Name	Name	Last commit message	Last commit date
parent directory ..
config.h	config.h
manna-harbour_miryoku.c	manna-harbour_miryoku.c
manna-harbour_miryoku.h	manna-harbour_miryoku.h
readme.org	readme.org
rules.mk	rules.mk

Miryoku QMK

Miryoku is an ergonomic, minimal, orthogonal, and universal keyboard layout. This is the Miryoku implementation for QMK.

Branches

QMK master

Miryoku QMK is periodically merged upstream into QMK master and it is generally recommended to build directly from QMK master.

QMK master is at https://github.com/qmk/qmk_firmware/tree/master, and the corresponding Miryoku QMK readme is at https://github.com/qmk/qmk_firmware/tree/master/users/manna-harbour_miryoku.

Miryoku QMK development branch

The Miryoku QMK development branch is miryoku and may contain new commits not yet merged into QMK master.

miryoku is at https://github.com/manna-harbour/miryoku_qmk/tree/miryoku, and the corresponding Miryoku QMK readme is at https://github.com/manna-harbour/miryoku_qmk/tree/miryoku/users/manna-harbour_miryoku.

New commits can be seen at the top of the history with commit messages beginning [miryoku]. After the new commits are squashed and merged upstream into QMK master by pull request the miryoku branch is renamed and a new miryoku branch is created from QMK master.

To checkout the miryoku branch in your existing QMK build environment:

git remote add miryoku_qmk [email protected]:manna-harbour/miryoku_qmk.git # if using SSH
git remote add miryoku_qmk https://github.com/manna-harbour/miryoku_qmk.git # if using HTTPS
git fetch miryoku_qmk
git checkout --track miryoku_qmk/miryoku

Layout

General Principles

Use layers instead of reaching.
Use both hands instead of contortions.
Use the home positions as much as possible.
Make full use of the thumbs.
Avoid unnecessary complication.

Details

5 columns, 3 rows, 3 thumb keys, 2 hands.
Can be used on almost any split or non-split ergo or ortho keyboard.
Includes all keys found on a US layout TKL keyboard, plus media keys and mouse emulation.
Home row is the middle row, home thumb key is the middle thumb key.
Maximum 1-u movement from home position for fingers and thumbs, and only along one axis (except for the inner index finger column which is deprioritised compared with the home columns).
Dual-function modifiers on home row, mirrored on both hands.
Dual-function layer change on thumbs.
Layers are designed orthogonally with a single purpose per hand and are accessed by holding a thumb key on the opposite hand.
All layers on the same hand are based on the same basic key arrangement.
Holding layer change and modifiers on one hand combined with a single key press on the other hand can produce any combination of modifiers and single keys without any finger contortions.
Single function mods are also defined on layers on the same hand as the layer change thumb key so layer change and mods can be held in any order or simultaneously without race conditions.
As mods are only enabled on the opposite hand, auto-repeat is available on the home row on layers for use with cursor and mouse keys.
Tap-hold auto-repeat is disabled to permit faster tap-hold switching on thumbs, but thumb tap keys are mirrored onto some layers for use with auto-repeat. On other layers thumb keys are redefined with important functions for that layer.
Auto Shift for numbers and symbols.

Layers

The layers are maintained in tables. U_NP indicates the key is not present and is used to fill in the table around the thumb keys. The grid arrangement of the tables does not imply a particular physical layout.

Basic keycodes are entered without the KC_ prefix. Symbols can be entered as-is, except for ‘-’ (MINS), ‘.’ (DOT), ‘|’ (PIPE), and ‘”’ (DQUO). Empty cells are unused.

The base layer is maintained as separate tables for tap alphas, tap thumbs, and hold. Other layers are specified as a single hand including thumbs. Tables are combined to produce the keymap for each layer.

Mods (and reset) will be available on sub layers on the same hand as the layer change thumb key. Unknown names are considered to be layer names.

Base

The base layer alphas are Colemak Mod-DH. Dot, comma, slash, and apostrophe are included with the alphas. The primary, secondary, and tertiary thumb keys are backspace, enter, delete on the right and space, tab, escape on the left.

Alternative alpha arrangements are also available.

Tap

Alphas

Q	W	F	P	B	J	L	U	Y	’
A	R	S	T	G	M	N	E	I	O
Z	X	C	D	V	K	H	,	DOT	/

Thumbs

U_NP

ESC

SPC

TAB

ENT

BSPC

DEL

U_NP

Hold

RESET									RESET
LGUI	LALT	LCTL	LSFT			LSFT	LCTL	LALT	LGUI
BUTTON	ALGR							ALGR	BUTTON
U_NP	U_NP	MEDIA	NAV	MOUSE	SYM	NUM	FUN	U_NP	U_NP

Nav

Primary right-hand layer (left home thumb) is navigation and editing. Cursor keys are on the home position, line and page movement below, clipboard above, caps lock and insert on the inner column. Thumb keys are duplicated from the base layer to avoid having to layer change mid edit and to enable auto-repeat.

Alternative clipboard key mappings and navigation key arrangements are available.

U_RDO	U_PST	U_CPY	U_CUT	U_UND
CAPS	LEFT	DOWN	UP	RGHT
INS	HOME	PGDN	PGUP	END
ENT	BSPC	DEL	U_NP	U_NP

Mouse

Secondary right-hand layer is mouse emulation. Mouse movement mirrors cursor navigation on home and wheel mirrors line / page movement below. Buttons are on the thumbs (L, M, R). Mouse movement, click, and drag, with modifiers, can be performed from the home position. Clipboard keys are duplicated from the Nav layer.

U_RDO	U_PST	U_CPY	U_CUT	U_UND
	MS_L	MS_D	MS_U	MS_R
	WH_L	WH_D	WH_U	WH_R
BTN1	BTN3	BTN2	U_NP	U_NP

Button

Provides mouse buttons, mods, and clipboard keys for use with integrated or external pointing devices, used with either hand. The layer is available for automatic activation depending on hardware and configuration. It can also be activated manually by holding a bottom row pinkie key (however GUI and Undo will be unavailable).

U_UND	U_CUT	U_CPY	U_PST	U_RDO	U_RDO	U_PST	U_CPY	U_CUT	U_UND
LGUI	LALT	LCTL	LSFT			LSFT	LCTL	LALT	LGUI
U_UND	U_CUT	U_CPY	U_PST	U_RDO	U_RDO	U_PST	U_CPY	U_CUT	U_UND
U_NP	U_NP	BTN2	BTN3	BTN1	BTN1	BTN3	BTN2	U_NP	U_NP

Media

Tertiary right-hand layer is media control, with volume up / down and next / prev mirroring the navigation keys. Pause, stop and mute are on thumbs. RGB control is on the top row (combine with shift to invert). Unused keys are available for other related functions.

RGB_TOG	RGB_MOD	RGB_HUI	RGB_SAI	RGB_VAI
	MPRV	VOLD	VOLU	MNXT

MSTP	MPLY	MUTE	U_NP	U_NP

Num

Primary left-hand layer (right home thumb) is numerals and symbols. Numerals are in the standard numpad locations with symbols in the remaining positions. Dot is duplicated from the base layer.

[	7	8	9	]
;	4	5	6	=
`	1	2	3	\
U_NP	U_NP	DOT	0	MINS

Sym

Secondary left-hand layer has shifted symbols in the same locations to reduce chording when using mods with shifted symbols. Open parenthesis is duplicated next to close parenthesis.

{	&	*	(	}
:	$	%	^	+
~	!	@	#	PIPE
U_NP	U_NP	(	)	_

Fun

Tertiary left-hand layer has function keys mirroring the numerals on the primary layer with extras on the pinkie column, plus system keys on the inner column. App (menu) is on the tertiary thumb key and other thumb keys are duplicated from the base layer to enable auto-repeat.

F12	F7	F8	F9	PSCR
F11	F4	F5	F6	SLCK
F10	F1	F2	F3	PAUS
U_NP	U_NP	APP	SPC	TAB

Alternative Layouts

The defaults are recommended, but alternative layouts are provided to accommodate existing muscle memory and platform differences.

Alphas

To select, append the corresponding option to the make command line when building, e.g. MIRYOKU_ALPHAS=QWERTY.

AZERTY

MIRYOKU_ALPHAS=AZERTY

A	Z	E	R	T	Y	U	I	O	P
Q	S	D	F	G	H	J	K	L	M
W	X	C	V	B	N	,	DOT	/	’

Colemak

MIRYOKU_ALPHAS=COLEMAK

Q	W	F	P	G	J	L	U	Y	’
A	R	S	T	D	H	N	E	I	O
Z	X	C	V	B	K	M	,	DOT	/

Colemak Mod-DHk

MIRYOKU_ALPHAS=COLEMAKDHK

Q	W	F	P	B	J	L	U	Y	’
A	R	S	T	G	K	N	E	I	O
Z	X	C	D	V	M	H	,	DOT	/

Dvorak

MIRYOKU_ALPHAS=DVORAK

‘	,	DOT	P	Y	F	G	C	R	L
A	O	E	U	I	D	H	T	N	S
/	Q	J	K	X	B	M	W	V	Z

Halmak

MIRYOKU_ALPHAS=HALMAK

W	L	R	B	Z	’	Q	U	D	J
S	H	N	T	,	DOT	A	E	O	I
F	M	V	C	/	G	P	X	K	Y

Workman

MIRYOKU_ALPHAS=WORKMAN

Q	D	R	W	B	J	F	U	P	’
A	S	H	T	G	Y	N	E	O	I
Z	X	M	C	V	K	L	,	DOT	/

QWERTY

MIRYOKU_ALPHAS=QWERTY

Q	W	E	R	T	Y	U	I	O	P
A	S	D	F	G	H	J	K	L	’
Z	X	C	V	B	N	M	,	DOT	/

QWERTZ

MIRYOKU_ALPHAS=QWERTZ

Q	W	E	R	T	Z	U	I	O	P
A	S	D	F	G	H	J	K	L	’
Y	X	C	V	B	N	M	,	DOT	/

Nav

vi-Style

To select, append MIRYOKU_NAV=VI to the make command line when building. Not available with MIRYOKU_LAYERS=FLIP.

Nav

U_RDO	U_PST	U_CPY	U_CUT	U_UND
LEFT	DOWN	UP	RGHT	CAPS
HOME	PGDN	PGUP	END	INS
ENT	BSPC	DEL	U_NP	U_NP

Mouse

U_RDO	U_PST	U_CPY	U_CUT	U_UND
MS_L	MS_D	MS_U	MS_R
WH_L	WH_D	WH_U	WH_R
BTN1	BTN3	BTN2	U_NP	U_NP

Media

RGB_TOG	RGB_MOD	RGB_HUI	RGB_SAI	RGB_VAI
MPRV	VOLD	VOLU	MNXT

MSTP	MPLY	MUTE	U_NP	U_NP

Inverted-T

To select, append MIRYOKU_NAV=INVERTEDT to the make command line when building. Only available with MIRYOKU_LAYERS=FLIP.

Nav

PGUP	HOME	UP	END	INS
PGDN	LEFT	DOWN	RGHT	CAPS
U_UND	U_CUT	U_CPY	U_PST	U_RDO
U_NP	U_NP	DEL	BSPC	ENT

Mouse

WH_U	WH_L	MS_U	WH_R
WH_D	MS_L	MS_D	MS_R
U_UND	U_CUT	U_CPY	U_PST	U_RDO
U_NP	U_NP	BTN2	BTN3	BTN1

Media

		VOLU
	MPRV	VOLD	MNXT
RGB_MOD	RGB_HUI	RGB_SAI	RGB_VAI	RGB_TOG
U_NP	U_NP	MUTE	MPLY	MSTP

Clipboard

Keycodes are translated according to the following tables.

By default, the main clipboard keys (cut, copy, and paste) use the CUA bindings and should work in general unix and windows applications, emacs, and terminal emulators. The additional keys (undo, redo) usually require rebinding in the application.

To select, append the corresponding option to the make command line when building, e.g. MIRYOKU_CLIPBOARD=WIN.

Default

U_RDO	AGIN
U_PST	S(KC_INS)
U_CPY	C(KC_INS)
U_CUT	S(KC_DEL)
U_UND	UNDO

Fun Cluster

MIRYOKU_CLIPBOARD=FUN

U_RDO	AGIN
U_PST	PSTE
U_CPY	COPY
U_CUT	CUT
U_UND	UNDO

Mac

MIRYOKU_CLIPBOARD=MAC

U_RDO	SCMD(KC_Z)
U_PST	LCMD(KC_V)
U_CPY	LCMD(KC_C)
U_CUT	LCMD(KC_X)
U_UND	LCMD(KC_Z)

Windows

MIRYOKU_CLIPBOARD=WIN

U_RDO	C(KC_Y)
U_PST	C(KC_V)
U_CPY	C(KC_C)
U_CUT	C(KC_X)
U_UND	C(KC_Z)

Layers

Flip

Flip base layer thumb keys and sub layers between right and left hands.

To select, append MIRYOKU_LAYERS=FLIP to the make command line when building.

Thumbs

U_NP

DEL

BSPC

ENT

TAB

SPC

ESC

U_NP

Hold

RESET									RESET
LGUI	LALT	LCTL	LSFT			LSFT	LCTL	LALT	LGUI
BUTTON	ALGR							ALGR	BUTTON
U_NP	U_NP	FUN	NUM	SYM	MOUSE	NAV	MEDIA	U_NP	U_NP

Nav

HOME	PGDN	PGUP	END	INS
LEFT	DOWN	UP	RGHT	CAPS
U_UND	U_CUT	U_CPY	U_PST	U_RDO
U_NP	U_NP	DEL	BSPC	ENT

Mouse

WH_L	WH_D	WH_U	WH_R
MS_L	MS_D	MS_U	MS_R
U_UND	U_CUT	U_CPY	U_PST	U_RDO
U_NP	U_NP	BTN2	BTN3	BTN1

Media

RGB_MOD	RGB_HUI	RGB_SAI	RGB_VAI	RGB_TOG
MPRV	VOLD	VOLU	MNXT

U_NP	U_NP	MUTE	MPLY	MSTP

Num

[	7	8	9	]
=	4	5	6	;
\	1	2	3	`
MINS	0	DOT	U_NP	U_NP

Sym

{	&	*	(	}
+	$	%	^	:
PIPE	!	@	#	~
_	(	)	U_NP	U_NP

Fun

PSCR	F7	F8	F9	F12
SLCK	F4	F5	F6	F11
PAUS	F1	F2	F3	F10
TAB	SPC	APP	U_NP	U_NP

Code Generation

The layout is maintained in emacs org-mode tables and converted to QMK keymap data structures using embedded python scripts.

Table Conversion Scripts

table-layout-taphold

Produce base layer from separate tap and hold tables.

width = 19
mods_dict = dict.fromkeys(mods_table[0])
nonkc_tuple = tuple(nonkc_table[0])
symbol_names_dict = {}
for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
  symbol_names_dict[symbol] = name
  symbol_names_dict[shifted_symbol] = shifted_name
results = ''
for tap_row, hold_row in zip(alphas_table + thumbs_table, hold_table):
  results += '    '
  for tap, hold in zip(tap_row, hold_row):
    if tap == '':
      code = 'U_NU'
    elif tap in symbol_names_dict:
      code = symbol_names_dict[tap]
    else:
      code = tap
    if not str(code).startswith(nonkc_tuple):
      code = 'KC_' + str(code)
    if hold in mods_dict:
      code = str(hold) + '_T(' + code + ')'
    elif hold != '' and hold != 'U_NP' and hold != 'RESET':
      code = 'LT(' + str(hold) + ', ' + code + ')'
    results += (code + ', ').ljust(width)
  results = results.rstrip(' ') + '\n'
results = results.rstrip('\n, ')
return results

table-layout-half

Produce sub layers given layer name and corresponding table for single hand and incorporating mods and reset from base layer. Layer names must end with ‘R’ or ‘L’. A layer with shifted symbols can also be generated.

width = 9
mods_dict = dict.fromkeys(mods_table[0])
nonkc_tuple = tuple(nonkc_table[0])
symbol_names_dict = {}
shifted_symbol_names_dict = {}
for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
  symbol_names_dict[symbol] = name
  symbol_names_dict[shifted_symbol] = shifted_name
  shifted_symbol_names_dict[symbol] = shifted_name
length = len(half_table[0])
results = ''
for half_row, hold_row in zip(half_table, hold_table):
  results += '    '
  hold_row_l, hold_row_r = hold_row[:length], hold_row[length:]
  for lr, hold_row_lr in ('l', hold_row_l), ('r', hold_row_r):
    if lr == mode:
      for half in half_row:
        if half == '':
          code = 'U_NU'
        elif shift == "true" and half in shifted_symbol_names_dict:
          code = shifted_symbol_names_dict[half]
        elif half in symbol_names_dict:
          code = symbol_names_dict[half]
        else:
          code = half
        if not str(code).startswith(nonkc_tuple):
          code = 'KC_' + str(code)
        results += (str(code) + ', ').ljust(width)
    else:
      for hold in hold_row_lr:
        if hold == '' or hold != 'U_NP' and hold != 'RESET' and hold not in mods_dict:
          code = 'U_NA'
        else:
          code = hold
        if not str(code).startswith(nonkc_tuple):
          code = 'KC_' + str(code)
        results += (str(code) + ', ').ljust(width)
  results = results.rstrip(' ') + '\n'
results = results.rstrip('\n, ')
return results

table-layout-full

Produce full layer from single table. Fill for unused keys is configurable.

width = 9
symbol_names_dict = {}
nonkc_tuple = tuple(nonkc_table[0])
for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
  symbol_names_dict[symbol] = name
  symbol_names_dict[shifted_symbol] = shifted_name
results = ''
for row in table:
  results += '    '
  for key in row:
    if key == '':
      code = fill
    elif key in symbol_names_dict:
      code = symbol_names_dict[key]
    else:
      code = key
    if not str(code).startswith(nonkc_tuple):
      code = 'KC_' + str(code)
    results += (code + ', ').ljust(width)
  results = results.rstrip(' ') + '\n'
results = results.rstrip('\n, ')
return results

table-enums

Produce layer enums from layer names in hold table.

mods_dict = dict.fromkeys(mods_table[0])
layers = [ 'BASE', 'BUTTON' ]
for hold_row in hold_table:
  for hold in hold_row:
    if hold not in mods_dict and hold != '' and hold != 'U_NP' and hold != 'RESET' and hold not in layers:
      layers.append(hold)
results = 'enum layers { ' + ', '.join(layers) + ' };'
return results

table-keycode-mappings

Produce keycode mappings according to the provided table.

nonkc_tuple = tuple(nonkc_table[0])
symbol_names_dict = {}
for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
  symbol_names_dict[symbol] = name
  symbol_names_dict[shifted_symbol] = shifted_name
results = ''
for f,t in table:
  if t == '':
    code = 'U_NU'
  elif t in symbol_names_dict:
    code = symbol_names_dict[t]
  else:
    code = t
  if not str(code).startswith(nonkc_tuple):
    code = 'KC_' + str(code)
  results += '#define ' + f + ' ' + code + '\n'
return results

Data

symbol-names

Symbol, name, and shifted symbol mappings for use in tables.

`	GRV	~	TILD
”-”	MINS	_	UNDS
=	EQL	+	PLUS
[	LBRC	{	LCBR
]	RBRC	}	RCBR
\	BSLS	PIPE	PIPE
;	SCLN	:	COLN
‘	QUOT	DQUO	DQUO
,	COMM	<	LT
”.”	DOT	>	GT
/	SLSH	?	QUES
1	1	!	EXLM
2	2	@	AT
3	3	#	HASH
4	4	$	DLR
5	5	%	PERC
6	6	^	CIRC
7	7	&	AMPR
8	8	*	ASTR
9	9	(	LPRN
0	0	)	RPRN

mods

Modifiers usable in hold table. Need to have the same name for KC_ and _T versions.

LSFT

LCTL

LALT

LGUI

ALGR

nonkc

Keycodes that match any of these prefixes will not have KC_ automatically prepended.

RGB_

RESET

SCMD(

LCMD(

header

Header for tangled files.

Copyright 2019 Manna Harbour
https://github.com/manna-harbour/miryoku
generated -*- buffer-read-only: t -*-

license-qmk

License for tangled QMK C source files.

// This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

Subset Mapping

The keymap, build options, and configuration are shared between keyboards. The layout is mapped onto keyboards with different physical layouts as a subset without code duplication using the QMK userspace feature and C macros.

Userspace

The keymap is defined for LAYOUT_miryoku which is 10x4, with the outer 2 positions on the bottom row unused and the rest of the bottom row being the thumb keys.

users/manna-harbour_miryoku/rules.mk

Build options. Automatically included.

# <<header>>

MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
AUTO_SHIFT_ENABLE = yes # Auto Shift

SRC += manna-harbour_miryoku.c # keymap

# alternative layouts:

# alphas
ifneq ($(strip $(MIRYOKU_ALPHAS)),)
  OPT_DEFS += -DMIRYOKU_ALPHAS_$(MIRYOKU_ALPHAS)
endif

# nav
ifneq ($(strip $(MIRYOKU_NAV)),)
  OPT_DEFS += -DMIRYOKU_NAV_$(MIRYOKU_NAV)
endif

# clipboard
ifneq ($(strip $(MIRYOKU_CLIPBOARD)),)
  OPT_DEFS += -DMIRYOKU_CLIPBOARD_$(MIRYOKU_CLIPBOARD)
endif

# layers
ifneq ($(strip $(MIRYOKU_LAYERS)),)
  OPT_DEFS += -DMIRYOKU_LAYERS_$(MIRYOKU_LAYERS)
endif

# subset mappings
ifneq ($(strip $(MIRYOKU_MAPPING)),)
  OPT_DEFS += -DMIRYOKU_MAPPING_$(MIRYOKU_MAPPING)
endif

users/manna-harbour_miryoku/config.h

Config options. Automatically included.

// <<header>>

<<license-qmk>>

#pragma once

// default but used in macros
#undef TAPPING_TERM
#define TAPPING_TERM 200

// Prevent normal rollover on alphas from accidentally triggering mods.
#define IGNORE_MOD_TAP_INTERRUPT

// Enable rapid switch from tap to hold, disables double tap hold auto-repeat.
#define TAPPING_FORCE_HOLD

// Auto Shift
#define NO_AUTO_SHIFT_ALPHA
#define AUTO_SHIFT_TIMEOUT TAPPING_TERM
#define AUTO_SHIFT_NO_SETUP

// Recommended for heavy chording.
#define QMK_KEYS_PER_SCAN 4

// Mouse key speed and acceleration.
#undef MOUSEKEY_DELAY
#define MOUSEKEY_DELAY          0
#undef MOUSEKEY_INTERVAL
#define MOUSEKEY_INTERVAL       16
#undef MOUSEKEY_WHEEL_DELAY
#define MOUSEKEY_WHEEL_DELAY    0
#undef MOUSEKEY_MAX_SPEED
#define MOUSEKEY_MAX_SPEED      6
#undef MOUSEKEY_TIME_TO_MAX
#define MOUSEKEY_TIME_TO_MAX    64

users/manna-harbour_miryoku/manna-harbour_miryoku.h

Keymap-related definitions. Included from manna-harbour_miryoku.c. Can be included from keymap or layout keymap.c if needed.

// <<header>>

<<license-qmk>>

#pragma once

#include QMK_KEYBOARD_H

#define U_NP KC_NO // key is not present
#define U_NA KC_NO // present but not available for use
#define U_NU KC_NO // available but not used

<<table-enums()>>

#if defined MIRYOKU_CLIPBOARD_FUN
<<table-keycode-mappings(table=clipboard-fun)>>
#elif defined MIRYOKU_CLIPBOARD_MAC
<<table-keycode-mappings(table=clipboard-mac)>>
#elif defined MIRYOKU_CLIPBOARD_WIN
<<table-keycode-mappings(table=clipboard-win)>>
#else
<<table-keycode-mappings(table=clipboard)>>
#endif

users/manna-harbour_miryoku/manna-harbour_miryoku.c

Contains the keymap. Added from rules.mk.

// <<header>>

<<license-qmk>>

#include "manna-harbour_miryoku.h"

const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
#if defined MIRYOKU_LAYERS_FLIP
  [BASE] = LAYOUT_miryoku(
  #if defined MIRYOKU_ALPHAS_AZERTY
<<table-layout-taphold(alphas_table=azerty, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_COLEMAK
<<table-layout-taphold(alphas_table=colemak, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_COLEMAKDHK
<<table-layout-taphold(alphas_table=colemakdhk, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_DVORAK
<<table-layout-taphold(alphas_table=dvorak, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_HALMAK
<<table-layout-taphold(alphas_table=halmak, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_WORKMAN
<<table-layout-taphold(alphas_table=workman, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_QWERTY
<<table-layout-taphold(alphas_table=qwerty, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_QWERTZ
<<table-layout-taphold(alphas_table=qwertz, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #else
<<table-layout-taphold(alphas_table=colemakdh, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #endif
  ),
  #if defined MIRYOKU_NAV_INVERTEDT
  [NAV] = LAYOUT_miryoku(
<<table-layout-half(half_table=nav-l-invertedt, mode="l", hold_table=hold-flip)>>
  ),
  [MOUSE] = LAYOUT_miryoku(
<<table-layout-half(half_table=mouse-l-invertedt, mode="l", hold_table=hold-flip)>>
  ),
  [MEDIA] = LAYOUT_miryoku(
<<table-layout-half(half_table=media-l-invertedt, mode="l", hold_table=hold-flip)>>
  ),
  #else
  [NAV] = LAYOUT_miryoku(
<<table-layout-half(half_table=nav-l, mode="l", hold_table=hold-flip)>>
  ),
  [MOUSE] = LAYOUT_miryoku(
<<table-layout-half(half_table=mouse-l, mode="l", hold_table=hold-flip)>>
  ),
  [MEDIA] = LAYOUT_miryoku(
<<table-layout-half(half_table=media-l, mode="l", hold_table=hold-flip)>>
  ),
  #endif
  [NUM] = LAYOUT_miryoku(
<<table-layout-half(half_table=num-r, mode="r", hold_table=hold-flip)>>
  ),
  [SYM] = LAYOUT_miryoku(
<<table-layout-half(half_table=sym-r, mode="r", hold_table=hold-flip)>>
  ),
  [FUN] = LAYOUT_miryoku(
<<table-layout-half(half_table=fun-r, mode="r", hold_table=hold-flip)>>
  ),
#else
  [BASE] = LAYOUT_miryoku(
  #if defined MIRYOKU_ALPHAS_AZERTY
<<table-layout-taphold(alphas_table=azerty)>>
  #elif defined MIRYOKU_ALPHAS_COLEMAK
<<table-layout-taphold(alphas_table=colemak)>>
  #elif defined MIRYOKU_ALPHAS_COLEMAKDHK
<<table-layout-taphold(alphas_table=colemakdhk)>>
  #elif defined MIRYOKU_ALPHAS_DVORAK
<<table-layout-taphold(alphas_table=dvorak)>>
  #elif defined MIRYOKU_ALPHAS_HALMAK
<<table-layout-taphold(alphas_table=halmak)>>
  #elif defined MIRYOKU_ALPHAS_WORKMAN
<<table-layout-taphold(alphas_table=workman)>>
  #elif defined MIRYOKU_ALPHAS_QWERTY
<<table-layout-taphold(alphas_table=qwerty)>>
  #elif defined MIRYOKU_ALPHAS_QWERTZ
<<table-layout-taphold(alphas_table=qwertz)>>
  #else
<<table-layout-taphold(alphas_table=colemakdh)>>
  #endif
  ),
  #if defined MIRYOKU_NAV_VI
  [NAV] = LAYOUT_miryoku(
<<table-layout-half(half_table=nav-r-vi, mode="r")>>
  ),
  [MOUSE] = LAYOUT_miryoku(
<<table-layout-half(half_table=mouse-r-vi, mode="r")>>
  ),
  [MEDIA] = LAYOUT_miryoku(
<<table-layout-half(half_table=media-r-vi, mode="r")>>
  ),
  #else
  [NAV] = LAYOUT_miryoku(
<<table-layout-half(half_table=nav-r, mode="r")>>
  ),
  [MOUSE] = LAYOUT_miryoku(
<<table-layout-half(half_table=mouse-r, mode="r")>>
  ),
  [MEDIA] = LAYOUT_miryoku(
<<table-layout-half(half_table=media-r, mode="r")>>
  ),
  #endif
  [NUM] = LAYOUT_miryoku(
<<table-layout-half(half_table=num-l, mode="l")>>
  ),
  [SYM] = LAYOUT_miryoku(
<<table-layout-half(half_table=sym-l, mode="l")>>
  ),
  [FUN] = LAYOUT_miryoku(
<<table-layout-half(half_table=fun-l, mode="l")>>
  ),
#endif
  [BUTTON] = LAYOUT_miryoku(
<<table-layout-full(table=button)>>
  )
};

Layouts

To use the keymap on a keyboard supporting the layouts feature, LAYOUT_miryoku is defined as a macro mapping onto the layout’s own LAYOUT macro, leaving the unused keys as KC_NO.

For keyboards supporting multiple layouts for which subset mappings are available, select the layout with FORCE_LAYOUT in the make command line when building. E.g.:

make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=planck_mit # planck_mit
make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=ortho_4x12 # ortho_4x12

60_ansi

An angled ortho split layout is mapped onto the row-staggered keyboard. The rows are moved up to better position the thumb keys, the hands are separated as much as possible, and the left hand column angle is reversed to reduce ulnar deviation of the wrists.

An alternative subset mapping is also provided without reverse column angle. To select this mapping, append MIRYOKU_MAPPING=NOREVERSEANGLE to the make command line when building.

Another alternative subset mapping is provided mapping only the 3x10 alphas, plus spacebar for space / Nav, with the remainder being the default 60_ansi keymap with semicolon in place of quote. To select this mapping, append MIRYOKU_MAPPING=LITE to the make command line when building.

Keyboards supporting this layout: alps64, amj60, bakeneko60, bm60poker, bm60rgb, do60, dp60, dz60, facew, gskt00, infinity60, jm60, kc60, kc60se, ok60, org60, paladin64, panc60, reviung61, smk60, v60_type_r, yd60mq, 1upkeyboards/1up60hse, 1upkeyboards/1up60rgb, 40percentclub/luddite, acheron/keebspcb, acheron/lasgweloth, ai03/polaris, akegata_denki/device_one, atxkb/1894, bioi/g60ble, bt66tech/bt66tech60, cannonkeys/an_c, cannonkeys/instant60, cannonkeys/practice60, clawsome/coupe, dm9records/tartan, duck/eagle_viper, evyd13/plain60, exclusive/e6_rgb, gh60/revc, gh60/satan, gh60/v1p3, handwired/xealousbrown, hineybush/h60, hs60/v1, keebio/wtf60, noxary/260, playkbtw/pk60, ryloo_studio/m0110, thevankeyboards/bananasplit, wilba_tech/zeal60, xd60/rev2, xd60/rev3, cannonkeys/db60/hotswap, cannonkeys/db60/j02, cannonkeys/db60/rev2, exclusive/e6v2/le, exclusive/e6v2/oe, foxlab/leaf60/universal, handwired/co60/rev1, handwired/co60/rev7, handwired/swiftrax/nodu, hs60/v2/ansi, inett_studio/sqx/universal, melgeek/mj61/rev1, melgeek/mj61/rev2, melgeek/mj63/rev1, melgeek/mj63/rev2, sentraq/s60_x/default, sentraq/s60_x/rgb.

Example build command lines:

make dz60:manna-harbour_miryoku:flash # dz60
make dz60:manna-harbour_miryoku:flash MIRYOKU_MAPPING=NOREVERSEANGLE  # dz60, without reverse column angle
make dz60:manna-harbour_miryoku:flash MIRYOKU_MAPPING=LITE  # dz60, with lite mapping

layouts/community/60_ansi/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#if defined MIRYOKU_MAPPING_NOREVERSEANGLE
  #define LAYOUT_miryoku(\
K00,  K01,  K02,  K03,  K04,                    K05,  K06,  K07,  K08,  K09,\
K10,  K11,  K12,  K13,  K14,                    K15,  K16,  K17,  K18,  K19,\
K20,  K21,  K22,  K23,  K24,                    K25,  K26,  K27,  K28,  K29,\
N30,  N31,  K32,  K33,  K34,                    K35,  K36,  K37,  N38,  N39\
)\
LAYOUT_60_ansi(\
K00,  K01,  K02,  K03,  K04,  XXX,  XXX,  XXX,  K05,  K06,  K07,  K08,  K09,  XXX,\
   K10,  K11,  K12,  K13,  K14,  XXX,  XXX,  XXX,  K15,  K16,  K17,  K18,  K19,  XXX,\
     K20,  K21,  K22,  K23,  K24,  XXX,  XXX,  XXX,  K25,  K26,  K27,  K28,  K29,\
  XXX,        K32,  K33,  K34,  XXX,  XXX,  XXX,  XXX,  K35,  K36,  K37,  XXX,\
  XXX,  XXX,  XXX,              XXX,              XXX,  XXX,        XXX,  XXX\
)
#elif defined MIRYOKU_MAPPING_LITE
  #if defined MIRYOKU_LAYERS_FLIP
    #define LAYOUT_miryoku( \
         K00,     K01,     K02,     K03,     K04,     K05,     K06,     K07,     K08,     K09, \
         K10,     K11,     K12,     K13,     K14,     K15,     K16,     K17,     K18,     K19, \
         K20,     K21,     K22,     K23,     K24,     K25,     K26,     K27,     K28,     K29, \
         N30,     N31,     K32,     K33,     K34,     K35,     K36,     K37,     N38,     N39 \
) \
LAYOUT_60_ansi( \
KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
KC_TAB,  K00,     K01,     K02,     K03,     K04,     K05,     K06,     K07,     K08,     K09,     KC_LBRC, KC_RBRC, KC_BSLS, \
KC_CAPS, K10,     K11,     K12,     K13,     K14,     K15,     K16,     K17,     K18,     K19,     KC_SCLN, KC_ENT, \
KC_LSFT, K20,     K21,     K22,     K23,     K24,     K25,     K26,     K27,     K28,     K29,     KC_RSFT, \
KC_LCTL, KC_LGUI, KC_LALT,                            K36,                                KC_RALT, KC_RGUI, KC_APP,  KC_RCTL \
)
  #else
    #define LAYOUT_miryoku( \
         K00,     K01,     K02,     K03,     K04,     K05,     K06,     K07,     K08,     K09, \
         K10,     K11,     K12,     K13,     K14,     K15,     K16,     K17,     K18,     K19, \
         K20,     K21,     K22,     K23,     K24,     K25,     K26,     K27,     K28,     K29, \
         N30,     N31,     K32,     K33,     K34,     K35,     K36,     K37,     N38,     N39 \
) \
LAYOUT_60_ansi( \
KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
KC_TAB,  K00,     K01,     K02,     K03,     K04,     K05,     K06,     K07,     K08,     K09,     KC_LBRC, KC_RBRC, KC_BSLS, \
KC_CAPS, K10,     K11,     K12,     K13,     K14,     K15,     K16,     K17,     K18,     K19,     KC_SCLN, KC_ENT, \
KC_LSFT, K20,     K21,     K22,     K23,     K24,     K25,     K26,     K27,     K28,     K29,     KC_RSFT, \
KC_LCTL, KC_LGUI, KC_LALT,                            K33,                                         KC_RALT, KC_RGUI, KC_APP,  KC_RCTL \
)
  #endif
#else
  #define LAYOUT_miryoku(\
            K00,  K01,  K02,  K03,  K04,        K05,  K06,  K07,  K08,  K09,\
            K10,  K11,  K12,  K13,  K14,        K15,  K16,  K17,  K18,  K19,\
            K20,  K21,  K22,  K23,  K24,        K25,  K26,  K27,  K28,  K29,\
            N30,  N31,  K32,  K33,  K34,        K35,  K36,  K37,  N38,  N39\
)\
LAYOUT_60_ansi(\
XXX,  XXX,  K00,  K01,  K02,  K03,  K04,  XXX,  K05,  K06,  K07,  K08,  K09,  XXX,\
   XXX,  K10,  K11,  K12,  K13,  K14,  XXX,  XXX,  K15,  K16,  K17,  K18,  K19,  XXX,\
     K20,  K21,  K22,  K23,  K24,  XXX,  XXX,  XXX,  K25,  K26,  K27,  K28,  K29,\
  XXX,        XXX,  K32,  K33,  K34,  XXX,  XXX,  XXX,  K35,  K36,  K37,  XXX,\
  XXX,  XXX,  XXX,              XXX,              XXX,  XXX,        XXX,  XXX\
)
#endif

layouts/community/60_ansi/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

ergodox

For the ergodox layout, the main 5x3 alphas are used as usual. The primary and secondary thumb keys are the inner and outer 2u thumb keys and the tertiary thumb key is the innermost key of the partial bottom row. The remaining keys are unused.

Keyboards supporting this layout: ergodone, ergodox_ez, ergodox_infinity, hotdox.

Example build command lines:

make ergodox_infinity:manna-harbour_miryoku:flash # ergodox_infinity
make ergodox_ez:manna-harbour_miryoku:flash # ergodox_ez

layouts/community/ergodox/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39\
)\
LAYOUT_ergodox_pretty(\
XXX, XXX, XXX, XXX, XXX, XXX, XXX,      XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
XXX, K00, K01, K02, K03, K04, XXX,      XXX, K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24, XXX,      XXX, K25, K26, K27, K28, K29, XXX,\
XXX, XXX, XXX, XXX, K32,                          K37, XXX, XXX, XXX, XXX,\
                         XXX, XXX,      XXX, XXX,\
                              XXX,      XXX,\
                    K33, K34, XXX,      XXX, K35, K36\
)

layouts/community/ergodox/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

ortho_4x10

An alternative with 180 degree rotation is also provided to enable the USB cable to be relocated for use with laptops. To select this mapping, append MIRYOKU_MAPPING=ROTATE to the make command line when building.

Keyboards supporting this layout: newgame40, nimrod, marksard/rhymestone, pabile/p40.

Example build command lines:

make marksard/rhymestone:manna-harbour_miryoku:flash # marksard/rhymestone
make pabile/p40:manna-harbour_miryoku:flash MIRYOKU_MAPPING=ROTATE # pabile/p40, rotate

layouts/community/ortho_4x10/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#if defined MIRYOKU_MAPPING_ROTATE
#define LAYOUT_miryoku( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
) \
LAYOUT_ortho_4x10( \
XXX, XXX, K37, K36, K35, K34, K33, K32, XXX, XXX, \
K29, K28, K27, K26, K25, K24, K23, K22, K21, K20, \
K19, K18, K17, K16, K15, K14, K13, K12, K11, K10, \
K09, K08, K07, K06, K05, K04, K03, K02, K01, K00 \
)
#else
#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
) \
LAYOUT_ortho_4x10( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX \
)
#endif

layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

ortho_4x12

For the ortho_4x12 layout, the middle two columns, and the 2 keys on each end of the bottom row are unused. This allows the hands to be positioned without ulnar deviation of the wrists.

For split keyboards using this layout the halves can be positioned and rotated for each hand and so an alternative mapping is provided. The right half is as follows: The rightmost column bottom 3 keys is the pinkie column. The middle 4 columns top 3 rows are for the remaining fingers. The pinkie column is one row lower than the other columns to provide some column stagger. The bottom row left 3 keys are the thumb keys. The remaining keys are unused. To select this mapping, append MIRYOKU_MAPPING=SPLIT to the make command line when building.

An alternative with extended thumb position but without pinkie column stagger is also provided. To select this mapping, append MIRYOKU_MAPPING=EXTENDED_THUMBS to the make command line when building.

Keyboards supporting this layout: chimera_ls, contra, efreet, jj40, jnao, lets_split, lets_split_eh, meira, niu_mini, quark, tau4, telophase, vitamins_included, zlant, 40percentclub/4x4, 40percentclub/nori, acheron/shark, boardsource/4x12, cannonkeys/ortho48, dm9records/plaid, evyd13/eon40, evyd13/pockettype, handwired/floorboard, handwired/jotanck, handwired/wulkan, kbdfans/kbd4x, keebio/levinson, keebio/wavelet, mechstudio/ud_40_ortho, planck/ez, planck/light, planck/rev1, planck/rev2, planck/rev3, planck/rev4, planck/rev5, planck/rev6, planck/thk, rgbkb/zygomorph, zvecr/split_blackpill, zvecr/zv48, keebio/nyquist/rev1, keebio/nyquist/rev2, keebio/nyquist/rev3, montsinger/rebound/rev1, montsinger/rebound/rev2, montsinger/rebound/rev3, montsinger/rebound/rev4, signum/3_0/elitec, spaceman/pancake/feather, spaceman/pancake/promicro, ymdk/ymd40/v2.

Example build command lines:

make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=ortho_4x12 # planck, ortho_4x12
make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=ortho_4x12 MIRYOKU_MAPPING=EXTENDED_THUMBS # planck, ortho_4x12, extended thumbs
make keebio/levinson:manna-harbour_miryoku:flash MIRYOKU_MAPPING=SPLIT # levinson
make keebio/levinson:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # levinson, extended thumbs

layouts/community/ortho_4x12/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#if defined MIRYOKU_MAPPING_SPLIT
#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_ortho_4x12(\
KC_NO, K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   KC_NO,\
K00,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K09,\
K10,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K19,\
K20,   KC_NO, KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   KC_NO, KC_NO, K29\
)
#elif defined MIRYOKU_MAPPING_EXTENDED_THUMBS
#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_ortho_4x12(\
K00,   K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K29,\
KC_NO, KC_NO, KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   KC_NO, KC_NO, KC_NO\
)
#else
#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_ortho_4x12(\
K00,   K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K29,\
KC_NO, KC_NO, K32,   K33,   K34,   KC_NO, KC_NO, K35,   K36,   K37,   KC_NO, KC_NO\
)
#endif

layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

ortho_5x12

As per ortho_4x12 but the top row is unused.

Keyboards supporting this layout: fractal, jj50, jnao, boardsource/5x12, cannonkeys/atlas_alps, cannonkeys/ortho60, handwired/jot50, handwired/riblee_f401, handwired/riblee_f411, handwired/rs60, keycapsss/o4l_5x12, peej/lumberjack, preonic/rev1, preonic/rev2, preonic/rev3, rgbkb/zygomorph, keebio/nyquist/rev1, keebio/nyquist/rev2, keebio/nyquist/rev3.

Example build command lines:

make preonic/rev3:manna-harbour_miryoku:flash # preonic/rev3
make preonic/rev3:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # preonic/rev3, extended thumbs
make keebio/nyquist/rev3:manna-harbour_miryoku:flash MIRYOKU_MAPPING=SPLIT # nyquist/rev3, split
make keebio/nyquist/rev3:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # nyquist/rev3, extended thumbs

layouts/community/ortho_5x12/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#if defined MIRYOKU_MAPPING_SPLIT
#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_ortho_5x12(\
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
KC_NO, K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   KC_NO,\
K00,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K09,\
K10,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K19,\
K20,   KC_NO, KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   KC_NO, KC_NO, K29\
)
#elif defined MIRYOKU_MAPPING_EXTENDED_THUMBS
#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_ortho_5x12(\
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
K00,   K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K29,\
KC_NO, KC_NO, KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   KC_NO, KC_NO, KC_NO\
)
#else
#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_ortho_5x12(\
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
K00,   K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K29,\
KC_NO, KC_NO, K32,   K33,   K34,   KC_NO, KC_NO, K35,   K36,   K37,   KC_NO, KC_NO\
)
#endif

layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

ortho_5x15

For the ortho_5x15 layout, the top row, middle 5 columns, and the 2 keys on each end of the bottom row are unused. This allows the hands to be positioned without ulnar deviation of the wrists.

An alternative subset mapping is also provided with the thumb keys shifted across one position in the direction of thumb extension. To select this mapping, append MIRYOKU_MAPPING=EXTENDED_THUMBS to the make command line when building.

Keyboards supporting this layout: atomic, geminate60, idobo, punk75, xd75, 40percentclub/5x5, 40percentclub/i75, cannonkeys/ortho75, sendyyeah/75pixels.

Example build command lines:

make atomic:manna-harbour_miryoku:flash # atomic
make atomic:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # atomic, extended thumbs
make idobo:manna-harbour_miryoku:flash # idobo

layouts/community/ortho_5x15/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#if defined MIRYOKU_MAPPING_EXTENDED_THUMBS
#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29,\
N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39\
)\
LAYOUT_ortho_5x15(\
XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
K00, K01, K02, K03, K04, XXX, XXX, XXX, XXX, XXX, K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14, XXX, XXX, XXX, XXX, XXX, K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29,\
XXX, XXX, XXX, K32, K33, K34, XXX, XXX, XXX, K35, K36, K37, XXX, XXX, XXX\
)
#else
#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29,\
N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39\
)\
LAYOUT_ortho_5x15(\
XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
K00, K01, K02, K03, K04, XXX, XXX, XXX, XXX, XXX, K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14, XXX, XXX, XXX, XXX, XXX, K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29,\
XXX, XXX, K32, K33, K34, XXX, XXX, XXX, XXX, XXX, K35, K36, K37, XXX, XXX\
)
#endif

layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

planck_mit

The middle two columns including the middle 2u key, and the 2 keys on each end of the bottom row are unused.

Keyboards supporting this layout: bm40hsrgb, contra, efreet, jj40, latin47ble, mt40, niu_mini, quark, zlant, dm9records/plaid, evyd13/eon40, handwired/aranck, handwired/heisenberg, kbdfans/kbd4x, planck/ez, planck/light, planck/rev1, planck/rev2, planck/rev3, planck/rev4, planck/rev5, planck/rev6, planck/thk, spaceman/pancake/feather, spaceman/pancake/promicro.

Example build command lines:

make planck/ez:manna-harbour_miryoku:flash # planck ez
make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=planck_mit # planck rev6, mit

layouts/community/planck_mit/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_planck_mit(\
K00,   K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K29,\
KC_NO, KC_NO, K32,   K33,   K34,      KC_NO,     K35,   K36,   K37,   KC_NO, KC_NO\
)

layouts/community/planck_mit/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

split_3x5_3

Keyboards supporting this layout: arch_36, boardsource/microdox, centromere, crkbd, eek, miniaxe, minidox/rev1, pteron36, squiggle/rev1, suihankey/split/rev1.

Example build command lines:

make crkbd:manna-harbour_miryoku:flash # crkbd
make minidox:manna-harbour_miryoku:flash # minidox

layouts/community/split_3x5_3/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,          K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_split_3x5_3(\
K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29,\
              K32,   K33,   K34,          K35,   K36,   K37\
)

layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

split_3x6_3

The outer columns are unused.

Keyboards supporting this layout: centromere, crkbd, bastardkb/tbkmini.

Example build command lines:

make bastardkb/tbkmini:manna-harbour_miryoku:flash # bastardkb/tbkmini
make crkbd:manna-harbour_miryoku:flash # crkbd

layouts/community/split_3x6_3/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define LAYOUT_miryoku(\
       K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09,\
       K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19,\
       K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29,\
       N30,   N31,   K32,   K33,   K34,          K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_split_3x6_3(\
KC_NO, K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09,   KC_NO,\
KC_NO, K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19,   KC_NO,\
KC_NO, K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29,   KC_NO,\
                     K32,   K33,   K34,          K35,   K36,   K37\
)

layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

Keyboards

To use the keymap on a keyboard which does not support the layouts feature, LAYOUT_miryoku is defined as a macro mapping onto the keyboard’s own LAYOUT macro, leaving the unused keys as KC_NO.

atreus

Only the main 5x3 alphas and the inner 3 thumb keys are used.

To build for this keyboard,

make atreus:manna-harbour_miryoku:flash

keyboards/atreus/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29,\
N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39\
)\
LAYOUT(\
K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29,\
XXX, XXX, XXX, K32, K33, K34,      K35, K36, K37, XXX, XXX, XXX\
)

keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

bastardkb/scylla

To build for this keyboard,

make bastardkb/scylla:manna-harbour_miryoku:flash

keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku( \
     K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, \
     K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, \
     K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29, \
     N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39 \
) \
LAYOUT_split_4x6_5( \
XXX, XXX, XXX, XXX, XXX, XXX,                XXX, XXX, XXX, XXX, XXX, XXX, \
XXX, K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, XXX, \
XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX, \
XXX, K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29, XXX, \
               K32, K33, K34,                K35, K36, K37, \
                    XXX, XXX,                XXX, XXX \
)

keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

ergotravel

To build for this keyboard,

make ergotravel:manna-harbour_miryoku:flash

keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku( \
     K00, K01, K02, K03, K04,                 K05, K06, K07, K08, K09, \
     K10, K11, K12, K13, K14,                 K15, K16, K17, K18, K19, \
     K20, K21, K22, K23, K24,                 K25, K26, K27, K28, K29, \
     N30, N31, K32, K33, K34,                 K35, K36, K37, N38, N39 \
) \
LAYOUT( \
XXX, K00, K01, K02, K03, K04, XXX,       XXX, K05, K06, K07, K08, K09, XXX, \
XXX, K10, K11, K12, K13, K14, XXX,       XXX, K15, K16, K17, K18, K19, XXX, \
XXX, K20, K21, K22, K23, K24, XXX,       XXX, K25, K26, K27, K28, K29, XXX, \
XXX, XXX, XXX, K32,      K33, K34,       K35, K36,      K37, XXX, XXX, XXX  \
)

keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

for_science

The top row is unused.

To build for this keyboard,

make for_science:manna-harbour_miryoku:flash

keyboards/for_science/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04,     K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,     K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,     K25, K26, K27, K28, K29,\
N30, N31, K32, K33, K34,     K35, K36, K37, N38, N39\
)\
LAYOUT(\
XXX, XXX, XXX, XXX, XXX,     XXX, XXX, XXX, XXX, XXX,\
K00, K01, K02, K03, K04,     K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,     K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,     K25, K26, K27, K28, K29,\
          K32, K33, K34,     K35, K36, K37\
)

keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

gergo

Only the main 5x3 alphas and the outer 3 thumb keys are used.

To build for this keyboard,

make gergo:manna-harbour_miryoku:flash

keyboards/gergo/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39\
)\
LAYOUT_gergo(\
XXX, K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14, XXX,                XXX, K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24, XXX, XXX,      XXX, XXX, K25, K26, K27, K28, K29, XXX,\
                    K32, K33, K34, XXX,      XXX, K35, K36, K37\
)

keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

handwired/dactyl_manuform/4x5

Only the main 5x3 alphas and the main 3 thumb keys are used.

To build for this keyboard,

make handwired/dactyl_manuform/4x5:manna-harbour_miryoku:flash

keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04,                         K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,                         K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,                         K25, K26, K27, K28, K29,\
N30, N31, K32, K33, K34,                         K35, K36, K37, N38, N39\
)\
LAYOUT( \
K00, K01, K02, K03, K04,                         K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,                         K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,                         K25, K26, K27, K28, K29,\
     XXX, XXX,                                             XXX, XXX, \
               K32, K33,                         K36, K37, \
                         K34, XXX,     XXX, K35, \
                         XXX, XXX,     XXX, XXX \
)

keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

handwired/dactyl_manuform/5x6

Only the main 5x3 alphas and the main 3 thumb keys are used.

To build for this keyboard,

make handwired/dactyl_manuform/5x6:manna-harbour_miryoku:flash

keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                         K05, K06, K07, K08, K09, \
     K10, K11, K12, K13, K14,                         K15, K16, K17, K18, K19, \
     K20, K21, K22, K23, K24,                         K25, K26, K27, K28, K29, \
     N30, N31, K32, K33, K34,                         K35, K36, K37, N38, N39 \
) \
LAYOUT_5x6( \
XXX, XXX, XXX, XXX, XXX, XXX,                         XXX, XXX, XXX, XXX, XXX, XXX, \
XXX, K00, K01, K02, K03, K04,                         K05, K06, K07, K08, K09, XXX, \
XXX, K10, K11, K12, K13, K14,                         K15, K16, K17, K18, K19, XXX, \
XXX, K20, K21, K22, K23, K24,                         K25, K26, K27, K28, K29, XXX, \
          XXX, XXX,                                             XXX, XXX, \
                    K32, K33,                         K36, K37, \
                              K34, XXX,     XXX, K35, \
                              XXX, XXX,     XXX, XXX \
)

keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

keebio/iris

Only the main 5x3 alphas and the bottom 3 thumb keys are used.

To build for this keyboard,

make keebio/iris/rev4:manna-harbour_miryoku:flash

keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39\
)\
LAYOUT(\
XXX, XXX, XXX, XXX, XXX, XXX,                XXX, XXX, XXX, XXX, XXX, XXX,\
XXX, K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24, XXX,      XXX, K25, K26, K27, K28, K29, XXX,\
                    K32, K33, K34,      K35, K36, K37\
)

keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

keyboardio/atreus

Only the main 5x3 alphas and the inner 3 thumb keys are used.

To build for this keyboard,

make keyboardio/atreus:manna-harbour_miryoku:flash

keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku( \
K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, \
K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, \
K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29, \
N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39 \
) \
LAYOUT( \
K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, \
K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, \
K20, K21, K22, K23, K24, XXX,      XXX, K25, K26, K27, K28, K29, \
XXX, XXX, XXX, K32, K33, K34,      K35, K36, K37, XXX, XXX, XXX \
)

keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

lily58

Only the main 5x3 alphas and the inner 3 thumb keys are used.

To build for this keyboard,

make lily58:manna-harbour_miryoku:flash

keyboards/lily58/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39\
)\
LAYOUT(\
XXX, XXX, XXX, XXX, XXX, XXX,                XXX, XXX, XXX, XXX, XXX, XXX,\
XXX, K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24, XXX,      XXX, K25, K26, K27, K28, K29, XXX,\
               XXX, K32, K33, K34,      K35, K36, K37, XXX\
)

keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

moonlander

The main 5x3 alphas are used as usual. The primary, secondary, and tertiary thumb keys are the closest piano key, middle piano key, and the innermost key of the partial bottom row, respectively. The remaining keys are unused.

To build for this keyboard,

make moonlander:manna-harbour_miryoku:flash

keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,               K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,               K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,               K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,               K35, K36, K37, N38, N39\
)\
LAYOUT_moonlander(\
XXX, XXX, XXX, XXX, XXX, XXX, XXX,     XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
XXX, K00, K01, K02, K03, K04, XXX,     XXX, K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14, XXX,     XXX, K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24,               K25, K26, K27, K28, K29, XXX,\
XXX, XXX, XXX, XXX, K32,      XXX,     XXX,      K37, XXX, XXX, XXX, XXX,\
                    K33, K34, XXX,     XXX, K35, K36\
)

keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

redox_w

Only the main 5x3 alphas and the main 3 thumb keys are used.

To build for this keyboard,

make redox_w:manna-harbour_miryoku:flash

keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39\
)\
LAYOUT(\
XXX, XXX, XXX, XXX, XXX, XXX,                          XXX, XXX, XXX, XXX, XXX, XXX,\
XXX, K00, K01, K02, K03, K04, XXX,                XXX, K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14, XXX,                XXX, K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24, XXX, XXX,      XXX, XXX, K25, K26, K27, K28, K29, XXX,\
XXX, XXX, XXX, XXX,    K32,   K33, K34,      K35, K36,    K37,   XXX, XXX, XXX, XXX\
)

keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

sofle

To build for this keyboard,

make sofle:manna-harbour_miryoku:flash

keyboards/sofle/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39\
)\
LAYOUT(\
XXX, XXX, XXX, XXX, XXX, XXX,                XXX, XXX, XXX, XXX, XXX, XXX,\
XXX, K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24, XXX,      XXX, K25, K26, K27, K28, K29, XXX,\
          XXX, XXX, K32, K33, K34,      K35, K36, K37, XXX, XXX\
)

keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

splitkb/kyria

Only the main 5x3 alphas and the middle 3 lower thumb keys are used.

An alternative subset mapping is also provided with the thumb keys shifted one position in the direction of thumb extension. To select this mapping, append MIRYOKU_MAPPING=EXTENDED_THUMBS to the make command line when building.

To build for this keyboard,

make splitkb/kyria:manna-harbour_miryoku:flash
make splitkb/kyria:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # extended thumb position

keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#if defined MIRYOKU_MAPPING_EXTENDED_THUMBS
#define LAYOUT_miryoku( \
     K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09, \
     K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19, \
     K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29, \
     N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39 \
) \
LAYOUT( \
XXX, K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09, XXX, \
XXX, K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19, XXX, \
XXX, K20, K21, K22, K23, K24, XXX, XXX,      XXX, XXX, K25, K26, K27, K28, K29, XXX, \
               XXX, XXX, K32, K33, K34,      K35, K36, K37, XXX, XXX \
)
#else
#define LAYOUT_miryoku( \
     K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09, \
     K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19, \
     K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29, \
     N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39 \
) \
LAYOUT( \
XXX, K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09, XXX, \
XXX, K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19, XXX, \
XXX, K20, K21, K22, K23, K24, XXX, XXX,      XXX, XXX, K25, K26, K27, K28, K29, XXX, \
               XXX, K32, K33, K34, XXX,      XXX, K35, K36, K37, XXX \
)
#endif

keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

torn

To build for this keyboard,

make torn:manna-harbour_miryoku:flash

keyboards/torn/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define LAYOUT_miryoku( \
       K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09, \
       K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19, \
       K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29, \
       N30,   N31,   K32,   K33,   K34,          K35,   K36,   K37,   N38,   N39 \
) \
LAYOUT_split_3x6_4( \
KC_NO, K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09,   KC_NO, \
KC_NO, K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19,   KC_NO, \
KC_NO, K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29,   KC_NO, \
              KC_NO, K32,   K33,   K34,          K35,   K36,   K37,   KC_NO \
)

keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

Customisation

To add customisations to a keyboard or layout while importing the miryoku keymap, copy config.h and keymap.c from the keyboard or layout’s manna-harbour_miryoku/ directory to a new directory, and create rules.mk containing USER_NAME := manna-harbour_miryoku. The miryoku keymap will be imported and customisations can be added to those files as usual. Keycodes can be added to unused keys by editing LAYOUT_miryoku in config.h.

For an unsupported keyboard or layout, do as above with a similar keyboard or layout and modify LAYOUT_miryoku in config.h referring to the keyboard or layout’s LAYOUT macro.

Examples

To use any of the examples, create a new branch from the miryoku development branch and follow the same steps as seen in the commit messages and code changes in the examples, making the appropriate changes for your keyboard and desired customisations.

Add Layers

https://github.com/manna-harbour/qmk_firmware/commits/miryoku-examples-add-layers/keyboards/crkbd/keymaps/miryoku-examples-add-layers

Files

manna-harbour_miryoku

Directory actions

More options

Directory actions

More options

Latest commit

History

manna-harbour_miryoku

Folders and files

parent directory

Miryoku QMK

Branches

QMK master

Miryoku QMK development branch

Layout

General Principles

Details

Layers

Base

Tap

Alphas

Thumbs

Hold

Nav

Mouse

Button

Media

Num

Sym

Fun

Alternative Layouts

Alphas

AZERTY

Colemak

Colemak Mod-DHk

Dvorak

Halmak

Workman

QWERTY

QWERTZ

Nav

vi-Style

Inverted-T

Clipboard

Default

Fun Cluster

Mac

Windows

Layers

Flip

Code Generation

Table Conversion Scripts

table-layout-taphold

table-layout-half

table-layout-full

table-enums

table-keycode-mappings

Data

symbol-names

mods

nonkc

header

license-qmk

Subset Mapping

Userspace

Layouts

60_ansi

ergodox

ortho_4x10

ortho_4x12

ortho_5x12

ortho_5x15

planck_mit

split_3x5_3

split_3x6_3

Keyboards

atreus

bastardkb/scylla

ergotravel