You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I'm trying to use adxl345 to configure inputshaper
i'm using a rpi4, latest docker image (even tried next tag and building manually)
My adxl345 unit is working properly, I tested spi mode using another software on the same rpi
First issue I got is
Failed to import `numpy` module, make sure it was installed via `~/klippy-env/bin/pip install` (refer to docs/Measuring_Resonances.md for more details).
as a workaround I manually installed numpy in the venv directly in the container.
Then I get this error
Invalid adxl345 id (got 0 vs e5)
I put klipper's recommended configuration like this
[adxl345]
cs_pin: host:None
[resonance_tester]
accel_chip: adxl345
probe_points:
110, 110, 20 # an example
I also tried multiple docker-compose config, using what you did in you adxl345 variant. Currently I have
klipper:
image: dimalo/klipper-moonraker:next
privileged: true
build:
dockerfile: ./klipper/Dockerfile
context: .
# if klipper cannot connect to the printer check permissions on rpi then add the group here
group_add:
- "996"
- "998"
- "5"
- "20"
cap_add:
- ALL
container_name: klipper
ports:
- 7125:7125
restart: unless-stopped
volumes:
- /dev:/dev
- gcode_files:/home/klippy/printer_data/gcodes
# be aware to create your own branch if you mount the config folder as it will be updated on the main branch
# that way you can merge upstream changes to your customized configs
- ./config:/home/klippy/printer_data/config
- moonraker_data:/home/klippy/.moonraker_database
# - <<your_config_path>>:/home/klippy/.config
# - ./printer.cfg:/home/klippy/.config/printer.cfg
# mount serial device - take care to grant sufficient permissions to the device: <host_dev>:<container_dev>
# put <container_dev> into your printer.cfg
devices:
# - /dev/ttyACM0:/dev/ttyACM0
- /dev/spidev0.0:/dev/spidev0.0
- /dev/gpiomem:/dev/gpiomem
- /dev/gpiochip0:/dev/gpiochip0
as you can see I even tried privileged mode, mounting /dev directly but still I get that same error
Do you have any tips ? since you provide a specific docker-compose file for adxl345 I guess you succeed to use it ?
The text was updated successfully, but these errors were encountered:
Hello, firstly thank you for this amazing repo
I'm trying to use adxl345 to configure inputshaper
i'm using a rpi4, latest docker image (even tried next tag and building manually)
My adxl345 unit is working properly, I tested spi mode using another software on the same rpi
First issue I got is
as a workaround I manually installed numpy in the venv directly in the container.
Then I get this error
I put klipper's recommended configuration like this
I also tried multiple docker-compose config, using what you did in you adxl345 variant. Currently I have
as you can see I even tried privileged mode, mounting /dev directly but still I get that same error
Do you have any tips ? since you provide a specific docker-compose file for adxl345 I guess you succeed to use it ?
The text was updated successfully, but these errors were encountered: