Overview. NuttX includes an optional, scalable file system. This file-system may be omitted altogether; NuttX does not depend on the presence of any file system.
Pseudo Root File System. A simple in-memory, pseudo file
system can be enabled by default. This is an in-memory file
system because it does not require any storage medium or block
driver support. Rather, file system contents are generated
on-the-fly as referenced via standard file system operations
(open, close, read, write, etc.). In this sense, the file system
is pseudo file system (in the same sense that the Linux
/proc file system is also referred to as a pseudo file
system).
Any user supplied data or logic can be accessed via the
pseudo-file system. Built in support is provided for character and
block drivers in the /dev pseudo file
system directory.
Mounted File Systems The simple in-memory file system can be
extended my mounting block devices that provide access to true
file systems backed up via some mass storage device. NuttX
supports the standard mount() command that allows a block
driver to be bound to a mountpoint within the pseudo file system
and to a file system. At present, NuttX supports the standard VFAT
and ROMFS file systems, a special, wear-leveling NuttX FLASH File
System (NXFFS), as well as a Network File System client (NFS
version 3, UDP).
Comparison to Linux From a programming perspective, the NuttX file system appears very similar to a Linux file system. However, there is a fundamental difference: The NuttX root file system is a pseudo file system and true file systems may be mounted in the pseudo file system. In the typical Linux installation by comparison, the Linux root file system is a true file system and pseudo file systems may be mounted in the true, root file system. The approach selected by NuttX is intended to support greater scalability from the very tiny platform to the moderate platform.
Summary
TXTABLE - A text based partition table stored in last eraseblock (or in romdisk for backup).
- The 1st line must be "Magic+Version", current is "TXTABLE0".
- The 2nd and remaining lines are partition entries(min: one) in format: "%s %zx %zx"(means name, size and offset (byte)(in hex)).
- Size or offset can be default zero(means zero(for 1st entry) or caculate(for others)), and will be caculated by the parser refs to previous and next entries.
- The last eraseblock will be registered as pseudo partition named "txtable". If the last eraseblock included by the last real partition, it will be excluded from.
To avoid problems of PTABLE: In case of multiple NuttX binary, partition table maybe out of sync.
And it's easier:
- Text format with simple rules(name + size + offset).
- Size or offset can be default(caculated refs to previous and next entries).
- Support backup table(eg. /etc/txtable.txt in ROMFS)
Size / Offset can be automatically calculated, case:
- The offset of the first entry is zero, and the offset of other entries is zero: automatic calculation;
- The size of the last entry is zero: fill to the end of the entire Flash (keep the last eraseblock); the size of other entries is zero: automatically calculated(next.offset - current.offset);
- Typical case 1: The size of all entries is zero (calculated automatically), and the offset is non-zero;
- Typical case 2: The size and offset of a certain entry are all zero, but the size and offset of two adjacent entries are all non-zero;
Examples
Both size and offset of "partition6" are zero, gap exists between "partition7" and "data", and not reserve last eraseblock.
txtable.txt
TXTABLE0 partition1 0x6C000 0x4000 partition2 0x10000 0x70000 partition3 0x80000 0x80000 partition4 0x80000 0x100000 partition5 0x280000 0x180000 partition6 0 0 partition7 0x10000 0x480000 data 0 0x500000
Parsed
Reserved last eraseblock, and gap between partition7 and data is kept.Format: name, offset, size/dev/partition1 offset 0x00004000, size 0x0006c000 /dev/partition2 offset 0x00070000, size 0x00010000 /dev/partition3 offset 0x00080000, size 0x00080000 /dev/partition4 offset 0x00100000, size 0x00080000 /dev/partition5 offset 0x00180000, size 0x00280000 /dev/partition6 offset 0x00400000, size 0x00080000 /dev/partition7 offset 0x00480000, size 0x00010000 /dev/data offset 0x00500000, size 0x00aff000 /dev/txtable offset 0x00fff000, size 0x00001000
More than one not set size or offset
txtable.txt
TXTABLE0 partition1 0 0x4000 partition2 0 0x70000 partition3 0 0x80000 partition4 0x80000 0x100000 partition5 0x280000 0 partition6 0 0 partition7 0x10000 0x480000 data 0 0x500000
Parsed
Size of partition[2,3,4,6] and data are caculated, and gap between partition7 and data is kept./dev/partition1 offset 0x00004000, size 0x0006c000 /dev/partition2 offset 0x00070000, size 0x00010000 /dev/partition3 offset 0x00080000, size 0x00080000 /dev/partition4 offset 0x00100000, size 0x00080000 /dev/partition5 offset 0x00180000, size 0x00280000 /dev/partition6 offset 0x00400000, size 0x00080000 /dev/partition7 offset 0x00480000, size 0x00010000 /dev/data offset 0x00500000, size 0x00aff000 /dev/txtable offset 0x00fff000, size 0x00001000
Only one partition entry, and size not spec
txtable.txt
TXTABLE0 partition1 0x0 0x4000
Parsed
The last eraseblock was kept, and size is correct./dev/partition1 offset 0x00004000, size 0x00ffb000 /dev/txtable offset 0x00fff000, size 0x00001000
Blank line && New line delim
txtable.txt
New line: CR + LF / LF.Additional char/string after "%s %zx %zx".TXTABLE0 partition1 0x6C000 0x4000 partition2 0 0x70000 partition3 0 0x80000 partition4 0 0x100000 partition5 0x280000 0x180000 partition6 0x80000 0x400000 # String between "%s %zx %zx" and "LF" will be ignored. partition7 0x10000 0x480000 # Comments: This is the 7th partition. data 0 0x500000 EOF
Parsed
Blank lines are ignored, and new line of both "LF" or "CRLF" are parsed. String between "%s %zx %zx" and "LF" will be ignored(eg. CR, or some comments)./dev/partition1 offset 0x00004000, size 0x0006c000 /dev/partition2 offset 0x00070000, size 0x00010000 /dev/partition3 offset 0x00080000, size 0x00080000 /dev/partition4 offset 0x00100000, size 0x00080000 /dev/partition5 offset 0x00180000, size 0x00280000 /dev/partition6 offset 0x00400000, size 0x00080000 /dev/partition7 offset 0x00480000, size 0x00010000 /dev/data offset 0x00500000, size 0x00aff000 /dev/txtable offset 0x00fff000, size 0x00001000