tutorial-create-route-table-portal.md

title	description	services	documentationcenter	author	manager	editor	tags	Customer intent	ms.assetid	ms.service	ms.devlang	ms.topic	ms.tgt_pltfrm	ms.workload	ms.date	ms.author	ms.custom
Route network traffic - tutorial - Azure portal | Microsoft Docs	In this tutorial, learn how to route network traffic with a route table using the Azure portal.	virtual-network	virtual-network	jimdial	jeconnoc		azure-resource-manager	I want to route traffic from one subnet, to a different subnet, through a network virtual appliance.		virtual-network	azurecli	tutorial	virtual-network	infrastructure	03/13/2018	jdial	mvc

Tutorial: Route network traffic with a route table using the Azure portal

Azure automatically routes traffic between all subnets within a virtual network, by default. You can create your own routes to override Azure's default routing. The ability to create custom routes is helpful if, for example, you want to route traffic between subnets through a network virtual appliance (NVA). In this tutorial, you learn how to:

[!div class="checklist"]

• Create a route table
• Create a route
• Create a virtual network with multiple subnets
• Associate a route table to a subnet
• Create an NVA that routes traffic
• Deploy virtual machines (VM) into different subnets
• Route traffic from one subnet to another through an NVA

If you prefer, you can complete this tutorial using the Azure CLI or Azure PowerShell.

If you don't have an Azure subscription, create a free account before you begin.

Log in to Azure

Log in to the Azure portal at http://portal.azure.com.

Create a route table

1. Select + Create a resource on the upper, left corner of the Azure portal.

2. Select Networking, and then select Route table.

3. Enter, or select, the following information, accept the default for the remaining setting, and then select Create:

   Setting	Value
   Name	myRouteTablePublic
   Subscription	Select your subscription.
   Resource group	Select Create new and enter myResourceGroup.
   Location	East US

   

Create a route

1. In the Search resources, services, and docs box at the top of the portal, begin typing myRouteTablePublic. When myRouteTablePublic appears in the search results, select it.

2. Under SETTINGS, select Routes and then select + Add, as shown in the following picture:

   

3. Under Add route, enter, or select, the following information, accept the default for the remaining settings, and then select Create:

   Setting	Value
   Route name	ToPrivateSubnet
   Address prefix	10.0.1.0/24
   Next hop type	Select Virtual appliance.
   Next hop address	10.0.2.4

Associate a route table to a subnet

Before you can associate a route table to a subnet, you have to create a virtual network and subnet, then you can associate the route table to a subnet:

1. Select + Create a resource on the upper, left corner of the Azure portal.

2. Select Networking, and then select Virtual network.

3. Under Create virtual network, Enter, or select, the following information, accept the default for the remaining settings, and then select Create:

   Setting	Value
   Name	myVirtualNetwork
   Address space	10.0.0.0/16
   Subscription	Select your subscription.
   Resource group	Select Use existing and then select myResourceGroup.
   Location	Select East US
   Subnet name	Public
   Address range	10.0.0.0/24

4. In the Search resources, services, and docs box at the top of the portal, begin typing myVirtualNetwork. When myVirtualNetwork appears in the search results, select it.

5. Under SETTINGS, select Subnets and then select + Subnet, as shown in the following picture:

   

6. Select or enter the following information, then select OK:

   Setting	Value
   Name	Private
   Address space	10.0.1.0/24

7. Complete steps 5 and 6 again, providing the following information:

   Setting	Value
   Name	DMZ
   Address space	10.0.2.0/24

8. The myVirtualNetwork - Subnets box is displayed after completing the previous step. Under SETTINGS, select Subnets and then select Public.

9. As shown in the following picture, select Route table, select MyRouteTablePublic, and then select Save:

   

Create an NVA

An NVA is a VM that performs a network function, such as routing, firewalling, or WAN optimization.

1. Select + Create a resource on the upper, left corner of the Azure portal.

2. Select Compute, and then select Windows Server 2016 Datacenter. You can select a different operating system, but the remaining steps assume you selected Windows Server 2016 Datacenter.

3. Select or enter the following information for Basics, then select OK:

   Setting	Value
   Name	myVmNva
   User name	Enter a user name of your choosing.
   Password	Enter a password of your choosing. The password must be at least 12 characters long and meet the defined complexity requirements.
   Resource group	Select Use existing and then select myResourceGroup.
   Location	Select East US.

4. Select a VM size under Choose a size.

5. Select or enter the following information for Settings, then select OK:

   Setting	Value
   Virtual network	myVirtualNetwork - If it's not selected, select Virtual network, then select myVirtualNetwork under Choose virtual network.
   Subnet	Select Subnet and then select DMZ under Choose subnet.
   Public IP address	Select Public IP address and select None under Choose public IP address. No public IP address is assigned to this VM since it won't be connected to from the internet.

6. Under Create in the Summary, select Create to start the VM deployment.

   The VM takes a few minutes to create. Do not continue to the next step until Azure finishes creating the VM and opens a box with information about the VM.

7. In the box that opened for the VM after it was created, under SETTINGS, select Networking, and then select myvmnva158 (the network interface Azure created for your VM has a different number after myvmnva), as shown in the following picture:

   

8. For a network interface to be able to forward network traffic sent to it, that is not destined for its own IP address, IP forwarding must be enabled for the network interface. Under SETTINGS, select IP configurations, select Enabled for IP forwarding, and then select Save, as shown in the following picture:

   

Create virtual machines

Create two VMs in the virtual network, so that you can validate that traffic from the Public subnet is routed to the Private subnet through the NVA in a later step. Complete steps 1-6 of Create a NVA. Use the same settings in steps 3 and 5, except for the following changes:

Virtual machine name	Subnet	Public IP address
myVmPublic	Public	Accept portal default
myVmPrivate	Private	Accept portal default

You can create the myVmPrivate VM while Azure creates the myVmPublic VM. Do not continue with the following steps until Azure finishes creating both VMs.

Route traffic through an NVA

1. In the Search box at the top of the portal, begin typing myVmPrivate. When the myVmPrivate VM appears in the search results, select it.

2. Create a remote desktop connection to the myVmPrivate VM by selecting Connect, as shown in the following picture:

   

3. To connect to the VM, open the downloaded RDP file. If prompted, select Connect.

4. Enter the user name and password you specified when creating the VM (you may need to select More choices, then Use a different account, to specify the credentials you entered when you created the VM), then select OK.

5. You may receive a certificate warning during the sign-in process. Select Yes to proceed with the connection.

6. In a later step, the trace route tool is used to test routing. Trace route uses the Internet Control Message Protocol (ICMP), which is denied through the Windows Firewall. Enable ICMP through the Windows firewall by entering the following command from PowerShell on the myVmPrivate VM:

   New-NetFirewallRule –DisplayName “Allow ICMPv4-In” –Protocol ICMPv4

   Though trace route is used to test routing in this tutorial, allowing ICMP through the Windows Firewall for production deployments is not recommended.

7. You enabled IP forwarding within Azure for the VM's network interface in Enable IP forwarding. Within the VM, the operating system, or an application running within the VM, must also be able to forward network traffic. Enable IP forwarding within the operating system of the myVmNva VM:

   From a command prompt on the myVmPrivate VM, remote desktop to the myVmNva VM:

   mstsc /v:myvmnva
   

   To enable IP forwarding within the operating system, enter the following command in PowerShell from the myVmNva VM:

   Set-ItemProperty -Path HKLM:\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters -Name IpEnableRouter -Value 1

   Restart the myVmNva VM, which also disconnects the remote desktop session.

8. While still connected to the myVmPrivate VM, create a remote desktop session to the myVmPublic VM, after the myVmNva VM restarts:

   mstsc /v:myVmPublic
   

   Enable ICMP through the Windows firewall by entering the following command from PowerShell on the myVmPublic VM:

   New-NetFirewallRule –DisplayName “Allow ICMPv4-In” –Protocol ICMPv4

9. To test routing of network traffic to the myVmPrivate VM from the myVmPublic VM, enter the following command from PowerShell on the myVmPublic VM:

   tracert myVmPrivate
   

   The response is similar to the following example:

   Tracing route to myVmPrivate.vpgub4nqnocezhjgurw44dnxrc.bx.internal.cloudapp.net [10.0.1.4]
   over a maximum of 30 hops:
       
   1    <1 ms     *        1 ms  10.0.2.4
   2     1 ms     1 ms     1 ms  10.0.1.4
       
   Trace complete.
   

   You can see that the first hop is 10.0.2.4, which is the NVA's private IP address. The second hop is 10.0.1.4, the private IP address of the myVmPrivate VM. The route added to the myRouteTablePublic route table and associated to the Public subnet caused Azure to route the traffic through the NVA, rather than directly to the Private subnet.

10. Close the remote desktop session to the myVmPublic VM, which leaves you still connected to the myVmPrivate VM.

11. To test routing of network traffic to the myVmPublic VM from the myVmPrivate VM, enter the following command from a command prompt on the myVmPrivate VM:

    tracert myVmPublic
    

    The response is similar to the following example:

    Tracing route to myVmPublic.vpgub4nqnocezhjgurw44dnxrc.bx.internal.cloudapp.net [10.0.0.4]
    over a maximum of 30 hops:
    
    1     1 ms     1 ms     1 ms  10.0.0.4
    
    Trace complete.
    

    You can see that traffic is routed directly from the myVmPrivate VM to the myVmPublic VM. By default, Azure routes traffic directly between subnets.

12. Close the remote desktop session to the myVmPrivate VM.

Clean up resources

When no longer needed, delete the resource group and all resources it contains:

1. Enter myResourceGroup in the Search box at the top of the portal. When you see myResourceGroup in the search results, select it.
2. Select Delete resource group.
3. Enter myResourceGroup for TYPE THE RESOURCE GROUP NAME: and select Delete.

Next steps

In this tutorial, you created a route table and associated it to a subnet. You created a simple NVA that routed traffic from a public subnet to a private subnet. Deploy a variety of pre-configured NVAs that perform network functions such as firewall and WAN optimization from the Azure Marketplace. To learn more about routing, see Routing overview and Manage a route table.

While you can deploy many Azure resources within a virtual network, resources for some Azure PaaS services cannot be deployed into a virtual network. You can still restrict access to the resources of some Azure PaaS services to traffic only from a virtual network subnet though. To learn how to restrict network access to Azure PaaS resources, advance to the next tutorial.

[!div class="nextstepaction"] Restrict network access to PaaS resources