run_wml_tests

#!/bin/bash
#This script runs a sequence of wml unit test scenarios.
#Use -h to get help with usage.

usage()
{
  echo "Usage:" $0 "[OPTIONS] [EXTRA-ARGS]"
  echo "Executes a series of wml unit test scenarios found in a file."
  echo
  echo -e "Options:"
  echo -e "\t-h\tShows this help."
  echo -e "\t-v\tVerbose mode."
  echo -e "\t-w\tVery verbose mode. (Debug script.)"
  echo -e "\t-c\tClean mode. (Don't load any add-ons. Used for mainline tests.)"
  echo -e "\t-a arg\tAdditional arguments to go to wesnoth."
  echo -e "\t-t arg\tNew timer value to use, instead of 10s as default."
  echo -e "\t  \t0s means no timer, and also skips tests that expect timeout."
  echo -e "\t-s\tDisable strict mode. By default, we run wesnoth with option"
  echo -e "\t  \t'--log-strict=warning' to ensure errors result in a failed test."
  echo -e "\t-d\tRun wesnoth-debug binary instead of wesnoth."
  echo -e "\t-g\tIf we encounter a crash, generate a backtrace using gdb. Must have gdb installed for this option."
  echo -e "\t-p arg\tPath to wesnoth binary. By default assume it is with this script."
  if [ $(uname) = "Darwin" ]; then
  	echo -e "\t  \tThe special value xcode searches in XCode's DerivedProducts directory."
  fi
  echo -e "\t-l arg\tLoads list of tests from the given file."
  echo -e "\t  \tBy default, the file is wml_test_schedule."
  echo
  echo "Each line in the list of tests should be formatted:"
  echo -e "\n\t<expected return code> <name of unit test scenario>\n"
  echo "Lines beginning # are treated as comments."
  echo "Expected return codes:"
  for i in `seq 0 4`;
  do
    get_code_string $i
    echo -e "\t" $i "-" $CodeString
  done
  echo
  echo "Extra arguments besides these options are saved and passed on to wesnoth."
}

get_code_string()
{
  case ${1} in
  0)
    CodeString="PASS"
    ;;
  1) 
    CodeString="FAIL"
    ;;
  2)
    CodeString="FAIL (TIMEOUT)"
    ;;
  3)
    CodeString="FAIL (INVALID REPLAY)"
    ;;
  4)
    CodeString="FAIL (ERRORED REPLAY)"
    ;;
  124)
    CodeString="FAIL (TIMEOUT, by TERM signal)"
    ;;
  137)
    CodeString="FAIL (TIMEOUT, by KILL signal)"
    ;;
  134)
    CodeString="FAIL (ASSERTION FAILURE ? ? ?)"
    ;;
  139)
    CodeString="FAIL (SEGFAULT ? ? ?)"
    ;;
  *)
    CodeString="FAIL (? ? ?)"
    ;;
  esac
}

check_errs()
{
  # Argument 1 is the name of the test.
  # Argument 2 is the wesnoth error code for the test. 
  # Argument 3 is the expected error code.
  if [ "${2}" -eq 124 -a "${3}" -eq 2 ]; then
    if [ "$Verbose" -ge 2 ]; then
      echo "Caught return code 124 from timeout"
      echo "This signal means that the unix timeout utility killed wesnoth with TERM."
      echo "Since we expected timeout, the test passes."
    fi
    return 0
  elif [ "${2}" -eq 137 -a "${3}" -eq 2 ]; then
    if [ "$Verbose" -ge 2 ]; then
      echo "Caught return code 137 from timeout"
      echo "This signal means that the unix timeout utility killed wesnoth with KILL."
      echo "Since we expected timeout, the test passes."
    fi
    return 0
  elif [ "${2}" -ne "${3}" ]; then
    echo "${1}" ":" 
    get_code_string ${2}
    printf '%-55s %3d - %s\n' "  Observed result :" "${2}" "$CodeString"
    get_code_string ${3}
    printf '%-55s %3d - %s\n' "  Expected result :" "${3}" "$CodeString"
    if [ "$Verbose" -ge 2 -a -f "error.log" ]; then
      echo ""
      echo "Found error.log:"
      cat error.log
    fi
    return 1
  fi
  return 0
}

handle_error_log()
{
  if [ -f "error.log" ]; then
    if [ "${1}" -ne 0 ]; then
      if [ -f "errors.log" ]; then
        echo -e "\n--- next unit test ---\n" >> errors.log
        cat error.log >> errors.log
      else
        cp error.log errors.log
      fi
    fi

    rm error.log
  fi
}

run_test()
{
  # Argument 1 is the expected error code
  # Argument 2 is the name of the test scenario

  preopts=""
  binary="$BinPath"
  opts="-u $2 "

  timer=$basetimer

  if [ "$DebugMode" -eq 1 ]; then
    binary+="wesnoth-debug "
  else
    binary+="wesnoth "
  fi
  
  # Use validcache on tests that aren't the first test.
  if [ "$FirstTest" -eq 1 ]; then
    ((timer *= 2))
  else
    opts+="--validcache "
  fi

  # Add a timeout using unix timeout utility
  if [ $timer -gt 0 ]; then
    # Some versions might not support the --kill-after option
    if timeout --kill-after=5 1 read 2> /dev/null; then
      timer1=$((timer+1))
      preopts+="timeout --kill-after=$timer1 $timer "
    else
      preopts+="timeout $timer "
    fi
  elif [ $1 -eq 2 ]; then
    # If timeout is disabled, skip tests that expect it
    return 100
  fi

  # If running strict, then set strict level to "warning"
  if [ "$StrictMode" -eq 1 ]; then
    opts+="--log-strict=warning "
  fi

  # If running clean mode, then pass "--noaddons"
  if [ "$CleanMode" -eq 1 ]; then
    opts+="--noaddons "
  fi

  # Assemble command
  command="$preopts"
  command+="$binary"
  command+="$opts"
  command+="$extra_opts"
  if [ "$Verbose" -eq 1 ]; then
    echo "$command"
  elif [ "$Verbose" -eq 2 ]; then
    echo "$command" "2> error.log"
  fi
  $command 2> error.log
  error_code="$?"
  if check_errs $2 $error_code $1; then
    FirstTest=0 #Only start using validcache flag when at least one test has passed without error
    handle_error_log 0
    return 0
  else
    # If we got a code of value at least 128, and it wasn't KILL timeout, it means we segfaulted / failed assertion etc. most likely, so run gdb to get a backtrace
    if [ "$GdbBacktraceMode" -eq 1 -a "$error_code" -ge 128 -a "$error_code" -ne 137 ]; then
        echo -e "\n* Launching gdb for a backtrace...\n" >>error.log
        gdb -q -batch -ex start -ex continue -ex bt -ex quit --args $binary $opts $extra_opts >>error.log
    fi

    handle_error_log 1
    return 1
  fi
}


### Main Script Starts Here ###

Verbose=0
UnixTimeout=0
CleanMode=0
LoadFile="wml_test_schedule"
BinPath="./"
StrictMode=1
DebugMode=0
GdbBacktraceMode=0
extra_opts=""
basetimer=10
export OMP_WAIT_POLICY=PASSIVE

while getopts ":hvwcusdgp:l:a:t:" Option
do
  case $Option in
    h )
      usage
      exit 0;
      ;;
    v ) 
      if [ "$Verbose" -lt 1 ]; then 
        Verbose=1
      fi
      ;;
    w )
      if [ "$Verbose" -lt 2 ]; then 
        Verbose=2
      fi
      ;;
    c )
      CleanMode=1
      ;;
    u )
      UnixTimeout=1
      ;;
    s )
      StrictMode=0
      ;;
    d )
      DebugMode=1
      ;;
    g )
      GdbBacktraceMode=1
      ;;
    p )
      if [ "$OPTARG" = "XCode" -o "$OPTARG" = "xcode" -o "$OPTARG" = "Xcode" ]; then
        # Find it in XCode's build dir
        path_list=( ~/Library/Developer/XCode/DerivedData/Wesnoth*/Build/Products/{Debug,Release}/Wesnoth.app/Contents/MacOS/ )
        BinPath="${path_list[0]}"
      else
        BinPath="$OPTARG"
      fi
      ;;
    l )
      LoadFile="$OPTARG"
      ;;
    a )
      extra_opts+=" $OPTARG"
      ;;
    t )
      echo "Replacing default timer of 10 with" "$OPTARG" "seconds."
      basetimer="$OPTARG"
      ;;
  esac
done
shift $(($OPTIND - 1))

extra_opts+="$*"

# Make sure the binary exists
if [ "$DebugMode" -eq 1 ]; then
  if [ ! -x "$BinPath/wesnoth-debug" ]; then
    echo "Wesnoth binary not found at $BinPath/wesnoth-debug"
    exit 1
  fi
else
  if [ ! -x "$BinPath/wesnoth" ]; then
    echo "Wesnoth binary not found at $BinPath/wesnoth"
    exit 1
  fi
fi

if [ "$Verbose" -ge 2 ]; then
  if [ "${#extra_opts}" -ge 0 ]; then
    echo "Found additional arguments to wesnoth: " "$extra_opts" 
  fi
  if [ "$UnixTimeout" -eq 1 ]; then
    echo "Wesnoth built-in timeout was disabled. This script was updated, and -u is now unnecessary and has no effect."
  fi
fi

# Disable timeouts if the timeout utility is missing
if [ ! $(which timeout) ]; then
  echo 'timeout not found; skipping timeout tests'
  basetimer=0
fi

echo "Getting tests from" "$LoadFile" "..."

old_IFS=$IFS
IFS=$'\n'
schedule=($(cat $LoadFile)) # array
IFS=$old_IFS

NumTests=0
NumComments=0

for line in "${schedule[@]}"
do
    if [[ "$line" =~ \#.* ]]; then
      NumComments=$((NumComments+1))
    else
      NumTests=$((NumTests+1))
    fi
done

echo "Running" $NumTests "test scenarios."

if [ -f "errors.log" ]; then
  rm errors.log
fi

AllPassed=1
FirstTest=1
TotalPassed=0

for line in "${schedule[@]}"
do
    if [[ "$line" =~ \#.* ]]; then
      if [ "$Verbose" -ge 2 ]; then
        echo "comment:" $line
      fi
    else
      if [ "$Verbose" -eq 0 ]; then
        echo -n "."
      fi
      if run_test $line; then #note: don't put run_test inside a pipe implicitly by using ! or something, this will cause the FirstTest variable not to work properly
        if [ "$Verbose" -ge 2 ]; then
          echo "good"
        elif [ "$Verbose" -eq 0 ]; then
          echo -ne '\b:'
        fi
        TotalPassed=$((TotalPassed+1))
      elif [ $? -ne 100 ]; then
        if [ "$Verbose" -eq 0 ]; then
          echo -ne '\b!'
        fi
        AllPassed=0
      fi
    fi
done

if [ "$Verbose" -eq 0 ]; then
  echo ''
fi

if [ "$AllPassed" -eq 0 ]; then
  if [ "$StrictMode" -eq 1 ]; then
    echo "$TotalPassed" "out of" "$NumTests" "tests were correct."
  else
    echo "$TotalPassed" "out of" "$NumTests" "tests were correct. (However, some tests may expect to be running in strict mode, and not fail as expected otherwise.)"
  fi
  echo "Not all tests gave the correct result."
  echo "Check errors.log for error reports."
  exit 2
else
  echo "All tests gave the correct result."
  exit 0
fi