ZBX-APC-UPS

This template use the APC-POWERNET-MIB to discover and manage APC UPS devices.

Items

• Contact (Populates host inventory field Contact)
• Device Location (Populates host inventory field Location)
• Device Manufacturer Name (Populates host inventory field Tag)
• Device Name (Populates host inventory field Name)
• Device reachability using ICMP
• Device Serail Number (Populates host inventory field Serial Number A)
• Software Version (Populates host inventory field OS)
• Software Version (full) (Populates host inventory field OS (Full details))
• UPS battery capacity
• UPS battery status
• UPS battery temperature
• UPS current load
• UPS input voltage
• UPS output frequency
• UPS output load
• UPS output voltage
• UPS replace battery indicator
• UPS run time remaining
• UPS status
• UPS time on battery
• Uptime

Triggers

• [DISASTER] => Run time remaining critical level
• [DISASTER] => Replace battery
• [DISASTER] => High battery temperature
• [DISASTER] => Output load too high
• [DISASTER] => Loss of input power
• [HIGH] => Run time remaining low
• [WARNING] => Output load too high

Graphs

• Battery status
• UPS load
• UPS temperature
• UPS voltage

Installation

1. Install echo.something in the ExternalScripts directory of your Zabbix server and/or proxy. Check your zabbix_server.conf and/or zabbix_proxy.conf if in doubt.
2. Then chmod a+x echo.something
3. Add a value mapping named apcBatteryStatus with the following values:

• 1 => unknown
• 2 => batteryNormal
• 3 => batteryLow

4. Add a value mapping named apcBatteryReplacementStatus with the following values:

• 1 => unknown
• 2 => notInstalled
• 3 => ok
• 4 => failed
• 5 => highTemperature
• 6 => replaceImmediately
• 7 => lowCapacity

5. Add a value mapping named apcStatuswith the following values:

• 1 => unknown
• 2 => onLine
• 3 => onBattery
• 4 => onSmartBoost
• 5 => timedSleeping
• 6 => softwareBypass
• 7 => off
• 8 => rebooting
• 9 => switchedBypass
• 10 => hardwareFailureBypass
• 11 => sleepingUntilPowerReturn
• 12 => onSmartTrim

4. Import zbx-apc-ups.xml file into Zabbix.
5. Add to your host the {$SNMP_COMMUNITY} macro with your SNMP community as value.
6. Configure Host Inventory to Automatic for your host.
7. Associate ZBX-APC-UPS template to the host.

Requirements

This template was tested for Zabbix 2.0.0 and higher.

echo.something 1.0

This template use this script to echo "APC" as Device Manufacturer Name for Host Inventory.

License

This template is distributed under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

Copyright

Copyright (c) Jean-Jacques Martrès

Authors

Jean-Jacques Martrès (jjmartres |at| gmail |dot| com)