ofproto.at

AT_BANNER([ofproto])

AT_SETUP([ofproto - echo request])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -vwarn probe br0])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - handling messages with bad version])
OVS_VSWITCHD_START

# Start a monitor running OpenFlow 1.0, then send the switch an OF1.1 features
# request
AT_CHECK([ovs-ofctl -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CAPTURE_FILE([monitor.log])
ovs-appctl -t ovs-ofctl ofctl/send 0205000801234567
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//
/ECHO/d' monitor.log], [0], [dnl
send: OFPT_FEATURES_REQUEST (OF1.1):
OFPT_ERROR (OF1.1): OFPBRC_BAD_VERSION
OFPT_FEATURES_REQUEST (OF1.1):
OFPT_BARRIER_REPLY:
])

OVS_VSWITCHD_STOP(["/received OpenFlow version 0x02 != expected 01/d"])
AT_CLEANUP

AT_SETUP([ofproto - feature request, config request])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPT_FEATURES_REPLY: dpid:fedcba9876543210
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: output enqueue set_vlan_vid set_vlan_pcp strip_vlan mod_dl_src mod_dl_dst mod_nw_src mod_nw_dst mod_nw_tos mod_tp_src mod_tp_dst
 LOCAL(br0): addr:aa:55:aa:55:00:00
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - set OpenFlow port number])
OVS_VSWITCHD_START(
       [add-port br0 p1 -- set Interface p1 type=dummy --\
        add-port br0 p2 -- set Interface p2 type=dummy ofport_request=99])
AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
AT_CHECK([[sed '
s/ (xid=0x[0-9a-fA-F]*)//
s/00:0.$/00:0x/' < stdout]],
      [0], [dnl
OFPT_FEATURES_REPLY: dpid:fedcba9876543210
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: output enqueue set_vlan_vid set_vlan_pcp strip_vlan mod_dl_src mod_dl_dst mod_nw_src mod_nw_dst mod_nw_tos mod_tp_src mod_tp_dst
 1(p1): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
 99(p2): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
 LOCAL(br0): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])

OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - port stats - (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -vwarn dump-ports br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_PORT reply: 1 ports
  port LOCAL: rx pkts=0, bytes=0, drop=?, errs=?, frame=?, over=?, crc=?
           tx pkts=0, bytes=0, drop=?, errs=?, coll=?
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - port stats - (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn dump-ports br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_PORT reply (OF1.2): 1 ports
  port LOCAL: rx pkts=0, bytes=0, drop=?, errs=?, frame=?, over=?, crc=?
           tx pkts=0, bytes=0, drop=?, errs=?, coll=?
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - port stats - (OpenFlow 1.4)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow14 -vwarn dump-ports br0], [0], [stdout])
AT_CHECK([strip_xids < stdout | sed 's/duration=[[0-9.]]*s/duration=?s/'],
  [0], [dnl
OFPST_PORT reply (OF1.4): 1 ports
  port LOCAL: rx pkts=0, bytes=0, drop=?, errs=?, frame=?, over=?, crc=?
           tx pkts=0, bytes=0, drop=?, errs=?, coll=?
           duration=?s
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - port-desc stats (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -vwarn dump-ports-desc br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_PORT_DESC reply:
 LOCAL(br0): addr:aa:55:aa:55:00:00
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - port-desc stats (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn dump-ports-desc br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_PORT_DESC reply (OF1.2):
 LOCAL(br0): addr:aa:55:aa:55:00:00
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - port-desc stats (OpenFlow 1.5)])
OVS_VSWITCHD_START
add_of_ports br0 1 2 3
AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-ports-desc br0], [0], [stdout])
AT_CHECK([strip_xids < stdout | sed 's/00:0./00:0x/'], [0], [dnl
OFPST_PORT_DESC reply (OF1.5):
 1(p1): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
 2(p2): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
 3(p3): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
 LOCAL(br0): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
])
AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-ports-desc br0 2], [0], [stdout])
AT_CHECK([strip_xids < stdout | sed 's/00:0./00:0x/'], [0], [dnl
OFPST_PORT_DESC reply (OF1.5):
 2(p2): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl CHECK_QUEUE_STATS(label, option, format)
m4_define([CHECK_QUEUE_STATS], [
AT_SETUP([ofproto - queue stats - (OpenFlow $1)])
OVS_VSWITCHD_START

AT_CHECK([ovs-ofctl -O $2 queue-stats br0 | strip_xids], [0],
  [OFPST_QUEUE reply$3: 1 queues
  port LOCAL queue 0: bytes=?, pkts=?, errors=?, duration=?
])

AT_CHECK([ovs-ofctl -O $2 queue-stats br0 LOCAL | strip_xids], [0],
  [OFPST_QUEUE reply$3: 1 queues
  port LOCAL queue 0: bytes=?, pkts=?, errors=?, duration=?
])

AT_CHECK([ovs-ofctl -O $2 queue-stats br0 LOCAL 0 | strip_xids], [0],
  [OFPST_QUEUE reply$3: 1 queues
  port LOCAL queue 0: bytes=?, pkts=?, errors=?, duration=?
])

AT_CHECK([ovs-ofctl -O $2 queue-stats br0 ANY 0 | strip_xids], [0],
  [OFPST_QUEUE reply$3: 1 queues
  port LOCAL queue 0: bytes=?, pkts=?, errors=?, duration=?
])

AT_CHECK([ovs-ofctl -O $2 queue-stats br0 LOCAL 5 | strip_xids], [0],
  [OFPT_ERROR$3: OFPQOFC_BAD_QUEUE
OFPST_QUEUE request$3: port=LOCAL queue=5
])

AT_CHECK([ovs-ofctl -O $2 queue-stats br0 ANY 5 | strip_xids], [0],
  [OFPT_ERROR$3: OFPQOFC_BAD_QUEUE
OFPST_QUEUE request$3: port=ANY queue=5
])

AT_CHECK([ovs-ofctl -O $2 queue-stats br0 10 | strip_xids], [0],
  [OFPT_ERROR$3: OFPQOFC_BAD_PORT
OFPST_QUEUE request$3: port=10 queue=ALL
])
OVS_VSWITCHD_STOP
AT_CLEANUP
])
CHECK_QUEUE_STATS([1.0], [OpenFlow10], [])
CHECK_QUEUE_STATS([1.1], [OpenFlow11], [ (OF1.1)])
CHECK_QUEUE_STATS([1.2], [OpenFlow12], [ (OF1.2)])
CHECK_QUEUE_STATS([1.3], [OpenFlow13], [ (OF1.3)])
CHECK_QUEUE_STATS([1.4], [OpenFlow14], [ (OF1.4)])

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - queue configuration - (OpenFlow 1.0)])
OVS_VSWITCHD_START
add_of_ports br0 1 2
AT_CHECK([ovs-ofctl queue-get-config br0 1], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPT_QUEUE_GET_CONFIG_REPLY: port=1
queue 0:
])
AT_CHECK([ovs-ofctl queue-get-config br0], [0], [stdout])
AT_CHECK([strip_xids < stdout | sort], [0], [dnl
OFPT_QUEUE_GET_CONFIG_REPLY: port=1
OFPT_QUEUE_GET_CONFIG_REPLY: port=2
queue 0:
queue 0:
])
AT_CHECK([ovs-ofctl queue-get-config br0 10], [0],
  [OFPT_ERROR (xid=0x2): OFPQOFC_BAD_PORT
OFPT_QUEUE_GET_CONFIG_REQUEST (xid=0x2): port=10
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - queue configuration - (OpenFlow 1.1)])
OVS_VSWITCHD_START
add_of_ports br0 1 2
AT_CHECK([ovs-ofctl -O OpenFlow11 queue-get-config br0 1], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPT_QUEUE_GET_CONFIG_REPLY (OF1.1): port=1
queue 0:
])
AT_CHECK([ovs-ofctl -O OpenFlow11 queue-get-config br0 10 | strip_xids], [0],
  [OFPT_ERROR (OF1.1): OFPQOFC_BAD_PORT
OFPT_QUEUE_GET_CONFIG_REQUEST (OF1.1): port=10
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - queue configuration - (OpenFlow 1.2)])
OVS_VSWITCHD_START
add_of_ports br0 1 2
AT_CHECK([ovs-ofctl -O OpenFlow12 queue-get-config br0 1], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPT_QUEUE_GET_CONFIG_REPLY (OF1.2): port=1
queue 0:
])
AT_CHECK([ovs-ofctl -O OpenFlow12 queue-get-config br0 ANY], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPT_QUEUE_GET_CONFIG_REPLY (OF1.2): port=ANY
queue 0:
queue 0:
queue 0:
])
AT_CHECK([ovs-ofctl -O OpenFlow12 queue-get-config br0 10 | strip_xids], [0],
  [OFPT_ERROR (OF1.2): OFPQOFC_BAD_PORT
OFPT_QUEUE_GET_CONFIG_REQUEST (OF1.2): port=10
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - queue configuration - (OpenFlow 1.4)])
OVS_VSWITCHD_START
add_of_ports br0 1 2

AT_CHECK([ovs-ofctl -O OpenFlow14 queue-get-config br0 any | strip_xids], [0],
  [OFPST_QUEUE_DESC reply (OF1.4): port=1
queue 0:
port=2
queue 0:
port=LOCAL
queue 0:
])

AT_CHECK([ovs-ofctl -O OpenFlow14 queue-get-config br0 1 | strip_xids], [0],
  [OFPST_QUEUE_DESC reply (OF1.4): port=1
queue 0:
])

AT_CHECK([ovs-ofctl -O OpenFlow14 queue-get-config br0 10 | strip_xids], [0],
  [OFPT_ERROR (OF1.4): OFPQOFC_BAD_PORT
OFPST_QUEUE_DESC request (OF1.4): port=10
])

AT_CHECK([ovs-ofctl -O OpenFlow14 queue-get-config br0 1 2 | strip_xids], [0],
  [OFPT_ERROR (OF1.4): OFPQOFC_BAD_QUEUE
OFPST_QUEUE_DESC request (OF1.4): port=1 queue=2
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
dnl Actions definition listed in both supported formats (w/ actions=)
AT_SETUP([ofproto - no group support (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1234,type=all,bucket=output:10
group_id=1235,type=all,bucket=actions=output:10
])
AT_DATA([stderr], [dnl
ovs-ofctl: none of the usable flow formats (OXM,OpenFlow11) is among the allowed flow formats (OpenFlow10,NXM)
])
AT_CHECK([ovs-ofctl -O OpenFlow10 -vwarn add-groups br0 groups.txt], [1], ,[stderr])
AT_CHECK([ovs-ofctl -O OpenFlow10 -vwarn mod-group br0 'group_id=1234,type=all,bucket=output:10'], [1], ,[stderr])
AT_CHECK([ovs-ofctl -O OpenFlow10 -vwarn del-groups br0], [1], ,[stderr])
AT_CHECK([ovs-ofctl -O OpenFlow10 -vwarn dump-groups br0 ], [1], ,[stderr])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
dnl Actions definition listed in both supported formats (w/ actions=)
AT_SETUP([ofproto - del group (OpenFlow 1.1)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1234,type=all,bucket=output:10
group_id=1235,type=all,bucket=actions=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0 ], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.1):
 group_id=1234,type=all,bucket=actions=output:10
 group_id=1235,type=all,bucket=actions=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.1):
 group_id=1235,type=all,bucket=actions=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.1):
 group_id=1235,type=all,bucket=actions=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0], [0])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.1):
])

# Negative test.
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=0xfffffff0],
  [1], [], [ovs-ofctl: invalid group id 4294967280
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
dnl Actions definition listed in both supported formats (w/ actions=)
AT_SETUP([ofproto - add indirect group])
OVS_VSWITCHD_START
dnl indirect group must have exactly one bucket
AT_DATA([stderr], [dnl
OFPT_ERROR (OF1.1) (xid=0x2): OFPGMFC_INVALID_GROUP
OFPT_GROUP_MOD (OF1.1) (xid=0x2): ***decode error: OFPGMFC_INVALID_GROUP***
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 'group_id=1234,type=indirect'], [1], , [stderr])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 'group_id=1235,type=indirect,bucket=output:10'])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 'group_id=1236,type=indirect,bucket=output:10,bucket=output:11'], [1], , [stderr])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
dnl Actions definition listed in both supported formats (w/ actions=)
AT_SETUP([ofproto - del group (OpenFlow 1.5)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1233,type=select,selection_method=hash,bucket=output:10,bucket=output:11
group_id=1234,type=select,selection_method=hash,fields(eth_dst,ip_dst,tcp_dst),bucket=output:10,bucket=output:11
group_id=1235,type=all,bucket=actions=output:12,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=select,selection_method=hash,fields(eth_dst,ip_dst,tcp_dst),bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1235,type=all,bucket=bucket_id:2,actions=output:12,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
 group_id=1233,type=select,selection_method=hash,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1235,type=all,bucket=bucket_id:2,actions=output:12,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
 group_id=1233,type=select,selection_method=hash,bucket=bucket_id:0,actions=output:10,bucket=bucket_id:1,actions=output:11
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn del-groups br0], [0])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - del group deletes flows])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1234,type=all,bucket=output:10
group_id=1235,type=all,bucket=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
AT_DATA([flows.txt], [dnl
tcp actions=group:1234
table=2 udp actions=group:1235
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flows br0 flows.txt])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
[0], [dnl
 table=2, udp actions=group:1235
 tcp actions=group:1234
OFPST_FLOW reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
[0], [dnl
 table=2, udp actions=group:1235
OFPST_FLOW reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
[0], [dnl
 table=2, udp actions=group:1235
OFPST_FLOW reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn del-groups br0])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-flows br0 | ofctl_strip | sort],
[0], [dnl
OFPST_FLOW reply (OF1.1):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
dnl Actions definition listed in both supported formats (w/ actions=)
AT_SETUP([ofproto - insert buckets])
OVS_VSWITCHD_START
# Add group with no buckets.
AT_DATA([groups.txt], [dnl
group_id=1234,type=all
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all
])

# Add two buckets, using "last".
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=last,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11])
AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11
])

# Start over again, then add two buckets using "first".
AT_CHECK([ovs-ofctl -O OpenFlow15 --strict del-groups br0 group_id=1234])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-group br0 group_id=1234,type=all])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=first,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11])
AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11
])

# Add two more buckets before the existing ones.
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=first,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11
])

# Add another bucket at the end.
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=last,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
])

# Verify that duplicate bucket IDs are rejected.
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=last,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15], [1], [], [stderr])
AT_CHECK([strip_xids < stderr | sed '/truncated/,$d'], [0], [dnl
OFPT_ERROR (OF1.5): OFPGMFC_BUCKET_EXISTS
OFPT_GROUP_MOD (OF1.5):
])


# Add another bucket just before bucket 15.
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=15])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
])

# Add two more buckets just before bucket 11,
# getting the command from a file.
AT_DATA([buckets.txt], [dnl
group_id=1234,command_bucket_id=11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 - < buckets.txt])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
])

# Add yet two more buckets.
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=15,bucket=bucket_id:20,actions=output:20,bucket=bucket_id:21,actions=output:21])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:20,actions=output:20,bucket=bucket_id:21,actions=output:21
])

# Negative tests.
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=0xffffff01,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1], [1], [],
  [ovs-ofctl: invalid command bucket id 4294967041
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn insert-buckets br0 group_id=1234,command_bucket_id=first,bucket=bucket_id:0,actions=output:0,bucket=bucket_id:1,actions=output:1], [1], [],
  [ovs-ofctl: insert-bucket needs OpenFlow 1.5 or later ('-O OpenFlow15')
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
dnl Actions definition listed in both supported formats (w/ actions=)
AT_SETUP([ofproto - remove buckets])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:16,actions=output:16
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
AT_CHECK([ovs-ofctl -F OXM-OpenFlow15 -O OpenFlow15 -vwarn dump-groups br0 1234], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all,bucket=bucket_id:10,actions=output:10,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:16,actions=output:16
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=first])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15,bucket=bucket_id:16,actions=output:16
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=last])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:13,actions=output:13,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=13])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all,bucket=bucket_id:11,actions=output:11,bucket=bucket_id:12,actions=output:12,bucket=bucket_id:14,actions=output:14,bucket=bucket_id:15,actions=output:15
])
AT_DATA([buckets.txt], [dnl
group_id=1234
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 - < buckets.txt])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.5):
 group_id=1234,type=all
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=first])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=last])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=all])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=1], [1], [], [stderr])
AT_CHECK([ofctl_strip < stderr], [0], [dnl
OFPT_ERROR (OF1.5): OFPGMFC_UNKNOWN_BUCKET
OFPT_GROUP_MOD (OF1.5):
 REMOVE_BUCKET command_bucket_id:1,group_id=1234
])
# Negative test.
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn remove-buckets br0 group_id=1234,command_bucket_id=last], [1], [],
  [ovs-ofctl: remove-bucket needs OpenFlow 1.5 or later ('-O OpenFlow15')
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - flow mod checks group availability])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 group_id=1234,type=all,bucket=output:10])
AT_DATA([flows.txt], [dnl
tcp actions=group:1234
udp actions=group:1235
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=group:1234'])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=group:1235'], [1], [], [stderr])

# The output should look like this:
#
# 00000000  02 0e 00 98 00 00 00 02-00 00 00 00 00 00 00 00 |................|
# 00000010  00 00 00 00 00 00 00 00-ff 00 00 00 00 00 80 00 |................|
# 00000020  ff ff ff ff ff ff ff ff-ff ff ff ff 00 00 00 00 |................|
# 00000030  00 00 00 58 00 00 00 00-00 00 03 d7 00 00 00 00 |...X............|
#
# This 'sed' command captures the error message but drops details.
AT_CHECK([sed '/truncated/d
/^000000.0/d' stderr | strip_xids], [0],
  [OFPT_ERROR (OF1.1): OFPBAC_BAD_OUT_GROUP
OFPT_FLOW_MOD (OF1.1):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - group description])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 group_id=1234,type=all,bucket=output:10], [0], [stdout])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.1):
 group_id=1234,type=all,bucket=actions=output:10
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - group description])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-group br0 group_id=1234,type=all,bucket=output:10])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-groups br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_DESC reply (OF1.1):
 group_id=1234,type=all,bucket=actions=output:10
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - group features])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn dump-group-features br0], [0], [stdout])
AT_CHECK([strip_xids < stdout], [0], [dnl
OFPST_GROUP_FEATURES reply (OF1.2):
 Group table:
    Types:  0xf
    Capabilities:  0x7
    all group:
       max_groups=0xffffff00
       actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
    select group:
       max_groups=0xffffff00
       actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
    indirect group:
       max_groups=0xffffff00
       actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
    fast failover group:
       max_groups=0xffffff00
       actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - group stats (OpenFlow 1.1)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1234,type=all,bucket=output:10
group_id=1235,type=all,bucket=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-groups br0 groups.txt])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn add-flow br0 'tcp actions=group:1234'])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-group-stats br0 group_id=1234], [0], [stdout])
AT_CHECK([strip_xids < stdout | sort], [0], [dnl
 group_id=1234,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
OFPST_GROUP reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 -vwarn dump-group-stats br0], [0], [stdout])
AT_CHECK([strip_xids < stdout | sort], [0], [dnl
 group_id=1234,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
 group_id=1235,ref_count=0,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
OFPST_GROUP reply (OF1.1):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - group stats (OpenFlow 1.3)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1234,type=all,bucket=output:10
group_id=1235,type=all,bucket=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn add-groups br0 groups.txt])
AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn add-flow br0 'tcp actions=group:1234'])
AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn dump-group-stats br0 group_id=1234], [0], [stdout])
AT_CHECK([strip_xids < stdout | sed 's/duration=[[0-9.]]*s/duration=?s/' | sort], [0], [dnl
 group_id=1234,duration=?s,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
OFPST_GROUP reply (OF1.3):
])
AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn dump-group-stats br0], [0], [stdout])
AT_CHECK([strip_xids < stdout | sed 's/duration=[[0-9.]]*s/duration=?s/' | sort], [0], [dnl
 group_id=1234,duration=?s,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
 group_id=1235,duration=?s,ref_count=0,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
OFPST_GROUP reply (OF1.3):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This is really bare-bones.
dnl It at least checks request and reply serialization and deserialization.
AT_SETUP([ofproto - group stats (OpenFlow 1.5)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1234,type=all,bucket=output:10
group_id=1235,type=all,bucket=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-groups br0 groups.txt])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn add-flow br0 'tcp actions=group:1234'])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-group-stats br0 group_id=1234], [0], [stdout])
AT_CHECK([strip_xids < stdout | sed 's/duration=[[0-9.]]*s/duration=?s/' | sort], [0], [dnl
 group_id=1234,duration=?s,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
OFPST_GROUP reply (OF1.5):
])
AT_CHECK([ovs-ofctl -O OpenFlow15 -vwarn dump-group-stats br0], [0], [stdout])
AT_CHECK([strip_xids < stdout | sed 's/duration=[[0-9.]]*s/duration=?s/' | sort], [0], [dnl
 group_id=1234,duration=?s,ref_count=1,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
 group_id=1235,duration=?s,ref_count=0,packet_count=0,byte_count=0,bucket0:packet_count=0,byte_count=0
OFPST_GROUP reply (OF1.5):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This found a use-after-free error in bridge destruction in the
dnl presence of groups.
AT_SETUP([ofproto - group add then bridge delete (OpenFlow 1.3)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1234,type=all,bucket=output:10
group_id=1235,type=all,bucket=output:10

dnl This checks for regression against a parser bug such that
dnl "actions=resbmit(,1)" etc. was rejected as a syntax error.
group_id=2345,type=select,bucket=weight:10,actions=resubmit(,1),bucket=weight:10,actions=resubmit(,2),bucket=weight:1,actions=resubmit(,3)
])
AT_CHECK([ovs-ofctl -O OpenFlow13 -vwarn add-groups br0 groups.txt])
AT_CHECK([ovs-vsctl del-br br0])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod-port (OpenFlow 1.0)])
OVS_VSWITCHD_START
for command_config_state in \
    'up 0 0' \
    'noflood NO_FLOOD 0' \
    'down PORT_DOWN,NO_FLOOD LINK_DOWN' \
    'flood PORT_DOWN LINK_DOWN' \
    'no-receive PORT_DOWN,NO_RECV LINK_DOWN' \
    'no-forward PORT_DOWN,NO_RECV,NO_FWD LINK_DOWN' \
    'no-packet-in PORT_DOWN,NO_RECV,NO_FWD,NO_PACKET_IN LINK_DOWN' \
    'forward PORT_DOWN,NO_RECV,NO_PACKET_IN LINK_DOWN' \
    'packet-in PORT_DOWN,NO_RECV LINK_DOWN' \
    'up NO_RECV 0' \
    'receive 0 0'
do
    set $command_config_state
    command=$[1] config=`echo $[2] | sed 's/,/ /g'` state=$[3]
    AT_CHECK([ovs-ofctl -vwarn mod-port br0 br0 $command])
    AT_CHECK([ovs-ofctl -vwarn show br0], [0], [stdout])
    AT_CHECK_UNQUOTED([strip_xids < stdout], [0], [dnl
OFPT_FEATURES_REPLY: dpid:fedcba9876543210
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS QUEUE_STATS ARP_MATCH_IP
actions: output enqueue set_vlan_vid set_vlan_pcp strip_vlan mod_dl_src mod_dl_dst mod_nw_src mod_nw_dst mod_nw_tos mod_tp_src mod_tp_dst
 LOCAL(br0): addr:aa:55:aa:55:00:00
     config:     $config
     state:      $state
     speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY: frags=normal miss_send_len=0
])
done
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod-port (OpenFlow 1.2)])
OVS_VSWITCHD_START
for command_config_state in \
    'up 0 0' \
    'down PORT_DOWN LINK_DOWN' \
    'no-receive PORT_DOWN,NO_RECV LINK_DOWN' \
    'no-forward PORT_DOWN,NO_RECV,NO_FWD LINK_DOWN' \
    'no-packet-in PORT_DOWN,NO_RECV,NO_FWD,NO_PACKET_IN LINK_DOWN' \
    'forward PORT_DOWN,NO_RECV,NO_PACKET_IN LINK_DOWN' \
    'packet-in PORT_DOWN,NO_RECV LINK_DOWN' \
    'up NO_RECV 0' \
    'receive 0 0'
do
    set $command_config_state
    command=$[1] config=`echo $[2] | sed 's/,/ /g'` state=$[3]
    AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn mod-port br0 br0 $command])
    AT_CHECK([ovs-ofctl -O OpenFlow12 -vwarn show br0], [0], [stdout])
    AT_CHECK_UNQUOTED([strip_xids < stdout], [0], [dnl
OFPT_FEATURES_REPLY (OF1.2): dpid:fedcba9876543210
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS GROUP_STATS QUEUE_STATS
 LOCAL(br0): addr:aa:55:aa:55:00:00
     config:     $config
     state:      $state
     speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY (OF1.2): frags=normal miss_send_len=0
])
done
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod-port (OpenFlow 1.4)])
OVS_VSWITCHD_START
for command_config_state in \
    'up 0 0' \
    'down PORT_DOWN LINK_DOWN' \
    'no-receive PORT_DOWN,NO_RECV LINK_DOWN' \
    'no-forward PORT_DOWN,NO_RECV,NO_FWD LINK_DOWN' \
    'no-packet-in PORT_DOWN,NO_RECV,NO_FWD,NO_PACKET_IN LINK_DOWN' \
    'forward PORT_DOWN,NO_RECV,NO_PACKET_IN LINK_DOWN' \
    'packet-in PORT_DOWN,NO_RECV LINK_DOWN' \
    'up NO_RECV 0' \
    'receive 0 0'
do
    set $command_config_state
    command=$[1] config=`echo $[2] | sed 's/,/ /g'` state=$[3]
    AT_CHECK([ovs-ofctl -O OpenFlow14 -vwarn mod-port br0 br0 $command])
    AT_CHECK([ovs-ofctl -O OpenFlow14 -vwarn show br0], [0], [stdout])
    AT_CHECK_UNQUOTED([strip_xids < stdout], [0], [dnl
OFPT_FEATURES_REPLY (OF1.4): dpid:fedcba9876543210
n_tables:254, n_buffers:256
capabilities: FLOW_STATS TABLE_STATS PORT_STATS GROUP_STATS QUEUE_STATS
OFPST_PORT_DESC reply (OF1.4):
 LOCAL(br0): addr:aa:55:aa:55:00:00
     config:     $config
     state:      $state
     speed: 0 Mbps now, 0 Mbps max
OFPT_GET_CONFIG_REPLY (OF1.4): frags=normal miss_send_len=0
])
done
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - basic flow_mod commands (NXM)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip], [0], [NXST_FLOW reply:
])
AT_CHECK([echo 'in_port=2,actions=1' | ovs-ofctl add-flows br0 -])
AT_CHECK([ovs-ofctl add-flow br0 in_port=1,actions=2])
AT_CHECK([ovs-ofctl -F nxm add-flow br0 table=1,in_port=4,actions=3])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 in_port=1 actions=output:2
 in_port=2 actions=output:1
 table=1, in_port=4 actions=output:3
NXST_FLOW reply:
])
AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | strip_xids], [0], [dnl
NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=2
])
AT_CHECK([ovs-ofctl del-flows br0])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip], [0], [NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - basic flow_mod commands (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply:
])
AT_CHECK([echo 'in_port=2,actions=1' | ovs-ofctl -F openflow10 add-flows br0 -])
AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 in_port=1,actions=2])
AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 table=1,in_port=4,actions=3])
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 in_port=1 actions=output:2
 in_port=2 actions=output:1
 table=1, in_port=4 actions=output:3
OFPST_FLOW reply:
])
AT_CHECK([ovs-ofctl -F openflow10 dump-aggregate br0 table=0 | strip_xids], [0], [dnl
OFPST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=2
])
AT_CHECK([ovs-ofctl -F openflow10 del-flows br0])
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

# It's really dumb that check_overlap and reset_counts are considered
# part of flow state, but OpenFlow implies that it is, and OFTest and
# some users insist on it.
AT_SETUP([ofproto - add-flow and flags])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 check_overlap,in_port=1,actions=drop])
# Prior to OF1.3, flow dumps didn't include a "flags" field.
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip], [0], [dnl
OFPST_FLOW reply:
 in_port=1 actions=drop
])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [dnl
OFPST_FLOW reply (OF1.1):
 in_port=1 actions=drop
])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip], [0], [dnl
OFPST_FLOW reply (OF1.2):
 in_port=1 actions=drop
])
# OF1.3 makes the flags visible.
AT_CHECK([ovs-ofctl -O OpenFlow13 dump-flows br0 | ofctl_strip], [0], [dnl
OFPST_FLOW reply (OF1.3):
 check_overlap reset_counts in_port=1 actions=drop
])
AT_CHECK([ovs-ofctl -O OpenFlow14 dump-flows br0 | ofctl_strip], [0], [dnl
OFPST_FLOW reply (OF1.4):
 check_overlap reset_counts in_port=1 actions=drop
])
AT_CHECK([ovs-ofctl -O OpenFlow15 dump-flows br0 | ofctl_strip], [0], [dnl
OFPST_FLOW reply (OF1.5):
 check_overlap reset_counts in_port=1 actions=drop
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - basic flow_mod commands (OpenFlow 1.1)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply (OF1.1):
])
AT_CHECK([echo 'in_port=2,actions=1' | ovs-ofctl -O OpenFlow11 add-flows br0 -])
AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 in_port=1,actions=2])
AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 table=1,in_port=4,actions=3])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 in_port=1 actions=output:2
 in_port=2 actions=output:1
 table=1, in_port=4 actions=output:3
OFPST_FLOW reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-aggregate br0 table=0 | strip_xids], [0], [dnl
OFPST_AGGREGATE reply (OF1.1): packet_count=0 byte_count=0 flow_count=2
])
AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply (OF1.1):
 table=1, in_port=4 actions=output:3
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - flow_mod negative test (OpenFlow 1.1)])
OVS_VSWITCHD_START(
  [set bridge br0 protocols=OpenFlow10,OpenFlow11,OpenFlow12,OpenFlow13])
AT_CHECK([ovs-ofctl add-flow -O OpenFlow11 br0 table=1,action=goto_table:2])

# The error message here actually comes from ovs-ofctl, not from ovs-vswitchd,
# but at least it's the same code in ofpacts_check() that issues the error.
AT_CHECK([ovs-ofctl add-flow -O OpenFlow11 br0 table=1,action=goto_table:1],
  [1], [],
  [ovs-ofctl: actions are invalid with specified match (OFPBIC_BAD_TABLE_ID)
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - set-field flow_mod commands (NXM)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 ipv6,table=1,in_port=3,actions=drop])
AT_CHECK([ovs-ofctl add-flow br0 ipv6,table=1,in_port=3,actions=set_field:fe80:0123:4567:890a:a6ba:dbff:fefe:59fa-\>ipv6_src])
AT_CHECK([ovs-ofctl add-flow br0 icmp6,icmp_type=136,table=1,in_port=3,actions=set_field:fe80:8675:3097:890a:a6ba:dbff:f00d:59fa-\>nd_target,set_field:cc:dd:ee:ff:00:11-\>nd_tll])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 table=1, icmp6,in_port=3,icmp_type=136 actions=load:0xa6badbfff00d59fa->NXM_NX_ND_TARGET[[0..63]],load:0xfe8086753097890a->NXM_NX_ND_TARGET[[64..127]],load:0xccddeeff0011->NXM_NX_ND_TLL[[]]
 table=1, ipv6,in_port=3 actions=load:0xa6badbfffefe59fa->NXM_NX_IPV6_SRC[[0..63]],load:0xfe8001234567890a->NXM_NX_IPV6_SRC[[64..127]]
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - basic flow_mod commands (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply (OF1.2):
])
AT_CHECK([echo 'in_port=2,actions=1' | ovs-ofctl -O OpenFlow12 add-flows br0 -])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=1,actions=2])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 table=1,in_port=4,actions=3])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 in_port=1 actions=output:2
 in_port=2 actions=output:1
 table=1, in_port=4 actions=output:3
OFPST_FLOW reply (OF1.2):
])
AT_CHECK([ovs-ofctl -O OpenFlow12 del-flows br0])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip], [0], [OFPST_FLOW reply (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - set-field flow_mod commands (OF1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 ipv6,table=1,in_port=3,actions=drop])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 ipv6,table=1,in_port=3,actions=set_field:fe80:0123:4567:890a:a6ba:dbff:fefe:59fa-\>ipv6_src])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 icmp6,icmp_type=136,table=1,in_port=3,actions=set_field:fe80:8675:3097:890a:a6ba:dbff:f00d:59fa-\>nd_target,set_field:cc:dd:ee:ff:00:11-\>nd_tll])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 table=1, icmp6,in_port=3,icmp_type=136 actions=set_field:fe80:8675:3097:890a:a6ba:dbff:f00d:59fa->nd_target,set_field:cc:dd:ee:ff:00:11->nd_tll
 table=1, ipv6,in_port=3 actions=set_field:fe80:123:4567:890a:a6ba:dbff:fefe:59fa->ipv6_src
OFPST_FLOW reply (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - dump flows with cookie])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x2, in_port=2 actions=output:1
 cookie=0x3, in_port=3 actions=output:1
NXST_FLOW reply:
])
AT_CHECK([ovs-ofctl dump-aggregate br0 table=0 | strip_xids], [0], [dnl
NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=3
])
AT_CHECK([ovs-ofctl dump-flows br0 cookie=0x3/-1 | ofctl_strip | sort], [0], [dnl
 cookie=0x3, in_port=3 actions=output:1
NXST_FLOW reply:
])
AT_CHECK([ovs-ofctl dump-aggregate br0 cookie=0x3/-1 | strip_xids], [0], [dnl
NXST_AGGREGATE reply: packet_count=0 byte_count=0 flow_count=1
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod flow with cookie change (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -F openflow10 add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
OFPST_FLOW reply:
])

AT_CHECK([ovs-ofctl -F openflow10 mod-flows br0 cookie=0x2,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x2, in_port=1 actions=output:1
OFPST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod flow with cookie change (NXM)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -F nxm add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
NXST_FLOW reply:
])

AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=0x2,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x2, in_port=1 actions=output:1
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - no mod flow with cookie change (OpenFlow 1.1)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
OFPST_FLOW reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 mod-flows br0 cookie=0x2,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
OFPST_FLOW reply (OF1.1):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl The OpenFlow 1.2 spec states that the cookie may not be modified
AT_SETUP([ofproto - no mod flow with cookie change (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
OFPST_FLOW reply (OF1.2):
])

AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 cookie=0x2,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
OFPST_FLOW reply (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod flows based on cookie mask (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=2,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=3,actions=1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x1, in_port=2 actions=output:1
 cookie=0x2, in_port=3 actions=output:1
NXST_FLOW reply:
])

AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=0x1/0xff,actions=4])
AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:4
 cookie=0x1, in_port=2 actions=output:4
 cookie=0x2, in_port=3 actions=output:1
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod flows based on cookie mask (OpenFlow 1.1)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=2,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x2,in_port=3,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x1, in_port=2 actions=output:1
 cookie=0x2, in_port=3 actions=output:1
OFPST_FLOW reply (OF1.1):
])

AT_CHECK([ovs-ofctl -O OpenFlow11 mod-flows br0 cookie=0x1/0xff,actions=4])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:4
 cookie=0x1, in_port=2 actions=output:4
 cookie=0x2, in_port=3 actions=output:1
OFPST_FLOW reply (OF1.1):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod flows based on cookie mask (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=2,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x2,in_port=3,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x1, in_port=2 actions=output:1
 cookie=0x2, in_port=3 actions=output:1
OFPST_FLOW reply (OF1.2):
])

AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 cookie=0x1/0xff,actions=4])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:4
 cookie=0x1, in_port=2 actions=output:4
 cookie=0x2, in_port=3 actions=output:1
OFPST_FLOW reply (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl The OpenFlow 1.2 spec states that the cookie may not be modified
AT_SETUP([ofproto - mod flows based on cookie mask with cookie change])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=2,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=3,actions=1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x1, in_port=2 actions=output:1
 cookie=0x2, in_port=3 actions=output:1
NXST_FLOW reply:
])

AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=1/-1,cookie=4,actions=4])
AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x2, in_port=3 actions=output:1
 cookie=0x4, in_port=1 actions=output:4
 cookie=0x4, in_port=2 actions=output:4
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod flow with cookie miss (mask==0) - NXM])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -F nxm mod-flows br0 in_port=1,actions=1])
AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
 in_port=1 actions=output:1
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod flow with cookie miss (mask==0) - OF1.1])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O openflow11 mod-flows br0 in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O openflow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 in_port=1 actions=output:1
OFPST_FLOW reply (OF1.1):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod flow with cookie miss (mask==0) - OF1.2])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O openflow12 mod-flows br0 in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O openflow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
OFPST_FLOW reply (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod flow with cookie miss (mask!=0) - NXM])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -F nxm mod-flows br0 cookie=1/1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -F nxm dump-flows br0 | ofctl_strip | sort], [0], [dnl
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod flow with cookie miss (mask!=0) - OF1.1])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O openflow11 mod-flows br0 cookie=1/1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O openflow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
OFPST_FLOW reply (OF1.1):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - mod flow with cookie miss (mask!=0) - OF1.2])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O openflow12 mod-flows br0 cookie=1/1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O openflow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
OFPST_FLOW reply (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - del flows with cookies])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x2, in_port=2 actions=output:1
 cookie=0x3, in_port=3 actions=output:1
NXST_FLOW reply:
])

AT_CHECK([ovs-ofctl del-flows br0])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - del flows based on cookie])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x2, in_port=2 actions=output:1
 cookie=0x3, in_port=3 actions=output:1
NXST_FLOW reply:
])

AT_CHECK([ovs-ofctl del-flows br0 cookie=0x3/-1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x2, in_port=2 actions=output:1
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - del flows based on cookie mask])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x3,in_port=3,actions=1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x2, in_port=2 actions=output:1
 cookie=0x3, in_port=3 actions=output:1
NXST_FLOW reply:
])
AT_CHECK([ovs-ofctl del-flows br0 cookie=0x3/0x1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x2, in_port=2 actions=output:1
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - del flows based on table id (NXM)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x2, table=1, in_port=2 actions=output:1
NXST_FLOW reply:
])
AT_CHECK([ovs-ofctl del-flows br0 table=0])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x2, table=1, in_port=2 actions=output:1
NXST_FLOW reply:
])
AT_CHECK([ovs-ofctl del-flows br0 table=1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
NXST_FLOW reply:
])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x2, table=1, in_port=2 actions=output:1
NXST_FLOW reply:
])
AT_CHECK([ovs-ofctl del-flows br0])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - del flows based on table id (OpenFlow 1.1)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x2, table=1, in_port=2 actions=output:1
OFPST_FLOW reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 table=0])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x2, table=1, in_port=2 actions=output:1
OFPST_FLOW reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 table=1])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
OFPST_FLOW reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow11 add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x2, table=1, in_port=2 actions=output:1
OFPST_FLOW reply (OF1.1):
])
AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0])
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip], [0], [dnl
OFPST_FLOW reply (OF1.1):
 cookie=0x2, table=1, in_port=2 actions=output:1
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - del flows based on table id (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x2, table=1, in_port=2 actions=output:1
OFPST_FLOW reply (OF1.2):
])
AT_CHECK([ovs-ofctl -O OpenFlow12 del-flows br0 table=0])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x2, table=1, in_port=2 actions=output:1
OFPST_FLOW reply (OF1.2):
])
AT_CHECK([ovs-ofctl -O OpenFlow12 del-flows br0 table=1])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
OFPST_FLOW reply (OF1.2):
])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x1,in_port=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 cookie=0x2,in_port=2,table=1,actions=1])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 cookie=0x1, in_port=1 actions=output:1
 cookie=0x2, table=1, in_port=2 actions=output:1
OFPST_FLOW reply (OF1.2):
])
AT_CHECK([ovs-ofctl -O OpenFlow12 del-flows br0])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
OFPST_FLOW reply (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - flow_mod with out_port matching (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_DATA([flows.txt], [dnl
 in_port=1 actions=output:2
 in_port=2 actions=output:1,output:2,output:3
 in_port=3 actions=output:3,output:1,output:2
 in_port=4 actions=drop
 in_port=5 actions=output:3
 in_port=6 actions=output:1
])
AT_CHECK([ovs-ofctl -F openflow10 add-flows br0 flows.txt])
(cat flows.txt; echo 'OFPST_FLOW reply:') > expout
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0],
  [expout])

(grep 'output:2' flows.txt; echo 'OFPST_FLOW reply:') > expout
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 out_port=2 | ofctl_strip | sort], [0], [expout])

AT_CHECK([ovs-ofctl -F openflow10 del-flows br0 out_port=2])
(grep -v 'output:2' flows.txt; echo 'OFPST_FLOW reply:') > expout
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0],
  [expout])

AT_CHECK([ovs-ofctl -F openflow10 del-flows br0 out_port=3])
(grep -v 'output:[[23]]' flows.txt; echo 'OFPST_FLOW reply:') > expout
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0],
  [expout])

AT_CHECK([ovs-ofctl -F openflow10 del-flows br0 out_port=1])
(grep -v 'output:[[123]]' flows.txt; echo 'OFPST_FLOW reply:') > expout
AT_CHECK([ovs-ofctl -F openflow10 dump-flows br0 | ofctl_strip | sort], [0],
  [expout])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - flow_mod with out_port matching (OpenFlow 1.1)])
OVS_VSWITCHD_START
AT_DATA([flows.txt], [dnl
 in_port=1 actions=output:2
 in_port=2 actions=output:1,write_actions(output:2,output:3)
 in_port=3 actions=output:3,output:1,write_actions(output:2)
 in_port=4 actions=drop
 in_port=5 actions=write_actions(output:3)
 in_port=6 actions=output:1
])
AT_CHECK([ovs-ofctl -O OpenFlow11 add-flows br0 flows.txt])
(cat flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
  [expout])

(grep 'output:2' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 out_port=2 | ofctl_strip | sort], [0], [expout])

AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 out_port=2])
(grep -v 'output:2' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
  [expout])

AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 out_port=3])
(grep -v 'output:[[23]]' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
  [expout])

AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 out_port=1])
(grep -v 'output:[[123]]' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
  [expout])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - flow_mod with out_group matching (OpenFlow 1.1)])
OVS_VSWITCHD_START
AT_DATA([groups.txt], [dnl
group_id=1,type=all,bucket=output:10
group_id=2,type=all,bucket=output:10
group_id=3,type=all,bucket=output:10
])
AT_CHECK([ovs-ofctl -O OpenFlow11 add-groups br0 groups.txt])
AT_DATA([flows.txt], [dnl
 in_port=1 actions=group:2,output:5
 in_port=2 actions=group:1,write_actions(group:2,group:3,output:6)
 in_port=3 actions=group:3,group:1,write_actions(group:2,output:3)
 in_port=4 actions=output:4
 in_port=5 actions=write_actions(output:4,group:3)
 in_port=6 actions=group:1
])
AT_CHECK([ovs-ofctl -O OpenFlow11 add-flows br0 flows.txt])
(cat flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
  [expout])

(grep 'output:3' flows.txt | grep 'group:2'; echo 'OFPST_FLOW reply (OF1.1):') > expout
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 out_port=3,out_group=2 | ofctl_strip | sort], [0], [expout])

AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 out_group=2])
(grep -v 'group:2' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
  [expout])

AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 out_group=3])
(grep -v 'group:[[23]]' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
  [expout])

AT_CHECK([ovs-ofctl -O OpenFlow11 del-flows br0 out_group=1])
(grep -v 'group:[[123]]' flows.txt; echo 'OFPST_FLOW reply (OF1.1):') > expout
AT_CHECK([ovs-ofctl -O OpenFlow11 dump-flows br0 | ofctl_strip | sort], [0],
  [expout])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - flow table configuration (OpenFlow 1.0)])
OVS_VSWITCHD_START
# Check the default configuration.
head_table() {
    printf 'OFPST_TABLE reply (xid=0x2):
  table 0 ("%s"):
    active=0, lookup=0, matched=0
    max_entries=1000000
    matching:
      in_port: exact match or wildcard
      eth_src: exact match or wildcard
      eth_dst: exact match or wildcard
      eth_type: exact match or wildcard
      vlan_vid: exact match or wildcard
      vlan_pcp: exact match or wildcard
      ip_src: exact match or wildcard
      ip_dst: exact match or wildcard
      nw_proto: exact match or wildcard
      nw_tos: exact match or wildcard
      tcp_src: exact match or wildcard
      tcp_dst: exact match or wildcard

' $1
}
ditto() {
    for i in `seq $1 $2`; do
        printf '  table %d ("table%d"): ditto\n' $i $i
    done
}
(head_table classifier; ditto 1 253) > expout
AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
# Change the configuration.
AT_CHECK(
  [ovs-vsctl \
     -- --id=@t0 create Flow_Table name=main \
     -- --id=@t1 create Flow_Table flow-limit=1024 \
     -- set bridge br0 'flow_tables={1=@t1,0=@t0}' \
   | ${PERL} $srcdir/uuidfilt.pl],
  [0], [<0>
<1>
])
# Check that the configuration was updated.
(head_table main; echo '  table 1 ("table1"):
    active=0, lookup=0, matched=0
    max_entries=1024
    (same matching)

  table 2 ("table2"):
    active=0, lookup=0, matched=0
    max_entries=1000000
    (same matching)
'; ditto 3 253) > expout
AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl In-band and fail-open add "hidden rules" to table 0.  These rules shouldn't
dnl be visible to OpenFlow.  This test checks that "dump-flows" and
dnl "dump-tables" don't make them visible.
AT_SETUP([ofproto - hidden rules not in table stats])
# Use an IP address for a controller that won't actually exist: we
# want to create in-band rules but we do not want to actually connect
# to a controller (because that could mess about with our test).  The
# Class E range 240.0.0.0 - 255.255.255.255 seems like a good choice.
OVS_VSWITCHD_START([set-controller br0 tcp:240.0.0.1:6653])
for i in 1 2 3 4 5; do ovs-appctl time/warp 1000; done

# Check that no hidden flows are visible in OpenFlow.
AT_CHECK([ovs-ofctl dump-flows br0], [0], [NXST_FLOW reply (xid=0x4):
])

# Check that some hidden flows related to 240.0.0.1 are actually in table 0.
#
# We discard flows that mention table_id because we only want table 0 flows,
# which in OVS is implied by the absence of a table_id.
AT_CHECK([ovs-appctl bridge/dump-flows br0], [0], [stdout])
AT_CHECK([test `grep '240\.0\.0\.1' stdout | grep -v table_id= | wc -l` -gt 0])

# Check that dump-tables doesn't count the hidden flows.
head_table() {
    printf 'OFPST_TABLE reply (xid=0x2):
  table 0 ("%s"):
    active=0, lookup=0, matched=0
    max_entries=1000000
    matching:
      in_port: exact match or wildcard
      eth_src: exact match or wildcard
      eth_dst: exact match or wildcard
      eth_type: exact match or wildcard
      vlan_vid: exact match or wildcard
      vlan_pcp: exact match or wildcard
      ip_src: exact match or wildcard
      ip_dst: exact match or wildcard
      nw_proto: exact match or wildcard
      nw_tos: exact match or wildcard
      tcp_src: exact match or wildcard
      tcp_dst: exact match or wildcard

' $1
}
ditto() {
    for i in `seq $1 $2`; do
        printf '  table %d ("table%d"): ditto\n' $i $i
    done
}
(head_table classifier; ditto 1 253) > expout
AT_CHECK([ovs-ofctl dump-tables br0], [0], [expout])
OVS_VSWITCHD_STOP(["/240\.0\.0\.1/d"])
AT_CLEANUP

AT_SETUP([ofproto - flow table configuration (OpenFlow 1.2)])
OVS_VSWITCHD_START
# Check the default configuration.
head_table() {
    printf 'OFPST_TABLE reply (OF1.2) (xid=0x2):
  table 0 ("%s"):
    active=0, lookup=0, matched=0
    metadata: match=0xffffffffffffffff write=0xffffffffffffffff
    config=controller
    max_entries=1000000
    instructions (table miss and others):
      instructions: apply_actions,clear_actions,write_actions,write_metadata,goto_table
      Write-Actions and Apply-Actions features:
        actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
        supported on Set-Field: metadata in_port_oxm eth_src eth_dst vlan_vid vlan_pcp mpls_label mpls_tc ip_src ip_dst ipv6_src ipv6_dst ipv6_label ip_dscp nw_ecn arp_op arp_spa arp_tpa arp_sha arp_tha tcp_src tcp_dst udp_src udp_dst sctp_src sctp_dst icmp_type icmp_code icmpv6_type icmpv6_code nd_target nd_sll nd_tll
    matching:
      metadata: exact match or wildcard
      in_port_oxm: exact match or wildcard
      eth_src: exact match or wildcard
      eth_dst: exact match or wildcard
      eth_type: exact match or wildcard
      vlan_vid: exact match or wildcard
      vlan_pcp: exact match or wildcard
      mpls_label: exact match or wildcard
      mpls_tc: exact match or wildcard
      ip_src: exact match or wildcard
      ip_dst: exact match or wildcard
      ipv6_src: exact match or wildcard
      ipv6_dst: exact match or wildcard
      ipv6_label: exact match or wildcard
      nw_proto: exact match or wildcard
      ip_dscp: exact match or wildcard
      nw_ecn: exact match or wildcard
      arp_op: exact match or wildcard
      arp_spa: exact match or wildcard
      arp_tpa: exact match or wildcard
      arp_sha: exact match or wildcard
      arp_tha: exact match or wildcard
      tcp_src: exact match or wildcard
      tcp_dst: exact match or wildcard
      udp_src: exact match or wildcard
      udp_dst: exact match or wildcard
      sctp_src: exact match or wildcard
      sctp_dst: exact match or wildcard
      icmp_type: exact match or wildcard
      icmp_code: exact match or wildcard
      icmpv6_type: exact match or wildcard
      icmpv6_code: exact match or wildcard
      nd_target: exact match or wildcard
      nd_sll: exact match or wildcard
      nd_tll: exact match or wildcard

' $1
}
ditto() {
    for i in `seq $1 $2`; do
        printf '  table %d ("table%d"): ditto\n' $i $i
    done
}
tail_table() {
    printf '  table 253 ("table253"):
    active=0, lookup=0, matched=0
    metadata: match=0xffffffffffffffff write=0xffffffffffffffff
    config=controller
    max_entries=1000000
    instructions (table miss and others):
      instructions: apply_actions,clear_actions,write_actions,write_metadata
      (same actions)
    (same matching)
'
}
(head_table classifier; ditto 1 252; tail_table) > expout
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-tables br0], [0], [expout])
# Change the configuration.
AT_CHECK(
  [ovs-vsctl \
     -- --id=@t0 create Flow_Table name=main \
     -- --id=@t1 create Flow_Table flow-limit=1024 \
     -- set bridge br0 'flow_tables={1=@t1,0=@t0}' \
   | ${PERL} $srcdir/uuidfilt.pl],
  [0], [<0>
<1>
])
# Check that the configuration was updated.
(head_table main; echo '  table 1 ("table1"):
    active=0, lookup=0, matched=0
    metadata: match=0xffffffffffffffff write=0xffffffffffffffff
    config=controller
    max_entries=1024
    (same instructions)
    (same matching)

  table 2 ("table2"):
    active=0, lookup=0, matched=0
    metadata: match=0xffffffffffffffff write=0xffffffffffffffff
    config=controller
    max_entries=1000000
    (same instructions)
    (same matching)
'; ditto 3 252; tail_table) > expout
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-tables br0], [0], [expout])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - table features (OpenFlow 1.3)])
OVS_VSWITCHD_START
head_table () {
    printf '  table 0 ("%s"):
    metadata: match=0xffffffffffffffff write=0xffffffffffffffff
    max_entries=1000000
    instructions (table miss and others):
      next tables: 1-253
      instructions: meter,apply_actions,clear_actions,write_actions,write_metadata,goto_table
      Write-Actions and Apply-Actions features:
        actions: output group set_field strip_vlan push_vlan mod_nw_ttl dec_ttl set_mpls_ttl dec_mpls_ttl push_mpls pop_mpls set_queue
        supported on Set-Field: tun_id tun_src tun_dst tun_ipv6_src tun_ipv6_dst tun_flags tun_gbp_id tun_gbp_flags tun_metadata0 dnl
tun_metadata1 tun_metadata2 tun_metadata3 tun_metadata4 tun_metadata5 tun_metadata6 tun_metadata7 tun_metadata8 tun_metadata9 tun_metadata10 tun_metadata11 tun_metadata12 tun_metadata13 tun_metadata14 tun_metadata15 tun_metadata16 tun_metadata17 tun_metadata18 tun_metadata19 tun_metadata20 tun_metadata21 tun_metadata22 tun_metadata23 tun_metadata24 tun_metadata25 tun_metadata26 tun_metadata27 tun_metadata28 tun_metadata29 tun_metadata30 tun_metadata31 tun_metadata32 tun_metadata33 tun_metadata34 tun_metadata35 tun_metadata36 tun_metadata37 tun_metadata38 tun_metadata39 tun_metadata40 tun_metadata41 tun_metadata42 tun_metadata43 tun_metadata44 tun_metadata45 tun_metadata46 tun_metadata47 tun_metadata48 tun_metadata49 tun_metadata50 tun_metadata51 tun_metadata52 tun_metadata53 tun_metadata54 tun_metadata55 tun_metadata56 tun_metadata57 tun_metadata58 tun_metadata59 tun_metadata60 tun_metadata61 tun_metadata62 tun_metadata63 dnl
metadata in_port in_port_oxm pkt_mark ct_mark ct_label reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 xreg0 xreg1 xreg2 xreg3 eth_src eth_dst vlan_tci vlan_vid vlan_pcp mpls_label mpls_tc mpls_ttl ip_src ip_dst ipv6_src ipv6_dst ipv6_label nw_tos ip_dscp nw_ecn nw_ttl arp_op arp_spa arp_tpa arp_sha arp_tha tcp_src tcp_dst udp_src udp_dst sctp_src sctp_dst icmp_type icmp_code icmpv6_type icmpv6_code nd_target nd_sll nd_tll
    matching:
      dp_hash: arbitrary mask
      recirc_id: exact match or wildcard
      conj_id: exact match or wildcard
      tun_id: arbitrary mask
      tun_src: arbitrary mask
      tun_dst: arbitrary mask
      tun_ipv6_src: arbitrary mask
      tun_ipv6_dst: arbitrary mask
      tun_flags: arbitrary mask
      tun_gbp_id: arbitrary mask
      tun_gbp_flags: arbitrary mask
      tun_metadata0: arbitrary mask
      tun_metadata1: arbitrary mask
      tun_metadata2: arbitrary mask
      tun_metadata3: arbitrary mask
      tun_metadata4: arbitrary mask
      tun_metadata5: arbitrary mask
      tun_metadata6: arbitrary mask
      tun_metadata7: arbitrary mask
      tun_metadata8: arbitrary mask
      tun_metadata9: arbitrary mask
      tun_metadata10: arbitrary mask
      tun_metadata11: arbitrary mask
      tun_metadata12: arbitrary mask
      tun_metadata13: arbitrary mask
      tun_metadata14: arbitrary mask
      tun_metadata15: arbitrary mask
      tun_metadata16: arbitrary mask
      tun_metadata17: arbitrary mask
      tun_metadata18: arbitrary mask
      tun_metadata19: arbitrary mask
      tun_metadata20: arbitrary mask
      tun_metadata21: arbitrary mask
      tun_metadata22: arbitrary mask
      tun_metadata23: arbitrary mask
      tun_metadata24: arbitrary mask
      tun_metadata25: arbitrary mask
      tun_metadata26: arbitrary mask
      tun_metadata27: arbitrary mask
      tun_metadata28: arbitrary mask
      tun_metadata29: arbitrary mask
      tun_metadata30: arbitrary mask
      tun_metadata31: arbitrary mask
      tun_metadata32: arbitrary mask
      tun_metadata33: arbitrary mask
      tun_metadata34: arbitrary mask
      tun_metadata35: arbitrary mask
      tun_metadata36: arbitrary mask
      tun_metadata37: arbitrary mask
      tun_metadata38: arbitrary mask
      tun_metadata39: arbitrary mask
      tun_metadata40: arbitrary mask
      tun_metadata41: arbitrary mask
      tun_metadata42: arbitrary mask
      tun_metadata43: arbitrary mask
      tun_metadata44: arbitrary mask
      tun_metadata45: arbitrary mask
      tun_metadata46: arbitrary mask
      tun_metadata47: arbitrary mask
      tun_metadata48: arbitrary mask
      tun_metadata49: arbitrary mask
      tun_metadata50: arbitrary mask
      tun_metadata51: arbitrary mask
      tun_metadata52: arbitrary mask
      tun_metadata53: arbitrary mask
      tun_metadata54: arbitrary mask
      tun_metadata55: arbitrary mask
      tun_metadata56: arbitrary mask
      tun_metadata57: arbitrary mask
      tun_metadata58: arbitrary mask
      tun_metadata59: arbitrary mask
      tun_metadata60: arbitrary mask
      tun_metadata61: arbitrary mask
      tun_metadata62: arbitrary mask
      tun_metadata63: arbitrary mask
      metadata: arbitrary mask
      in_port: exact match or wildcard
      in_port_oxm: exact match or wildcard
      actset_output: exact match or wildcard
      pkt_mark: arbitrary mask
      ct_state: arbitrary mask
      ct_zone: exact match or wildcard
      ct_mark: arbitrary mask
      ct_label: arbitrary mask
      reg0: arbitrary mask
      reg1: arbitrary mask
      reg2: arbitrary mask
      reg3: arbitrary mask
      reg4: arbitrary mask
      reg5: arbitrary mask
      reg6: arbitrary mask
      reg7: arbitrary mask
      xreg0: arbitrary mask
      xreg1: arbitrary mask
      xreg2: arbitrary mask
      xreg3: arbitrary mask
      eth_src: arbitrary mask
      eth_dst: arbitrary mask
      eth_type: exact match or wildcard
      vlan_tci: arbitrary mask
      vlan_vid: arbitrary mask
      vlan_pcp: exact match or wildcard
      mpls_label: exact match or wildcard
      mpls_tc: exact match or wildcard
      mpls_bos: exact match or wildcard
      mpls_ttl: exact match or wildcard
      ip_src: arbitrary mask
      ip_dst: arbitrary mask
      ipv6_src: arbitrary mask
      ipv6_dst: arbitrary mask
      ipv6_label: arbitrary mask
      nw_proto: exact match or wildcard
      nw_tos: exact match or wildcard
      ip_dscp: exact match or wildcard
      nw_ecn: exact match or wildcard
      nw_ttl: exact match or wildcard
      ip_frag: arbitrary mask
      arp_op: exact match or wildcard
      arp_spa: arbitrary mask
      arp_tpa: arbitrary mask
      arp_sha: arbitrary mask
      arp_tha: arbitrary mask
      tcp_src: arbitrary mask
      tcp_dst: arbitrary mask
      tcp_flags: arbitrary mask
      udp_src: arbitrary mask
      udp_dst: arbitrary mask
      sctp_src: arbitrary mask
      sctp_dst: arbitrary mask
      icmp_type: exact match or wildcard
      icmp_code: exact match or wildcard
      icmpv6_type: exact match or wildcard
      icmpv6_code: exact match or wildcard
      nd_target: arbitrary mask
      nd_sll: arbitrary mask
      nd_tll: arbitrary mask

' $1
}
ditto() {
    printf '  table %d ("%s"):
    metadata: match=0xffffffffffffffff write=0xffffffffffffffff
    max_entries=%d
    instructions (table miss and others):
      next tables: %d-253
      (same instructions)
      (same actions)
    (same matching)

' $1 $2 $3 `expr $1 + 1`
}
tail_tables() {
echo '  table 252 ("table252"):
    metadata: match=0xffffffffffffffff write=0xffffffffffffffff
    max_entries=1000000
    instructions (table miss and others):
      next tables: 253
      (same instructions)
      (same actions)
    (same matching)

  table 253 ("table253"):
    metadata: match=0xffffffffffffffff write=0xffffffffffffffff
    max_entries=1000000
    instructions (table miss and others):
      instructions: meter,apply_actions,clear_actions,write_actions,write_metadata
      (same actions)
    (same matching)
'
}
(head_table classifier
 for i in `seq 1 251`; do
     ditto $i table$i 1000000
 done
 tail_tables) > expout
AT_CHECK([ovs-ofctl -O OpenFlow13 dump-table-features br0], [0], [expout])
# Change the configuration.
AT_CHECK(
  [ovs-vsctl \
     -- --id=@t0 create Flow_Table name=main \
     -- --id=@t1 create Flow_Table flow-limit=1024 \
     -- set bridge br0 'flow_tables={1=@t1,0=@t0}' \
   | ${PERL} $srcdir/uuidfilt.pl],
  [0], [<0>
<1>
])
# Check that the configuration was updated.
(head_table main
 ditto 1 table1 1024
 for i in `seq 2 251`; do
     ditto $i table$i 1000000
 done
 tail_tables) > expout
AT_CHECK([ovs-ofctl -O OpenFlow13 dump-table-features br0], [0], [expout])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - table description (OpenFlow 1.4)])
OVS_VSWITCHD_START
(x=0
 while test $x -lt 254; do
   y=`expr $x + 1`
   echo "  table $x:
   eviction=off eviction_flags=OTHER|IMPORTANCE|LIFETIME
   vacancy=off"
   x=$y
 done) > expout
AT_CHECK([ovs-ofctl -O OpenFlow14 dump-table-desc br0 | sed '/^$/d
/^OFPST_TABLE_DESC/d'], [0], [expout])

# Change the configuration.
AT_CHECK([ovs-ofctl -O Openflow14 mod-table br0 0 evict])
# Check that the configuration was updated.
mv expout orig-expout
sed -e '2s/eviction=off/eviction=on/' <orig-expout > expout
AT_CHECK([ovs-ofctl -O OpenFlow14 dump-table-desc br0 | sed '/^$/d
/^OFPST_TABLE_DESC/d'], [0], [expout])

AT_CHECK([ovs-ofctl -O Openflow14 mod-table br0 0 vacancy:20,80])
# Check that the configuration was updated.
mv expout orig-expout
sed -e '3s/vacancy=off/vacancy=on vacancy_down=20% vacancy_up=80% vacancy=100%/' <orig-expout > expout
AT_CHECK([ovs-ofctl -O OpenFlow14 dump-table-desc br0 | sed '/^$/d
/^OFPST_TABLE_DESC/d'], [0], [expout])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - hard limits on flow table size (OpenFlow 1.0)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
  [ovs-vsctl \
     -- --id=@t0 create Flow_Table flow-limit=4 \
     -- set bridge br0 flow_tables:0=@t0 \
   | ${PERL} $srcdir/uuidfilt.pl],
  [0], [<0>
])
# Add 4 flows.
for in_port in 1 2 3 4; do
    ovs-ofctl add-flow br0 in_port=$in_port,actions=drop
done
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 in_port=1 actions=drop
 in_port=2 actions=drop
 in_port=3 actions=drop
 in_port=4 actions=drop
NXST_FLOW reply:
])
# Adding another flow will be refused.
AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop], [1], [], [stderr])
AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
  [OFPT_ERROR: OFPFMFC_TABLE_FULL
])
# Also a mod-flow that would add a flow will be refused.
AT_CHECK([ovs-ofctl mod-flows br0 in_port=5,actions=drop], [1], [], [stderr])
AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
  [OFPT_ERROR: OFPFMFC_TABLE_FULL
])
# Replacing or modifying an existing flow is allowed.
AT_CHECK([ovs-ofctl add-flow br0 in_port=4,actions=normal])
AT_CHECK([ovs-ofctl mod-flows br0 in_port=3,actions=output:1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 in_port=1 actions=drop
 in_port=2 actions=drop
 in_port=3 actions=output:1
 in_port=4 actions=NORMAL
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - hard limits on flow table size (OpenFlow 1.2)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
  [ovs-vsctl \
     -- --id=@t0 create Flow_Table flow-limit=4 \
     -- set bridge br0 flow_tables:0=@t0 \
   | ${PERL} $srcdir/uuidfilt.pl],
  [0], [<0>
])
# Add 4 flows.
for in_port in 1 2 3 4; do
    ovs-ofctl -O OpenFlow12 add-flow br0 in_port=$in_port,actions=drop
done
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 in_port=1 actions=drop
 in_port=2 actions=drop
 in_port=3 actions=drop
 in_port=4 actions=drop
OFPST_FLOW reply (OF1.2):
])
# Adding another flow will be refused.
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=5,actions=drop], [1], [], [stderr])
AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
  [OFPT_ERROR (OF1.2): OFPFMFC_TABLE_FULL
])
# Replacing or modifying an existing flow is allowed.
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=4,actions=normal])
AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 in_port=3,actions=output:1])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 in_port=1 actions=drop
 in_port=2 actions=drop
 in_port=3 actions=output:1
 in_port=4 actions=NORMAL
OFPST_FLOW reply (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - eviction upon table overflow (OpenFlow 1.0)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
  [ovs-vsctl \
     -- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
     -- set bridge br0 flow_tables:0=@t0 \
   | ${PERL} $srcdir/uuidfilt.pl],
  [0], [<0>
])
# Add 4 flows.
for in_port in 4 3 2 1; do
    ovs-ofctl add-flow br0 idle_timeout=${in_port}0,in_port=$in_port,actions=drop
done
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=10, in_port=1 actions=drop
 idle_timeout=20, in_port=2 actions=drop
 idle_timeout=30, in_port=3 actions=drop
 idle_timeout=40, in_port=4 actions=drop
NXST_FLOW reply:
])
# Adding another flow will cause the one that expires soonest to be evicted.
AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=20, in_port=2 actions=drop
 idle_timeout=30, in_port=3 actions=drop
 idle_timeout=40, in_port=4 actions=drop
 in_port=5 actions=drop
NXST_FLOW reply:
])
# A mod-flow that adds a flow also causes eviction, but replacing or
# modifying an existing flow doesn't.
AT_CHECK([ovs-ofctl mod-flows br0 in_port=6,actions=drop])
AT_CHECK([ovs-ofctl add-flow br0 in_port=4,actions=normal])
AT_CHECK([ovs-ofctl mod-flows br0 in_port=3,actions=output:1])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=30, in_port=3 actions=output:1
 in_port=4 actions=NORMAL
 in_port=5 actions=drop
 in_port=6 actions=drop
NXST_FLOW reply:
])
# Flows with no timeouts at all cannot be evicted.
AT_CHECK([ovs-ofctl add-flow br0 in_port=7,actions=normal])
AT_CHECK([ovs-ofctl add-flow br0 in_port=8,actions=drop], [1], [], [stderr])
AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
  [OFPT_ERROR: OFPFMFC_TABLE_FULL
])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 in_port=4 actions=NORMAL
 in_port=5 actions=drop
 in_port=6 actions=drop
 in_port=7 actions=NORMAL
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - eviction upon table overflow (OpenFlow 1.2)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
  [ovs-vsctl \
     -- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
     -- set bridge br0 flow_tables:0=@t0 \
   | ${PERL} $srcdir/uuidfilt.pl],
  [0], [<0>
])
# Add 4 flows.
for in_port in 4 3 2 1; do
    ovs-ofctl -O OpenFlow12 add-flow br0 idle_timeout=${in_port}0,in_port=$in_port,actions=drop
done
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=10, in_port=1 actions=drop
 idle_timeout=20, in_port=2 actions=drop
 idle_timeout=30, in_port=3 actions=drop
 idle_timeout=40, in_port=4 actions=drop
OFPST_FLOW reply (OF1.2):
])
# Adding another flow will cause the one that expires soonest to be evicted.
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=5,actions=drop])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=20, in_port=2 actions=drop
 idle_timeout=30, in_port=3 actions=drop
 idle_timeout=40, in_port=4 actions=drop
 in_port=5 actions=drop
OFPST_FLOW reply (OF1.2):
])
# In OpenFlow 1.2 a mod-flow does not ever add a flow and thus
# has no effect on eviction
AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 in_port=6,actions=drop])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=4,actions=normal])
AT_CHECK([ovs-ofctl -O OpenFlow12 mod-flows br0 in_port=3,actions=output:1])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=20, in_port=2 actions=drop
 idle_timeout=30, in_port=3 actions=output:1
 in_port=4 actions=NORMAL
 in_port=5 actions=drop
OFPST_FLOW reply (OF1.2):
])
# Flows with no timeouts at all cannot be evicted.
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=6,actions=drop])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=7,actions=normal])
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=8,actions=drop], [1], [], [stderr])
AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
  [OFPT_ERROR (OF1.2): OFPFMFC_TABLE_FULL
])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 in_port=4 actions=NORMAL
 in_port=5 actions=drop
 in_port=6 actions=drop
 in_port=7 actions=NORMAL
OFPST_FLOW reply (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - eviction using importance upon table overflow (OpenFlow 1.4)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
  [ovs-vsctl \
     -- --id=@t0 create Flow_Table name=evict flow-limit=4 \
     -- set bridge br0 flow_tables:0=@t0 \
   | ${PERL} $srcdir/uuidfilt.pl],
  [0], [<0>
])
# Use mod-table to turn on eviction just to demonstrate that it works.
AT_CHECK([ovs-ofctl -O OpenFlow14 mod-table br0 0 evict])
# Add 4 flows.
for in_port in 4 3 2 1; do
    ovs-ofctl -O Openflow14 add-flow br0 importance=$((in_port + 30)),priority=$((in_port + 5)),hard_timeout=$((in_port + 500)),actions=drop
done
AT_CHECK([ovs-ofctl -O Openflow14 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 hard_timeout=501, importance=31, priority=6 actions=drop
 hard_timeout=502, importance=32, priority=7 actions=drop
 hard_timeout=503, importance=33, priority=8 actions=drop
 hard_timeout=504, importance=34, priority=9 actions=drop
OFPST_FLOW reply (OF1.4):
])
# Adding another flow will cause the one with lowest importance to be evicted.
AT_CHECK([ovs-ofctl -O Openflow14 add-flow br0 hard_timeout=505,importance=35,priority=10,in_port=2,actions=drop])
AT_CHECK([ovs-ofctl -O Openflow14 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 hard_timeout=502, importance=32, priority=7 actions=drop
 hard_timeout=503, importance=33, priority=8 actions=drop
 hard_timeout=504, importance=34, priority=9 actions=drop
 hard_timeout=505, importance=35, priority=10,in_port=2 actions=drop
OFPST_FLOW reply (OF1.4):
])
# Disable the Eviction configuration.
AT_CHECK([ovs-ofctl -O OpenFlow14 mod-table br0 0 noevict])
# Adding another flow will cause the system to give error for FULL TABLE.
AT_CHECK([ovs-ofctl -O Openflow14 add-flow br0 hard_timeout=506,importance=36,priority=11,actions=drop],[1], [], [stderr])
AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
 [OFPT_ERROR (OF1.4): OFPFMFC_TABLE_FULL
])
#Dump flows. It should show only the old values
AT_CHECK([ovs-ofctl -O Openflow14 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 hard_timeout=502, importance=32, priority=7 actions=drop
 hard_timeout=503, importance=33, priority=8 actions=drop
 hard_timeout=504, importance=34, priority=9 actions=drop
 hard_timeout=505, importance=35, priority=10,in_port=2 actions=drop
OFPST_FLOW reply (OF1.4):
])
# mod-flow that would modify a flow will be done successfully.
AT_CHECK([ovs-ofctl -O Openflow14 mod-flows br0 in_port=2,actions=NORMAL])
AT_CHECK([ovs-ofctl -O Openflow14 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 hard_timeout=502, importance=32, priority=7 actions=drop
 hard_timeout=503, importance=33, priority=8 actions=drop
 hard_timeout=504, importance=34, priority=9 actions=drop
 hard_timeout=505, importance=35, priority=10,in_port=2 actions=NORMAL
OFPST_FLOW reply (OF1.4):
])
# Also a mod-flow that would add a flow will be refused.
AT_CHECK([ovs-ofctl mod-flows br0 in_port=5,actions=drop], [1], [], [stderr])
AT_CHECK([head -n 1 stderr | ofctl_strip], [0],
  [OFPT_ERROR: OFPFMFC_TABLE_FULL
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - eviction upon table overflow, with fairness (OpenFlow 1.0)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
  [ovs-vsctl \
     -- --id=@t0 create Flow_Table name=evict flow-limit=4 \
                                   overflow-policy=evict \
                                   groups='"NXM_OF_IN_PORT[[]]"' \
     -- set bridge br0 flow_tables:0=@t0 \
   | ${PERL} $srcdir/uuidfilt.pl],
  [0], [<0>
])
# Add 4 flows.
ovs-ofctl add-flows br0 - <<EOF
idle_timeout=10 in_port=2 dl_src=00:44:55:66:77:88 actions=drop
idle_timeout=20 in_port=1 dl_src=00:11:22:33:44:55 actions=drop
idle_timeout=30 in_port=1 dl_src=00:22:33:44:55:66 actions=drop
idle_timeout=40 in_port=1 dl_src=00:33:44:55:66:77 actions=drop
EOF
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
 idle_timeout=20, in_port=1,dl_src=00:11:22:33:44:55 actions=drop
 idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
 idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
NXST_FLOW reply:
])
# Adding another flow will cause the one that expires soonest within
# the largest group (those with in_port=1) to be evicted.  In this
# case this is not the same as the one that expires soonest overall
# (which is what makes the test interesting):
AT_CHECK([ovs-ofctl add-flow br0 in_port=2,dl_src=00:55:66:77:88:99,actions=drop])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
 idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
 idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
 in_port=2,dl_src=00:55:66:77:88:99 actions=drop
NXST_FLOW reply:
])
# Enlarge the flow limit, change the eviction policy back to strictly
# based on expiration, and and add some flows.
AT_CHECK([ovs-vsctl set Flow_Table evict groups='[[]]' flow-limit=7])
ovs-ofctl add-flows br0 - <<EOF
idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=drop
idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=drop
idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=drop
EOF
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
 idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
 idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
 idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
 in_port=2,dl_src=00:55:66:77:88:99 actions=drop
NXST_FLOW reply:
])
# Adding another flow will cause the one that expires soonest overall
# to be evicted.
AT_CHECK([ovs-ofctl add-flow br0 'idle_timeout=80 in_port=2 dl_src=00:99:aa:bb:cc:dd actions=drop'])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
 idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
 idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
 idle_timeout=80, in_port=2,dl_src=00:99:aa:bb:cc:dd actions=drop
 in_port=2,dl_src=00:55:66:77:88:99 actions=drop
NXST_FLOW reply:
])
# Reducing the flow limit also causes the flows that expire soonest
# overall to be evicted.
AT_CHECK([ovs-vsctl set Flow_Table evict flow-limit=4])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
 idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
 idle_timeout=80, in_port=2,dl_src=00:99:aa:bb:cc:dd actions=drop
 in_port=2,dl_src=00:55:66:77:88:99 actions=drop
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - eviction upon table overflow, with fairness (OpenFlow 1.2)])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
  [ovs-vsctl \
     -- --id=@t0 create Flow_Table name=evict flow-limit=4 \
                                   overflow-policy=evict \
                                   groups='"NXM_OF_IN_PORT[[]]"' \
     -- set bridge br0 flow_tables:0=@t0 \
   | ${PERL} $srcdir/uuidfilt.pl],
  [0], [<0>
])
# Add 4 flows.
ovs-ofctl -O OpenFlow12 add-flows br0 - <<EOF
idle_timeout=10 in_port=2 dl_src=00:44:55:66:77:88 actions=drop
idle_timeout=20 in_port=1 dl_src=00:11:22:33:44:55 actions=drop
idle_timeout=30 in_port=1 dl_src=00:22:33:44:55:66 actions=drop
idle_timeout=40 in_port=1 dl_src=00:33:44:55:66:77 actions=drop
EOF
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
 idle_timeout=20, in_port=1,dl_src=00:11:22:33:44:55 actions=drop
 idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
 idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
OFPST_FLOW reply (OF1.2):
])
# Adding another flow will cause the one that expires soonest within
# the largest group (those with in_port=1) to be evicted.  In this
# case this is not the same as the one that expires soonest overall
# (which is what makes the test interesting):
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 in_port=2,dl_src=00:55:66:77:88:99,actions=drop])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
 idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
 idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
 in_port=2,dl_src=00:55:66:77:88:99 actions=drop
OFPST_FLOW reply (OF1.2):
])
# Enlarge the flow limit, change the eviction policy back to strictly
# based on expiration, and and add some flows.
AT_CHECK([ovs-vsctl set Flow_Table evict groups='[[]]' flow-limit=7])
ovs-ofctl -O OpenFlow12 add-flows br0 - <<EOF
idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=drop
idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=drop
idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=drop
EOF
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=10, in_port=2,dl_src=00:44:55:66:77:88 actions=drop
 idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
 idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
 idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
 in_port=2,dl_src=00:55:66:77:88:99 actions=drop
OFPST_FLOW reply (OF1.2):
])
# Adding another flow will cause the one that expires soonest overall
# to be evicted.
AT_CHECK([ovs-ofctl -O OpenFlow12 add-flow br0 'idle_timeout=80 in_port=2 dl_src=00:99:aa:bb:cc:dd actions=drop'])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=30, in_port=1,dl_src=00:22:33:44:55:66 actions=drop
 idle_timeout=40, in_port=1,dl_src=00:33:44:55:66:77 actions=drop
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
 idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
 idle_timeout=80, in_port=2,dl_src=00:99:aa:bb:cc:dd actions=drop
 in_port=2,dl_src=00:55:66:77:88:99 actions=drop
OFPST_FLOW reply (OF1.2):
])
# Reducing the flow limit also causes the flows that expire soonest
# overall to be evicted.
AT_CHECK([ovs-vsctl set Flow_Table evict flow-limit=4])
AT_CHECK([ovs-ofctl -O OpenFlow12 dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=drop
 idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
 idle_timeout=80, in_port=2,dl_src=00:99:aa:bb:cc:dd actions=drop
 in_port=2,dl_src=00:55:66:77:88:99 actions=drop
OFPST_FLOW reply (OF1.2):
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - eviction upon table overflow, with modified hard timeout])
OVS_VSWITCHD_START
# Configure a maximum of 4 flows.
AT_CHECK(
  [ovs-vsctl \
     -- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
     -- set bridge br0 flow_tables:0=@t0 \
   | ${PERL} $srcdir/uuidfilt.pl],
  [0], [<0>
])
ovs-appctl time/stop
# Add 4 flows.
for in_port in 4 3 2 1; do
    ovs-ofctl add-flow br0 hard_timeout=$((10 + in_port * 3)),in_port=$in_port,actions=drop
done
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 hard_timeout=13, in_port=1 actions=drop
 hard_timeout=16, in_port=2 actions=drop
 hard_timeout=19, in_port=3 actions=drop
 hard_timeout=22, in_port=4 actions=drop
NXST_FLOW reply:
])
# Sleep and modify the one that expires soonest
ovs-appctl time/warp 5000
AT_CHECK([ovs-ofctl mod-flows br0 in_port=1,actions=drop])
# At this point the table would looks like:
#  in_port   seconds to expire
#     1            13
#     2            11
#     3            14
#     4            17
ovs-appctl time/warp 2000
# Adding another flow will cause the one that expires soonest to be evicted.
AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 hard_timeout=13, in_port=1 actions=drop
 hard_timeout=19, in_port=3 actions=drop
 hard_timeout=22, in_port=4 actions=drop
 in_port=5 actions=drop
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - eviction upon table overflow, with modified idle timeout])
OVS_VSWITCHD_START([add-port br0 p1 -- set interface p1 type=dummy ofport_request=1])
# Configure a maximum of 4 flows.
AT_CHECK(
  [ovs-vsctl \
     -- --id=@t0 create Flow_Table flow-limit=4 overflow-policy=evict \
     -- set bridge br0 flow_tables:0=@t0 \
   | ${PERL} $srcdir/uuidfilt.pl],
  [0], [<0>
])
# Add 4 flows.
for in_port in 4 3 2 1; do
    ovs-ofctl add-flow br0 idle_timeout=$((10 + in_port * 3)),in_port=$in_port,actions=drop
done
ovs-appctl time/stop
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=13, in_port=1 actions=drop
 idle_timeout=16, in_port=2 actions=drop
 idle_timeout=19, in_port=3 actions=drop
 idle_timeout=22, in_port=4 actions=drop
NXST_FLOW reply:
])
# Sleep and receive on the flow that expires soonest
ovs-appctl time/warp 5000
AT_CHECK([ovs-appctl netdev-dummy/receive p1 'in_port(1)'])
# At this point the table would looks like:
#  in_port   seconds to expire
#     1            13
#     2            11
#     3            14
#     4            17
ovs-appctl time/warp 2000
# Adding another flow will cause the one that expires soonest to be evicted.
AT_CHECK([ovs-ofctl add-flow br0 in_port=5,actions=drop])
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=19, in_port=3 actions=drop
 idle_timeout=22, in_port=4 actions=drop
 in_port=5 actions=drop
 n_packets=1, n_bytes=60, idle_timeout=13, in_port=1 actions=drop
NXST_FLOW reply:
])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.0)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -P standard monitor br0 --detach --no-chdir --pidfile])
check_async () {
    printf '\n\n--- check_async %d ---\n\n\n' $1
    shift

    ovs-appctl -t ovs-ofctl ofctl/barrier
    ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
    : > expout

    # OFPT_PACKET_IN, OFPR_ACTION (controller_id=0)
    ovs-ofctl -v packet-out br0 controller controller '0001020304050010203040501234'
    if test X"$1" = X"OFPR_ACTION"; then shift;
        echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
    fi

    # OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
    ovs-ofctl -v packet-out br0 controller 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
    if test X"$1" = X"OFPR_NO_MATCH"; then shift;
        echo >>expout "OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via no_match) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
    fi

    # OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
    ovs-ofctl packet-out br0 controller dec_ttl '002583dfb4000026b98cb0f908004500003eb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
    if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
        echo >>expout "OFPT_PACKET_IN: total_len=76 in_port=CONTROLLER (via invalid_ttl) data_len=76 (unbuffered)
udp,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
    fi

    # OFPT_PORT_STATUS, OFPPR_ADD
    ovs-vsctl add-port br0 test -- set Interface test type=dummy ofport_request=1
    if test X"$1" = X"OFPPR_ADD"; then shift;
        echo >>expout "OFPT_PORT_STATUS: ADD: 1(test): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max"
    fi

    # OFPT_PORT_STATUS, OFPPR_DELETE
    ovs-vsctl del-port br0 test
    if test X"$1" = X"OFPPR_DELETE"; then shift;
        echo >>expout "OFPT_PORT_STATUS: DEL: 1(test): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max"
    fi

    # OFPT_FLOW_REMOVED, OFPRR_DELETE
    ovs-ofctl add-flow br0 send_flow_rem,actions=drop
    ovs-ofctl --strict del-flows br0 ''
    if test X"$1" = X"OFPRR_DELETE"; then shift;
        echo >>expout "OFPT_FLOW_REMOVED:  reason=delete"
    fi
    AT_FAIL_IF([test X"$1" != X])

    ovs-appctl -t ovs-ofctl ofctl/barrier
    echo >>expout "OFPT_BARRIER_REPLY:"

    AT_CHECK(
      [[sed '
s/ (xid=0x[0-9a-fA-F]*)//
s/ *duration.*//
s/00:0.$/00:0x/' < monitor.log]],
      [0], [expout])
}

# It's a service connection so initially there should be no async messages.
check_async 1

# Set miss_send_len to 128, turning on packet-ins for our service connection.
ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
check_async 2 OFPR_ACTION OFPPR_ADD OFPPR_DELETE OFPRR_DELETE

# Set miss_send_len to 128 and enable invalid_ttl.
ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700040080
check_async 3 OFPR_ACTION OFPR_INVALID_TTL OFPPR_ADD OFPPR_DELETE OFPRR_DELETE

# Become slave, which should disable everything except port status.
ovs-appctl -t ovs-ofctl ofctl/send 0104001400000002000023200000000a00000002
check_async 4 OFPPR_ADD OFPPR_DELETE

# Use NXT_SET_ASYNC_CONFIG to enable a patchwork of asynchronous messages.
ovs-appctl -t ovs-ofctl ofctl/send 01040028000000020000232000000013000000020000000500000005000000020000000200000005
check_async 5 OFPR_INVALID_TTL OFPPR_DELETE OFPRR_DELETE

# Set controller ID 123.
ovs-appctl -t ovs-ofctl ofctl/send 01040018000000030000232000000014000000000000007b
check_async 6 OFPR_NO_MATCH OFPPR_DELETE OFPRR_DELETE

# Restore controller ID 0.
ovs-appctl -t ovs-ofctl ofctl/send 010400180000000300002320000000140000000000000000

# Become master.
ovs-appctl -t ovs-ofctl ofctl/send 0104001400000002000023200000000a00000001
check_async 7 OFPR_ACTION OFPPR_ADD

OVS_APP_EXIT_AND_WAIT([ovs-ofctl])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.2)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow12 -P standard monitor br0 --detach --no-chdir --pidfile])
check_async () {
    printf '\n\n--- check_async %d ---\n\n\n' $1
    INDEX=$1
    shift

    ovs-appctl -t ovs-ofctl ofctl/barrier
    ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
    : > expout

    # OFPT_PACKET_IN, OFPR_ACTION (controller_id=0)
    ovs-ofctl -O OpenFlow12 -v packet-out br0 none controller '0001020304050010203040501234'
    if test X"$1" = X"OFPR_ACTION"; then shift;
        echo >>expout "OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
    fi

    # OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
    ovs-ofctl -O OpenFlow12 -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
    if test X"$1" = X"OFPR_NO_MATCH"; then shift;
        echo >>expout "OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY (via no_match) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
    fi

    # OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
    ovs-ofctl -O OpenFlow12 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003eb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
    if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
        echo >>expout "OFPT_PACKET_IN (OF1.2): total_len=76 in_port=ANY (via invalid_ttl) data_len=76 (unbuffered)
udp,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
    fi

    # OFPT_PORT_STATUS, OFPPR_ADD
    ovs-vsctl add-port br0 test -- set Interface test type=dummy
    if test X"$1" = X"OFPPR_ADD"; then shift;
        echo >>expout "OFPT_PORT_STATUS (OF1.2): ADD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max"
    fi

    # OFPT_PORT_STATUS, OFPPR_DELETE
    ovs-vsctl del-port br0 test
    if test X"$1" = X"OFPPR_DELETE"; then shift;
        echo >>expout "OFPT_PORT_STATUS (OF1.2): DEL: ${INDEX}(test): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max"
    fi

    # OFPT_FLOW_REMOVED, OFPRR_DELETE
    ovs-ofctl -O OpenFlow12 add-flow br0 send_flow_rem,actions=drop
    ovs-ofctl -O OpenFlow12 --strict del-flows br0 ''
    if test X"$1" = X"OFPRR_DELETE"; then shift;
        echo >>expout "OFPT_FLOW_REMOVED (OF1.2):  reason=delete table_id=0"
    fi
    AT_FAIL_IF([test X"$1" != X])

    sleep 1

    AT_CHECK(
      [[sed '
s/ (xid=0x[0-9a-fA-F]*)//
s/ *duration.*//
s/00:0.$/00:0x/' < monitor.log]],
      [0], [expout])
}

# It's a service connection so initially there should be no async messages.
check_async 1

# Set miss_send_len to 128, turning on packet-ins for our service connection.
ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700000080
check_async 2 OFPR_ACTION OFPPR_ADD OFPPR_DELETE OFPRR_DELETE

# Set miss_send_len to 128 and enable invalid_ttl.
ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700040080
check_async 3 OFPR_ACTION OFPR_INVALID_TTL OFPPR_ADD OFPPR_DELETE OFPRR_DELETE

# Become slave (OF 1.2), which should disable everything except port status.
ovs-appctl -t ovs-ofctl ofctl/send 031800180000000200000003000000000000000000000001
check_async 4 OFPPR_ADD OFPPR_DELETE

# Use NXT_SET_ASYNC_CONFIG to enable a patchwork of asynchronous messages.
ovs-appctl -t ovs-ofctl ofctl/send 03040028000000020000232000000013000000020000000500000005000000020000000200000005
check_async 5 OFPR_INVALID_TTL OFPPR_DELETE OFPRR_DELETE

# Set controller ID 123.
ovs-appctl -t ovs-ofctl ofctl/send 03040018000000030000232000000014000000000000007b
check_async 6 OFPR_NO_MATCH OFPPR_DELETE OFPRR_DELETE

# Restore controller ID 0.
ovs-appctl -t ovs-ofctl ofctl/send 030400180000000300002320000000140000000000000000

# Become master (OF 1.2).
ovs-appctl -t ovs-ofctl ofctl/send 031800180000000400000002000000000000000000000002
check_async 7 OFPR_ACTION OFPPR_ADD

OVS_APP_EXIT_AND_WAIT([ovs-ofctl])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.3)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow13 -P standard monitor br0 --detach --no-chdir --pidfile])
check_async () {
    printf '\n\n--- check_async %d ---\n\n\n' $1
    INDEX=$1
    shift

    ovs-appctl -t ovs-ofctl ofctl/barrier
    ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
    : > expout

    # OFPT_PACKET_IN, OFPR_ACTION (controller_id=0)
    ovs-ofctl -O OpenFlow13 -v packet-out br0 none controller '0001020304050010203040501234'
    if test X"$1" = X"OFPR_ACTION"; then shift;
        echo >>expout "OFPT_PACKET_IN (OF1.3): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
    fi

    # OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
    ovs-ofctl -O OpenFlow13 -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
    if test X"$1" = X"OFPR_NO_MATCH"; then shift;
        echo >>expout "OFPT_PACKET_IN (OF1.3): total_len=14 in_port=ANY (via no_match) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
    fi

    # OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
    ovs-ofctl -O OpenFlow13 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003eb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
    if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
        echo >>expout "OFPT_PACKET_IN (OF1.3): total_len=76 in_port=ANY (via invalid_ttl) data_len=76 (unbuffered)
udp,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
    fi

    # OFPT_PORT_STATUS, OFPPR_ADD
    ovs-vsctl add-port br0 test -- set Interface test type=dummy
    if test X"$1" = X"OFPPR_ADD"; then shift;
        echo >>expout "OFPT_PORT_STATUS (OF1.3): ADD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max"
    fi

    # OFPT_PORT_STATUS, OFPPR_DELETE
    ovs-vsctl del-port br0 test
    if test X"$1" = X"OFPPR_DELETE"; then shift;
        echo >>expout "OFPT_PORT_STATUS (OF1.3): DEL: ${INDEX}(test): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max"
    fi

    # OFPT_FLOW_REMOVED, OFPRR_DELETE
    ovs-ofctl -O OpenFlow13 add-flow br0 send_flow_rem,actions=drop
    ovs-ofctl -O OpenFlow13 --strict del-flows br0 ''
    if test X"$1" = X"OFPRR_DELETE"; then shift;
        echo >>expout "OFPT_FLOW_REMOVED (OF1.3):  reason=delete table_id=0"
    fi

    # OFPT_FLOW_REMOVED, OFPRR_GROUP_DELETE
    ovs-ofctl -O OpenFlow13 add-group br0 group_id=1234,type=all,bucket=output:10
    ovs-ofctl -O OpenFlow13 add-flow br0 send_flow_rem,actions=group:1234
    ovs-ofctl -O OpenFlow13 --strict del-groups br0 group_id=1234
    if test X"$1" = X"OFPRR_DELETE"; then shift;
        echo >>expout "OFPT_FLOW_REMOVED (OF1.3):  reason=gropu_delete table_id=0"
    fi

    AT_FAIL_IF([test X"$1" != X])

    ovs-appctl -t ovs-ofctl ofctl/barrier
    echo >>expout "OFPT_BARRIER_REPLY (OF1.3):"

    AT_CHECK(
      [[sed '
s/ (xid=0x[0-9a-fA-F]*)//
s/ *duration.*//
s/00:0.$/00:0x/' < monitor.log]],
      [0], [expout])
}

# It's a service connection so initially there should be no async messages.
check_async 1

# Set miss_send_len to 128, turning on packet-ins for our service connection.
ovs-appctl -t ovs-ofctl ofctl/send 0409000c0123456700000080
check_async 2 OFPR_ACTION OFPPR_ADD OFPPR_DELETE OFPRR_DELETE

# Become slave (OF 1.3), which should disable everything except port status.
ovs-appctl -t ovs-ofctl ofctl/send 041800180000000200000003000000000000000000000001
check_async 3 OFPPR_ADD OFPPR_DELETE

# Use OF 1.3 OFPT_SET_ASYNC to enable a patchwork of asynchronous messages.
ovs-appctl -t ovs-ofctl ofctl/send 041c002000000002000000020000000500000005000000020000000200000005
check_async 4 OFPR_INVALID_TTL OFPPR_DELETE OFPRR_DELETE

# Set controller ID 123.
ovs-appctl -t ovs-ofctl ofctl/send 04040018000000030000232000000014000000000000007b
check_async 5 OFPR_NO_MATCH OFPPR_DELETE OFPRR_DELETE

# Restore controller ID 0.
ovs-appctl -t ovs-ofctl ofctl/send 040400180000000300002320000000140000000000000000

# Become master (OF 1.3).
ovs-appctl -t ovs-ofctl ofctl/send 041800180000000400000002000000000000000000000002
check_async 6 OFPR_ACTION OFPPR_ADD

OVS_APP_EXIT_AND_WAIT([ovs-ofctl])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.4)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow14 -P standard monitor br0 --detach --no-chdir --pidfile])
check_async () {
    printf '\n\n--- check_async %d ---\n\n\n' $1
    INDEX=$1
    shift

    ovs-appctl -t ovs-ofctl ofctl/barrier
    ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
    : > expout

    # OFPT_PACKET_IN, OFPR_ACTION (controller_id=0)
    ovs-ofctl -O OpenFlow14 -v packet-out br0 none controller '0001020304050010203040501234'
    if test X"$1" = X"OFPR_ACTION"; then shift;
        echo >>expout "OFPT_PACKET_IN (OF1.4): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
    fi

    # OFPT_PACKET_IN, OFPR_NO_MATCH (controller_id=123)
    ovs-ofctl -O OpenFlow14 -v packet-out br0 none 'controller(reason=no_match,id=123)' '0001020304050010203040501234'
    if test X"$1" = X"OFPR_NO_MATCH"; then shift;
        echo >>expout "OFPT_PACKET_IN (OF1.4): total_len=14 in_port=ANY (via no_match) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234"
    fi

    # OFPT_PACKET_IN, OFPR_INVALID_TTL (controller_id=0)
    ovs-ofctl -O OpenFlow14 packet-out br0 none dec_ttl '002583dfb4000026b98cb0f908004500003eb7e200000011339bac11370dac100002d7730035002b8f6d86fb0100000100000000000006626c702d7873066e696369726103636f6d00000f00'
    if test X"$1" = X"OFPR_INVALID_TTL"; then shift;
        echo >>expout "OFPT_PACKET_IN (OF1.4): total_len=76 in_port=ANY (via invalid_ttl) data_len=76 (unbuffered)
udp,vlan_tci=0x0000,dl_src=00:26:b9:8c:b0:f9,dl_dst=00:25:83:df:b4:00,nw_src=172.17.55.13,nw_dst=172.16.0.2,nw_tos=0,nw_ecn=0,nw_ttl=0,tp_src=55155,tp_dst=53 udp_csum:8f6d"
    fi

# OFPT_PORT_STATUS, OFPPR_ADD
    ovs-vsctl add-port br0 test -- set Interface test type=dummy
    if test X"$1" = X"OFPPR_ADD"; then shift;
        echo >>expout "OFPT_PORT_STATUS (OF1.4): ADD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max"
    fi

    # OFPT_PORT_STATUS, OFPPR_MODIFY
    ovs-ofctl -O OpenFlow14 -vwarn mod-port br0 test up
    if test X"$1" = X"OFPPR_MODIFY"; then shift;
        echo >>expout "OFPT_PORT_STATUS (OF1.4): MOD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
     config:     0
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
OFPT_PORT_STATUS (OF1.4): MOD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
     config:     0
     state:      0
     speed: 0 Mbps now, 0 Mbps max"
    fi

    # OFPT_PORT_STATUS, OFPPR_DELETE
    ovs-vsctl del-port br0 test
    if test X"$1" = X"OFPPR_DELETE"; then shift;
        echo >>expout "OFPT_PORT_STATUS (OF1.4): DEL: ${INDEX}(test): addr:aa:55:aa:55:00:0x
     config:     0
     state:      0
     speed: 0 Mbps now, 0 Mbps max"
    fi

    # OFPT_FLOW_REMOVED, OFPRR_DELETE
    ovs-ofctl -O OpenFlow14 add-flow br0 send_flow_rem,actions=drop
    ovs-ofctl -O OpenFlow14 --strict del-flows br0 ''
    if test X"$1" = X"OFPRR_DELETE"; then shift;
        echo >>expout "OFPT_FLOW_REMOVED (OF1.4):  reason=delete table_id=0"
    fi

    # OFPT_FLOW_REMOVED, OFPRR_GROUP_DELETE
    ovs-ofctl -O OpenFlow14 add-group br0 group_id=1234,type=all,bucket=output:10
    ovs-ofctl -O OpenFlow14 add-flow br0 send_flow_rem,actions=group:1234
    ovs-ofctl -O OpenFlow14 --strict del-groups br0 group_id=1234
    if test X"$1" = X"OFPRR_GROUP_DELETE"; then shift;
        echo >>expout "OFPT_FLOW_REMOVED (OF1.4):  reason=group_delete table_id=0"
    fi

    # OFPT_TABLE_STATUS, OFPTR_VACANCY_UP
    if test X"$1" = X"OFPTR_VACANCY_UP"; then shift;
        ovs-vsctl -- --id=@t1 create Flow_Table flow-limit=10 -- set bridge br0 flow_tables:1=@t1

	# Turn on vacancy events, then add flows until we're full.
	# With initial vacancy of 100% and vacancy_up of 80%, so that
	# vacancy >= vacancy_up, this enables VACANY_DOWN events, so
	# we get a single such message when vacancy dips below 20%.
        ovs-ofctl -O OpenFlow14 mod-table br0 1 vacancy:20,80
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=1,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=2,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=3,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=4,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=5,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=6,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=7,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=8,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=9,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=10,actions=2
        echo >>expout "OFPT_TABLE_STATUS (OF1.4): reason=VACANCY_DOWN
table_desc:-
  table 1:
   eviction=off eviction_flags=OTHER|IMPORTANCE|LIFETIME
   vacancy=on vacancy_down=20% vacancy_up=80% vacancy=10%"
        # Then delete flows until we're empty.  Sending the
	# VACANCY_DOWN message enabled VACANCY_UP events, so we get a
	# single such message when vacancy rises above 80%.
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=1
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=2
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=3
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=4
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=5
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=6
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=7
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=8
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=9
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=10
        echo >>expout "OFPT_TABLE_STATUS (OF1.4): reason=VACANCY_UP
table_desc:-
  table 1:
   eviction=off eviction_flags=OTHER|IMPORTANCE|LIFETIME
   vacancy=on vacancy_down=20% vacancy_up=80% vacancy=90%"

        # Now approach vacancy from the other direction.  First
	# disable vacancy events.  With initial vacancy of 70%, so
	# that vacancy < vacancy_up, this enables VACANCY_UP events.
	# That means that filling up the table generates no message,
	# but deleting all the flows generates VACANCY_UP at the point
	# vacancy rises above 80%.
        ovs-ofctl -O OpenFlow14 mod-table br0 1 novacancy
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=1,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=2,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=3,actions=2
        ovs-ofctl -O OpenFlow14 mod-table br0 1 vacancy:20,80
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=4,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=5,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=6,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=7,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=8,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=9,actions=2
        ovs-ofctl -O OpenFlow14 add-flow br0 table=1,in_port=10,actions=2
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=1
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=2
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=3
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=4
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=5
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=6
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=7
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=8
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=9
        ovs-ofctl -O OpenFlow14 del-flows br0 table=1,in_port=10
        echo >>expout "OFPT_TABLE_STATUS (OF1.4): reason=VACANCY_UP
table_desc:-
  table 1:
   eviction=off eviction_flags=OTHER|IMPORTANCE|LIFETIME
   vacancy=on vacancy_down=20% vacancy_up=80% vacancy=90%"
    fi

    AT_FAIL_IF([test X"$1" != X])

    ovs-appctl -t ovs-ofctl ofctl/barrier
    echo >>expout "OFPT_BARRIER_REPLY (OF1.4):"

    AT_CHECK(
      [[sed '
s/ (xid=0x[0-9a-fA-F]*)//
s/ *duration.*//
s/00:0.$/00:0x/' < monitor.log]],
      [0], [expout])
}

# It's a service connection so initially there should be no async messages.
check_async 1

# Set miss_send_len to 128, turning on packet-ins for our service connection.
ovs-appctl -t ovs-ofctl ofctl/send 0509000c0123456700000080
check_async 2 OFPR_ACTION OFPPR_ADD OFPPR_MODIFY OFPPR_DELETE OFPRR_DELETE OFPRR_GROUP_DELETE

# Become slave (OF 1.4), which should disable everything except port status.
ovs-appctl -t ovs-ofctl ofctl/send 051800180000000200000003000000000000000000000001
check_async 3 OFPPR_ADD OFPPR_MODIFY OFPPR_DELETE

# Use OF 1.4 OFPT_SET_ASYNC to enable a patchwork of asynchronous messages.
ovs-appctl -t ovs-ofctl ofctl/send 051c0040000000020000000800000005000100080000000200020008000000020003000800000005000400080000001c00050008000000050008000800000018
check_async 4 OFPR_INVALID_TTL OFPPR_DELETE OFPRR_DELETE OFPRR_GROUP_DELETE OFPTR_VACANCY_UP

# Set controller ID 123.
ovs-appctl -t ovs-ofctl ofctl/send 05040018000000030000232000000014000000000000007b
check_async 5 OFPR_NO_MATCH OFPPR_DELETE OFPRR_DELETE OFPRR_GROUP_DELETE

# Restore controller ID 0.
ovs-appctl -t ovs-ofctl ofctl/send 050400180000000300002320000000140000000000000000

# Become master (OF 1.4).
ovs-appctl -t ovs-ofctl ofctl/send 051800180000000400000002000000000000000000000002
check_async 6 OFPR_ACTION OFPPR_ADD OFPPR_MODIFY OFPRR_DELETE

OVS_APP_EXIT_AND_WAIT([ovs-ofctl])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - asynchronous message control (OpenFlow 1.5)])
OVS_VSWITCHD_START
AT_CHECK([ovs-ofctl -O OpenFlow15 -P standard monitor br0 --detach --no-chdir --pidfile])
check_async () {
    printf '\n\n--- check_async %d ---\n\n\n' $1
    INDEX=$1
    shift

    ovs-appctl -t ovs-ofctl ofctl/barrier
    ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
    : > expout

    # Other tests are not working with OF 1.5, and message
    # format may change, so leave them out.

    # OFPT_PORT_STATUS, OFPPR_ADD
    ovs-vsctl add-port br0 test -- set Interface test type=dummy
    if test X"$1" = X"OFPPR_ADD"; then shift;
        echo >>expout "OFPT_PORT_STATUS (OF1.5): ADD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
     config:     PORT_DOWN
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max"
    fi

    # OFPT_PORT_STATUS, OFPPR_MODIFY
    ovs-ofctl -O OpenFlow15 -vwarn mod-port br0 test up
    if test X"$1" = X"OFPPR_MODIFY"; then shift;
        echo >>expout "OFPT_PORT_STATUS (OF1.5): MOD: ${INDEX}(test): addr:aa:55:aa:55:00:0x
     config:     0
     state:      LINK_DOWN
     speed: 0 Mbps now, 0 Mbps max
OFPT_PORT_STATUS (OF1.5): MOD: 2(test): addr:aa:55:aa:55:00:0x
     config:     0
     state:      0
     speed: 0 Mbps now, 0 Mbps max"
    fi

    # OFPT_PORT_STATUS, OFPPR_DELETE
    ovs-vsctl del-port br0 test
    if test X"$1" = X"OFPPR_DELETE"; then shift;
        echo >>expout "OFPT_PORT_STATUS (OF1.5): DEL: ${INDEX}(test): addr:aa:55:aa:55:00:0x
     config:     0
     state:      0
     speed: 0 Mbps now, 0 Mbps max"
    fi

    AT_FAIL_IF([test X"$1" != X])

    ovs-appctl -t ovs-ofctl ofctl/barrier
    echo >>expout "OFPT_BARRIER_REPLY (OF1.5):"

    AT_CHECK(
      [[sed '
s/ (xid=0x[0-9a-fA-F]*)//
s/ *duration.*//
s/00:0.$/00:0x/' < monitor.log]],
      [0], [expout])
}

# It's a service connection so initially there should be no async messages.
check_async 1

# If we don't set this, async messages are not received.
# Set miss_send_len to 128, turning on packet-ins for our service connection.
ovs-appctl -t ovs-ofctl ofctl/send 0609000c0123456700000080
check_async 2 OFPPR_ADD OFPPR_MODIFY OFPPR_DELETE

# Set-async has changed in OF 1.4 and is not yet implemented.

OVS_APP_EXIT_AND_WAIT([ovs-ofctl])
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This test checks that the role request/response messaging works
dnl and that generation_id is handled properly.
AT_SETUP([ofproto - controller role (OpenFlow 1.2)])
OVS_VSWITCHD_START
on_exit 'kill `cat c1.pid c2.pid`'

# Start two ovs-ofctl controller processes.
AT_CAPTURE_FILE([monitor1.log])
AT_CAPTURE_FILE([expout1])
AT_CAPTURE_FILE([experr1])
AT_CAPTURE_FILE([monitor2.log])
AT_CAPTURE_FILE([expout2])
AT_CAPTURE_FILE([experr2])
for i in 1 2; do
     AT_CHECK([ovs-ofctl -O OpenFlow12 monitor br0 --detach --no-chdir --pidfile=`pwd`/c$i.pid --unixctl=`pwd`/c$i])
    ovs-appctl -t `pwd`/c$i ofctl/barrier
    ovs-appctl -t `pwd`/c$i ofctl/set-output-file monitor$i.log
    : > expout$i
    : > experr$i

    # find out current role
    ovs-appctl -t `pwd`/c$i ofctl/send 031800180000000200000000000000000000000000000000
    echo >>experr$i "send: OFPT_ROLE_REQUEST (OF1.2): role=nochange"
    echo >>expout$i "OFPT_ROLE_REPLY (OF1.2): role=equal"
done

# controller 1: Become slave (generation_id is initially undefined, so
# 2^63+2 should not be stale)
ovs-appctl -t `pwd`/c1 ofctl/send 031800180000000300000003000000008000000000000002
echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.2): role=slave generation_id=9223372036854775810"
echo >>expout1 "OFPT_ROLE_REPLY (OF1.2): role=slave generation_id=9223372036854775810"

# controller 2: Become master.
ovs-appctl -t `pwd`/c2 ofctl/send 031800180000000300000002000000008000000000000003
echo >>experr2 "send: OFPT_ROLE_REQUEST (OF1.2): role=master generation_id=9223372036854775811"
echo >>expout2 "OFPT_ROLE_REPLY (OF1.2): role=master generation_id=9223372036854775811"

# controller 1: Try to become the master using a stale generation ID
ovs-appctl -t `pwd`/c1 ofctl/send 031800180000000400000002000000000000000000000003
echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.2): role=master generation_id=3"
echo >>expout1 "OFPT_ERROR (OF1.2): OFPRRFC_STALE"
echo >>expout1 "OFPT_ROLE_REQUEST (OF1.2): role=master generation_id=3"

# controller 1: Become master using a valid generation ID
ovs-appctl -t `pwd`/c1 ofctl/send 031800180000000500000002000000000000000000000001
echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.2): role=master generation_id=1"
echo >>expout1 "OFPT_ROLE_REPLY (OF1.2): role=master generation_id=1"

for i in 1 2; do
    ovs-appctl -t `pwd`/c$i ofctl/barrier
    echo >>expout$i "OFPT_BARRIER_REPLY (OF1.2):"
done

# Check output.
for i in 1 2; do
    cp expout$i expout
    AT_CHECK([grep -v '^send:' monitor$i.log | strip_xids], [0], [expout])
    cp experr$i expout
    AT_CHECK([grep '^send:' monitor$i.log | strip_xids], [0], [expout])
done
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This test checks that the role request/response messaging works,
dnl that generation_id is handled properly, and that role status update
dnl messages are sent when a controller's role gets changed from master
dnl to slave.
AT_SETUP([ofproto - controller role (OpenFlow 1.4)])
OVS_VSWITCHD_START
on_exit 'kill `cat c1.pid c2.pid`'

# Start two ovs-ofctl controller processes.
AT_CAPTURE_FILE([monitor1.log])
AT_CAPTURE_FILE([expout1])
AT_CAPTURE_FILE([experr1])
AT_CAPTURE_FILE([monitor2.log])
AT_CAPTURE_FILE([expout2])
AT_CAPTURE_FILE([experr2])
for i in 1 2; do
     AT_CHECK([ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile=`pwd`/c$i.pid --unixctl=`pwd`/c$i])
    ovs-appctl -t `pwd`/c$i ofctl/barrier
    ovs-appctl -t `pwd`/c$i ofctl/set-output-file monitor$i.log
    : > expout$i
    : > experr$i

    # find out current role
    ovs-appctl -t `pwd`/c$i ofctl/send 051800180000000200000000000000000000000000000000
    echo >>experr$i "send: OFPT_ROLE_REQUEST (OF1.4): role=nochange"
    echo >>expout$i "OFPT_ROLE_REPLY (OF1.4): role=equal"
done

# controller 1: Become slave (generation_id is initially undefined, so
# 2^63+2 should not be stale)
ovs-appctl -t `pwd`/c1 ofctl/send 051800180000000300000003000000008000000000000002
echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.4): role=slave generation_id=9223372036854775810"
echo >>expout1 "OFPT_ROLE_REPLY (OF1.4): role=slave generation_id=9223372036854775810"

# controller 2: Become master.
ovs-appctl -t `pwd`/c2 ofctl/send 051800180000000300000002000000008000000000000003
echo >>experr2 "send: OFPT_ROLE_REQUEST (OF1.4): role=master generation_id=9223372036854775811"
echo >>expout2 "OFPT_ROLE_REPLY (OF1.4): role=master generation_id=9223372036854775811"

# controller 1: Try to become the master using a stale generation ID
ovs-appctl -t `pwd`/c1 ofctl/send 051800180000000400000002000000000000000000000003
echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.4): role=master generation_id=3"
echo >>expout1 "OFPT_ERROR (OF1.4): OFPRRFC_STALE"
echo >>expout1 "OFPT_ROLE_REQUEST (OF1.4): role=master generation_id=3"

# controller 1: Become master using a valid generation ID
ovs-appctl -t `pwd`/c1 ofctl/send 051800180000000500000002000000000000000000000001
echo >>experr1 "send: OFPT_ROLE_REQUEST (OF1.4): role=master generation_id=1"
echo >>expout1 "OFPT_ROLE_REPLY (OF1.4): role=master generation_id=1"
echo >>expout2 "OFPT_ROLE_STATUS (OF1.4): role=slave generation_id=1 reason=master_request"

for i in 1 2; do
    ovs-appctl -t `pwd`/c$i ofctl/barrier
    echo >>expout$i "OFPT_BARRIER_REPLY (OF1.4):"
done

# Check output.
for i in 1 2; do
    cp expout$i expout
    AT_CHECK([grep -v '^send:' monitor$i.log | strip_xids], [0], [expout])
    cp experr$i expout
    AT_CHECK([grep '^send:' monitor$i.log | strip_xids], [0], [expout])
done
OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This test checks the Group and meter notifications when a group mod
dnl command is sent from one controller and the reply is received by
dnl other controllers.
AT_SETUP([ofproto - requestforward (OpenFlow 1.4)])
OVS_VSWITCHD_START
on_exit 'kill `cat c1.pid c2.pid c3.pid`'

# Start two ovs-ofctl controller processes.
AT_CAPTURE_FILE([monitor1.log])
AT_CAPTURE_FILE([expout1])
AT_CAPTURE_FILE([monitor2.log])
AT_CAPTURE_FILE([expout2])
AT_CAPTURE_FILE([monitor3.log])
AT_CAPTURE_FILE([expout3])

ovs-ofctl -O OpenFlow15 monitor br0 --detach --no-chdir --pidfile=`pwd`/c1.pid --unixctl=`pwd`/c1
ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile=`pwd`/c2.pid --unixctl=`pwd`/c2
ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile=`pwd`/c3.pid --unixctl=`pwd`/c3

check_async () {
    for i in 1 3; do
        ovs-appctl -t `pwd`/c$i ofctl/barrier
        ovs-appctl -t `pwd`/c$i ofctl/set-output-file monitor$i.log
        : > expout$i
    done

    printf '\n\n--- check_async %d ---\n\n\n' $1
    INDEX=$1
    shift

    # OFPGC_ADD
    ovs-appctl -t `pwd`/c2 ofctl/send "050f0020000000020000000000000001 00100000 ffffffffffffffff 00000000"
    if test X"$1" = X"OFPGC_ADD"; then shift;
        echo >>expout2 "send: OFPT_GROUP_MOD (OF1.4):
 ADD group_id=1,type=all,bucket=actions=drop"
        echo >>expout1 "OFPT_REQUESTFORWARD (OF1.5): reason=group_mod
 ADD group_id=1,type=all,bucket=bucket_id:0,actions=drop"
        echo >>expout3 "OFPT_REQUESTFORWARD (OF1.4): reason=group_mod
 ADD group_id=1,type=all,bucket=actions=drop"
    fi

    # OFPGC_MODIFY
    ovs-appctl -t `pwd`/c2 ofctl/send "050f0020000000020001010000000001 00100000 ffffffffffffffff 00000000"
    if test X"$1" = X"OFPGC_MODIFY"; then shift;
        echo >>expout2 "send: OFPT_GROUP_MOD (OF1.4):
 MOD group_id=1,type=select,bucket=weight:0,actions=drop"
        echo >>expout1 "OFPT_REQUESTFORWARD (OF1.5): reason=group_mod
 MOD group_id=1,type=select,bucket=bucket_id:0,weight:0,actions=drop"
        echo >>expout3 "OFPT_REQUESTFORWARD (OF1.4): reason=group_mod
 MOD group_id=1,type=select,bucket=weight:0,actions=drop"
    fi

    ovs-appctl -t `pwd`/c1 ofctl/barrier
    echo >>expout1 "OFPT_BARRIER_REPLY (OF1.5):"
    ovs-appctl -t `pwd`/c2 ofctl/barrier
    echo >>expout2 "OFPT_BARRIER_REPLY (OF1.4):"
    ovs-appctl -t `pwd`/c3 ofctl/barrier
    echo >>expout3 "OFPT_BARRIER_REPLY (OF1.4):"

    # Check output.
    for i in 1 3; do
        cp expout$i expout
        AT_CHECK(
      [[sed '
s/ (xid=0x[0-9a-fA-F]*)//'< monitor$i.log]],
      [0], [expout])
    done
}

# controller 1: Become slave
ovs-appctl -t `pwd`/c1 ofctl/send 061800180000000300000003000000008000000000000002

# controller 2: Become master
ovs-appctl -t `pwd`/c2 ofctl/send 051800180000000300000002000000008000000000000003

# controller 1: Become slave
ovs-appctl -t `pwd`/c3 ofctl/send 051800180000000300000003000000008000000000000004

# controller 1: Enabled requestforward using set Asynchronous message
ovs-appctl -t `pwd`/c1 ofctl/send 061c00280000000200000008000000050002000800000002000400080000001a000a000800000003

# controller 2: Enabled requestforward using set Asynchronous message
ovs-appctl -t `pwd`/c2 ofctl/send 051c002800000002000100080000000200030008000000050005000800000005000b000800000003

# controller 1: Enabled requestforward using set Asynchronous message
ovs-appctl -t `pwd`/c3 ofctl/send 051c00280000000200000008000000050002000800000002000400080000001a000a000800000003
check_async 1 OFPGC_ADD OFPGC_MODIFY

OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This test checks that OFPT_PACKET_OUT accepts both OFPP_NONE (as
dnl specified by OpenFlow 1.0) and OFPP_CONTROLLER (used by some
dnl controllers despite the spec) as meaning a packet that was generated
dnl by the controller.
AT_SETUP([ofproto - packet-out from controller (OpenFlow 1.0)])
OVS_VSWITCHD_START
add_of_ports br0 1

# Start a monitor listening for packet-ins.
AT_CHECK([ovs-ofctl -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CAPTURE_FILE([monitor.log])

# Send some packet-outs with OFPP_NONE and OFPP_CONTROLLER (65533) as in_port.
AT_CHECK([ovs-ofctl packet-out br0 none controller,1 '0001020304050010203040501234'])
AT_CHECK([ovs-ofctl packet-out br0 controller controller,1 '0001020304050010203040505678'])

# Stop the monitor and check its output.
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

ovs-ofctl dump-ports br0

AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN: total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_PACKET_IN: total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
OFPT_BARRIER_REPLY:
])

OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This test checks that OFPT_PACKET_OUT accepts both OFPP_NONE (as
dnl specified by OpenFlow 1.2) and OFPP_CONTROLLER (used by some
dnl controllers despite the spec) as meaning a packet that was generated
dnl by the controller.
AT_SETUP([ofproto - packet-out from controller (OpenFlow 1.2)])
OVS_VSWITCHD_START

# Start a monitor listening for packet-ins.
AT_CHECK([ovs-ofctl -O OpenFlow12 -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CAPTURE_FILE([monitor.log])

# Send some packet-outs with OFPP_NONE and OFPP_CONTROLLER (65533) as in_port.
AT_CHECK([ovs-ofctl -O OpenFlow12 packet-out br0 none controller '0001020304050010203040501234'])
AT_CHECK([ovs-ofctl -O OpenFlow12 packet-out br0 4294967293 controller '0001020304050010203040505678'])

# Stop the monitor and check its output.
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN (OF1.2): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_PACKET_IN (OF1.2): total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
OFPT_BARRIER_REPLY (OF1.2):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This test checks that OFPT_PACKET_OUT accepts both OFPP_NONE (as
dnl specified by OpenFlow 1.1) and OFPP_CONTROLLER (used by some
dnl controllers despite the spec) as meaning a packet that was generated
dnl by the controller.
AT_SETUP([ofproto - packet-out from controller (OpenFlow 1.1)])
OVS_VSWITCHD_START

# Start a monitor listening for packet-ins.
AT_CHECK([ovs-ofctl -O OpenFlow11 -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0209000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CAPTURE_FILE([monitor.log])

# Send some packet-outs with OFPP_NONE and OFPP_CONTROLLER (65533) as in_port.
AT_CHECK([ovs-ofctl -O OpenFlow11 packet-out br0 none controller '0001020304050010203040501234'])
AT_CHECK([ovs-ofctl -O OpenFlow11 packet-out br0 4294967293 controller '0001020304050010203040505678'])

# Stop the monitor and check its output.
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN (OF1.1): total_len=14 in_port=ANY (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_PACKET_IN (OF1.1): total_len=14 in_port=CONTROLLER (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x5678
OFPT_BARRIER_REPLY (OF1.1):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This test checks that metadata and userdata are encoded in NXT_PACKET_IN2.
AT_SETUP([ofproto - packet-out with metadata and userdata (NXT_PACKET_IN2)])
OVS_VSWITCHD_START

# Start a monitor listening for packet-ins.
AT_CHECK([ovs-ofctl -P nxt_packet_in2 monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CAPTURE_FILE([monitor.log])

# Send a packet-out with a load action to set some metadata, and forward to controller
AT_CHECK([ovs-ofctl packet-out br0 controller 'load(0xfafafafa5a5a5a5a->OXM_OF_METADATA[[0..63]]), load(0xaa->NXM_NX_PKT_MARK[[]]), controller(userdata=01.02.03.04.05)' '0001020304050010203040501234'])

# Stop the monitor and check its output.
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
NXT_PACKET_IN2: total_len=14 pkt_mark=0xaa,metadata=0xfafafafa5a5a5a5a,in_port=CONTROLLER (via action) data_len=14 (unbuffered)
 userdata=01.02.03.04.05
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_BARRIER_REPLY:
])

OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This test checks that metadata is encoded in packet_in structures,
dnl supported by NXAST.
AT_SETUP([ofproto - packet-out with metadata (NXM)])
OVS_VSWITCHD_START

# Start a monitor listening for packet-ins.
AT_CHECK([ovs-ofctl -P nxt_packet_in monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0109000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CAPTURE_FILE([monitor.log])

# Send a packet-out with a load action to set some metadata, and forward to controller
AT_CHECK([ovs-ofctl packet-out br0 controller 'load(0xfafafafa5a5a5a5a->OXM_OF_METADATA[[0..63]]), load(0xaa->NXM_NX_PKT_MARK[[]]), controller' '0001020304050010203040501234'])

# Stop the monitor and check its output.
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
NXT_PACKET_IN: total_len=14 pkt_mark=0xaa,metadata=0xfafafafa5a5a5a5a,in_port=CONTROLLER (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_BARRIER_REPLY:
])

OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This test checks that metadata is encoded in packet_in structures,
dnl supported by NXAST.
AT_SETUP([ofproto - packet-out with metadata (OpenFlow 1.2)])
OVS_VSWITCHD_START

# Start a monitor listening for packet-ins.
AT_CHECK([ovs-ofctl -O OpenFlow12 -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CAPTURE_FILE([monitor.log])

# Send a packet-out with a set-field action to set some metadata, and forward to controller
AT_CHECK([ovs-ofctl -O OpenFlow12 packet-out br0 none 'set_field:0xfafafafa5a5a5a5a->metadata, controller' '0001020304050010203040501234'])

# Stop the monitor and check its output.
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN (OF1.2): total_len=14 metadata=0xfafafafa5a5a5a5a,in_port=ANY (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_BARRIER_REPLY (OF1.2):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This test checks that metadata is encoded in packet_in structures,
dnl supported by NXAST.
AT_SETUP([ofproto - packet-out with metadata and dual set_field (OpenFlow 1.3)])
OVS_VSWITCHD_START

# Start a monitor listening for packet-ins.
AT_CHECK([ovs-ofctl -O OpenFlow13 -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0409000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CAPTURE_FILE([monitor.log])

# Send a packet-out with a couple of set-field action to set some metadata, and forward to controller
AT_CHECK([ovs-ofctl -O OpenFlow13 packet-out br0 none 'set_field:0xfafafafa5a5a5a5a->metadata, set_field:0x6b->metadata, controller' '0001020304050010203040501234'])

# Stop the monitor and check its output.
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN (OF1.3): total_len=14 metadata=0x6b,in_port=ANY (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_BARRIER_REPLY (OF1.3):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

dnl This test checks that tunnel metadata is encoded in packet_in structures.
AT_SETUP([ofproto - packet-out with tunnel metadata (OpenFlow 1.2)])
OVS_VSWITCHD_START

# Start a monitor listening for packet-ins.
AT_CHECK([ovs-ofctl -O OpenFlow12 -P standard monitor br0 --detach --no-chdir --pidfile])
ovs-appctl -t ovs-ofctl ofctl/send 0309000c0123456700000080
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
AT_CAPTURE_FILE([monitor.log])

# Send a packet-out with set field actions to set some tunnel metadata, and forward to controller
AT_CHECK([ovs-ofctl -O OpenFlow12 packet-out br0 none 'set_field:127.0.0.1->tun_src,set_field:0x01020304->tun_id,set_field:192.168.0.1->tun_dst, controller' '0001020304050010203040501234'])

# Stop the monitor and check its output.
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([sed 's/ (xid=0x[[0-9a-fA-F]]*)//' monitor.log], [0], [dnl
OFPT_PACKET_IN (OF1.2): total_len=14 tun_id=0x1020304,tun_src=127.0.0.1,tun_dst=192.168.0.1,in_port=ANY (via action) data_len=14 (unbuffered)
vlan_tci=0x0000,dl_src=00:10:20:30:40:50,dl_dst=00:01:02:03:04:05,dl_type=0x1234
OFPT_BARRIER_REPLY (OF1.2):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

m4_divert_push([PREPARE_TESTS])
# Sorts groups of lines that start with a space, without moving them
# past the nearest line that does not start with a space.
multiline_sort () {
    ${PERL} -e '
        use warnings;
        use strict;
        my @buffer = ();
        while (<STDIN>) {
            if (/^ /) {
                push(@buffer, $_);
            } else {
                print $_ foreach sort(@buffer);
                print $_;
                @buffer = ();
            }
        }
        print $_ foreach sort(@buffer);
'
}
m4_divert_pop([PREPARE_TESTS])

AT_SETUP([ofproto - flow monitoring])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:1

# Start a monitor watching the flow table and check the initial reply.
ovs-ofctl monitor br0 watch: --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])
ovs-appctl -t ovs-ofctl ofctl/barrier
AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log], [0],
  [NXST_FLOW_MONITOR reply:
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:1
OFPT_BARRIER_REPLY:
])

# Add, delete, and modify some flows and check the updates.
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
ovs-ofctl add-flow br0 in_port=0,dl_vlan=124,actions=output:2
ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:5
ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,dl_vlan_pcp=0,actions=output:6
ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,dl_vlan_pcp=1,actions=output:7
ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:8
ovs-ofctl add-flow br0 in_port=0,dl_vlan=65535,dl_vlan_pcp=0,actions=output:9
ovs-ofctl add-flow br0 in_port=0,dl_vlan=65535,dl_vlan_pcp=1,actions=output:10
ovs-ofctl add-flow br0 in_port=0,dl_vlan=65535,actions=output:11
ovs-ofctl add-flow br0 in_port=0,dl_vlan=8191,dl_vlan_pcp=0,actions=output:12
ovs-ofctl add-flow br0 in_port=0,dl_vlan=8191,dl_vlan_pcp=1,actions=output:13
ovs-ofctl add-flow br0 in_port=0,dl_vlan=8191,actions=output:14
ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,dl_vlan_pcp=0,actions=output:15
ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,dl_vlan_pcp=1,actions=output:16
ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,actions=output:17
ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,dl_vlan_pcp=0,actions=output:18
ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,dl_vlan_pcp=1,actions=output:19
ovs-ofctl add-flow br0 in_port=0,dl_vlan=0,actions=output:20
ovs-ofctl add-flow br0 in_port=0,dl_vlan_pcp=0,actions=output:21
ovs-ofctl add-flow br0 in_port=0,dl_vlan_pcp=1,actions=output:22
ovs-ofctl add-flow br0 in_port=0,actions=output:23
ovs-ofctl mod-flows br0 dl_vlan=123,actions=output:3
ovs-ofctl mod-flows br0 cookie=5,dl_vlan=123,actions=output:3
ovs-ofctl del-flows br0 dl_vlan=123
ovs-ofctl del-flows br0
ovs-appctl -t ovs-ofctl ofctl/barrier
AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log | multiline_sort], [0],
[NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=124 actions=output:2
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:5
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:6
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123,dl_vlan_pcp=1 actions=output:7
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:8
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=0 actions=output:9
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=1 actions=output:10
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,vlan_tci=0x0000 actions=output:11
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=4095,dl_vlan_pcp=0 actions=output:12
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=4095,dl_vlan_pcp=1 actions=output:13
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=4095 actions=output:14
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=0 actions=output:15
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=1 actions=output:16
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0 actions=output:17
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=0 actions=output:18
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=1 actions=output:19
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=0 actions=output:20
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan_pcp=0 actions=output:21
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan_pcp=1 actions=output:22
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=0 actions=output:23
NXST_FLOW_MONITOR reply (xid=0x0):
 event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:3
 event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:3
 event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123,dl_vlan_pcp=1 actions=output:3
NXST_FLOW_MONITOR reply (xid=0x0):
 event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123 actions=output:3
 event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:3
 event=MODIFIED table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=1 actions=output:3
NXST_FLOW_MONITOR reply (xid=0x0):
 event=DELETED reason=delete table=0 cookie=0x5 in_port=0,dl_vlan=123 actions=output:3
 event=DELETED reason=delete table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=0 actions=output:3
 event=DELETED reason=delete table=0 cookie=0x5 in_port=0,dl_vlan=123,dl_vlan_pcp=1 actions=output:3
NXST_FLOW_MONITOR reply (xid=0x0):
 event=DELETED reason=delete table=0 cookie=0 in_port=0 actions=output:23
 event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=0 actions=output:20
 event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=0 actions=output:18
 event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=0,dl_vlan_pcp=1 actions=output:19
 event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=124 actions=output:2
 event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=4095 actions=output:14
 event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=4095,dl_vlan_pcp=0 actions=output:12
 event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan=4095,dl_vlan_pcp=1 actions=output:13
 event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan_pcp=0 actions=output:21
 event=DELETED reason=delete table=0 cookie=0 in_port=0,dl_vlan_pcp=1 actions=output:22
 event=DELETED reason=delete table=0 cookie=0 in_port=0,vlan_tci=0x0000 actions=output:11
OFPT_BARRIER_REPLY:
])

# Check that our own changes are reported as full updates.
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
ovs-ofctl add-flow br0 in_port=1,actions=output:2
ovs-ofctl add-flow br0 in_port=2,actions=output:1
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/send 010e004812345678003fffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000003000000000000ffffffffffff0000
ovs-appctl -t ovs-ofctl ofctl/barrier
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip], [0], [NXST_FLOW reply:
])
AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log | multiline_sort], [0],
[NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=1 actions=output:2
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=2 actions=output:1
OFPT_BARRIER_REPLY:
send: OFPT_FLOW_MOD: DEL priority=0 actions=drop
NXST_FLOW_MONITOR reply (xid=0x0):
 event=DELETED reason=delete table=0 cookie=0 in_port=1 actions=output:2
 event=DELETED reason=delete table=0 cookie=0 in_port=2 actions=output:1
OFPT_BARRIER_REPLY:
])

OVS_APP_EXIT_AND_WAIT([ovs-ofctl])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - flow monitoring with !own])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:1

# Start a monitor watching the flow table and check the initial reply.
ovs-ofctl monitor br0 watch:\!own --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])
ovs-appctl -t ovs-ofctl ofctl/barrier
AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log], [0],
  [NXST_FLOW_MONITOR reply:
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:1
OFPT_BARRIER_REPLY:
])

# Check that our own changes are reported as abbreviations.
ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log
ovs-ofctl add-flow br0 in_port=1,actions=output:2
ovs-ofctl add-flow br0 in_port=2,actions=output:1
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/send 010e004812345678003fffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000003000000000000ffffffffffff0000
ovs-appctl -t ovs-ofctl ofctl/barrier
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip], [0], [NXST_FLOW reply:
])
AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log], [0],
[NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=1 actions=output:2
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ADDED table=0 cookie=0 in_port=2 actions=output:1
OFPT_BARRIER_REPLY:
send: OFPT_FLOW_MOD: DEL priority=0 actions=drop
NXST_FLOW_MONITOR reply (xid=0x0):
 event=ABBREV xid=0x12345678
OFPT_BARRIER_REPLY:
])

OVS_APP_EXIT_AND_WAIT([ovs-ofctl])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - flow monitoring with out_port])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

ovs-ofctl add-flow br0 in_port=0,dl_vlan=121,actions=output:1
ovs-ofctl add-flow br0 in_port=0,dl_vlan=122,actions=output:1
ovs-ofctl add-flow br0 in_port=0,dl_vlan=123,actions=output:2

# Start a monitor watching the flow table and check the initial reply.
ovs-ofctl monitor br0 watch:out_port=2 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])
ovs-appctl -t ovs-ofctl ofctl/barrier
AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log], [0],
  [NXST_FLOW_MONITOR reply:
 event=ADDED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:2
OFPT_BARRIER_REPLY:
])

ovs-appctl -t ovs-ofctl ofctl/set-output-file monitor.log

# Add, modify flows and check the updates.
ovs-ofctl mod-flows br0 dl_vlan=121,actions=drop
ovs-ofctl mod-flows br0 dl_vlan=122,actions=output:1,output:2
ovs-appctl -t ovs-ofctl ofctl/barrier

ovs-ofctl mod-flows br0 dl_vlan=123,actions=output:1,output:2
ovs-appctl -t ovs-ofctl ofctl/barrier

ovs-ofctl mod-flows br0 dl_vlan=122,actions=output:1
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-ofctl mod-flows br0 dl_vlan=123,actions=output:2
ovs-appctl -t ovs-ofctl ofctl/barrier

AT_CHECK([sed 's/ (xid=0x[[1-9a-fA-F]][[0-9a-fA-F]]*)//' monitor.log], [0],
[NXST_FLOW_MONITOR reply (xid=0x0):
 event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=122 actions=output:1,output:2
OFPT_BARRIER_REPLY:
NXST_FLOW_MONITOR reply (xid=0x0):
 event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:1,output:2
OFPT_BARRIER_REPLY:
NXST_FLOW_MONITOR reply (xid=0x0):
 event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=122 actions=output:1
OFPT_BARRIER_REPLY:
NXST_FLOW_MONITOR reply (xid=0x0):
 event=MODIFIED table=0 cookie=0 in_port=0,dl_vlan=123 actions=output:2
OFPT_BARRIER_REPLY:
])

OVS_APP_EXIT_AND_WAIT([ovs-ofctl])
OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - flow monitoring pause and resume])
AT_KEYWORDS([monitor])

# The maximum socket receive buffer size is important for this test, which
# tests behavior when the receive buffer overflows.
if test -e /proc/sys/net/core/rmem_max; then
    # Linux
    rmem_max=`cat /proc/sys/net/core/rmem_max`
elif rmem_max=`sysctl -n net.inet.tcp.recvbuf_max 2>/dev/null`; then
    : # FreeBSD, NetBSD
else
    # Don't know how to get maximum socket receive buffer on this OS
    AT_SKIP_IF([:])
fi
# Calculate the total amount of queuing: rmem_max in the kernel, 128 kB
# in ofproto sending userspace (see ofmonitor_flush() in connmgr.c).
queue_size=`expr $rmem_max + 128 \* 1024`
echo rmem_max=$rmem_max queue_size=$queue_size

# If there's too much queuing skip the test to avoid timing out.
AT_SKIP_IF([test $rmem_max -gt 1048576])

# Each flow update message takes up at least 48 bytes of space in queues
# and in practice more than that.
n_msgs=`expr $queue_size / 48`
echo n_msgs=$n_msgs

OVS_VSWITCHD_START

# Start a monitor watching the flow table, then make it block.
on_exit 'kill `cat ovs-ofctl.pid`'
ovs-ofctl monitor br0 watch: --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])
ovs-appctl -t ovs-ofctl ofctl/block

# Add $n_msgs flows.
(echo "in_port=2,actions=output:2"
${PERL} -e '
    for ($i = 0; $i < '$n_msgs'; $i++) {
        print "cookie=1,reg1=$i,actions=drop\n";
    }
') > flows.txt
AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
# Check that multipart flow dumps work properly:
AT_CHECK([ovs-ofctl diff-flows br0 flows.txt])
AT_CHECK([ovs-ofctl add-flow br0 in_port=1,cookie=3,actions=drop])
AT_CHECK([ovs-ofctl mod-flows br0 in_port=2,cookie=2,actions=output:2])
AT_CHECK([ovs-ofctl del-flows br0 cookie=1/-1])

ovs-appctl -t ovs-ofctl ofctl/unblock

# Wait for the connection resumed.
# A barrier doesn't work for this purpose.
#    https://www.mail-archive.com/dev@openvswitch.org/msg27013.html
#    https://www.mail-archive.com/dev@openvswitch.org/msg27675.html
OVS_WAIT_UNTIL([grep NXT_FLOW_MONITOR_RESUMED monitor.log])

OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

# Check that the flow monitor reported the same number of flows
# added and deleted, but fewer than we actually added and deleted.
adds=`grep -c 'ADDED.*reg1=' monitor.log`
deletes=`grep -c 'DELETED.*reg1=' monitor.log`
echo adds=$adds deletes=$deletes
AT_CHECK([test $adds -gt 100 && test $adds -lt $n_msgs])
AT_CHECK([test $adds = $deletes])

# Check that the flow monitor reported everything in the expected order:
#
#     event=ADDED table=0 cookie=0x1 reg1=0x22
# ...
#    NXT_FLOW_MONITOR_PAUSED:
# ...
#     event=DELETED reason=delete table=0 cookie=0x1 reg1=0x22
# ...
#     event=ADDED table=0 cookie=0x3 in_port=1
#     event=MODIFIED table=0 cookie=0x2 in_port=2 actions=output:2
#    NXT_FLOW_MONITOR_RESUMED:
#
# except that, between the PAUSED and RESUMED, the order of the ADDED
# and MODIFIED lines lines depends on hash order, that is, it varies
# as we change the hash function or change architecture.  Therefore,
# we use a couple of tests below to accept both orders.
AT_CHECK([ofctl_strip < monitor.log | sed -n -e '
/reg1=0x22$/p
/cookie=0x[[23]]/p
/NXT_FLOW_MONITOR_PAUSED:/p
/NXT_FLOW_MONITOR_RESUMED:/p
' > monitor.log.subset])
AT_CHECK([grep -v MODIFIED monitor.log.subset], [0], [dnl
 event=ADDED table=0 cookie=0x1 reg1=0x22
NXT_FLOW_MONITOR_PAUSED:
 event=DELETED reason=delete table=0 cookie=0x1 reg1=0x22
 event=ADDED table=0 cookie=0x3 in_port=1
NXT_FLOW_MONITOR_RESUMED:
])
AT_CHECK([grep -v ADDED monitor.log.subset], [0], [dnl
NXT_FLOW_MONITOR_PAUSED:
 event=DELETED reason=delete table=0 cookie=0x1 reg1=0x22
 event=MODIFIED table=0 cookie=0x2 in_port=2 actions=output:2
NXT_FLOW_MONITOR_RESUMED:
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - event filtering (OpenFlow 1.3)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Send an OpenFlow13 message (04), OFPT_GET_ASYNC_REQUEST (1a), length (8), xid (0a)
ovs-appctl -t ovs-ofctl ofctl/send 041a00080000000a
ovs-appctl -t ovs-ofctl ofctl/barrier

# Check default setting
read -r -d '' expected <<'EOF'
EOF

AT_CHECK([ofctl_strip < monitor.log], [], [dnl
send: OFPT_GET_ASYNC_REQUEST (OF1.3):
OFPT_GET_ASYNC_REPLY (OF1.3):
 master:
       PACKET_IN: no_match action
     PORT_STATUS: add delete modify
    FLOW_REMOVED: idle hard delete
     ROLE_STATUS: (off)
    TABLE_STATUS: (off)
  REQUESTFORWARD: (off)

 slave:
       PACKET_IN: (off)
     PORT_STATUS: add delete modify
    FLOW_REMOVED: (off)
     ROLE_STATUS: (off)
    TABLE_STATUS: (off)
  REQUESTFORWARD: (off)
OFPT_BARRIER_REPLY (OF1.3):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - ofport_request])
OVS_VSWITCHD_START
add_of_ports br0 1 2 3

set_and_check_specific_ofports () {
    ovs-vsctl set Interface p1 ofport_request="$1" -- \
	      set Interface p2 ofport_request="$2" -- \
	      set Interface p3 ofport_request="$3"
    ofports=`ovs-vsctl get Interface p1 ofport -- \
		       get Interface p2 ofport -- \
		       get Interface p3 ofport`
    AT_CHECK_UNQUOTED([echo $ofports], [0], [$1 $2 $3
])
}
for pre in      '1 2 3' '1 3 2' '2 1 3' '2 3 1' '3 1 2' '3 2 1'; do
    for post in '1 2 3' '1 3 2' '2 1 3' '2 3 1' '3 1 2' '3 2 1'; do
        echo -----------------------------------------------------------
        echo "Check changing port numbers from $pre to $post"
	set_and_check_specific_ofports $pre
	set_and_check_specific_ofports $post
    done
done

ovs-vsctl del-port p3

set_and_check_poorly_specified_ofports () {
    ovs-vsctl set Interface p1 ofport_request="$1" -- \
	      set Interface p2 ofport_request="$2"
    p1=`ovs-vsctl get Interface p1 ofport`
    p2=`ovs-vsctl get Interface p2 ofport`
    echo $p1 $p2

    AT_CHECK([test "$p1" != "$p2"])
    if test "$1" = "$2" && test "$1" != '[[]]'; then
        # One port number must be the requested one.
	AT_CHECK([test "$p1" = "$1" || test "$p2" = "$1"])
	# The other port number must be different (already tested above).
    else
        AT_CHECK([test "$1" = '[[]]' || test "$p1" = "$1"])
        AT_CHECK([test "$2" = '[[]]' || test "$p2" = "$2"])
    fi
}
for pre in      '1 2' '[[]] 2' '1 [[]]' '[[]] [[]]' '2 1' '[[]] 1' '2 [[]]' \
                '1 1' '2 2'; do
    for post in '1 2' '[[]] 2' '1 [[]]' '[[]] [[]]' '2 1' '[[]] 1' '2 [[]]' \
                '1 1' '2 2'; do
        echo -----------------------------------------------------------
        echo "Check changing port numbers from $pre to $post"
        set_and_check_poorly_specified_ofports $pre
        set_and_check_poorly_specified_ofports $post
    done
done
OVS_VSWITCHD_STOP
AT_CLEANUP


AT_SETUP([ofproto - bundle open (OpenFlow 1.4)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Send an OpenFlow14 message (05), OFPT_BUNDLE_CONTROL (21), length (10), xid (0a)
ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.4):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle double open (OpenFlow 1.4)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Send twice an OpenFlow14 message (05), OFPT_BUNDLE_CONTROL (21), length (10), xid (0a)
ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.4):
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.4):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle close without open (OpenFlow 1.4)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.4):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle double close (OpenFlow 1.4)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Open, Close, Close
ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.4):
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=CLOSE_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.4):
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_ERROR (OF1.4): OFPBFC_BUNDLE_CLOSED
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.4):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle close, different flags (OpenFlow 1.4)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Open, Close, Close
ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 02 00 01"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.4):
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
OFPT_ERROR (OF1.4): OFPBFC_BAD_FLAGS
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
OFPT_BARRIER_REPLY (OF1.4):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle commit without open (OpenFlow 1.4)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Open, Close, Close
ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 04 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=COMMIT_REQUEST flags=ordered
OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=COMMIT_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.4):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle commit, different flags (OpenFlow 1.4)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Open, Close, Close
ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 04 00 01"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.4):
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=COMMIT_REQUEST flags=atomic
OFPT_ERROR (OF1.4): OFPBFC_BAD_FLAGS
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=COMMIT_REQUEST flags=atomic
OFPT_BARRIER_REPLY (OF1.4):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle discard without open (OpenFlow 1.4)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow14 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Open, Close, Close
ovs-appctl -t ovs-ofctl ofctl/send "05 21 00 10 00 00 00 0a 00 00 00 01 00 06 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=DISCARD_REQUEST flags=ordered
OFPT_ERROR (OF1.4): OFPBFC_BAD_ID
OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0x1 type=DISCARD_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.4):
])

OVS_VSWITCHD_STOP
AT_CLEANUP


AT_SETUP([ofproto - bundle with multiple flow mods (OpenFlow 1.4)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

AT_CHECK([ovs-appctl vlog/set vconn:dbg])

AT_CHECK([ovs-ofctl del-flows br0])

AT_DATA([flows.txt], [dnl
add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=1
add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=2
add idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=3
add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=4
delete
add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=5
add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=6
add idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=7
delete in_port=2 dl_src=00:88:99:aa:bb:cc
])

AT_CHECK([ovs-ofctl --bundle add-flows br0 flows.txt])

AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=output:5
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:6
NXST_FLOW reply:
])

AT_DATA([flows.txt], [dnl
modify actions=drop
modify_strict in_port=2 dl_src=00:77:88:99:aa:bb actions=7
])

AT_CHECK([ovs-ofctl --bundle add-flows br0 flows.txt])

AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:7
NXST_FLOW reply:
])

# Adding an existing flow acts as a modify, and delete_strict also works.
AT_DATA([flows.txt], [dnl
add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=8
delete_strict in_port=2 dl_src=00:66:77:88:99:aa
add in_port=2 dl_src=00:66:77:88:99:aa actions=drop
])

AT_CHECK([ovs-ofctl --bundle add-flows br0 flows.txt])

AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:8
 in_port=2,dl_src=00:66:77:88:99:aa actions=drop
NXST_FLOW reply:
])

dnl Check logs for OpenFlow trace
# Prevent race.
OVS_WAIT_UNTIL([vconn_sub < ovs-vswitchd.log | test `grep -- "|vconn|DBG|unix: sent (Success): NXST_FLOW reply" | wc -l` -ge 3])
AT_CHECK([print_vconn_debug | vconn_sub | ofctl_strip], [0], [dnl
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO:
 version bitmap: 0x01
vconn|DBG|unix: negotiated OpenFlow version 0x01 (we support version 0x07 and earlier, peer supports version 0x01)
vconn|DBG|unix: received: OFPT_FLOW_MOD: DEL actions=drop
vconn|DBG|unix: received: OFPT_BARRIER_REQUEST:
vconn|DBG|unix: sent (Success): OFPT_BARRIER_REPLY:
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO (OF1.4):
 version bitmap: 0x05
vconn|DBG|unix: negotiated OpenFlow version 0x05 (we support version 0x07 and earlier, peer supports version 0x05)
vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0 type=OPEN_REQUEST flags=atomic ordered
vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0 type=OPEN_REPLY flags=0
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:66:77:88:99:aa idle:50 actions=output:1
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:77:88:99:aa:bb idle:60 actions=output:2
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:88:99:aa:bb:cc idle:70 actions=output:3
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:66:77:88:99:aa idle:50 actions=output:4
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): DEL table:255 actions=drop
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:66:77:88:99:aa idle:50 actions=output:5
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:77:88:99:aa:bb idle:60 actions=output:6
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:88:99:aa:bb:cc idle:70 actions=output:7
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): DEL table:255 in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0 type=COMMIT_REPLY flags=0
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO:
 version bitmap: 0x01
vconn|DBG|unix: negotiated OpenFlow version 0x01 (we support version 0x07 and earlier, peer supports version 0x01)
vconn|DBG|unix: received: NXT_SET_FLOW_FORMAT: format=nxm
vconn|DBG|unix: received: OFPT_BARRIER_REQUEST:
vconn|DBG|unix: sent (Success): OFPT_BARRIER_REPLY:
vconn|DBG|unix: received: NXST_FLOW request:
vconn|DBG|unix: sent (Success): NXST_FLOW reply:
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=output:5
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:6
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO (OF1.4):
 version bitmap: 0x05
vconn|DBG|unix: negotiated OpenFlow version 0x05 (we support version 0x07 and earlier, peer supports version 0x05)
vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0 type=OPEN_REQUEST flags=atomic ordered
vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0 type=OPEN_REPLY flags=0
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): MOD actions=drop
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): MOD_STRICT in_port=2,dl_src=00:77:88:99:aa:bb actions=output:7
vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0 type=COMMIT_REPLY flags=0
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO:
 version bitmap: 0x01
vconn|DBG|unix: negotiated OpenFlow version 0x01 (we support version 0x07 and earlier, peer supports version 0x01)
vconn|DBG|unix: received: NXT_SET_FLOW_FORMAT: format=nxm
vconn|DBG|unix: received: OFPT_BARRIER_REQUEST:
vconn|DBG|unix: sent (Success): OFPT_BARRIER_REPLY:
vconn|DBG|unix: received: NXST_FLOW request:
vconn|DBG|unix: sent (Success): NXST_FLOW reply:
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:7
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO (OF1.4):
 version bitmap: 0x05
vconn|DBG|unix: negotiated OpenFlow version 0x05 (we support version 0x07 and earlier, peer supports version 0x05)
vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0 type=OPEN_REQUEST flags=atomic ordered
vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0 type=OPEN_REPLY flags=0
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:77:88:99:aa:bb idle:60 actions=output:8
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): DEL_STRICT table:255 in_port=2,dl_src=00:66:77:88:99:aa actions=drop
vconn|DBG|unix: received: OFPT_BUNDLE_ADD_MESSAGE (OF1.4):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.4): ADD in_port=2,dl_src=00:66:77:88:99:aa actions=drop
vconn|DBG|unix: received: OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
vconn|DBG|unix: sent (Success): OFPT_BUNDLE_CONTROL (OF1.4):
 bundle_id=0 type=COMMIT_REPLY flags=0
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO:
 version bitmap: 0x01
vconn|DBG|unix: negotiated OpenFlow version 0x01 (we support version 0x07 and earlier, peer supports version 0x01)
vconn|DBG|unix: received: NXT_SET_FLOW_FORMAT: format=nxm
vconn|DBG|unix: received: OFPT_BARRIER_REQUEST:
vconn|DBG|unix: sent (Success): OFPT_BARRIER_REPLY:
vconn|DBG|unix: received: NXST_FLOW request: 
vconn|DBG|unix: sent (Success): NXST_FLOW reply:
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:8
 in_port=2,dl_src=00:66:77:88:99:aa actions=drop
])

OVS_VSWITCHD_STOP
AT_CLEANUP


AT_SETUP([ofproto - failing bundle commit (OpenFlow 1.4)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

AT_CHECK([ovs-ofctl del-flows br0])

ovs-ofctl add-flows br0 - <<EOF
idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=11
idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=22
idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=33
EOF
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=output:11
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:22
 idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=output:33
NXST_FLOW reply:
])

# last line uses illegal table number (OVS internal table)
AT_DATA([flows.txt], [dnl
add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=1
add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=2
add idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=3
modify idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=4
delete
add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=5
add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=6
add idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=7
delete in_port=2 dl_src=00:88:99:aa:bb:cc
add table=254 actions=drop
])

AT_CHECK([ovs-ofctl --bundle add-flows br0 flows.txt 2>&1 | sed '/|WARN|/d
s/unix:.*br0\.mgmt/unix:br0.mgmt/' | sed 's/(.* error)/(error)/'],
[0], [dnl
OFPT_ERROR (OF1.4) (xid=0xb): OFPBRC_EPERM
OFPT_FLOW_MOD (OF1.4) (xid=0xb): ADD table:254 actions=drop
OFPT_ERROR (OF1.4) (xid=0xd): OFPBFC_MSG_FAILED
OFPT_BUNDLE_CONTROL (OF1.4) (xid=0xd):
 bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
ovs-ofctl: talking to unix:br0.mgmt (error)
])

AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=output:11
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:22
 idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=output:33
NXST_FLOW reply:
])

OVS_VSWITCHD_STOP
AT_CLEANUP


AT_SETUP([ofproto - bundle open (OpenFlow 1.3)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Send an OpenFlow13 message (04), OFPT_EXPERIMENTER (04), length (0018),
# xid (0000000a), ONF_EXPERIMENTER_ID (4F4E4600),
# ONFT_BUNDLE_CONTROL (2300 = 0x08FC), bundle id (00000001),
# message type (0000), and flags (0002)
ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [], [dnl
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.3):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle double open (OpenFlow 1.3)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Send twice an OpenFlow13 message (04), OFPT_EXPERIMENTER (04), length (0018),
# xid (0000000a), ONF_EXPERIMENTER_ID (4F4E4600),
# ONFT_BUNDLE_CONTROL (2300 = 0x08FC), bundle id (00000001),
# message type (0000), and flags (0002)
ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.3):
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_ERROR (OF1.3): OFPBFC_BAD_ID
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.3):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle close without open (OpenFlow 1.3)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 02 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_ERROR (OF1.3): OFPBFC_BAD_ID
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.3):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle double close (OpenFlow 1.3)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Open, Close, Close
ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 02 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 02 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.3):
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=CLOSE_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.3):
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_ERROR (OF1.3): OFPBFC_BUNDLE_CLOSED
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=CLOSE_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.3):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle close, different flags (OpenFlow 1.3)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Open, Close
ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 02 00 01"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.3):
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
OFPT_ERROR (OF1.3): OFPBFC_BAD_FLAGS
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=CLOSE_REQUEST flags=atomic
OFPT_BARRIER_REPLY (OF1.3):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle commit without open (OpenFlow 1.3)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Commit
ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 04 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=COMMIT_REQUEST flags=ordered
OFPT_ERROR (OF1.3): OFPBFC_BAD_ID
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=COMMIT_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.3):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle commit, different flags (OpenFlow 1.3)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Open, Commit
ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 00 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 04 00 01"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=OPEN_REQUEST flags=ordered
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=OPEN_REPLY flags=0
OFPT_BARRIER_REPLY (OF1.3):
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=COMMIT_REQUEST flags=atomic
OFPT_ERROR (OF1.3): OFPBFC_BAD_FLAGS
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=COMMIT_REQUEST flags=atomic
OFPT_BARRIER_REPLY (OF1.3):
])

OVS_VSWITCHD_STOP
AT_CLEANUP

AT_SETUP([ofproto - bundle discard without open (OpenFlow 1.3)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

# Start a monitor, use the required protocol version
ovs-ofctl -O OpenFlow13 monitor br0 --detach --no-chdir --pidfile >monitor.log 2>&1
AT_CAPTURE_FILE([monitor.log])

# Discard
ovs-appctl -t ovs-ofctl ofctl/send "04 04 00 18 00 00 00 0a 4F 4E 46 00 00 00 08 FC 00 00 00 01 00 06 00 02"
ovs-appctl -t ovs-ofctl ofctl/barrier
OVS_APP_EXIT_AND_WAIT([ovs-ofctl])

AT_CHECK([ofctl_strip < monitor.log], [0], [dnl
send: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=DISCARD_REQUEST flags=ordered
OFPT_ERROR (OF1.3): OFPBFC_BAD_ID
ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0x1 type=DISCARD_REQUEST flags=ordered
OFPT_BARRIER_REPLY (OF1.3):
])

OVS_VSWITCHD_STOP
AT_CLEANUP


AT_SETUP([ofproto - bundle with multiple flow mods (OpenFlow 1.3)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

AT_CHECK([ovs-appctl vlog/set vconn:dbg])

AT_CHECK([ovs-ofctl del-flows br0])

AT_DATA([flows.txt], [dnl
add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=1
add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=2
add idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=3
add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=4
delete
add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=5
add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=6
add idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=7
delete in_port=2 dl_src=00:88:99:aa:bb:cc
])

AT_CHECK([ovs-ofctl -O OpenFlow13 --bundle add-flows br0 flows.txt])

AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=output:5
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:6
NXST_FLOW reply:
])

AT_DATA([flows.txt], [dnl
modify actions=drop
modify_strict in_port=2 dl_src=00:77:88:99:aa:bb actions=7
])

AT_CHECK([ovs-ofctl -O OpenFlow13 --bundle add-flows br0 flows.txt])

AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:7
NXST_FLOW reply:
])

# Adding an existing flow acts as a modify, and delete_strict also works.
AT_DATA([flows.txt], [dnl
add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=8
delete_strict in_port=2 dl_src=00:66:77:88:99:aa
add in_port=2 dl_src=00:66:77:88:99:aa actions=drop
])

AT_CHECK([ovs-ofctl -O OpenFlow13 --bundle add-flows br0 flows.txt])

AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:8
 in_port=2,dl_src=00:66:77:88:99:aa actions=drop
NXST_FLOW reply:
])

dnl Check logs for OpenFlow trace
# Prevent race.
OVS_WAIT_UNTIL([vconn_sub < ovs-vswitchd.log | test `grep -- "|vconn|DBG|unix: sent (Success): NXST_FLOW reply" | wc -l` -ge 3])
AT_CHECK([print_vconn_debug | vconn_sub | ofctl_strip], [0], [dnl
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO:
 version bitmap: 0x01
vconn|DBG|unix: negotiated OpenFlow version 0x01 (we support version 0x07 and earlier, peer supports version 0x01)
vconn|DBG|unix: received: OFPT_FLOW_MOD: DEL actions=drop
vconn|DBG|unix: received: OFPT_BARRIER_REQUEST:
vconn|DBG|unix: sent (Success): OFPT_BARRIER_REPLY:
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO (OF1.3):
 version bitmap: 0x04
vconn|DBG|unix: negotiated OpenFlow version 0x04 (we support version 0x07 and earlier, peer supports version 0x04)
vconn|DBG|unix: received: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0 type=OPEN_REQUEST flags=atomic ordered
vconn|DBG|unix: sent (Success): ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0 type=OPEN_REPLY flags=0
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): ADD in_port=2,dl_src=00:66:77:88:99:aa idle:50 actions=output:1
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): ADD in_port=2,dl_src=00:77:88:99:aa:bb idle:60 actions=output:2
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): ADD in_port=2,dl_src=00:88:99:aa:bb:cc idle:70 actions=output:3
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): ADD in_port=2,dl_src=00:66:77:88:99:aa idle:50 actions=output:4
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): DEL table:255 actions=drop
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): ADD in_port=2,dl_src=00:66:77:88:99:aa idle:50 actions=output:5
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): ADD in_port=2,dl_src=00:77:88:99:aa:bb idle:60 actions=output:6
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): ADD in_port=2,dl_src=00:88:99:aa:bb:cc idle:70 actions=output:7
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): DEL table:255 in_port=2,dl_src=00:88:99:aa:bb:cc actions=drop
vconn|DBG|unix: received: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
vconn|DBG|unix: sent (Success): ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0 type=COMMIT_REPLY flags=0
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO:
 version bitmap: 0x01
vconn|DBG|unix: negotiated OpenFlow version 0x01 (we support version 0x07 and earlier, peer supports version 0x01)
vconn|DBG|unix: received: NXT_SET_FLOW_FORMAT: format=nxm
vconn|DBG|unix: received: OFPT_BARRIER_REQUEST:
vconn|DBG|unix: sent (Success): OFPT_BARRIER_REPLY:
vconn|DBG|unix: received: NXST_FLOW request:
vconn|DBG|unix: sent (Success): NXST_FLOW reply:
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=output:5
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:6
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO (OF1.3):
 version bitmap: 0x04
vconn|DBG|unix: negotiated OpenFlow version 0x04 (we support version 0x07 and earlier, peer supports version 0x04)
vconn|DBG|unix: received: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0 type=OPEN_REQUEST flags=atomic ordered
vconn|DBG|unix: sent (Success): ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0 type=OPEN_REPLY flags=0
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): MOD actions=drop
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): MOD_STRICT in_port=2,dl_src=00:77:88:99:aa:bb actions=output:7
vconn|DBG|unix: received: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
vconn|DBG|unix: sent (Success): ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0 type=COMMIT_REPLY flags=0
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO:
 version bitmap: 0x01
vconn|DBG|unix: negotiated OpenFlow version 0x01 (we support version 0x07 and earlier, peer supports version 0x01)
vconn|DBG|unix: received: NXT_SET_FLOW_FORMAT: format=nxm
vconn|DBG|unix: received: OFPT_BARRIER_REQUEST:
vconn|DBG|unix: sent (Success): OFPT_BARRIER_REPLY:
vconn|DBG|unix: received: NXST_FLOW request:
vconn|DBG|unix: sent (Success): NXST_FLOW reply:
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=drop
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:7
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO (OF1.3):
 version bitmap: 0x04
vconn|DBG|unix: negotiated OpenFlow version 0x04 (we support version 0x07 and earlier, peer supports version 0x04)
vconn|DBG|unix: received: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0 type=OPEN_REQUEST flags=atomic ordered
vconn|DBG|unix: sent (Success): ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0 type=OPEN_REPLY flags=0
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): ADD in_port=2,dl_src=00:77:88:99:aa:bb idle:60 actions=output:8
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): DEL_STRICT table:255 in_port=2,dl_src=00:66:77:88:99:aa actions=drop
vconn|DBG|unix: received: ONFT_BUNDLE_ADD_MESSAGE (OF1.3):
 bundle_id=0 flags=atomic ordered
OFPT_FLOW_MOD (OF1.3): ADD in_port=2,dl_src=00:66:77:88:99:aa actions=drop
vconn|DBG|unix: received: ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
vconn|DBG|unix: sent (Success): ONFT_BUNDLE_CONTROL (OF1.3):
 bundle_id=0 type=COMMIT_REPLY flags=0
vconn|DBG|unix: sent (Success): OFPT_HELLO (OF1.6):
 version bitmap: 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
vconn|DBG|unix: received: OFPT_HELLO:
 version bitmap: 0x01
vconn|DBG|unix: negotiated OpenFlow version 0x01 (we support version 0x07 and earlier, peer supports version 0x01)
vconn|DBG|unix: received: NXT_SET_FLOW_FORMAT: format=nxm
vconn|DBG|unix: received: OFPT_BARRIER_REQUEST:
vconn|DBG|unix: sent (Success): OFPT_BARRIER_REPLY:
vconn|DBG|unix: received: NXST_FLOW request: 
vconn|DBG|unix: sent (Success): NXST_FLOW reply:
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:8
 in_port=2,dl_src=00:66:77:88:99:aa actions=drop
])

OVS_VSWITCHD_STOP
AT_CLEANUP


AT_SETUP([ofproto - failing bundle commit (OpenFlow 1.3)])
AT_KEYWORDS([monitor])
OVS_VSWITCHD_START

AT_CHECK([ovs-ofctl del-flows br0])

ovs-ofctl add-flows br0 - <<EOF
idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=11
idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=22
idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=33
EOF
AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=output:11
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:22
 idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=output:33
NXST_FLOW reply:
])

# last line uses illegal table number (OVS internal table)
AT_DATA([flows.txt], [dnl
add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=1
add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=2
add idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=3
modify idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=4
delete
add idle_timeout=50 in_port=2 dl_src=00:66:77:88:99:aa actions=5
add idle_timeout=60 in_port=2 dl_src=00:77:88:99:aa:bb actions=6
add idle_timeout=70 in_port=2 dl_src=00:88:99:aa:bb:cc actions=7
delete in_port=2 dl_src=00:88:99:aa:bb:cc
add table=254 actions=drop
])

AT_CHECK([ovs-ofctl -O OpenFlow13 --bundle add-flows br0 flows.txt 2>&1 | sed '/|WARN|/d
s/unix:.*br0\.mgmt/unix:br0.mgmt/' | sed 's/(.* error)/(error)/'],
[0], [dnl
OFPT_ERROR (OF1.3) (xid=0xb): OFPBRC_EPERM
OFPT_FLOW_MOD (OF1.3) (xid=0xb): ADD table:254 actions=drop
OFPT_ERROR (OF1.3) (xid=0xd): OFPBFC_MSG_FAILED
ONFT_BUNDLE_CONTROL (OF1.3) (xid=0xd):
 bundle_id=0 type=COMMIT_REQUEST flags=atomic ordered
ovs-ofctl: talking to unix:br0.mgmt (error)
])

AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
 idle_timeout=50, in_port=2,dl_src=00:66:77:88:99:aa actions=output:11
 idle_timeout=60, in_port=2,dl_src=00:77:88:99:aa:bb actions=output:22
 idle_timeout=70, in_port=2,dl_src=00:88:99:aa:bb:cc actions=output:33
NXST_FLOW reply:
])

OVS_VSWITCHD_STOP
AT_CLEANUP