smart-apply-patch.sh

#!/usr/bin/env bash
#   Licensed under the Apache License, Version 2.0 (the "License");
#   you may not use this file except in compliance with the License.
#   You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
#   Unless required by applicable law or agreed to in writing, software
#   distributed under the License is distributed on an "AS IS" BASIS,
#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#   See the License for the specific language governing permissions and
#   limitations under the License.

#
# Determine if the patch file is a git diff file with prefixes.
# These files are generated via "git diff" *without* the --no-prefix option.
#
# We can apply these patches more easily because we know that the a/ and b/
# prefixes in the "diff" lines stands for the project root directory.
# So we don't have to hunt for the project root.
# And of course, we know that the patch file was generated using git, so we
# know git apply can handle it properly.
#
# Arguments: file name.
# Return: 0 if it is a git diff; 1 otherwise.
#
is_git_diff_with_prefix() {
  DIFF_TYPE="unknown"
  while read -r line; do
    if [[ "$line" =~ ^diff\  ]]; then
      if [[ "$line" =~ ^diff\ \-\-git ]]; then
        DIFF_TYPE="git"
      else
        return 1 # All diff lines must be diff --git lines.
      fi
    fi
    if [[ "$line" =~ ^\+\+\+\  ]] ||
       [[ "$line" =~ ^\-\-\-\  ]]; then
      if ! [[ "$line" =~ ^....[ab]/ || "$line" =~ ^..../dev/null ]]; then
        return 1 # All +++ and --- lines must start with a/ or b/ or be /dev/null.
      fi
    fi
  done < $1
  [ x$DIFF_TYPE == x"git" ] || return 1
  return 0 # return true (= 0 in bash)
}

PATCH_FILE=$1
DRY_RUN=$2
if [ -z "$PATCH_FILE" ]; then
  echo usage: $0 patch-file
  exit 1
fi

TMPDIR=${TMPDIR:-/tmp}
PATCH=${PATCH:-patch} # allow overriding patch binary

# Cleanup handler for temporary files
TOCLEAN=""
cleanup() {
  rm $TOCLEAN
  exit $1
}
trap "cleanup 1" HUP INT QUIT TERM

# Allow passing "-" for stdin patches
if [ "$PATCH_FILE" == "-" ]; then
  PATCH_FILE="$TMPDIR/smart-apply.in.$RANDOM"
  cat /dev/fd/0 > $PATCH_FILE
  TOCLEAN="$TOCLEAN $PATCH_FILE"
fi

ISSUE_RE='^(HADOOP|YARN|MAPREDUCE|HDFS)-[0-9]+$'
if [[ ${PATCH_FILE} =~ ^http || ${PATCH_FILE} =~ ${ISSUE_RE} ]]; then
  # Allow downloading of patches
  PFILE="$TMPDIR/smart-apply.in.$RANDOM"
  TOCLEAN="$TOCLEAN $PFILE"
  if [[ ${PATCH_FILE} =~ ^http ]]; then
    patchURL="${PATCH_FILE}"
  else # Get URL of patch from JIRA
    wget -q -O "${PFILE}" "http://issues.apache.org/jira/browse/${PATCH_FILE}"
    if [[ $? != 0 ]]; then
      echo "Unable to determine what ${PATCH_FILE} may reference." 1>&2
      cleanup 1
    elif [[ $(grep -c 'Patch Available' "${PFILE}") == 0 ]]; then
      echo "${PATCH_FILE} is not \"Patch Available\".  Exiting." 1>&2
      cleanup 1
    fi
    relativePatchURL=$(grep -o '"/jira/secure/attachment/[0-9]*/[^"]*' "${PFILE}" | grep -v -e 'htm[l]*$' | sort | tail -1 | grep -o '/jira/secure/attachment/[0-9]*/[^"]*')
    patchURL="http://issues.apache.org${relativePatchURL}"
  fi
  if [[ -n $DRY_RUN ]]; then
    echo "Downloading ${patchURL}"
  fi
  wget -q -O "${PFILE}" "${patchURL}"
  if [[ $? != 0 ]]; then
    echo "${PATCH_FILE} could not be downloaded." 1>&2
    cleanup 1
  fi
  PATCH_FILE="${PFILE}"
fi

# Special case for git-diff patches without --no-prefix
if is_git_diff_with_prefix "$PATCH_FILE"; then
  GIT_FLAGS="--binary -p1 -v"
  if [[ -z $DRY_RUN ]]; then
      GIT_FLAGS="$GIT_FLAGS --stat --apply "
      echo Going to apply git patch with: git apply "${GIT_FLAGS}"
  else
      GIT_FLAGS="$GIT_FLAGS --check "
  fi
  git apply ${GIT_FLAGS} "${PATCH_FILE}"
  exit $?
fi

# Come up with a list of changed files into $TMP
TMP="$TMPDIR/smart-apply.paths.$RANDOM"
TOCLEAN="$TOCLEAN $TMP"

if $PATCH -p0 -E --dry-run < $PATCH_FILE 2>&1 > $TMP; then
  PLEVEL=0
  #if the patch applied at P0 there is the possability that all we are doing
  # is adding new files and they would apply anywhere. So try to guess the
  # correct place to put those files.

  TMP2="$TMPDIR/smart-apply.paths.2.$RANDOM"
  TOCLEAN="$TOCLEAN $TMP2"

  egrep '^patching file |^checking file ' $TMP | awk '{print $3}' | grep -v /dev/null | sort -u > $TMP2

  if [ ! -s $TMP2 ]; then
    echo "Error: Patch dryrun couldn't detect changes the patch would make. Exiting."
    cleanup 1
  fi

  #first off check that all of the files do not exist
  FOUND_ANY=0
  for CHECK_FILE in $(cat $TMP2)
  do
    if [[ -f $CHECK_FILE ]]; then
      FOUND_ANY=1
    fi
  done

  if [[ "$FOUND_ANY" = "0" ]]; then
    #all of the files are new files so we have to guess where the correct place to put it is.

    # if all of the lines start with a/ or b/, then this is a git patch that
    # was generated without --no-prefix
    if ! grep -qv '^a/\|^b/' $TMP2 ; then
      echo Looks like this is a git patch. Stripping a/ and b/ prefixes
      echo and incrementing PLEVEL
      PLEVEL=$[$PLEVEL + 1]
      sed -i -e 's,^[ab]/,,' $TMP2
    fi

    PREFIX_DIRS_AND_FILES=$(cut -d '/' -f 1 $TMP2 | sort -u)
 
    # if we are at the project root then nothing more to do
    if [[ -d hadoop-common-project ]]; then
      echo Looks like this is being run at project root

    # if all of the lines start with hadoop-common/, hadoop-hdfs/, hadoop-yarn/ or hadoop-mapreduce/, this is
    # relative to the hadoop root instead of the subproject root, so we need
    # to chop off another layer
    elif [[ "$PREFIX_DIRS_AND_FILES" =~ ^(hadoop-common-project|hadoop-hdfs-project|hadoop-yarn-project|hadoop-mapreduce-project)$ ]]; then

      echo Looks like this is relative to project root. Increasing PLEVEL
      PLEVEL=$[$PLEVEL + 1]

    elif ! echo "$PREFIX_DIRS_AND_FILES" | grep -vxq 'hadoop-common-project\|hadoop-hdfs-project\|hadoop-yarn-project\|hadoop-mapreduce-project' ; then
      echo Looks like this is a cross-subproject patch. Try applying from the project root
      cleanup 1
    fi
  fi
elif $PATCH -p1 -E --dry-run < $PATCH_FILE 2>&1 > /dev/null; then
  PLEVEL=1
elif $PATCH -p2 -E --dry-run < $PATCH_FILE 2>&1 > /dev/null; then
  PLEVEL=2
else
  echo "The patch does not appear to apply with p0 to p2";
  cleanup 1;
fi

# If this is a dry run then exit instead of applying the patch
if [[ -n $DRY_RUN ]]; then
  cleanup 0;
fi

echo Going to apply patch with: $PATCH -p$PLEVEL
$PATCH -p$PLEVEL -E < $PATCH_FILE

cleanup $?