This repository contains the Rocket chip generator necessary to instantiate the RISC-V Rocket Core. For more information on Rocket Chip, please consult our technical report.
- Quick instructions for those who want to dive directly into the details without knowing exactly what's in the repository.
- What's in the Rocket chip generator repository?
- How should I use the Rocket chip generator?
- How can I parameterize my Rocket chip?
- Contributors
$ git clone https://github.com/ucb-bar/rocket-chip.git
$ cd rocket-chip
$ git submodule update --init
To build the rocket-chip repository, you must point the RISCV environment variable to your riscv-tools installation directory.
$ export RISCV=/path/to/riscv/toolchain/installation
The riscv-tools repository is already included in rocket-chip as a git submodule. You must build this version of riscv-tools:
$ cd rocket-chip/riscv-tools
$ git submodule update --init --recursive
$ export RISCV=/path/to/install/riscv/toolchain
$ ./build.sh
$ ./build-rv32ima.sh (if you are using RV32).
For more information (or if you run into any issues), please consult the riscv-tools/README.
First, to build the C simulator:
$ cd emulator
$ make
Or to build the VCS simulator:
$ cd vsim
$ make
In either case, you can run a set of assembly tests or simple benchmarks (Assuming you have N cores on your host system):
$ make -jN run-asm-tests
$ make -jN run-bmark-tests
To build a C simulator that is capable of VCD waveform generation:
$ cd emulator
$ make debug
And to run the assembly tests on the C simulator and generate waveforms:
$ make -jN run-asm-tests-debug
$ make -jN run-bmark-tests-debug
To generate FPGA- or VLSI-synthesizable verilog (output will be in vsim/generated-src):
$ cd vsim
$ make verilog
If you are trying to keep your repo up to date with this github repo, you also need to keep the submodules and tools up to date.
$ # Get the newest versions of the files in this repo
$ git pull origin master
$ # Make sure the submodules have the correct versions
$ git submodule update --init --recursive
If riscv-tools version changes, you should recompile and install riscv-tools according to the directions in the riscv-tools/README.
$ cd riscv-tools
$ ./build.sh
$ ./build-rv32ima.sh (if you are using RV32)
The rocket-chip repository is a meta-repository that points to several sub-repositories using Git submodules. Those repositories contain tools needed to generate and test SoC designs. This respository also contains code that is used to generate RTL. Hardware generation is done using Chisel, a hardware construction language embedded in Scala. The rocket-chip generator is a Scala program that invokes the Chisel compiler in order to emit RTL describing a complete SoC. The following sections describe the components of this repository.
Git submodules allow you to keep a Git repository as a subdirectory of another Git repository. For projects being co-developed with the Rocket Chip Generator, we have often found it expedient to track them as submodules, allowing for rapid exploitation of new features while keeping commit histories separate. As submoduled projects adopt stable public APIs, we transition them to external dependencies. Here are the submodules that are currently being tracked in the rocket-chip repository:
- chisel3 (https://github.com/ucb-bar/chisel3): The Rocket Chip Generator uses Chisel to generate RTL.
- firrtl (https://github.com/ucb-bar/firrtl): Firrtl (Flexible Internal Representation for RTL) is the intermediate representation of RTL constructions used by Chisel3. The Chisel3 compiler generates a Firrtl representation, from which the final product (Verilog code, C code, etc) is generated.
- hardfloat (https://github.com/ucb-bar/berkeley-hardfloat): Hardfloat holds Chisel code that generates parameterized IEEE 754-2008 compliant floating-point units used for fused multiply-add operations, conversions between integer and floating-point numbers, and conversions between floating-point conversions with different precision.
- riscv-tools (https://github.com/riscv/riscv-tools): We tag a version of the RISC-V software ecosystem that works with the RTL committed in this repository.
- torture (https://github.com/ucb-bar/riscv-torture): This module is used to generate and execture constrained random instruction streams that can be used to stress-test both the core and uncore portions of the design.
In addition to submodules that track independent git repositories, the rocket-chip code base is itself factored into a number of Scala packages. These packages are all found within the src/main/scala directory. Some of these packages provide Scala utilities for generator configuration, while other contain the actual Chisel RTL generators themselves. Here is a brief description of what can be found in each package:
- config This utility package provides Scala interfaces for configuring a generator via a dynamically-scoped parameterization library.
- coreplex This RTL package generates a complete coreplex by gluing together a variety of other components, including tiled Rocket cores, an L1-to-L2 network, L2 coherence agents, and internal devices such as the debug unit and interrupt handlers.
- diplomacy This utility package extends Chisel by allowing for two-phase hardware elaboration, in which certain parameters are dynamically negotiated between modules.
- groundtest This RTL package generates synthesizeable hardware testers that emit randomized memory access streams in order to stress-tests the uncore memory hierarchy.
- junctions This RTL package provides definitions for bus interfaces and generates a variety of protocol converters.
- regmapper This utility package generates slave devices with a standardized interface for accessing their memory-mapped registers.
- rocket This RTL package generates the Rocket in-order pipelined core, as well as the L1 instruction and data caches. This library is intended to be used by a chip generator that instantiates the core within a memory system and connects it to the outside world.
- uncore This RTL package generates a variety of uncore logic and devices, such as such as the L2 coherence hub and Debug modules, as well as defining their interfaces and protocols. Contains implementations of both TileLink and AXI4.
- unittest This utility package contains a framework for generateing synthesizeable hardware testers of individual modules.
- rocketchip This top-level RTL package instantiates a coreplex and drops in any additional externally-facing peripheral devices. It also includes clock-crossers and converters from TileLink to external bus protocols (e.g. AXI or AHB).
- util This utility package provides a variety of common Scala and Chisel constructs that are re-used across multiple other packages,
Outside of Scala, we also provide a variety of resources to create a complete SoC implementation and test the generated designs.
- bootrom Sources for the first-stage bootloader included in the BootROM.
- csrc C sources for use with Verilator simulation.
- emulator Directory in which Verilator simulations are compiled and run.
- project Directory used by SBT for Scala compilation and build.
- regression Defines continuous integration and nightly regression suites.
- scripts Utilities for parsing the output of simulations or manipulating the contents of source files.
- vsim Directory in which Synopsys VCS simulations are compiled and run.
- vsrc Verilog sources containing interfaces, harnesses and VPI.
See this description of how to create you own top-level design with custom devices.
Chisel can generate code for three targets: a high-performance cycle-accurate Verilator, Verilog optimized for FPGAs, and Verilog for VLSI. The rocket-chip generator can target all three backends. You will need a Java runtime installed on your machine, since Chisel is overlaid on top of Scala. Chisel RTL (i.e. rocket-chip source code) is a Scala program executing on top of your Java runtime. To begin, ensure that the ROCKETCHIP environment variable points to the rocket-chip repository.
$ git clone https://github.com/ucb-bar/rocket-chip.git
$ cd rocket-chip
$ export ROCKETCHIP=`pwd`
$ git submodule update --init
$ cd riscv-tools
$ git submodule update --init --recursive riscv-tests
Before going any further, you must point the RISCV environment variable to your riscv-tools installation directory. If you do not yet have riscv-tools installed, follow the directions in the riscv-tools/README.
export RISCV=/path/to/install/riscv/toolchain
Otherwise, you will see the following error message while executing any command in the rocket-chip generator:
*** Please set environment variable RISCV. Please take a look at README.
Your next step is to get the Verilator working. Assuming you have N cores on your host system, do the following:
$ cd $ROCKETCHIP/emulator
$ make -jN run
By doing so, the build system will generate C++ code for the cycle-accurate emulator, compile the emulator, compile all RISC-V assembly tests and benchmarks, and run both tests and benchmarks on the emulator. If make finished without any errors, it means that the generated Rocket chip has passed all assembly tests and benchmarks!
You can also run assembly tests and benchmarks separately:
$ make -jN run-asm-tests
$ make -jN run-bmark-tests
To generate vcd waveforms, you can run one of the following commands:
$ make -jN run-debug
$ make -jN run-asm-tests-debug
$ make -jN run-bmark-tests-debug
Or call out individual assembly tests or benchmarks:
$ make output/rv64ui-p-add.out
$ make output/rv64ui-p-add.vcd
Now take a look in the emulator/generated-src directory. You will find Chisel generated C++ code.
$ ls $ROCKETCHIP/emulator/generated-src
Top.DefaultConfig-0.cpp
Top.DefaultConfig-0.o
Top.DefaultConfig-1.cpp
Top.DefaultConfig-1.o
Top.DefaultConfig-2.cpp
Top.DefaultConfig-2.o
Top.DefaultConfig-3.cpp
Top.DefaultConfig-3.o
Top.DefaultConfig-4.cpp
Top.DefaultConfig-4.o
Top.DefaultConfig-5.cpp
Top.DefaultConfig-5.o
Top.DefaultConfig.cpp
Top.DefaultConfig.h
emulator.h
emulator_api.h
emulator_mod.h
Also, output of the executed assembly tests and benchmarks can be found at emulator/output/*.out. Each file has a cycle-by-cycle dump of write-back stage of the pipeline. Here's an excerpt of emulator/output/rv64ui-p-add.out:
C0: 483 [1] pc=[00000002138] W[r 3=000000007fff7fff][1] R[r 1=000000007fffffff] R[r 2=ffffffffffff8000] inst=[002081b3] add s1, ra, s0
C0: 484 [1] pc=[0000000213c] W[r29=000000007fff8000][1] R[r31=ffffffff80007ffe] R[r31=0000000000000005] inst=[7fff8eb7] lui t3, 0x7fff8
C0: 485 [0] pc=[00000002140] W[r 0=0000000000000000][0] R[r 0=0000000000000000] R[r 0=0000000000000000] inst=[00000000] unknown
The first [1] at cycle 483, core 0, shows that there's a valid instruction at PC 0x2138 in the writeback stage, which is 0x002081b3 (add s1, ra, s0). The second [1] tells us that the register file is writing r3 with the corresponding value 0x7fff7fff. When the add instruction was in the decode stage, the pipeline had read r1 and r2 with the corresponding values next to it. Similarly at cycle 484, there's a valid instruction (lui instruction) at PC 0x213c in the writeback stage. At cycle 485, there isn't a valid instruction in the writeback stage, perhaps, because of a instruction cache miss at PC 0x2140.
You can generate synthesizable Verilog with the following commands:
$ cd $ROCKETCHIP/vsim
$ make verilog CONFIG=DefaultFPGAConfig
The Verilog used for the FPGA tools will be generated in vsim/generated-src. Please proceed further with the directions shown in the README of the fpga-zynq repository.
If you have access to VCS, you will be able to run assembly tests and benchmarks in simulation with the following commands (again assuming you have N cores on your host machine):
$ cd $ROCKETCHIP/vsim
$ make -jN run CONFIG=DefaultFPGAConfig
The generated output looks similar to those generated from the emulator. Look into vsim/output/*.out for the output of the executed assembly tests and benchmarks.
You can generate Verilog for your VLSI flow with the following commands:
$ cd $ROCKETCHIP/vsim
$ make verilog
Now take a look at vsim/generated-src, and the contents of the Top.DefaultConfig.conf file:
$ cd $ROCKETCHIP/vsim/generated-src
Top.DefaultConfig.conf
Top.DefaultConfig.prm
Top.DefaultConfig.v
consts.DefaultConfig.vh
$ cat $ROCKETCHIP/vsim/generated-src/*.conf
name MetadataArray_tag_arr depth 128 width 84 ports mwrite,read mask_gran 21
name ICache_tag_array depth 128 width 38 ports mrw mask_gran 19
name DataArray_T6 depth 512 width 128 ports mwrite,read mask_gran 64
name HellaFlowQueue_ram depth 32 width 133 ports write,read
name ICache_T157 depth 512 width 128 ports rw
The conf file contains information for all SRAMs instantiated in the
flow. If you take a close look at the
Similarly, if you have access to VCS, you can run assembly tests and benchmarks with the following commands (again assuming you have N cores on your host machine):
$ cd $ROCKETCHIP/vsim
$ make -jN run
The generated output looks similar to those generated from the emulator. Look into vsim/output/*.out for the output of the executed assembly tests and benchmarks.
By now, you probably figured out that all generated files have a configuration name attached, e.g. DefaultConfig. Take a look at src/main/scala/rocketchip/Configs.scala. Search for NSets and NWays defined in BaseConfig. You can change those numbers to get a Rocket core with different cache parameters. For example, by changing L1I, NWays to 4, you will get a 32KB 4-way set-associative L1 instruction cache rather than a 16KB 2-way set-associative L1 instruction cache.
Further down, you will be able to see two FPGA configurations: DefaultFPGAConfig and DefaultFPGASmallConfig. DefaultFPGAConfig inherits from BaseConfig, but overrides the low-performance memory port (i.e., backup memory port) to be turned off. This is because the high-performance memory port is directly connected to the high-performance AXI interface on the ZYNQ FPGA. DefaultFPGASmallConfig inherits from DefaultFPGAConfig, but changes the cache sizes, disables the FPU, turns off the fast early-out multiplier and divider, and reduces the number of TLB entries (all defined in SmallConfig). This small configuration is used for the Zybo FPGA board, which has the smallest ZYNQ part.
Towards the end, you can also find that ExampleSmallConfig inherits all parameters from BaseConfig but overrides the same parameters of SmallConfig.
Now take a look at vsim/Makefile. Search for the CONFIG variable. By default, it is set to DefaultConfig. You can also change the CONFIG variable on the make command line:
$ cd $ROCKETCHIP/vsim
$ make -jN CONFIG=ExampleSmallConfig run-asm-tests
Or, even by defining CONFIG as an environment variable:
$ export CONFIG=ExampleSmallConfig
$ make -jN run-asm-tests
This parameterization is one of the many strengths of processor generators written in Chisel, and will be more detailed in a future blog post, so please stay tuned.
To override specific configuration items, such as the number of external interrupts, you can create your own Configuration(s) and compose them with Config's ++ operator
class WithNExtInterrupts extends Config (nExt: Int) {
(pname, site, here) => pname match {
case (NExtInterrupts => nExt)
}
}
class MyConfig extends Config (new WithNExtInterrupts(16) ++ new DefaultSmallConfig)
Then you can build as usual with CONFIG=MyConfig.
Can be found here.
If used for research, please cite Rocket Chip by the technical report:
Krste Asanović, Rimas Avižienis, Jonathan Bachrach, Scott Beamer, David Biancolin, Christopher Celio, Henry Cook, Palmer Dabbelt, John Hauser, Adam Izraelevitz, Sagar Karandikar, Benjamin Keller, Donggyu Kim, John Koenig, Yunsup Lee, Eric Love, Martin Maas, Albert Magyar, Howard Mao, Miquel Moreto, Albert Ou, David Patterson, Brian Richards, Colin Schmidt, Stephen Twigg, Huy Vo, and Andrew Waterman, The Rocket Chip Generator, Technical Report UCB/EECS-2016-17, EECS Department, University of California, Berkeley, April 2016