpy-python2), and then change your configuration to use:

{
  "configurations": {
    "Python Attach": {
      "adapter": "debugpy-python2",
      // ...
    }
  }
}

for examk

TCL

TCL (TclProDebug)

See my fork of TclProDebug for instructions.

C♯

C# - dotnet core

Install with install_gadget.py --force-enable-csharp or :VimspectorInstall netcoredbg

{
  "configurations": {
    "launch - netcoredbg": {
      "adapter": "netcoredbg",
      "filetypes": [ "cs", "fsharp", "vbnet" ], // optional
      "configuration": {
        "request": "launch",
        "program": "${workspaceRoot}/bin/Debug/netcoreapp2.2/csharp.dll",
        "args": [],
        "stopAtEntry": true,
        "cwd": "${workspaceRoot}",
        "env": {}
      }
    }
  }
}

Go

Go (delve dap)

Requires:

install_gadget.py --enable-go or :VimspectorInstall delve
go 1.16 or later (YMMV on earlier versions)

This uses the DAP support built in to the delve debugger

{
  "configurations": {
    "run": {
      "adapter": "delve",
      "filetypes": [ "go" ], // optional
      "variables": {
        // example, to disable delve's go version check
        // "dlvFlags": "--check-go-version=false"
      },
      "configuration": {
        "request": "launch",
        "program": "${fileDirname}",
        "mode": "debug"
      }
    }
  }
}

Use Variables to configure the following:

dlvFlags: (string) additional command line arguments to pass to delve

The debugger (delve) is launched in a terminal window so that you can see its output and pass input to the debuggee.

See vscode-go docs for full launch options. Yes, it seems that's the only place they are documented (apparently, they are not documented by delve itself).

The vscode-go docs also have useful troubleshooting information

Go (legacy vscode-go)

Requires:

install_gadget.py --enable-go or :VimspectorInstall vscode-go
Delve installed, e.g. go get -u github.com/go-delve/delve/cmd/dlv
Delve to be in your PATH, or specify the dlvToolPath launch option

NOTE: Vimspector uses the "legacy" vscode-go debug adapter rather than the "built-in" DAP support in Delve. You can track puremourning#186 for that.

{
  "configurations": {
    "run": {
      "adapter": "vscode-go",
      "filetypes": [ "go" ], // optional
      "configuration": {
        "request": "launch",
        "program": "${fileDirname}",
        "mode": "debug",
        "dlvToolPath": "$HOME/go/bin/dlv"
        // example, to disable delve's go version check
        // "dlvFlags": [ "--check-go-version=false" ]
      }
    }
  }
}

See the vscode-go docs for troubleshooting information

PHP

This uses the php-debug, see https://marketplace.visualstudio.com/items?itemName=felixfbecker.php-debug

Requires:

(optional) Xdebug helper for chrome https://chrome.google.com/webstore/detail/xdebug-helper/eadndfjplgieldjbigjakmdgkmoaaaoc
install_gadget.py --force-enable-php or :VimspectorInstall vscode-php-debug
configured php xdebug extension
nodejs for vscode-php-debug

zend_extension=xdebug.so
xdebug.remote_enable=on
xdebug.remote_handler=dbgp
xdebug.remote_host=localhost
xdebug.remote_port=9000

replace localhost with the ip of your workstation.

lazy alternative

zend_extension=xdebug.so
xdebug.remote_enable=on
xdebug.remote_handler=dbgp
xdebug.remote_connect_back=true
xdebug.remote_port=9000

.vimspector.json

{
  "configurations": {
    "Listen for XDebug": {
      "adapter": "vscode-php-debug",
      "filetypes": [ "php" ], // optional
      "configuration": {
        "name": "Listen for XDebug",
        "type": "php",
        "request": "launch",
        "port": 9000,
        "stopOnEntry": false,
        "pathMappings": {
          "/var/www/html": "${workspaceRoot}"
        }
      }
    },
    "Launch currently open script": {
      "adapter": "vscode-php-debug",
      "filetypes": [ "php" ], // optional
      "configuration": {
        "name": "Launch currently open script",
        "type": "php",
        "request": "launch",
        "program": "${file}",
        "cwd": "${fileDirname}",
        "port": 9000
      }
    }
  }
}

Debug web application

append XDEBUG_SESSION_START=xdebug to your query string

curl "http://localhost?XDEBUG_SESSION_START=xdebug"

or use the previously mentioned Xdebug Helper extension (which sets a XDEBUG_SESSION cookie)

Debug cli application

export XDEBUG_CONFIG="idekey=xdebug"
php <path to script>

JavaScript, TypeScript, etc.

Node.js

Requires:

install_gadget.py --force-enable-node
Options described here: https://github.com/microsoft/vscode-js-debug/blob/main/OPTIONS.md
Example: support/test/node/simple, support/test/node/multiprocess

{
  "configurations": {
    "run": {
      "adapter": "js-debug",
      "filetypes": [ "javascript", "typescript" ], // optional
      "configuration": {
        "request": "launch",
        "stopOnEntry": true,
        "console": "integratedTerminal",
        "program": "${workspaceRoot}/simple.js",
        "cwd": "${workspaceRoot}",
        "type": "pwa-node" // this is the default, but see below
      }
    }
  }
}

vscode-js-debug supports a number of different "types" and can do some stuff that may or may not work. The type field is sadly not documented, but the valid values are defined here in the DebugType enum.

Vimspector has only been tested with pwa-node type.

Note also that for some reason this debug adapter always forces us to start multiple debug sessions. For a user, that shouldn't change anything (other than perhaps a slightly confusing stack trace). But it does make things more complicated and so there may be subtle bugs.

Node.js (legacy)

NOTE: This configuration uses the deprecated legacy debug adapter and will be removed in future. Please update your configurations to use the js-debug adapter. You may be able to just change the adapter name.

Requires:

install_gadget.py --force-enable-node
For installation, a Node.js environment that is < node 12. I believe this is an incompatibility with gulp. Advice, use nvm with nvm install --lts 10; nvm use --lts 10; ./install_gadget.py --force-enable-node ...
Options described here: https://code.visualstudio.com/docs/nodejs/nodejs-debugging
Example: support/test/node/simple

{
  "configurations": {
    "run": {
      "adapter": "vscode-node",
      "filetypes": [ "javascript", "typescript" ], // optional
      "configuration": {
        "request": "launch",
        "protocol": "auto",
        "stopOnEntry": true,
        "console": "integratedTerminal",
        "program": "${workspaceRoot}/simple.js",
        "cwd": "${workspaceRoot}"
      }
    }
  }
}

Chrome/Firefox

This uses the chrome/firefox debugger (they are very similar), see https://marketplace.visualstudio.com/items?itemName=msjsdiag.debugger-for-chrome and https://marketplace.visualstudio.com/items?itemName=firefox-devtools.vscode-firefox-debug, respectively.

It allows you to debug scripts running inside chrome from within Vim.

./install_gadget.py --force-enable-chrome or :VimspectorInstall debugger-for-chrome
./install_gadget.py --force-enable-firefox or :VimspectorInstall debugger-for-firefox
Example: support/test/web

{
  "configurations": {
    "chrome": {
      "adapter": "chrome",
      "configuration": {
        "request": "launch",
        "url": "http://localhost:1234/",
        "webRoot": "${workspaceRoot}/www"
      }
    },
    "firefox": {
      "adapter": "firefox",
      "configuration": {
        "request": "launch",
        "url": "http://localhost:1234/",
        "webRoot": "${workspaceRoot}/www",
        "reAttach": true
      }
    }
  }
}

Java

Vimspector works well with the java debug server, which runs as a jdt.ls (Java Language Server) plugin, rather than a standalone debug adapter.

Vimspector is not in the business of running language servers, only debug adapters, so this means that you need a compatible Language Server Protocol editor plugin to use Java. I recommend YouCompleteMe, which has full support for jdt.ls, and most importantly a trivial way to load the debug adapter and to use it with Vimspector.

Hot code replace

When using the java debug server, Vimspector supports the hot code replace custom feature. By default, when the underlying class files change, vimspector asks the user if they wish to reload these classes at runtime.

This behaviour can be customised:

let g:vimspector_java_hotcodereplace_mode = 'ask' - the default, ask the user for each reload.
let g:vimspector_java_hotcodereplace_mode = 'always' - don't ask, always reload
let g:vimspector_java_hotcodereplace_mode = 'never' - don't ask, never reload

Usage with YouCompleteMe

Set up YCM for java.
Get Vimspector to download the java debug plugin: install_gadget.py --force-enable-java <other options...> or :VimspectorInstall java-debug-adapter
Configure Vimspector for your project using the vscode-java adapter, e.g.:

{
  "configurations": {
    "Java Attach": {
      "adapter": "vscode-java",
      "filetypes": [ "java" ],
      "configuration": {
        "request": "attach",
        "hostName": "${host}",
        "port": "${port}",
        "sourcePaths": [
          "${workspaceRoot}/src/main/java",
          "${workspaceRoot}/src/test/java"
        ]
      }
    }
  }
}

Tell YCM to load the debugger plugin. This should be the gadgets/<os> directory, not any specific adapter. e.g. in .vimrc

" Tell YCM where to find the plugin. Add to any existing values.
let g:ycm_java_jdtls_extension_path = [
  \ '</path/to/Vimspector/gadgets/<os>'
  \ ]

Create a mapping, such as <leader><F5> to start the debug server and launch vimspector, e.g. in ~/.vim/ftplugin/java.vim:

let s:jdt_ls_debugger_port = 0
function! s:StartDebugging()
  if s:jdt_ls_debugger_port <= 0
    " Get the DAP port
    let s:jdt_ls_debugger_port = youcompleteme#GetCommandResponse(
      \ 'ExecuteCommand',
      \ 'vscode.java.startDebugSession' )

    if s:jdt_ls_debugger_port == ''
       echom "Unable to get DAP port - is JDT.LS initialized?"
       let s:jdt_ls_debugger_port = 0
       return
     endif
  endif

  " Start debugging with the DAP port
  call vimspector#LaunchWithSettings( { 'DAPPort': s:jdt_ls_debugger_port } )
endfunction

nnoremap <silent> <buffer> <Leader><F5> :call <SID>StartDebugging()<CR>

You can then use <Leader><F5> to start debugging rather than just <F5>.

If you see "Unable to get DAP port - is JDT.LS initialized?", try running :YcmCompleter ExecuteCommand vscode.java.startDebugSession and note the output. If you see an error like ResponseFailedException: Request failed: -32601: No delegateCommandHandler for vscode.java.startDebugSession, make sure that:

Your YCM jdt.ls is actually working, see the YCM docs for troubleshooting
The YCM jdt.ls has had time to initialize before you start the debugger
That g:ycm_java_jdtls_extension_path is set in .vimrc or prior to YCM starting

For the launch arguments, see the vscode document.

Other LSP clients

See this issue for more background.

Lua

Lua is supported through local-lua-debugger-vscode. This debugger uses stdio to communicate with the running process, so calls to io.read will cause problems.

./install_gadget.py --enable-lua or :VimspectorInstall local-lua-debugger-vscode
Examples: support/test/lua/simple and support/test/lua/love

{
  "$schema": "https://puremourning.github.io/vimspector/schema/vimspector.schema.json#",
  "configurations": {
    "lua": {
      "adapter": "lua-local",
      "filetypes": [ "lua" ],
      "configuration": {
        "request": "launch",
        "type": "lua-local",
        "cwd": "${workspaceFolder}",
        "program": {
          "lua": "lua",
          "file": "${file}"
        }
      }
    },
    "luajit": {
      "adapter": "lua-local",
      "filetypes": [ "lua" ],
      "configuration": {
        "request": "launch",
        "type": "lua-local",
        "cwd": "${workspaceFolder}",
        "program": {
          "lua": "luajit",
          "file": "${file}"
        }
      }
    },
    "love": {
      "adapter": "lua-local",
      "filetypes": [ "love" ],
      "configuration": {
        "request": "launch",
        "type": "lua-local",
        "cwd": "${workspaceFolder}",
        "program": {
          "command": "love"
        },
        "args": ["${workspaceFolder}"]
      }
    }
  }
}

Other servers

Java - vscode-javac. This works, but is not as functional as Java Debug Server. Take a look at this comment for instructions.

See also the wiki which has community-contributed plugin files for some languages.

Customisation

There is very limited support for customisation of the UI.

Changing the default signs

Vimsector uses the following signs internally. If they are defined before Vimsector uses them, they will not be replaced. So to customise the signs, define them in your vimrc.

Sign	Description	Priority
`vimspectorBP`	Line breakpoint	9
`vimspectorBPCond`	Conditional line breakpoint	9
`vimspectorBPLog`	Logpoint	9
`vimspectorBPDisabled`	Disabled breakpoint	9
`vimspectorPC`	Program counter (i.e. current line)	200
`vimspectorPCBP`	Program counter and breakpoint	200
`vimspectorNonActivePC`	Program counter for non-focused thread	9
`vimspectorCurrentThread`	Focussed thread in stack trace view	200
`vimspectorCurrentFrame`	Current stack frame in stack trace view	200

The default symbols are the equivalent of something like the following:

sign define vimspectorBP            text=\ ● texthl=WarningMsg
sign define vimspectorBPCond        text=\ ◆ texthl=WarningMsg
sign define vimspectorBPLog         text=\ ◆ texthl=SpellRare
sign define vimspectorBPDisabled    text=\ ● texthl=LineNr
sign define vimspectorPC            text=\ ▶ texthl=MatchParen linehl=CursorLine
sign define vimspectorPCBP          text=●▶  texthl=MatchParen linehl=CursorLine
sign define vimspectorNonActivePC   linehl=DiffAdd
sign define vimspectorCurrentThread text=▶   texthl=MatchParen linehl=CursorLine
sign define vimspectorCurrentFrame  text=▶   texthl=Special    linehl=CursorLine

If the signs don't display properly, your font probably doesn't contain these glyphs. You can easily change them by defining the sign in your vimrc. For example, you could put this in your vimrc to use some simple ASCII symbols:

sign define vimspectorBP text=o             texthl=WarningMsg
sign define vimspectorBPCond text=o?        texthl=WarningMsg
sign define vimspectorBPLog text=!!         texthl=SpellRare
sign define vimspectorBPDisabled text=o!    texthl=LineNr
sign define vimspectorPC text=\ >           texthl=MatchParen
sign define vimspectorPCBP text=o>          texthl=MatchParen
sign define vimspectorCurrentThread text=>  texthl=MatchParen
sign define vimspectorCurrentFrame text=>   texthl=Special

Sign priority

Many different plugins provide signs for various purposes. Examples include diagnostic signs for code errors, etc. Vim provides only a single priority to determine which sign should be displayed when multiple signs are placed at a single line. If you are finding that other signs are interfering with vimspector's (or vice-versa), you can customise the priority used by vimspector by setting the following dictionary:

let g:vimspector_sign_priority = {
  \   '<sign-name>': <priority>,
  \ }

For example:

let g:vimspector_sign_priority = {
  \    'vimspectorBP':          3,
  \    'vimspectorBPCond':      3,
  \    'vimspectorBPLog':       3,
  \    'vimspectorBPDisabled':  3,
  \    'vimspectorNonActivePC': 3,
  \    'vimspectorPC':          999,
  \    'vimspectorPCBP':        999,
  \ }

All keys are optional. If a sign is not customised, the default priority it used (as shown above).

See :help sign-priority. The default priority is 10, larger numbers override smaller ones.

NOTE: The default vimspectorNonActivePC sign does not add any text to the sign column, it simply adds a line highlight so that you can see the lines where other threads or processes are currently stopped. As a result this sign normally should merge with any sign that adds a symbol (such as a breakpoint sign). Vim will only merge the properties of signs with the same priority, so if changing the default priorities, it's recommended that:

All the breakpoint signs (vimspectorBP, vimspectorBPCond, etc.) have the same priority.
You also set the vimspectorNonActivePC sign that same priority
Active PC ( vimspectorPC, vimspectorPCBP, etc.) have a higher priority.

Presentation Hints

NOTE: This customisation point is currently unsable and may change at any time.

Sometimes the Debug Adapter provides hints as to how the UI should display certain things. This includes stack frames, variables etc.

Vimspector provides a simple way to customise how these are displayed, by setting values in the dictionary g:vimsepctor_presentation_hint_hl.

The following keys are supported with the mentioned default highlight group.

Group	Key	Usage	Default
all	`normal`	anything not covered below	`Normal`
Stack trace	`emphasize`	emphasize sources in stack trace	`Title`
Stack trace	`deemphasize`	deemphasize sources in stack trace	`Conceal`
Stack trace	`label`	stack frames which are "labels", not representing actual frames	`NonText`
Stack trace	`subtle`	stack frames which are internal or not interesting	`Conceal`
Scopes	`arguments`	Function arguments scope	`Title`
Scopes	`locals`	Local variables scope	`Title`
Scopes	`registers`	Registers scope	`Title`
Variables	`property`	Function arguments scope	`Identifier`
Variables	`method`	Local variables scope	`Function`
Variables	`class`	Registers scope	`Type`
Variables	`data`	Registers scope	`String`

In addition, any value supplied in the DAP VariablePresentationHint can be set which will be used if supplied by the debug adapter.

A silly example; the defaults should probably be OK for most colour scehemes:

let g:vimspector_presentation_hint_hl = {
  \    'normal': 'Identifier',
  \    'label':  'Title',
  \ }

Changing the default window sizes

Please Note: This customisation API is unstable, meaning that it may change at any time. I will endeavour to reduce the impact of this and announce changes in Gitter.

The following options control the default sizes of the UI windows (all of them are numbers)

g:vimspector_sidebar_width (default: 50 columns): The width in columns of the left utility windows (variables, watches, stack trace)
g:vimspector_bottombar_height (default 10 lines): The height in rows of the output window below the code window.

Example:

let g:vimspector_sidebar_width = 75
let g:vimspector_bottombar_height = 15

Changing the terminal size

The terminal is typically created as a vertical split to the right of the code window, and that window is re-used for subsequent terminal buffers. The following control the sizing of the terminal window used for debuggee input/output when using Vim's built-in terminal.

g:vimspector_code_minwidth (default: 82 columns): Minimum number of columns to try and maintain for the code window when splitting to create the terminal window.
g:vimspector_terminal_maxwidth (default: 80 columns): Maximum number of columns to use for the terminal.
g:vimspector_terminal_minwidth (default: 10 columns): Minimum number of columns to use when it is not possible to fit g:vimspector_terminal_maxwidth columns for the terminal.

That's a lot of options, but essentially we try to make sure that there are at least g:vimspector_code_minwidth columns for the main code window and that the terminal is no wider than g:vimspector_terminal_maxwidth columns. g:vimspector_terminal_minwidth is there to ensure that there's a reasonable number of columns for the terminal even when there isn't enough horizontal space to satisfy the other constraints.

Example:

let g:vimspector_code_minwidth = 90
let g:vimspector_terminal_maxwidth = 75
let g:vimspector_terminal_minwidth = 20

Custom mappings while debugging

It's useful to be able to define mappings only while debugging and remove those mappings when debugging is complete. For this purpose, Vimspector provides 2 User autocommands:

VimspectorJumpedToFrame - triggered whenever a 'break' event happens, or when selecting a stack from to jump to. This can be used to create (for example) buffer-local mappings for any files opened in the code window.
VimspectorDebugEnded - triggered when the debug session is terminated (actually when Vimspector is fully reset)

An example way to use this is included in support/custom_ui_vimrc. In there, these autocommands are used to create buffer-local mappings for any files visited while debugging and to clear them when completing debugging. This is particularly useful for commands like <Plug>VimspectorBalloonEval which only make sense while debugging (and only in the code window). Check the commented section Custom mappings while debugging.

NOTE: This is a fairly advanced feature requiring some nontrivial vimscript. It's possible that this feature will be incorporated into Vimspector in future as it is a common requirement.

Pre-launch building strategies

In many cases you will want to rebuild your project before starting a new debugging session. Vimspector is not a task manager and implementing this functionality is out of the scope of this project. However, there are some strategies described in the community wiki to achieve similar functionality.

Disabling the WinBar

You can tell vimspector not to draw the WinBar (the toolbars in the code, variables, output, etc. windows) by setting:

let g:vimspector_enable_winbar=0

The WinBar is in any case not displayed if the mouse is not enabled.

Advanced UI customisation

Please Note: This customisation API is unstable, meaning that it may change at any time. I will endeavour to reduce the impact of this and announce changes in Gitter.

The above customisation of window sizes is limited intentionally to keep things simple. Vimspector also provides a way for you to customise the UI without restrictions, by running a User autocommand just after creating the UI or opening the terminal. This requires you to write some vimscript, but allows you to do things like:

Hide a particular window or windows
Move a particular window or windows
Resize windows
Have multiple windows for a particular buffer (say, you want 2 watch windows)
etc.

You can essentially do anything you could do manually by writing a little vimscript code.

The User autocommand is raised with pattern set with the following values:

VimspectorUICreated: Just after setting up the UI for a debug session
VimspectorTerminalOpened: Just after opening the terminal window for program input/output.

The following global variable is set up for you to get access to the UI elements: g:vimspector_session_windows. This is a dict with the following keys:

g:vimspector_session_windows.tabpage: The tab page for the session
g:vimspector_session_windows.variables: Window ID of the variables window, containing the vimspector.Variables buffer.
g:vimspector_session_windows.watches: Window ID of the watches window, containing the vimspector.Watches buffer.
g:vimspector_session_windows.stack_trace: Window ID of the stack trade window containing the vimspector.StackTrace buffer.
g:vimspector_session_windows.code: Window ID of the code window.
g:vimspector_session_windows.output: Window ID of the output window.

In addition, the following key is added when triggering the VimspectorTerminalOpened event:

g:vimspector_session_windows.terminal: Window ID of the terminal window

Customising the WinBar

You can even customise the WinBar buttons by simply running the usual menu (and unmenu) commands.

By default, Vimspector uses something a bit like this:

nnoremenu WinBar.■\ Stop :call vimspector#Stop( { 'interactive': v:false } )<CR>
nnoremenu WinBar.▶\ Cont :call vimspector#Continue()<CR>
nnoremenu WinBar.▷\ Pause :call vimspector#Pause()<CR>
nnoremenu WinBar.↷\ Next :call vimspector#StepOver()<CR>
nnoremenu WinBar.→\ Step :call vimspector#StepInto()<CR>
nnoremenu WinBar.←\ Out :call vimspector#StepOut()<CR>
nnoremenu WinBar.⟲: :call vimspector#Restart()<CR>
nnoremenu WinBar.✕ :call vimspector#Reset( { 'interactive': v:false } )<CR>

If you prefer a different layout or if the unicode symbols don't render correctly in your font, you can customise this in the VimspectorUICreated autocommand, for example:

func! CustomiseUI()
  call win_gotoid( g:vimspector_session_windows.code )
  " Clear the existing WinBar created by Vimspector
  nunmenu WinBar
  " Create our own WinBar
  nnoremenu WinBar.Kill :call vimspector#Stop( { 'interactive': v:true } )<CR>
  nnoremenu WinBar.Continue :call vimspector#Continue()<CR>
  nnoremenu WinBar.Pause :call vimspector#Pause()<CR>
  nnoremenu WinBar.Step\ Over  :call vimspector#StepOver()<CR>
  nnoremenu WinBar.Step\ In :call vimspector#StepInto()<CR>
  nnoremenu WinBar.Step\ Out :call vimspector#StepOut()<CR>
  nnoremenu WinBar.Restart :call vimspector#Restart()<CR>
  nnoremenu WinBar.Exit :call vimspector#Reset()<CR>
endfunction

augroup MyVimspectorUICustomistaion
  autocmd!
  autocmd User VimspectorUICreated call s:CustomiseUI()
augroup END

Example

There is some example code in support/custom_ui_vimrc showing how you can use the window IDs to modify various aspects of the UI using some basic vim commands, primarily win_gotoid function and the wincmd ex command.

To try this out vim -Nu support/custom_ui_vimrc <some file>.

Here's a rather smaller example. A simple way to use this is to drop it into a file named my_vimspector_ui.vim in ~/.vim/plugin (or paste into your vimrc):

" Set the basic sizes
let g:vimspector_sidebar_width = 80
let g:vimspector_code_minwidth = 85
let g:vimspector_terminal_minwidth = 75

function! s:CustomiseUI()
  " Customise the basic UI...

  " Close the output window
  call win_gotoid( g:vimspector_session_windows.output )
  q
endfunction

function s:SetUpTerminal()
  " Customise the terminal window size/position
  " For some reasons terminal buffers in Neovim have line numbers
  call win_gotoid( g:vimspector_session_windows.terminal )
  set norelativenumber nonumber
endfunction

augroup MyVimspectorUICustomistaion
  autocmd!
  autocmd User VimspectorUICreated call s:CustomiseUI()
  autocmd User VimspectorTerminalOpened call s:SetUpTerminal()
augroup END

FAQ

Q: Does it work with this language? A: Probably, but it won't necessarily be easy to work out what to put in the .vimspector.json. As you can see above, some of the servers aren't really editor agnostic, and require very-specific unique handling. See the wiki for details on additional language support
How do I stop it starting a new Terminal.app on macOS? See this comment
Can I specify answers to the annoying questions about exception breakpoints in my .vimspector.json ? Yes, see here.
Do I have to specify the file to execute in .vimspector.json, or could it be the current vim file? You don't need to. You can specify $file for the current active file. See here for complete list of replacements in the configuration file.
You allow comments in .vimspector.json, but Vim highlights these as errors, do you know how to make this not-an-error? Yes, put this in ~/.vim/after/syntax/json.vim:

syn region jsonComment start="/\*" end="\*/"
hi link jsonCommentError Comment
hi link jsonComment Comment

What is the difference between a gadget and an adapter? A gadget is something you install with :VimspectorInstall or install_gadget.py, an adapter is something that Vimspector talks to (actually it's the Vimspector config describing that thing). These are usually one-to-one, but in theory a single gadget can supply multiple adapter configs. Typically this happens when a gadget supplies different adapter config for, say remote debugging, or debugging in a container, etc.
The signs and winbar display funny symbols. How do I fix them? See this and this
What's this telemetry stuff all about? Are you sending my data to evil companies? Debug adapters (for some reason) send telemetry data to clients. Vimspector simply displays this information in the output window. It does not and will not ever collect, use, forward or otherwise share any data with any third parties.
Do I have to put a .vimspector.json in the root of every project? No, you can use g:vimspector_adapters and g:vimspector_configurations or put all of your adapter and debug configs in a single directory if you want to, but note the caveat that ${workspaceRoot} won't be calculated correctly in that case. The vimsepctor author uses this a lot
I'm confused about remote debugging configuration, can you explain it? eh... kind of. Reference: https://puremourning.github.io/vimspector/configuration.html#remote-debugging-support. Some explanations here too: puremourning#478 (comment)
I'm trying to debug a Django (django?) project and it's not working. Can you help? sure, check this link which has a working example. Or google it.
Can vimspector build my code before debugging it? Can I deploy it to a remote host before debugging it? No, not really. Vimspector is just a debugger, not a task system or build automation system - there are other tools for that. There is however a hack you can use - you can use a 'shell' variable to execute a command and just discard the output. Other options are discussed in this issue
It's annoying to manually type in the PID when attaching. Do you have a PID picker? There's no PID picker in vimspector at the moment, but you could write something and wrap vimspector#LaunchWithSettings( { 'ThePID': the_pid_i_picked } ). Alternatively, you could use a shell variable to guess the PID, like this (which runs pgrep vim | sort | tail -1 to get the 'highest' PID of the command to be debugged (NOTE: this is for debugging Vim. replace with something appropriate to your actual use case. If this doesn't make sense to you, you might be better off just typing in the PID).

    "Attach: max PID": {
      "adapter": "CodeLLDB",
      "variables": {
        "pid": {
          "shell": [
            "/bin/bash",
            "-c",
            "pgrep vim | sort | tail -1"
          ]
        }
      },
      "configuration": {
        "request": "attach",
        "program": "${workspaceRoot}/src/vim",
        "expressions": "native",
        "stopOnEntry#json": "${StopOnEntry:true}",
        "pid": "${pid}"
      }
    },

Example g:vimspector_adapters and g:vimspector_configurations:

let g:vimspector_adapters = #{
      \   test_debugpy: #{ extends: 'debugpy' }
      \ }

let g:vimspector_configurations = {
      \ "test_debugpy_config": {
      \   "adapter": "test_debugpy",
      \   "filetypes": [ "python" ],
      \   "configuration": {
      \     "request": "launch",
      \     "type": "python",
      \     "cwd": "${fileDirname}",
      \     "args": [],
      \     "program": "${file}",
      \     "stopOnEntry": v:false,
      \     "console": "integratedTerminal",
      \     "integer": 123,
      \   },
      \   "breakpoints": {
      \     "exception": {
      \       "raised": "N",
      \       "uncaught": "",
      \       "userUnhandled": ""
      \     }
      \   }
      \ } }

Name		Name	Last commit message	Last commit date
Latest commit History 1,940 Commits
.github		.github
autoload		autoload
compiler		compiler
doc		doc
docs		docs
plugin		plugin
python3/vimspector		python3/vimspector
support		support
syntax		syntax
tests		tests
.gitignore		.gitignore
.gitmodules		.gitmodules
.lgtm.yml		.lgtm.yml
.mergify.yml		.mergify.yml
.vimspector.json		.vimspector.json
.vintrc.yml		.vintrc.yml
.ycm_extra_conf.py		.ycm_extra_conf.py
CODE_OF_CONDUCT.md		CODE_OF_CONDUCT.md
CONTRIBUTING.md		CONTRIBUTING.md
LICENCE		LICENCE
Makefile		Makefile
README.md		README.md
dev_requirements.txt		dev_requirements.txt
gh-md-toc		gh-md-toc
install_gadget.py		install_gadget.py
make_package		make_package
run_tests		run_tests
tox.ini		tox.ini
update-schema-docs		update-schema-docs
update-vim-docs		update-vim-docs

License

bprb/vimspector

Folders and files

Latest commit

History

Repository files navigation

vimspector - A multi language graphical debugger for Vim

Features and Usage

Supported debugging features

Supported languages

Other languages

Installation

Quick Start

Method 1: Using a release tarball and Vim packages

Method 2: Using a repo clone, Vim packages and select gadgets to be installed

Method 3: Using a plugin manager

Dependencies

Neovim limitations

Windows differences

Trying it out

Cloning the plugin

Install some gadgets

VimspectorInstall and VimspectorUpdate commands

install_gadget.py

Manual gadget installation

The gadget directory

Upgrade

About

Background

What Vimspector is not

Status

Experimental

Motivation

License

Sponsorship

Mappings

Visual Studio / VSCode

Human Mode

Usage and API

Launch and attach by PID:

Picking a PID

Launch with options

Debug configuration selection

Get configurations

Breakpoints

Breakpoints Window

Line breakpoints

Conditional breakpoints and logpoints

Exception breakpoints

API Summary

Instruction breakpoints

Clear breakpoints

Run to Cursor

Go to current line

Save and restore

Stepping

Variables and scopes

Variable or selection hover evaluation

Watches

Watch autocompletion

Disassembly

Dump memory

Stack Traces

Child sessions

Program Output

Console

Console autocompletion

Log View

Closing debugger

Terminate debuggee

Multiple debugging sessions

Debug profile configuration

C, C++, Rust, etc.

Data visualization / pretty printing

C++ Remote debugging

C++ Remote launch and attach

Rust

Jai

Python

Python Remote Debugging

Packages