Skip to content
forked from LouWii/ErgoMax

Custom ergo split keyboard project, based on ErgoDox, with hot swap sockets

License

Notifications You must be signed in to change notification settings

freemmer/ErgoMax

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

87 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ErgoMax

The ErgoMax is a split ergonomic keyboard.

It is based on the ErgoDox, a popular split ergonomic keyboard (learn more).

It's main features/differences are:

  • extra top row for F1-F12 keys
  • hot-swappable switches
  • uses 2 ProMicro controllers (one for each side), allowing for fully independent boards if needed
  • 2 PCB versions available (separate left/right PCBs, or reversible PCB for both)

This project is not complete and some work still needs to be done.

Layout

While a lot of mechanical keyboard users seem to prefer simplistic, minimal keyboards, the ErgoMax goes the opposite way.

The layout is the same as the ErgoDox, with an extra top row for F1 to F12 keys, adding more room for activites.

Hotswap - change switches whenever you want

The keyboard PCB has been designed to use Kailh MX hotswap sockets. You won't be able to solder the switches directly on the PCBs, you must use Kaihl MX sockets.

Switches will plug into the sockets, meaning no solder required for them, and most importantly, meaning that you can remove them and change them easily (hence the hotswap...).

Controller

Each side of the keyboard is controlled via a ProMicro, which is a cheap, small Arduino compatible board running on an ATmega32u4.

The 2 sides can be connected via a 3.5mm jack, just like the original ErgoDox. However, as the 2 sides posess their own ProMicro, that means they can also be working totally independently if needed.

One downside here is that almost all pins of the ProMicro are used (only 2 remaining), making it impossible to add extra add-ons to the keyboard. Sadly, no RGB... as of right now.

Jack connector

I tried to use the same 3.5mm TRRS jack socket as the original ErgoDox, which is a CP-43514. But it's not super common, so I changed it for a PJ320A (same as MJ-4PP-9).

Firmware

Firmware Document

Third party Libraries

We are using several libraries in this project.

3D models

Kicad can generate nice 3D previews of PCBs and their components.

As we're using components that are not included in KiCad 3d templates, you'll need to add the next models into your KiCad template folder. On Windows, it's C:\Users\YOURNAME\kicad\template, on OSX it's /Users/YOURNAME/kicad/template. If the folder doesn't exist, create it.

The 3D models of the hotswap sockets can be found there: https://github.com/qmk/qmk_hardware. Copy kailh_socket_mx.stp into your KiCad template folder.

I couldn't find a 3D model for the PJ320A jack connector. The closest I found is this https://www.cui.com/product/resource/3dmodel/sj2-3574a-smt-tr, which gives a good preview of a real PJ320A. Copy CUI_SJ2-3574A-SMT-TR.step into your KiCad template folder.

I modified this MX Switch 3D model https://grabcad.com/library/cherry-mx-switches-mx-1 and included it in the libs/3dmodels folder of the project as MX-clean-ergomax.step.

I also modified a 2U stabilizer model that I found there https://grabcad.com/library/cherry-mx-stabilizer-mx-1. The file is also included in the libs/3dmodels folder of the project as Stabilizer-closed-ergomax.step.

I once again modified a ProMicro 3D model https://grabcad.com/library/arduino-pro-micro-1. The file is called Pro-micro-clean-ergomax.step and is stored in libs/3dmodels.

Assembly

Assembly document

Print the PCBs

Here are some manufacturers that can print PCBs for you. They are not in any particular order and I don't have any partnership of any sort either.

About

Custom ergo split keyboard project, based on ErgoDox, with hot swap sockets

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published