OAuth 2.0 Authorization Server as a Rack module. Because you don’t allow strangers into your app, and OAuth 2.0 is the new awesome.
tools.ietf.org/html/draft-ietf-oauth-v2-10
The authorization server needs to keep track of clients, authorization requests, access grants and access tokens. That could only mean one thing: a database.
The current release uses MongoDB. You’re going to need a running server and open connection in the form of a Mongo::DB object. Because MongoDB is schema-less, there’s no need to run migrations.
If MongoDB is not your flavor, you can easily change the models to support a different database engine. All the persistence logic is located in lib/rack/oauth2/models and kept simple by design. And if you did the work to support a different database engine, send us a pull request.
For Rails 2.3/3.0, Rack::OAuth2::Server automatically adds itself as middleware when required, but you do need to configure it from within config/environment.rb (or one of the specific environment files). For example:
Rails::Initializer.run do |config|
. . .
config.after_initialize do
config.oauth.database = Mongo::Connection.new["my_db"]
config.oauth.authenticator = lambda do |username, password|
user = User.find(username)
user if user && user.authenticated?(password)
end
end
end
For Sinatra and Padrino, first require rack/oauth2/sinatra and register Rack::OAuth2::Sinatra into your application. For example:
require "rack/oauth2/sinatra"
class MyApp < Sinatra::Base
register Rack::OAuth2::Sinatra
oauth.database = Mongo::Connection.new["my_db"]
oauth.scope = %w{read write}
oauth.authenticator = lambda do |username, password|
user = User.find(username)
user if user && user.authenticated?(password)
end
. . .
end
With any other Rack server, you can +use Rack::OAuth2::Server+ and pass your own {Rack::OAuth2::Server::Options} object.
The configuration options are:
-
:access_token_path– Path for requesting access token. By convention defaults to/oauth/access_token. -
:authenticator– For username/password authorization. A block that receives the credentials and returns identity string (e.g. user ID) or nil. -
:authorization_types– Array of supported authorization types. Defaults to [“code”, “token”], and you can change it to just one of these names. -
:authorize_path– Path for requesting end-user authorization. By convention defaults to/oauth/authorize. -
:database–Mongo::DBinstance (this is a global setting). -
:expires_in– Number of seconds an auth token will live. If nil or zero, access token never expires. -
:host– Only check requests sent to this host. -
:path– Only check requests for resources under this path. -
:param_authentication– If true, supports authentication using query/form parameters. -
:realm– Authorization realm that will show up in 401 responses. Defaults to use the request host name. -
:logger– The logger to use. Under Rails, defaults to use the Rails logger. Will useRack::Loggerif available.
If you only intend to use the UI authorization flow, you don’t need to worry about the authenticator. If you want to allow client applications to create access tokens by passing the end-user’s username/password, then you need an authenticator. This feature is necessary for some client applications, and quite handy during development/testing.
The authenticator is a block that receives either two or four parameters. The first two are username and password. The other two are the client identifier and scope. It authenticated, it returns an identity, otherwise it can return nil or false. For example:
oauth.authenticator = lambda do |username, password| user = User.find_by_username(username) user if user && user.authenticated?(password) end
Authorization requests go to /oauth/authorize. Rack::OAuth2::Server intercepts these requests and validates the client ID, redirect URI, authorization type and scope. If the request fails validation, the user is redirected back to the client application with a suitable error code.
If the request passes validation, Rack::OAuth2::Server sets the request header oauth.authorization to the authorization handle, and passes control to your application. Your application will ask the user to grant or deny the authorization request.
Once granted, your application signals the grant by setting the response header oauth.authorization to the authorization handle it got before, and setting the response header oauth.identity to the authorized identity. This is typicaly the user ID or account ID, but can be anything you want, as long as it’s a string. Rack::OAuth2::Server intercepts this response and redirects the user back to the client application with an authorization code or access token.
To signal that the user denied the authorization requests your application sets the response header oauth.authorization as before, and returns the status code 403 (Forbidden). Rack::OAuth2::Server will then redirect the user back to the client application with a suitable error code.
In Rails, the entire flow would look something like this:
class OauthController < ApplicationController def authorize if current_user render :action=>"authorize" else redirect_to :action=>"login", :authorization=>oauth.authorization end end def grant head oauth.grant!(current_user.id) end def deny head oauth.deny! end end
Rails actions must render something. The oauth method returns a helper object ({Rack::OAuth2::Server::Helper}) that cannot render anything, but can set the right response headers and return a status code, which we then pass on to the head method.
In Sinatra/Padrino, it would look something like this:
get "/oauth/authorize" do if current_user render "oauth/authorize" else redirect "/oauth/login?authorization=#{oauth.authorization}" end end post "/oauth/grant" do oauth.grant! "Superman" end post "/oauth/deny" do oauth.deny! end
The view would look something like this:
<h2>The application <% link_to h(oauth.client.display_name), oauth.client.link %> is requesting to <%= oauth.scope.to_sentence %> your account.</h2> <form action="/oauth/grant"> <button>Grant</button> <input type="hidden" name="authorization" value="<%= oauth.authorization %>"> </form> <form action="/oauth/deny"> <button>Deny</button> <input type="hidden" name="authorization" value="<%= oauth.authorization %>"> </form>
Rack::OAuth2::Server intercepts all incoming requests and looks for an Authorization header that uses OAuth authentication scheme, like so:
Authorization: OAuth e57807eb99f8c29f60a27a75a80fec6e
It can also support the oauth_token query parameter or form field, if you set param_authentication to true. This option is off by default to prevent conflict with OAuth 1.0 callback.
If Rack::OAuth2::Server finds a valid access token in the request, it sets the request header oauth.identity to the value you supplied during authorization (step 3). You can use oauth.identity to resolve the access token back to user, account or whatever you put there.
If the access token is invalid or revoked, it returns 401 (Unauthorized) to the client. However, if there’s no access token, the request goes through. You might want to protect some URLs but not others, or allow authenticated and unauthenticated access, the former returning more data or having higher rate limit, etc.
It is up to you to reject requests that must be authenticated but are not. You can always just return status code 401, but it’s better to include a proper WWW-Authenticate header, which you can do by setting the response header oauth.no_access to true, or using oauth_required to setup a filter.
You may also want to reject requests that don’t have the proper scope. You can return status code 403, but again it’s better to include a proper WWW-Authenticate header with the required scope. You can do that by setting the response header oauth.no_scope to the scope name, or using oauth_required with the scope option.
In Rails, it would look something like this:
class MyController < ApplicationController before_filter :set_current_user oauth_required :only=>:private oauth_required :only=>:calc, :scope=>"math" # Authenticated/un-authenticated get different responses. def public if oauth.authenticated? render :action=>"more-details" else render :action=>"less-details" end end # Must authenticate to retrieve this. def private render end # Must authenticate with scope math to do this. def calc render :text=>"2+2=4" end protected def set_current_user @current_user = User.find(oauth.identity) if oauth.authenticated? end end
In Sinatra/Padrino, it would look something like this:
before do @current_user = User.find(oauth.identity) if oauth.authenticated? end oauth_required "/private" oauth_required "/calc", :scope=>"math" # Authenticated/un-authenticated get different responses. get "/public" do if oauth.authenticated? render "more-details" else render "less-details" end end # Must authenticate to retrieve this. get "/private" do render "secrets" end # Must authenticate with scope math to do this. get "/calc" do render "2 + 2 = 4" end
Before a client application can request access, there must be a client record in the database. Registration provides the client application with a client ID and secret. The client uses these to authenticate itself.
The client provides its display name, site URL and image URL. These should be shown to the end-user to let them know which client application they’re granting access to.
Clients can also register a redirect URL. This is optional but highly recommended for better security, preventing other applications from hijacking the client’s ID/secret.
You can register clients using the command line tool oauth2-server:
$ oauth2-server register --db my_db
Or you can register clients using the Web-based OAuth console, see below.
Programatically, registering a new client is as simple as:
$ ./script/console
Loading development environment (Rails 2.3.8)
> Rack::OAuth2::Server.register(:display_name=>"UberClient",
:link=>"http://example.com/",
:image_url=>"http://farm5.static.flickr.com/4122/4890273282_58f7c345f4.jpg",
:scope=>%{read write},
:redirect_uri=>"http://example.com/oauth/callback")
> puts "Your client identifier: #{client.id}"
> puts "Your client secret: #{client.secret}"
You may want your application to register its own client application, always with the same client ID and secret, which are also stored in a configuration file. For example, your db/seed.rb may contain:
oauth2 = YAML.load_file(Rails.root + "config/oauth2.yml") Rack::OAuth2::Server.register(id: oauth2["client_id"], secret: oauth2["client_secret"], display_name: "UberClient", link: "http://example.com", redirect_uri: "http://example.com/oauth/callback", scope: oauth2["scope"].split)
When you call register with id and secret parameters it either registers a new client with these specific ID and sceret, or if a client already exists, updates its other properties.
I’ll let you figure that one for yourself.
Rack::OAuth2::Server also supports the so-called “two-legged” OAuth flow, which does not require the end user authorization process. This is typically used in server to server scenarios where no user is involved. To utilize the two-legged flow, send the grant_type of “none” along with the client_id and client_secret to the access token path, and a new access token will be generated (assuming the client_id and client_secret check out).
We haz it, and it’s pretty rad:
To get the Web admin running, you’ll need to do the following. First, you’ll need to register a new client application that can access the OAuth Web admin, with the scope oauth-scope and redirect_uri that points to where you plan the Web admin to live. This URL must end with “/admin”, for example, “example.com/oauth/admin”.
The easiest way to do this is to run the oauth2-sever command line tool:
$ oauth2-server setup --db my_db
Next, in your application, make sure to ONLY AUTHORIZE ADMINISTRATORS to access the Web admin, by granting them access to the oauth-admin scope. For example:
def grant # Only admins allowed to authorize the scope oauth-admin if oauth.scope.include?("oauth-admin") && !current_user.admin? head oauth.deny! else head oauth.grant!(current_user.id) end end
Make sure you do that, or you’ll allow anyone access to the OAuth Web admin.
Next, mount the OAuth Web admin as part of your application, and feed it the client ID/secret. For example, for Rails 2.3.x add this to config/environment.rb:
Rails::Initializer.run do |config|
. . .
config.after_initialize do
config.middleware.use Rack::OAuth2::Server::Admin.mount
Rack::OAuth2::Server::Admin.set :client_id, "4dca20453e4859cb000007"
Rack::OAuth2::Server::Admin.set :client_secret, "981fa734e110496fcf667cbf52fbaf03"
Rack::OAuth2::Server::Admin.set :scope, %w{read write}
end
end
For Rails 3.0.x, add this to you config/application.rb:
module MyApp class Application < Rails::Application config.after_initialize do Rack::OAuth2::Server::Admin.set :client_id, "4dca20453e4859cb000007" Rack::OAuth2::Server::Admin.set :client_secret, "981fa734e110496fcf667cbf52fbaf03" Rack::OAuth2::Server::Admin.set :scope, %w{read write} end end end
And add the follownig to config/routes.rb:
mount Rack::OAuth2::Server::Admin=>"/oauth/admin"
For Sinatra, Padrino and other Rack-based applications, you’ll want to mount like so (e.g. in config.ru):
Rack::Builder.new do map("/oauth/admin") { run Rack::OAuth2::Server::Admin } map("/") { run MyApp } end Rack::OAuth2::Server::Admin.set :client_id, "4dca20453e4859cb000007" Rack::OAuth2::Server::Admin.set :client_secret, "981fa734e110496fcf667cbf52fbaf03" Rack::OAuth2::Server::Admin.set :scope, %w{read write}
Next, open your browser to example.com/oauth/admin, or wherever you mounted the Web admin.
You can set the following options:
-
client_id– Client application identified, require to authenticate. -
client_secret– Client application secret, required to authenticate. -
authorize– Endpoint for requesing authorization, defaults to /oauth/admin. -
template_url– Will map an access token identity into a URL in your application, using the substitution value “{id}”, e.g. “example.com/users/#{id}”) -
force_ssl– Forces all requests to use HTTPS (true by default except in development mode). -
scope– Common scope shown and added by default to new clients (array of names, e.g. [“read”, “write”]).
The OAuth Web admin is a single-page client application that operates by accessing the OAuth API. The API is mounted at /oauth/admin/api (basically /api relative to the UI), you can access it yourself if you have an access token with the scope oauth-admin.
The API is undocumented, but between the very simple Sinatra code that provides he API, and just as simple Sammy.js code that consumes it, it should be easy to piece together.
The premise of OAuth 2.0 is that you can use it straight from the command line. Let’s start by creating an access token. Aside from the UI authorization flow, OAuth 2.0 allows you to authenticate with username/password. You’ll need to register an authenticator, see step 2 above for details.
Now make a request using the client credentials and your account username/password, e.g.:
$ curl -i http://localhost:3000/oauth/access_token \ -F grant_type=password \ -F client_id=4dca20453e4859cb000007 \ -F client_secret=981fa734e110496fcf667cbf52fbaf03 \ -F "scope=read write" \ -F [email protected] \ -F password=not.telling
This will spit out a JSON document, something like this:
{ "scope":"import discover contacts lists",
"access_token":"e57807eb99f8c29f60a27a75a80fec6e" }
Grab the access_token value and use it. The access token is good until you delete it from the database. Making a request using the access token:
$ curl -i http://localhost:3000/api/read -H "Authorization: OAuth e57807eb99f8c29f60a27a75a80fec6e"
Although not recommended, you can also pass the token as a query parameter, or when making POST request, as a form field:
$ curl -i http://localhost:3000/api/read?oauth_token=e57807eb99f8c29f60a27a75a80fec6e $ curl -i http://localhost:3000/api/update -F name=Superman -F oauth_token=e57807eb99f8c29f60a27a75a80fec6e
You’ll need to set the option param_authentication to true. Watch out, since this query parameter could conflict with OAuth 1.0 authorization responses that also use oauth_token for a different purpose.
Here’s a neat trick. You can create a .curlrc file and load it using the -K option:
$ cat .curlrc header = "Authorization: OAuth e57807eb99f8c29f60a27a75a80fec6e" $ curl -i http://localhost:3000/api/read -K .curlrc
If you create .curlrc in your home directory, curl will automatically load it. Convenient, but dangerous, you might end up sending the access token to any server you curl. Useful for development, testing, just don’t use it with any production access tokens.
You can use the Server module to create, fetch and otherwise work with access tokens and grants. Available methods include:
-
access_grant – Creates and returns a new access grant. You can use that for one-time token, e.g. users who forgot their password and need to login using an email message.
-
token_for – Returns access token for particular identity. You can use that to give access tokens to clients other than through the OAuth 2.0 protocol, e.g. if you let users authenticate using Facebook Connect or Twitter OAuth.
-
get_access_token – Resolves access token (string) into access token (AccessToken object).
-
list_access_tokens – Returns all access tokens for a given identity, which you’ll need if you offer a UI for uses to review and revoke access tokens they previously granted.
-
get_client – Resolves client identifier into a Client object.
-
register – Registers a new client application. Can also be used to change existing registration (if you know the client’s ID and secret). Idempotent, so perfect for running during setup and migration.
-
get_auth_request – Resolves authorization request handle into an AuthRequest object. Could be useful during the authorization flow.
This is briefly what the authorization flow looks like, how the workload is split between Rack::OAuth2::Server and your application, and the protocol the two use to control the authorization flow:
Rack::OAuth2::Server
----------------------- -----------------------
Client app | /oauth/authorize | | Set request.env |
redirect -> | | -> | | ->
| authenticate client | | oauth.authorization |
----------------------- -----------------------
Your code
-------------------- ---------------------- -----------------------
| Authenticate user | | Ask user to grant/ | | Set response |
-> | | -> | deny client access | -> | | ->
| | | to their account | | oauth.authorization |
| | | | | oauth.identity |
-------------------- ---------------------- -----------------------
Rack::OAuth2::Server
-----------------------
| Create access grant |
-> | or access token for | -> Redirect back
| oauth.identity | to client app
-----------------------
The {Rack::OAuth2::Server::Client} model represents the credentials of a client application. There are two pairs: the client identifier and secret, which the client uses to identify itself to the authorization server, and the display name and URL, which the client uses to identify itself to the end user.
The client application is not tied to a single Client record. Specifically, if the client credentials are compromised, you’ll want to revoke it and create a new Client with new pair of identifier/secret. You can leave the revoked instance around.
Calling revoke! on the client revokes access using these credential pair, and also revokes any outstanding authorization requests, access grants and access tokens created using these credentials.
You may also want to register a redirect URI. If registered, the client is only able to request authorization that redirect back to that redirect URI.
The authorization process may involve multiple requests, and the application must maintain the authorization request details from beginning to end.
To keep the application simple, all the necessary information for a single authorization request is stored in the {Rack::OAuth2::Server::AuthRequest} model. The application only needs to keep track of the authorization request identifier.
Granting an authorization request (by calling grant!) creates an access grant or access token, depending on the requested response type, and associates it with the identity.
An access grant ({Rack::OAuth2::Server::AccessGrant}) is a nonce use to generate access token. This model keeps track of the nonce (the “authorization code”) and all the data it needs to create an access token.
An access token allows the client to access the resource with the given scope on behalf of a given identity. It keeps track of the account identifier (supplied by the application), client identifier and scope (both supplied by the client).
An {Rack::OAuth2::Server::AccessToken} is created by copying values from an AuthRequest or AccessGrant, and remains in effect until revoked. (OAuth 2.0 access tokens can also expire, but we don’t support expiration at the moment)
Rack::OAuth2::Server was written to provide authorization/authentication for the new Flowtown API. Thanks to Flowtown for making it happen and allowing it to be open sourced.
Rack::OAuth2::Server is available under the MIT license.