Hal.h

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set sw=2 ts=8 et ft=cpp : */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this file,
 * You can obtain one at http://mozilla.org/MPL/2.0/. */

#ifndef mozilla_Hal_h
#define mozilla_Hal_h

#include "base/basictypes.h"
#include "base/platform_thread.h"
#include "nsTArray.h"
#include "mozilla/dom/battery/Types.h"
#include "mozilla/dom/network/Types.h"
#include "mozilla/dom/power/Types.h"
#include "mozilla/dom/ScreenOrientation.h"
#include "mozilla/hal_sandbox/PHal.h"
#include "mozilla/HalScreenConfiguration.h"
#include "mozilla/HalTypes.h"
#include "mozilla/Observer.h"
#include "mozilla/Types.h"

/*
 * Hal.h contains the public Hal API.
 *
 * By default, this file defines its functions in the hal namespace, but if
 * MOZ_HAL_NAMESPACE is defined, we'll define our functions in that namespace.
 *
 * This is used by HalImpl.h and HalSandbox.h, which define copies of all the
 * functions here in the hal_impl and hal_sandbox namespaces.
 */

class nsPIDOMWindowInner;

#ifndef MOZ_HAL_NAMESPACE
# define MOZ_HAL_NAMESPACE hal
# define MOZ_DEFINED_HAL_NAMESPACE 1
#endif

namespace mozilla {

namespace hal {

class WindowIdentifier;

typedef Observer<int64_t> SystemClockChangeObserver;
typedef Observer<SystemTimezoneChangeInformation> SystemTimezoneChangeObserver;

} // namespace hal

namespace MOZ_HAL_NAMESPACE {

/**
 * Turn the default vibrator device on/off per the pattern specified
 * by |pattern|.  Each element in the pattern is the number of
 * milliseconds to turn the vibrator on or off.  The first element in
 * |pattern| is an "on" element, the next is "off", and so on.
 *
 * If |pattern| is empty, any in-progress vibration is canceled.
 *
 * Only an active window within an active tab may call Vibrate; calls
 * from inactive windows and windows on inactive tabs do nothing.
 *
 * If you're calling hal::Vibrate from the outside world, pass an
 * nsIDOMWindow* in place of the WindowIdentifier parameter.
 * The method with WindowIdentifier will be called automatically.
 */
void Vibrate(const nsTArray<uint32_t>& pattern,
             nsPIDOMWindowInner* aWindow);
void Vibrate(const nsTArray<uint32_t>& pattern,
             const hal::WindowIdentifier &id);

/**
 * Cancel a vibration started by the content window identified by
 * WindowIdentifier.
 *
 * If the window was the last window to start a vibration, the
 * cancellation request will go through even if the window is not
 * active.
 *
 * As with hal::Vibrate(), if you're calling hal::CancelVibrate from the outside
 * world, pass an nsIDOMWindow*. The method with WindowIdentifier will be called
 * automatically.
 */
void CancelVibrate(nsPIDOMWindowInner* aWindow);
void CancelVibrate(const hal::WindowIdentifier &id);

/**
 * Inform the battery backend there is a new battery observer.
 * @param aBatteryObserver The observer that should be added.
 */
void RegisterBatteryObserver(BatteryObserver* aBatteryObserver);

/**
 * Inform the battery backend a battery observer unregistered.
 * @param aBatteryObserver The observer that should be removed.
 */
void UnregisterBatteryObserver(BatteryObserver* aBatteryObserver);

/**
 * Returns the current battery information.
 */
void GetCurrentBatteryInformation(hal::BatteryInformation* aBatteryInfo);

/**
 * Notify of a change in the battery state.
 * @param aBatteryInfo The new battery information.
 */
void NotifyBatteryChange(const hal::BatteryInformation& aBatteryInfo);

/**
 * Register an observer for the sensor of given type.
 *
 * The observer will receive data whenever the data generated by the
 * sensor is avaiable.
 */
void RegisterSensorObserver(hal::SensorType aSensor,
                            hal::ISensorObserver *aObserver);

/**
 * Unregister an observer for the sensor of given type.
 */
void UnregisterSensorObserver(hal::SensorType aSensor,
                              hal::ISensorObserver *aObserver);

/**
 * Post a value generated by a sensor.
 *
 * This API is internal to hal; clients shouldn't call it directly.
 */
void NotifySensorChange(const hal::SensorData &aSensorData);

/**
 * Enable sensor notifications from the backend
 *
 * This method is only visible from implementation of sensor manager.
 * Rest of the system should not try this.
 */
void EnableSensorNotifications(hal::SensorType aSensor);

/**
 * Disable sensor notifications from the backend
 *
 * This method is only visible from implementation of sensor manager.
 * Rest of the system should not try this.
 */
void DisableSensorNotifications(hal::SensorType aSensor);


/**
 * Inform the network backend there is a new network observer.
 * @param aNetworkObserver The observer that should be added.
 */
void RegisterNetworkObserver(NetworkObserver* aNetworkObserver);

/**
 * Inform the network backend a network observer unregistered.
 * @param aNetworkObserver The observer that should be removed.
 */
void UnregisterNetworkObserver(NetworkObserver* aNetworkObserver);

/**
 * Returns the current network information.
 */
void GetCurrentNetworkInformation(hal::NetworkInformation* aNetworkInfo);

/**
 * Notify of a change in the network state.
 * @param aNetworkInfo The new network information.
 */
void NotifyNetworkChange(const hal::NetworkInformation& aNetworkInfo);

/**
 * Adjusting system clock.
 * @param aDeltaMilliseconds The difference compared with current system clock.
 */
void AdjustSystemClock(int64_t aDeltaMilliseconds);

/**
 * Register observer for system clock changed notification.
 * @param aObserver The observer that should be added.
 */
void RegisterSystemClockChangeObserver(
  hal::SystemClockChangeObserver* aObserver);

/**
 * Unregister the observer for system clock changed.
 * @param aObserver The observer that should be removed.
 */
void UnregisterSystemClockChangeObserver(
  hal::SystemClockChangeObserver* aObserver);

/**
 * Notify of a change in the system clock.
 * @param aClockDeltaMS
 */
void NotifySystemClockChange(const int64_t& aClockDeltaMS);

/**
 * Register observer for system timezone changed notification.
 * @param aObserver The observer that should be added.
 */
void RegisterSystemTimezoneChangeObserver(
  hal::SystemTimezoneChangeObserver* aObserver);

/**
 * Unregister the observer for system timezone changed.
 * @param aObserver The observer that should be removed.
 */
void UnregisterSystemTimezoneChangeObserver(
  hal::SystemTimezoneChangeObserver* aObserver);

/**
 * Notify of a change in the system timezone.
 * @param aSystemTimezoneChangeInfo
 */
void NotifySystemTimezoneChange(
  const hal::SystemTimezoneChangeInformation& aSystemTimezoneChangeInfo);

/**
 * Enable wake lock notifications from the backend.
 *
 * This method is only used by WakeLockObserversManager.
 */
void EnableWakeLockNotifications();

/**
 * Disable wake lock notifications from the backend.
 *
 * This method is only used by WakeLockObserversManager.
 */
void DisableWakeLockNotifications();

/**
 * Inform the wake lock backend there is a new wake lock observer.
 * @param aWakeLockObserver The observer that should be added.
 */
void RegisterWakeLockObserver(WakeLockObserver* aObserver);

/**
 * Inform the wake lock backend a wake lock observer unregistered.
 * @param aWakeLockObserver The observer that should be removed.
 */
void UnregisterWakeLockObserver(WakeLockObserver* aObserver);

/**
 * Adjust a wake lock's counts on behalf of a given process.
 *
 * In most cases, you shouldn't need to pass the aProcessID argument; the
 * default of CONTENT_PROCESS_ID_UNKNOWN is probably what you want.
 *
 * @param aTopic        lock topic
 * @param aLockAdjust   to increase or decrease active locks
 * @param aHiddenAdjust to increase or decrease hidden locks
 * @param aProcessID    indicates which process we're modifying the wake lock
 *                      on behalf of.  It is interpreted as
 *
 *                      CONTENT_PROCESS_ID_UNKNOWN: The current process
 *                      CONTENT_PROCESS_ID_MAIN: The root process
 *                      X: The process with ContentChild::GetID() == X
 */
void ModifyWakeLock(const nsAString &aTopic,
                    hal::WakeLockControl aLockAdjust,
                    hal::WakeLockControl aHiddenAdjust,
                    uint64_t aProcessID = hal::CONTENT_PROCESS_ID_UNKNOWN);

/**
 * Query the wake lock numbers of aTopic.
 * @param aTopic        lock topic
 * @param aWakeLockInfo wake lock numbers
 */
void GetWakeLockInfo(const nsAString &aTopic, hal::WakeLockInformation *aWakeLockInfo);

/**
 * Notify of a change in the wake lock state.
 * @param aWakeLockInfo The new wake lock information.
 */
void NotifyWakeLockChange(const hal::WakeLockInformation& aWakeLockInfo);

/**
 * Inform the backend there is a new screen configuration observer.
 * @param aScreenConfigurationObserver The observer that should be added.
 */
void RegisterScreenConfigurationObserver(hal::ScreenConfigurationObserver* aScreenConfigurationObserver);

/**
 * Inform the backend a screen configuration observer unregistered.
 * @param aScreenConfigurationObserver The observer that should be removed.
 */
void UnregisterScreenConfigurationObserver(hal::ScreenConfigurationObserver* aScreenConfigurationObserver);

/**
 * Returns the current screen configuration.
 */
void GetCurrentScreenConfiguration(hal::ScreenConfiguration* aScreenConfiguration);

/**
 * Notify of a change in the screen configuration.
 * @param aScreenConfiguration The new screen orientation.
 */
void NotifyScreenConfigurationChange(const hal::ScreenConfiguration& aScreenConfiguration);

/**
 * Lock the screen orientation to the specific orientation.
 * @return Whether the lock has been accepted.
 */
MOZ_MUST_USE bool LockScreenOrientation(const dom::ScreenOrientationInternal& aOrientation);

/**
 * Unlock the screen orientation.
 */
void UnlockScreenOrientation();

/**
 * Register an observer for the switch of given SwitchDevice.
 *
 * The observer will receive data whenever the data generated by the
 * given switch.
 */
void RegisterSwitchObserver(hal::SwitchDevice aDevice, hal::SwitchObserver *aSwitchObserver);

/**
 * Unregister an observer for the switch of given SwitchDevice.
 */
void UnregisterSwitchObserver(hal::SwitchDevice aDevice, hal::SwitchObserver *aSwitchObserver);

/**
 * Notify the state of the switch.
 *
 * This API is internal to hal; clients shouldn't call it directly.
 */
void NotifySwitchChange(const hal::SwitchEvent& aEvent);

/**
 * Return true if the current platform supports the setting of process
 * priority.
 */
bool SetProcessPrioritySupported();

/**
 * Set the priority of the given process.
 *
 * Exactly what this does will vary between platforms.  On *nix we might give
 * background processes higher nice values.  On other platforms, we might
 * ignore this call entirely.
 */
void SetProcessPriority(int aPid, hal::ProcessPriority aPriority);


/**
 * Set the current thread's priority to appropriate platform-specific value for
 * given functionality. Instead of providing arbitrary priority numbers you
 * must specify a type of function like THREAD_PRIORITY_COMPOSITOR.
 */
void SetCurrentThreadPriority(hal::ThreadPriority aThreadPriority);

/**
 * Set a thread priority to appropriate platform-specific value for
 * given functionality. Instead of providing arbitrary priority numbers you
 * must specify a type of function like THREAD_PRIORITY_COMPOSITOR.
 */
void SetThreadPriority(PlatformThreadId aThreadId,
                       hal::ThreadPriority aThreadPriority);

/**
 * Start monitoring disk space for low space situations.
 *
 * This API is currently only allowed to be used from the main process.
 */
void StartDiskSpaceWatcher();

/**
 * Stop monitoring disk space for low space situations.
 *
 * This API is currently only allowed to be used from the main process.
 */
void StopDiskSpaceWatcher();

} // namespace MOZ_HAL_NAMESPACE
} // namespace mozilla

#ifdef MOZ_DEFINED_HAL_NAMESPACE
# undef MOZ_DEFINED_HAL_NAMESPACE
# undef MOZ_HAL_NAMESPACE
#endif

#endif  // mozilla_Hal_h