Portable TPM 2.0 project designed for embedded use.
- This implementation provides all TPM 2.0 API’s in compliance with the specification.
- Wrappers provided to simplify Key Generation/Loading, RSA encrypt/decrypt, ECC sign/verify, ECDH, NV, Hashing/HACM, AES, Sealing/Unsealing, Attestation, PCR Extend/Quote and Secure Root of Trust.
- Testing done using the following TPM 2.0 modules: STM ST33TP* SPI/I2C, Infineon OPTIGA SLB9670/SLB9672, Microchip ATTPM20, Nations Tech Z32H330TC and Nuvoton NPCT650/NPCT750.
- wolfTPM uses the TPM Interface Specification (TIS) to communicate either over SPI, or using a memory mapped I/O range.
- wolfTPM can also use the Linux TPM kernel interface (/dev/tpmX) to talk with any physical TPM on SPI, I2C and even LPC bus.
- Platform support for Raspberry Pi (Linux), MMIO, STM32 with CubeMX, Atmel ASF, Xilinx, QNX Infineon TriCore and Barebox.
- The design allows for easy portability to different platforms:
- Native C code designed for embedded use.
- Single IO callback for hardware SPI interface.
- No external dependencies.
- Compact code size and minimal memory use.
- Includes example code for:
- Most TPM2 native API’s
- All TPM2 wrapper API's
- PKCS 7
- Certificate Signing Request (CSR)
- TLS Client
- TLS Server
- Use of the TPM's Non-volatile memory
- Attestation (activate and make credential)
- Benchmarking TPM algorithms and TLS
- Key Generation (primary, RSA/ECC and symmetric), loading and storing to flash (NV memory)
- Sealing and Unsealing data with an RSA key
- Time signed or set
- PCR read/reset
- GPIO configure, read and write.
- Parameter encryption support using AES-CFB or XOR.
- Support for salted unbound authenticated sessions.
- Support for HMAC Sessions.
Note: See examples/README.md for details on using the examples.
Platform TPM_RH_PLATFORM
Owner TPM_RH_OWNER
Endorsement TPM_RH_ENDORSEMENT
Each hierarchy has their own manufacture generated seed.
The arguments used on TPM2_Create or TPM2_CreatePrimary create a template, which is fed into a KDF to produce the same key based hierarchy used. The key generated is the same each time; even after reboot. The generation of a new RSA 2048 bit key takes about 15 seconds. Typically these are created and then stored in NV using TPM2_EvictControl. Each TPM generates their own keys uniquely based on the seed.
There is also an Ephemeral hierarchy (TPM_RH_NULL), which can be used to create ephemeral keys.
Contains hash digests for SHA-1 and SHA-256 with an index 0-23. These hash digests can be extended to prove the integrity of a boot sequence (secure boot).
This project uses the terms append vs. marshall and parse vs. unmarshall.
Acronyms:
- NV: Non-Volatile memory.
The examples in this library are written for use on a Raspberry Pi and use the spi_dev interface.
See the HAL manual in [`hal/README.md] (hal/README.md).
For interfacing to your hardware interface (SPI/I2C) a single HAL callback is used and configuration on initialization when calling TPM2_Init or wolfTPM2_Init.
There are HAL examples in hal directory for Linux, STM32 CubeMX, Atmel ASF, Xilinx, Infineon TriCore and BareBox.
We also support an advanced IO option (--enable-advio/WOLFTPM_ADV_IO), which adds the register and read/write flag as parameter to the IO callback. This is required for I2C support.
Tested with:
- Infineon OPTIGA (TM) Trusted Platform Module 2.0 SLB 9670 and SLB9672.
- LetsTrust: [http://letstrust.de] (https://buyzero.de/collections/andere-platinen/products/letstrust-hardware-tpm-trusted-platform-module). Compact Raspberry Pi TPM 2.0 board based on Infineon SLB 9670.
- ST ST33TP* TPM 2.0 module (SPI and I2C)
- Microchip ATTPM20 module
- Nuvoton NPCT65X or NPCT75x TPM2.0 module
Infineon SLB9670: TPM2: Caps 0x30000697, Did 0x001b, Vid 0x15d1, Rid 0x10 Mfg IFX (1), Vendor SLB9670, Fw 7.85 (4555), FIPS 140-2 1, CC-EAL4 1
Infineon SLB9672: TPM2: Caps 0x30000697, Did 0x001d, Vid 0x15d1, Rid 0x36 Mfg IFX (1), Vendor SLB9672, Fw 16.10 (0x4068), FIPS 140-2 1, CC-EAL4 1
ST ST33TP SPI TPM2: Caps 0x1a7e2882, Did 0x0000, Vid 0x104a, Rid 0x4e Mfg STM (2), Vendor , Fw 74.8 (1151341959), FIPS 140-2 1, CC-EAL4 0
ST ST33TP I2C TPM2: Caps 0x1a7e2882, Did 0x0000, Vid 0x104a, Rid 0x4e Mfg STM (2), Vendor , Fw 74.9 (1151341959), FIPS 140-2 1, CC-EAL4 0
Microchip ATTPM20 TPM2: Caps 0x30000695, Did 0x3205, Vid 0x1114, Rid 0x 1 Mfg MCHP (3), Vendor , Fw 512.20481 (0), FIPS 140-2 0, CC-EAL4 0
Nations Technologies Inc. TPM 2.0 module Mfg NTZ (0), Vendor Z32H330, Fw 7.51 (419631892), FIPS 140-2 0, CC-EAL4 0
Nuvoton NPCT650 TPM2.0 Mfg NTC (0), Vendor rlsNPCT , Fw 1.3 (65536), FIPS 140-2 0, CC-EAL4 0
Nuvoton NPCT750 TPM2.0 TPM2: Caps 0x30000697, Did 0x00fc, Vid 0x1050, Rid 0x 1 Mfg NTC (0), Vendor NPCT75x"!!4rls, Fw 7.2 (131072), FIPS 140-2 1, CC-EAL4 0
git clone https://github.com/wolfSSL/wolfssl.git
cd wolfssl
./autogen.sh
./configure --enable-certgen --enable-certreq --enable-certext --enable-pkcs7 --enable-cryptocb --enable-aescfb
make
sudo make install
sudo ldconfig
autogen.sh requires: automake and libtool: sudo apt-get install automake libtool
--enable-debug Add debug code/turns off optimizations (yes|no|verbose|io) - DEBUG_WOLFTPM, WOLFTPM_DEBUG_VERBOSE, WOLFTPM_DEBUG_IO
--enable-examples Enable Examples (default: enabled)
--enable-wrapper Enable wrapper code (default: enabled) - WOLFTPM2_NO_WRAPPER
--enable-wolfcrypt Enable wolfCrypt hooks for RNG, Auth Sessions and Parameter encryption (default: enabled) - WOLFTPM2_NO_WOLFCRYPT
--enable-advio Enable Advanced IO (default: disabled) - WOLFTPM_ADV_IO
--enable-i2c Enable I2C TPM Support (default: disabled, requires advio) - WOLFTPM_I2C
--enable-checkwaitstate Enable TIS / SPI Check Wait State support (default: depends on chip) - WOLFTPM_CHECK_WAIT_STATE
--enable-smallstack Enable options to reduce stack usage
--enable-tislock Enable Linux Named Semaphore for locking access to SPI device for concurrent access between processes - WOLFTPM_TIS_LOCK
--enable-autodetect Enable Runtime Module Detection (default: enable - when no module specified) - WOLFTPM_AUTODETECT
--enable-infineon Enable Infineon SLB9670/SLB9672 TPM Support (default: disabled)
--enable-st Enable ST ST33TPM Support (default: disabled) - WOLFTPM_ST33
--enable-microchip Enable Microchip ATTPM20 Support (default: disabled) - WOLFTPM_MICROCHIP
--enable-nuvoton Enable Nuvoton NPCT65x/NPCT75x Support (default: disabled) - WOLFTPM_NUVOTON
--enable-devtpm Enable using Linux kernel driver for /dev/tpmX (default: disabled) - WOLFTPM_LINUX_DEV
--enable-swtpm Enable using SWTPM TCP protocol. For use with simulator. (default: disabled) - WOLFTPM_SWTPM
--enable-winapi Use Windows TBS API. (default: disabled) - WOLFTPM_WINAPI
WOLFTPM_USE_SYMMETRIC Enables symmetric AES/Hashing/HMAC support for TLS examples.
WOLFTPM2_USE_SW_ECDHE Disables use of TPM for ECC ephemeral key generation and shared secret for TLS examples.
TLS_BENCH_MODE Enables TLS benchmarking mode.
NO_TPM_BENCH Disables the TPM benchmarking example.
Build wolfTPM:
git clone https://github.com/wolfSSL/wolfTPM.git
cd wolfTPM
./autogen.sh
./configure --enable-infineon
make
Build wolfTPM:
./autogen.sh
./configure --enable-st33 [--enable-i2c]
make
For the I2C support on Raspberry Pi you may need to enable I2C. Here are the steps:
- Edit
sudo vim /boot/config.txt - Uncomment
dtparam=i2c_arm=on - Reboot
sudo reboot
Build wolfTPM:
./autogen.sh
./configure --enable-microchip
make
Build wolfTPM:
./autogen.sh
./configure --enable-nuvoton
make
This build option allows you to talk to any TPM vendor supported by the Linux TIS kernel driver
Build wolfTPM:
./autogen.sh
./configure --enable-devtpm
make
Note: When using a TPM device through the Linux kernel driver make sure sufficient permissions are given to the application that uses wolfTPM, because the "/dev/tpmX" typically has read-write permissions only for the "tss" user group. Either run wolfTPM examples and your application using sudo or add your user to the "tss" group like this:
sudo adduser yourusername tss
This demonstrates using wolfTPM in QEMU to communicate using the linux kernel device "/dev/tpmX". You will need to install or build swtpm. Below are a short method to build. You may need to consult the instructions for libtpms and swtpm
PREFIX=$PWD/inst
git clone [email protected]:stefanberger/libtpms.git
cd libtpms/
./autogen.sh --with-openssl --with-tpm2 --prefix=$PREFIX && make install
cd ..
git clone [email protected]:stefanberger/swtpm.git
cd swtpm
PKG_CONFIG_PATH=$PREFIX/lib/pkgconfig/ ./autogen.sh --with-openssl --with-tpm2 \
--prefix=$PREFIX && \
make install
cd ..
You can setup a basic linux installation. Other installation bases can be used. This step will take some time to install the base linux system.
# download mini install image
curl -O http://archive.ubuntu.com/ubuntu/dists/bionic-updates/main/installer-amd64/current/images/netboot/mini.iso
# create qemu image file
qemu-img create -f qcow2 lubuntu.qcow2 5G
# create directory for tpm state and socket
mkdir $PREFIX/mytpm
# start swtpm
$PREFIX/bin/swtpm socket --tpm2 --tpmstate dir=$PREFIX/mytpm \
--ctrl type=unixio,path=$PREFIX/mytpm/swtpm-sock --log level=20 &
# start qemu for installation
qemu-system-x86_64 -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
-chardev socket,id=chrtpm,path=$PREFIX/mytpm/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis,tpmdev=tpm0 -hda lubuntu.qcow2 -cdrom mini.iso
Once a base system is installed it's ready to start the qemu and build wolfSSL and wolfTPM in the qemu instance.
# start swtpm again
$PREFIX/bin/swtpm socket --tpm2 --tpmstate dir=$PREFIX/mytpm \
--ctrl type=unixio,path=$PREFIX/mytpm/swtpm-sock --log level=20 &
# start qemu system to install and run wolfTPM
qemu-system-x86_64 -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
-chardev socket,id=chrtpm,path=$PREFIX/mytpm/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis,tpmdev=tpm0 -hda lubuntu.qcow2
To build checkout and build wolfTPM, in the QEMU terminal
sudo apt install automake libtool gcc git make
# get and build wolfSSL
git clone https://github.com/wolfssl/wolfssl.git
pushd wolfssl
./autogen.sh && \
./configure --enable-wolftpm --disable-examples --prefix=$PWD/../inst && \
make install
popd
# get and build wolfTPM
git clone https://github.com/wolfssl/wolftpm.git
pushd wolftpm
./autogen.sh && \
./configure --enable-devtpm --prefix=$PWD/../inst --enable-debug && \
make install
sudo make check
popd
You can now run the examples such as sudo ./examples/wrap/wrap
within QEMU. Using sudo maybe required for access to /dev/tpm0.
See docs/SWTPM.md
See docs/WindowTBS.md
CMake supports compiling in many environments including Visual Studio
if CMake support is installed. The commands below can be run in
Developer Command Prompt.
mkdir build
cd build
# to use installed wolfSSL location (library and headers)
cmake .. -DWITH_WOLFSSL=/prefix/to/wolfssl/install/
# OR to use a wolfSSL source tree
cmake .. -DWITH_WOLFSSL_TREE=/path/to/wolfssl/
# build
cmake --build .
These examples demonstrate features of a TPM 2.0 module. The examples create RSA and ECC keys in NV for testing using handles defined in ./hal/tpm_io.h. The PKCS #7 and TLS examples require generating CSR's and signing them using a test script. See examples/README.md for details on using the examples. To run the TLS sever and client on same machine you must build with WOLFTPM_TIS_LOCK to enable concurrent access protection.
./examples/wrap/wrap_test
TPM2 Demo for Wrapper API's
Mfg STM (2), Vendor , Fw 74.8 (1151341959), FIPS 140-2 1, CC-EAL4 0
RSA Encrypt/Decrypt Test Passed
RSA Encrypt/Decrypt OAEP Test Passed
RSA Key 0x80000000 Exported to wolf RsaKey
wolf RsaKey loaded into TPM: Handle 0x80000000
RSA Private Key Loaded into TPM: Handle 0x80000000
ECC Sign/Verify Passed
ECC DH Test Passed
ECC Verify Test Passed
ECC Key 0x80000000 Exported to wolf ecc_key
wolf ecc_key loaded into TPM: Handle 0x80000000
ECC Private Key Loaded into TPM: Handle 0x80000000
NV Test on index 0x1800200 with 1024 bytes passed
Hash SHA256 test success
HMAC SHA256 test success
Encrypt/Decrypt (known key) test success
Encrypt/Decrypt test success
Note: Key Generation is using existing template from hierarchy seed.
Run on Infineon OPTIGA SLB9670 at 43MHz:
./examples/bench/bench
TPM2 Benchmark using Wrapper API's
RNG 16 KB took 1.140 seconds, 14.033 KB/s
Benchmark symmetric AES-128-CBC-enc not supported!
Benchmark symmetric AES-128-CBC-dec not supported!
Benchmark symmetric AES-256-CBC-enc not supported!
Benchmark symmetric AES-256-CBC-dec not supported!
Benchmark symmetric AES-128-CTR-enc not supported!
Benchmark symmetric AES-128-CTR-dec not supported!
Benchmark symmetric AES-256-CTR-enc not supported!
Benchmark symmetric AES-256-CTR-dec not supported!
Benchmark symmetric AES-256-CFB-enc not supported!
Benchmark symmetric AES-256-CFB-dec not supported!
SHA1 138 KB took 1.009 seconds, 136.783 KB/s
SHA256 138 KB took 1.009 seconds, 136.763 KB/s
RSA 2048 key gen 5 ops took 10.981 sec, avg 2196.230 ms, 0.455 ops/sec
RSA 2048 Public 113 ops took 1.005 sec, avg 8.893 ms, 112.449 ops/sec
RSA 2048 Private 7 ops took 1.142 sec, avg 163.207 ms, 6.127 ops/sec
RSA 2048 Pub OAEP 73 ops took 1.011 sec, avg 13.848 ms, 72.211 ops/sec
RSA 2048 Priv OAEP 6 ops took 1.004 sec, avg 167.399 ms, 5.974 ops/sec
ECC 256 key gen 5 ops took 1.157 sec, avg 231.350 ms, 4.322 ops/sec
ECDSA 256 sign 15 ops took 1.033 sec, avg 68.865 ms, 14.521 ops/sec
ECDSA 256 verify 9 ops took 1.022 sec, avg 113.539 ms, 8.808 ops/sec
ECDHE 256 agree 5 ops took 1.161 sec, avg 232.144 ms, 4.308 ops/sec
Run on Infineon OPTIGA SLB9672 at 43MHz:
./examples/bench/bench
TPM2 Benchmark using Wrapper API's
Use Parameter Encryption: NULL
Loading SRK: Storage 0x81000200 (282 bytes)
RNG 24 KB took 1.070 seconds, 22.429 KB/s
Benchmark symmetric AES-128-CBC-enc not supported!
Benchmark symmetric AES-128-CBC-dec not supported!
Benchmark symmetric AES-256-CBC-enc not supported!
Benchmark symmetric AES-256-CBC-dec not supported!
Benchmark symmetric AES-128-CTR-enc not supported!
Benchmark symmetric AES-128-CTR-dec not supported!
Benchmark symmetric AES-256-CTR-enc not supported!
Benchmark symmetric AES-256-CTR-dec not supported!
AES-128-CFB-enc 86 KB took 1.001 seconds, 85.890 KB/s
AES-128-CFB-dec 88 KB took 1.020 seconds, 86.267 KB/s
AES-256-CFB-enc 86 KB took 1.023 seconds, 84.073 KB/s
AES-256-CFB-dec 86 KB took 1.019 seconds, 84.370 KB/s
SHA1 88 KB took 1.021 seconds, 86.155 KB/s
SHA256 86 KB took 1.015 seconds, 84.717 KB/s
SHA384 90 KB took 1.007 seconds, 89.405 KB/s
RSA 2048 key gen 10 ops took 15.677 sec, avg 1567.678 ms, 0.638 ops/sec
RSA 2048 Public 110 ops took 1.000 sec, avg 9.095 ms, 109.951 ops/sec
RSA 2048 Private 14 ops took 1.078 sec, avg 76.996 ms, 12.988 ops/sec
RSA 2048 Pub OAEP 51 ops took 1.012 sec, avg 19.838 ms, 50.408 ops/sec
RSA 2048 Priv OAEP 12 ops took 1.053 sec, avg 87.738 ms, 11.398 ops/sec
ECC 256 key gen 8 ops took 1.088 sec, avg 135.956 ms, 7.355 ops/sec
ECDSA 256 sign 29 ops took 1.033 sec, avg 35.621 ms, 28.073 ops/sec
ECDSA 256 verify 42 ops took 1.013 sec, avg 24.114 ms, 41.470 ops/sec
ECDHE 256 agree 16 ops took 1.055 sec, avg 65.948 ms, 15.164 ops/sec
Run on ST ST33TP SPI at 33MHz:
./examples/bench/bench
TPM2 Benchmark using Wrapper API's
RNG 14 KB took 1.017 seconds, 13.763 KB/s
AES-128-CBC-enc 40 KB took 1.008 seconds, 39.666 KB/s
AES-128-CBC-dec 42 KB took 1.032 seconds, 40.711 KB/s
AES-256-CBC-enc 40 KB took 1.013 seconds, 39.496 KB/s
AES-256-CBC-dec 40 KB took 1.011 seconds, 39.563 KB/s
AES-128-CTR-enc 26 KB took 1.055 seconds, 24.646 KB/s
AES-128-CTR-dec 26 KB took 1.035 seconds, 25.117 KB/s
AES-256-CTR-enc 26 KB took 1.028 seconds, 25.302 KB/s
AES-256-CTR-dec 26 KB took 1.030 seconds, 25.252 KB/s
AES-128-CFB-enc 42 KB took 1.045 seconds, 40.201 KB/s
AES-128-CFB-dec 40 KB took 1.008 seconds, 39.699 KB/s
AES-256-CFB-enc 40 KB took 1.022 seconds, 39.151 KB/s
AES-256-CFB-dec 42 KB took 1.041 seconds, 40.362 KB/s
SHA1 86 KB took 1.005 seconds, 85.559 KB/s
SHA256 84 KB took 1.019 seconds, 82.467 KB/s
RSA 2048 key gen 1 ops took 7.455 sec, avg 7455.036 ms, 0.134 ops/sec
RSA 2048 Public 110 ops took 1.003 sec, avg 9.122 ms, 109.624 ops/sec
RSA 2048 Private 5 ops took 1.239 sec, avg 247.752 ms, 4.036 ops/sec
RSA 2048 Pub OAEP 81 ops took 1.001 sec, avg 12.364 ms, 80.880 ops/sec
RSA 2048 Priv OAEP 4 ops took 1.007 sec, avg 251.780 ms, 3.972 ops/sec
ECC 256 key gen 5 ops took 1.099 sec, avg 219.770 ms, 4.550 ops/sec
ECDSA 256 sign 24 ops took 1.016 sec, avg 42.338 ms, 23.619 ops/sec
ECDSA 256 verify 14 ops took 1.036 sec, avg 74.026 ms, 13.509 ops/sec
ECDHE 256 agree 5 ops took 1.235 sec, avg 247.085 ms, 4.047 ops/sec
Run on Microchip ATTPM20 at 33MHz:
./examples/bench/bench
TPM2 Benchmark using Wrapper API's
RNG 2 KB took 1.867 seconds, 1.071 KB/s
Benchmark symmetric AES-128-CBC-enc not supported!
Benchmark symmetric AES-128-CBC-dec not supported!
Benchmark symmetric AES-256-CBC-enc not supported!
Benchmark symmetric AES-256-CBC-dec not supported!
Benchmark symmetric AES-128-CTR-enc not supported!
Benchmark symmetric AES-128-CTR-dec not supported!
Benchmark symmetric AES-256-CTR-enc not supported!
Benchmark symmetric AES-256-CTR-dec not supported!
AES-128-CFB-enc 16 KB took 1.112 seconds, 14.383 KB/s
AES-128-CFB-dec 16 KB took 1.129 seconds, 14.166 KB/s
AES-256-CFB-enc 12 KB took 1.013 seconds, 11.845 KB/s
AES-256-CFB-dec 12 KB took 1.008 seconds, 11.909 KB/s
SHA1 22 KB took 1.009 seconds, 21.797 KB/s
SHA256 22 KB took 1.034 seconds, 21.270 KB/s
RSA 2048 key gen 3 ops took 15.828 sec, avg 5275.861 ms, 0.190 ops/sec
RSA 2048 Public 22 ops took 1.034 sec, avg 47.021 ms, 21.267 ops/sec
RSA 2048 Private 9 ops took 1.059 sec, avg 117.677 ms, 8.498 ops/sec
RSA 2048 Pub OAEP 21 ops took 1.007 sec, avg 47.959 ms, 20.851 ops/sec
RSA 2048 Priv OAEP 9 ops took 1.066 sec, avg 118.423 ms, 8.444 ops/sec
ECC 256 key gen 7 ops took 1.072 sec, avg 153.140 ms, 6.530 ops/sec
ECDSA 256 sign 18 ops took 1.056 sec, avg 58.674 ms, 17.043 ops/sec
ECDSA 256 verify 24 ops took 1.031 sec, avg 42.970 ms, 23.272 ops/sec
ECDHE 256 agree 16 ops took 1.023 sec, avg 63.934 ms, 15.641 ops/sec
Run on Nations Technologies Inc. TPM 2.0 module at 33MHz:
./examples/bench/bench
TPM2 Benchmark using Wrapper API's
RNG 12 KB took 1.065 seconds, 11.270 KB/s
AES-128-CBC-enc 48 KB took 1.026 seconds, 46.780 KB/s
AES-128-CBC-dec 48 KB took 1.039 seconds, 46.212 KB/s
AES-256-CBC-enc 48 KB took 1.035 seconds, 46.370 KB/s
AES-256-CBC-dec 48 KB took 1.025 seconds, 46.852 KB/s
Benchmark symmetric AES-128-CTR-enc not supported!
Benchmark symmetric AES-128-CTR-dec not supported!
Benchmark symmetric AES-256-CTR-enc not supported!
Benchmark symmetric AES-256-CTR-dec not supported!
AES-128-CFB-enc 50 KB took 1.029 seconds, 48.591 KB/s
AES-128-CFB-dec 50 KB took 1.035 seconds, 48.294 KB/s
AES-256-CFB-enc 48 KB took 1.000 seconds, 47.982 KB/s
AES-256-CFB-dec 48 KB took 1.003 seconds, 47.855 KB/s
SHA1 80 KB took 1.009 seconds, 79.248 KB/s
SHA256 80 KB took 1.004 seconds, 79.702 KB/s
SHA384 78 KB took 1.018 seconds, 76.639 KB/s
RSA 2048 key gen 8 ops took 17.471 sec, avg 2183.823 ms, 0.458 ops/sec
RSA 2048 Public 52 ops took 1.004 sec, avg 19.303 ms, 51.805 ops/sec
RSA 2048 Private 8 ops took 1.066 sec, avg 133.243 ms, 7.505 ops/sec
RSA 2048 Pub OAEP 51 ops took 1.001 sec, avg 19.621 ms, 50.966 ops/sec
RSA 2048 Priv OAEP 8 ops took 1.073 sec, avg 134.182 ms, 7.453 ops/sec
ECC 256 key gen 20 ops took 1.037 sec, avg 51.871 ms, 19.279 ops/sec
ECDSA 256 sign 43 ops took 1.006 sec, avg 23.399 ms, 42.736 ops/sec
ECDSA 256 verify 28 ops took 1.030 sec, avg 36.785 ms, 27.185 ops/sec
ECDHE 256 agree 26 ops took 1.010 sec, avg 38.847 ms, 25.742 ops/sec
Run on Nuvoton NPCT650:
./examples/bench/bench
TPM2 Benchmark using Wrapper API's
RNG 8 KB took 1.291 seconds, 6.197 KB/s
Benchmark symmetric AES-128-CBC-enc not supported!
Benchmark symmetric AES-128-CBC-dec not supported!
Benchmark symmetric AES-256-CBC-enc not supported!
Benchmark symmetric AES-256-CBC-dec not supported!
Benchmark symmetric AES-256-CTR-enc not supported!
Benchmark symmetric AES-256-CTR-dec not supported!
Benchmark symmetric AES-256-CFB-enc not supported!
Benchmark symmetric AES-256-CFB-dec not supported!
SHA1 90 KB took 1.005 seconds, 89.530 KB/s
SHA256 90 KB took 1.010 seconds, 89.139 KB/s
RSA 2048 key gen 8 ops took 35.833 sec, avg 4479.152 ms, 0.223 ops/sec
RSA 2048 Public 77 ops took 1.007 sec, avg 13.078 ms, 76.463 ops/sec
RSA 2048 Private 2 ops took 1.082 sec, avg 540.926 ms, 1.849 ops/sec
RSA 2048 Pub OAEP 53 ops took 1.005 sec, avg 18.961 ms, 52.739 ops/sec
RSA 2048 Priv OAEP 2 ops took 1.088 sec, avg 544.075 ms, 1.838 ops/sec
ECC 256 key gen 7 ops took 1.033 sec, avg 147.608 ms, 6.775 ops/sec
ECDSA 256 sign 6 ops took 1.141 sec, avg 190.149 ms, 5.259 ops/sec
ECDSA 256 verify 4 ops took 1.061 sec, avg 265.216 ms, 3.771 ops/sec
ECDHE 256 agree 6 ops took 1.055 sec, avg 175.915 ms, 5.685 ops/sec
Run on Nuvoton NPCT750 at 43MHz:
RNG 16 KB took 1.114 seconds, 14.368 KB/s
Benchmark symmetric AES-128-CBC-enc not supported!
Benchmark symmetric AES-128-CBC-dec not supported!
Benchmark symmetric AES-256-CBC-enc not supported!
Benchmark symmetric AES-256-CBC-dec not supported!
SHA1 120 KB took 1.012 seconds, 118.618 KB/s
SHA256 122 KB took 1.012 seconds, 120.551 KB/s
SHA384 120 KB took 1.003 seconds, 119.608 KB/s
RSA 2048 key gen 5 ops took 17.043 sec, avg 3408.678 ms, 0.293 ops/sec
RSA 2048 Public 134 ops took 1.004 sec, avg 7.490 ms, 133.517 ops/sec
RSA 2048 Private 15 ops took 1.054 sec, avg 70.261 ms, 14.233 ops/sec
RSA 2048 Pub OAEP 116 ops took 1.002 sec, avg 8.636 ms, 115.797 ops/sec
RSA 2048 Priv OAEP 15 ops took 1.061 sec, avg 70.716 ms, 14.141 ops/sec
ECC 256 key gen 12 ops took 1.008 sec, avg 84.020 ms, 11.902 ops/sec
ECDSA 256 sign 18 ops took 1.015 sec, avg 56.399 ms, 17.731 ops/sec
ECDSA 256 verify 26 ops took 1.018 sec, avg 39.164 ms, 25.533 ops/sec
ECDHE 256 agree 35 ops took 1.029 sec, avg 29.402 ms, 34.011 ops/sec
./examples/native/native_test
TPM2 Demo using Native API's
TPM2: Caps 0x30000495, Did 0x0000, Vid 0x104a, Rid 0x4e
TPM2_Startup pass
TPM2_SelfTest pass
TPM2_GetTestResult: Size 12, Rc 0x0
TPM2_IncrementalSelfTest: Rc 0x0, Alg 0x1 (Todo 0)
TPM2_GetCapability: Property FamilyIndicator 0x322e3000
TPM2_GetCapability: Property PCR Count 24
TPM2_GetCapability: Property FIRMWARE_VERSION_1 0x004a0008
TPM2_GetCapability: Property FIRMWARE_VERSION_2 0x44a01587
TPM2_GetRandom: Got 32 bytes
TPM2_StirRandom: success
TPM2_PCR_Read: Index 0, Count 1
TPM2_PCR_Read: Index 0, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 1, Count 1
TPM2_PCR_Read: Index 1, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 2, Count 1
TPM2_PCR_Read: Index 2, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 3, Count 1
TPM2_PCR_Read: Index 3, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 4, Count 1
TPM2_PCR_Read: Index 4, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 5, Count 1
TPM2_PCR_Read: Index 5, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 6, Count 1
TPM2_PCR_Read: Index 6, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 7, Count 1
TPM2_PCR_Read: Index 7, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 8, Count 1
TPM2_PCR_Read: Index 8, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 9, Count 1
TPM2_PCR_Read: Index 9, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 10, Count 1
TPM2_PCR_Read: Index 10, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 11, Count 1
TPM2_PCR_Read: Index 11, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 12, Count 1
TPM2_PCR_Read: Index 12, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 13, Count 1
TPM2_PCR_Read: Index 13, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 14, Count 1
TPM2_PCR_Read: Index 14, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 15, Count 1
TPM2_PCR_Read: Index 15, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 16, Count 1
TPM2_PCR_Read: Index 16, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 17, Count 1
TPM2_PCR_Read: Index 17, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 18, Count 1
TPM2_PCR_Read: Index 18, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 19, Count 1
TPM2_PCR_Read: Index 19, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 20, Count 1
TPM2_PCR_Read: Index 20, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 21, Count 1
TPM2_PCR_Read: Index 21, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 22, Count 1
TPM2_PCR_Read: Index 22, Digest Sz 32, Update Counter 20
TPM2_PCR_Read: Index 23, Count 1
TPM2_PCR_Read: Index 23, Digest Sz 32, Update Counter 20
TPM2_PCR_Extend success
TPM2_PCR_Read: Index 0, Count 1
TPM2_PCR_Read: Index 0, Digest Sz 32, Update Counter 21
TPM2_StartAuthSession: sessionHandle 0x3000000
TPM2_PolicyGetDigest: size 32
TPM2_PCR_Read: Index 0, Digest Sz 20, Update Counter 21
wc_Hash of PCR[0]: size 32
TPM2_PolicyPCR failed 0x1c4: TPM_RC_AUTHSIZE
TPM2_PolicyRestart: Done
TPM2_HashSequenceStart: sequenceHandle 0x80000000
Hash SHA256 test success
TPM2_CreatePrimary: Endorsement 0x80000000 (314 bytes)
TPM2_CreatePrimary: Storage 0x80000002 (282 bytes)
TPM2_LoadExternal: 0x80000004
TPM2_MakeCredential: credentialBlob 68, secret 256
TPM2_ReadPublic Handle 0x80000004: pub 314, name 34, qualifiedName 34
Create HMAC-SHA256 Key success, public 48, Private 137
TPM2_Load New HMAC Key Handle 0x80000004
TPM2_PolicyCommandCode: success
TPM2_ObjectChangeAuth: private 137
TPM2_ECC_Parameters: CurveID 3, sz 256, p 32, a 32, b 32, gX 32, gY 32, n 32, h 1
TPM2_Create: New ECDSA Key: pub 88, priv 126
TPM2_Load ECDSA Key Handle 0x80000004
TPM2_Sign: ECC S 32, R 32
TPM2_VerifySignature: Tag 32802
TPM2_Create: New ECDH Key: pub 88, priv 126
TPM2_Load ECDH Key Handle 0x80000004
TPM2_ECDH_KeyGen: zPt 68, pubPt 68
TPM2_ECDH_ZGen: zPt 68
TPM2 ECC Shared Secret Pass
TPM2_Create: New RSA Key: pub 278, priv 222
TPM2_Load RSA Key Handle 0x80000004
TPM2_RSA_Encrypt: 256
TPM2_RSA_Decrypt: 68
RSA Encrypt/Decrypt test passed
TPM2_NV_DefineSpace: 0x1bfffff
TPM2_NV_ReadPublic: Sz 14, Idx 0x1bfffff, nameAlg 11, Attr 0x2020002, authPol 0, dataSz 32, name 34
Create AES128 CFB Key success, public 50, Private 142
TPM2_Load New AES Key Handle 0x80000004
Encrypt/Decrypt test success
./examples/csr/csr
TPM2 CSR Example
Generated/Signed Cert (DER 860, PEM 1236)
-----BEGIN CERTIFICATE REQUEST-----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-----END CERTIFICATE REQUEST-----
Generated/Signed Cert (DER 467, PEM 704)
-----BEGIN CERTIFICATE REQUEST-----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-----END CERTIFICATE REQUEST-----
./examples/pkcs7/pkcs7
TPM2 PKCS7 Example
PKCS7 Signed Container 1625
PKCS7 Container Verified (using TPM)
PKCS7 Container Verified (using software)
The wolfSSL TLS client requires loading a public key to indicate mutual authentication is used. The crypto callback uses the TPM for the private key signing.
./examples/tls/tls_client
TPM2 TLS Client Example
Write (29): GET /index.html HTTP/1.0
Read (193): HTTP/1.1 200 OK
Content-Type: text/html
Connection: close
<html>
<head>
<title>Welcome to wolfSSL!</title>
</head>
<body>
<p>wolfSSL has successfully performed handshake!</p>
</body>
</html>
The wolfSSL TLS server loads the TPM public key and the crypto callback uses the TPM for the private key signing.
./examples/tls/tls_server
TPM2 TLS Server Example
Loading RSA certificate and public key
Read (29): GET /index.html HTTP/1.0
Write (193): HTTP/1.1 200 OK
Content-Type: text/html
Connection: close
<html>
<head>
<title>Welcome to wolfSSL!</title>
</head>
<body>
<p>wolfSSL has successfully performed handshake!</p>
</body>
</html>
- Update to v1.59 of specification (adding CertifyX509)
- Inner wrap support for SensitiveToPrivate.
Email us at [email protected].