Only some 15.700 parameters are read

[romP44]

Hello,

I have a 15.bass device (same 15.basv, so symbolic linked to 15.700).
The electrical energy counters are read (automatically displayed over MQTT in Home Assistant), but not the fuel energy counters.
Here is a raw log filtered on B524:
2024-01-09 | 22:06:14.317 | > | 3115b52406020000005c0014<000000 | > | 0
2024-01-09 | 22:06:20.351 | > | 3115b524060200000057003b<0008010057007100000016 | > | 0
2024-01-09 | 22:06:26.351 | > | 3115b52406020000005300fa<0008010053000f000000a6 | > | 0
2024-01-09 | 22:06:32.371 | > | 3115b52406020000004f0010<000801004f000400000041 | > | 0
2024-01-09 | 22:06:38.371 | > | 3115b52406020000005800d5<00080100580063000000d9 | > | 0
2024-01-09 | 22:06:44.330 | > | 3115b524060200000054000d<00080100540009000000ef | > | 0
2024-01-09 | 22:06:50.331 | > | 3115b52406020000005000cc<00080100500002000000f2 | > | 0

I.e 5700 is PrEnergySumHc. Any idea why PrFuelSumHc is not polled too (5600)? I do have a boiler and fuel values are displayed on the thermostat.
I use config files from Github repo.

Thank you for your support.

[romP44]

I managed to start polling by changing r to r1 on PrFuel lines. Why these lines with r are not read?

Now I can see these PrFuel values in MQTT Explorer, but still not in HA. Is there something else to enable auto discovery on these new topics?

[Koky05]

You need to add that value into filtered names in MQTT-hassio.cfg: filter-name = status|temp|yield|fuel|count...

[romP44]

OK, thank you.
If I want all, should I just comment the filter-name line?

[Koky05]

Yes, exactly. Also change filter-direction = r|u|^w to include writable values.

[romP44]

As I'm using ebusd in home assisitant, I can't easily edit MQTT-hassio.cfg.
But I found info here: https://community.home-assistant.io/t/an-ebusd-add-on/344852/100

If some polled readings do not show up in Home Assistant it might be because mqtt-hassio.cfg is configured to filter them out. Try setting to mqttvar to "filter-name=" and this will remove any filters so you can debug the issue.

[romP44]

And it works! Thank you!