howto-data-in-replication.md

title	description	services	author	ms.author	manager	editor	ms.service	ms.topic	ms.date
Configure Data-in Replication to replicate data into Azure Database for MySQL.	This article describes how to set up Data-in Replication for Azure Database for MySQL.	mysql	ajlam	andrela	kfile	jasonwhowell	mysql	article	08/31/2018

How to configure Azure Database for MySQL Data-in Replication

In this article, you will learn how to set up Data-in Replication in the Azure Database for MySQL service by configuring the master and replica servers. Data-in Replication allows you to synchronize data from a master MySQL server running on-premises, in virtual machines, or database services hosted by other cloud providers into a replica in the Azure Database for MySQL service.

This article assumes that you have at least some prior experience with MySQL servers and databases.

Create a MySQL server to be used as replica

1. Create a new Azure Database for MySQL server

   Create a new MySQL server (ex. "replica.mysql.database.azure.com"). Refer to Create an Azure Database for MySQL server by using the Azure portal for server creation. This server is the "replica" server in Data-in Replication.

   [!IMPORTANT] The Azure Database for MySQL server must be created in the General Purpose or Memory Optimized pricing tiers.

2. Create same user accounts and corresponding privileges

   User accounts are not replicated from the master server to the replica server. If you plan on providing users with access to the replica server, you need to manually create all accounts and corresponding privileges on this newly created Azure Database for MySQL server.

Configure the master server

The following steps prepare and configure the MySQL server hosted on-premises, in a virtual machine, or database service hosted by other cloud providers for Data-in Replication. This server is the "master" in Data-in replication.

1. Turn on binary logging

   Check to see if binary logging has been enabled on the master by running the following command:

   SHOW VARIABLES LIKE 'log_bin';

   If the variable log_bin is returned with the value “ON", binary logging is enabled on your server.

   If log_bin is returned with the value “OFF”, turn on binary logging by editing your my.cnf file so that log_bin=ON and restart your server for the change to take effect.

2. Master server settings

   Data-in Replication requires parameter lower_case_table_names to be consistent between the master and replica servers. This parameter is 1 by default in Azure Database for MySQL.

   SET GLOBAL lower_case_table_names = 1;

3. Create a new replication role and set up permission

   Create a user account on the master server that is configured with replication privileges. This can be done through SQL commands or a tool like MySQL Workbench. Consider whether you plan on replicating with SSL as this will need to be specified when creating the user. Refer to the MySQL documentation to understand how to add user accounts on your master server.

   In the commands below, the new replication role created is able to access the master from any machine, not just the machine that hosts the master itself. This is done by specifying "syncuser@'%'" in the create user command. See the MySQL documentation to learn more about specifying account names.

   SQL Command

   Replication with SSL

   To require SSL for all user connections, use the following command to create a user:

   CREATE USER 'syncuser'@'%' IDENTIFIED BY 'yourpassword';
   GRANT REPLICATION SLAVE ON *.* TO ' syncuser'@'%' REQUIRE SSL;

   Replication without SSL

   If SSL is not required for all connections, use the following command to create a user:

   CREATE USER 'syncuser'@'%' IDENTIFIED BY 'yourpassword';
   GRANT REPLICATION SLAVE ON *.* TO ' syncuser'@'%';

   MySQL Workbench

   To create the replication role in MySQL Workbench, open the Users and Privileges panel from the Management panel. Then click on Add Account.

   

   Type in the username into the Login Name field.

   

   Click on the Administrative Roles panel and then select Replication Slave from the list of Global Privileges. Then click on Apply to create the replication role.

   

4. Set the master server to read-only mode

   Before starting to dump out the database, the server needs to be placed in read-only mode. While in read-only mode, the master will be unable to process any write transactions. Evaluate the impact to your business and schedule the read-only window in an off-peak time if necessary.

   FLUSH TABLES WITH READ LOCK;
   SET GLOBAL read_only = ON;

5. Get binary log file name and offset

   Run the show master status command to determine the current binary log file name and offset.

   show master status;

   The results should be like following. Make sure to note the binary file name as it will be used in later steps.

   

Dump and restore master server

1. Dump all databases from master server

   You can use mysqldump to dump databases from your master. For details, refer to Dump & Restore. It is unnecessary to dump MySQL library and test library.

2. Set master server to read/write mode

   Once the database has been dumped, change the master MySQL server back to read/write mode.

   SET GLOBAL read_only = OFF;
   UNLOCK TABLES;

3. Restore dump file to new server

   Restore the dump file to the server created in the Azure Database for MySQL service. Refer to Dump & Restore for how to restore a dump file to a MySQL server. If the dump file is large, upload it to a virtual machine in Azure within the same region as your replica server. Restore it to the Azure Database for MySQL server from the virtual machine.

Link master and replica servers to start Data-in Replication

1. Set master server

   All Data-in Replication functions are done by stored procedures. You can find all procedures at Data-in Replication Stored Procedures. The stored procedures can be run in the MySQL shell or MySQL Workbench.

   To link two servers and start replication, login to the target replica server in the Azure DB for MySQL service and set the external instance as the master server. This is done by using the mysql.az_replication_change_master stored procedure on the Azure DB for MySQL server.

   CALL mysql.az_replication_change_master('<master_host>', '<master_user>', '<master_password>', 3306, '<master_log_file>', <master_log_pos>, '<master_ssl_ca>');

   • master_host: hostname of the master server
   • master_user: username for the master server
   • master_password: password for the master server
   • master_log_file: binary log file name from running show master status
   • master_log_pos: binary log position from running show master status
   • master_ssl_ca: CA certificate’s context. If not using SSL, pass in empty string.
     • It is recommended to pass this parameter in as a variable. See the following examples for more information.

Note

If the master server is hosted in an Azure VM, set "Allow access to Azure services" to "ON" to allow the master and replica servers to communicate with each other. This setting can be changed from the Connection security options. Refer to manage firewall rules using portal for more information.

Examples

Replication with SSL

The variable @cert is created by running the following MySQL commands:

SET @cert = '-----BEGIN CERTIFICATE-----
PLACE YOUR PUBLIC KEY CERTIFICATE’S CONTEXT HERE
-----END CERTIFICATE-----'

Replication with SSL is set up between a master server hosted in the domain “companya.com” and a replica server hosted in Azure Database for MySQL. This stored procedure is run on the replica.

CALL mysql.az_replication_change_master('master.companya.com', 'syncuser', 'P@ssword!', 3306, 'mysql-bin.000002', 120, @cert);

Replication without SSL

Replication without SSL is set up between a master server hosted in the domain “companya.com” and a replica server hosted in Azure Database for MySQL. This stored procedure is run on the replica.

CALL mysql.az_replication_change_master('master.companya.com', 'syncuser', 'P@ssword!', 3306, 'mysql-bin.000002', 120, '');

2. Start replication

   Call the mysql.az_replication_start stored procedure to initiate replication.

   CALL mysql.az_replication_start;

3. Check replication status

   Call the show slave status command on the replica server to view the replication status.

   show slave status;

   If the state of Slave_IO_Running and Slave_SQL_Running are "yes" and the value of Seconds_Behind_Master is “0”, replication is working well. Seconds_Behind_Master indicates how late the replica is. If the value is not "0", it means that the replica is processing updates.

Other stored procedures

Stop replication

To stop replication between the master and replica server, use the following stored procedure:

CALL mysql.az_replication_stop;

Remove replication relationship

To remove the relationship between master and replica server, use the following stored procedure:

CALL mysql.az_replication_remove_master;

Skip replication error

To skip a replication error and allow replication to proceed, use the following stored procedure:

CALL mysql.az_replication_skip_counter;

Next steps

• Learn more about Data-in Replication for Azure Database for MySQL.