forked from jal2/WAG160Nv2
-
Notifications
You must be signed in to change notification settings - Fork 6
A tool to upload a firmware into a Sercomm router which entered download mode.
License
danitool/sercomm-recovery
Folders and files
Name | Name | Last commit message | Last commit date | |
---|---|---|---|---|
Repository files navigation
This tool allows you to flash firmware into a Linksys WAG160Nv2 after it was put into download mode, e.g. if the original firmware was destroyed. It runs under Linux only, you must be root to execute it. 1. Compile ========== gcc -o sercomm sercomm.c 2. Enter Download Mode ====================== - power off the device - press the reset button - power on while holding the reset button - wait until the power LED flashes red/green, release the reset button 3. Run the Tool =============== Connect a LAN port to a NIC of the host, e.g. to eth1. 3.1. Probe the Device --------------------- ./sercomm eth1 This should list some info about all device found in download mode. 3.2. Flash ---------- ./sercomm eth1 firmware_file This probes for devices in download mode. If more than one found, it prompts for the one to flash. Afterwards the firmware file is checked (matching hardware id etc.) and flashed. A reboot is executed afterwards. 4. Troubleshooting ================== If anything goes wrong with probing or flashing, please execute the command again with "-v", e.g. ./sercomm -v eth1 firmware_file This adds a lot of debug output to stdout. 5. Status ========= Currently tested with one WAG160Nv2 (annex B) only, I don't own more. I've successfully flashed the vendor firmware 2.00.20 (see link below). OpenWRT firmware binaries still miss some fields (work in progress, please wait). 6. Contact ========== You may contact me via email: <jal2 at gmx.de> Please don't ask for ports to other OS or to other devices. 7. Links ======== vendor firmware: http://downloads.linksysbycisco.com/downloads/firmware/1224645224484/WAG160Nv2-EU-ANNEXA-ETSI-2.00.20-code.zip http://downloads.linksysbycisco.com/downloads/firmware/WAG160Nv2-EU-ANNEXB-ETSI-2.00.20-code.zip
About
A tool to upload a firmware into a Sercomm router which entered download mode.
Resources
License
Stars
Watchers
Forks
Releases
No releases published
Packages 0
No packages published
Languages
- C 98.0%
- Makefile 2.0%