Ebusd "spams" my Vaillant bus

[Shortykiller]

Hi gues

I have recently started playing around with ebusd over mqtt.
Mostly it kind of works, I can read the values I want by editing the .csv files, and I can also write to the heatpump parameters I need.

The problem is that when Ebusd is running, my Heatpump gets som communication errors, like it cannot communicate with its own components lige circulation pump, and outdoor unit. Its like the ebusd is completly taking over traffic on the bus.
My .csv file parameters are set to r9, so lowest priority.

Anyone else have seen this problem, or know how to fix it??

Best regardz, Morten

[Shortykiller]

I fixed the problem.
The ESP32 board was powered from the BUS it self, but when talking/listening i draws to much power, and ruins it for all other devices, except it self.
So not the software/integration that was faulty.
I set up an external powersupply (NOT on the BUS, but supplying with usb-C in my case), and now everything works..
Hope someone can benefit from this later on.