Skip to content

Latest commit

 

History

History
84 lines (73 loc) · 3.86 KB

foscam_away_mode_PTZ.markdown

File metadata and controls

84 lines (73 loc) · 3.86 KB
layout title description date sidebar comments sharing footer ha_category
page
Foscam Recording during Away Mode Only using Pan/Tilt/Zoom Control and Motion Detection
Example of how to set Foscam to only have Motion Detection Recording while no one is home. When users are home the Foscam will indicate it is not recording by pointing down and away from users
2016-03-10 13:05
true
false
true
true
Automation Examples

This requires a Foscam IP Camera camera with PTZ (Pan, Tilt, Zoom) and CGI functionality (Source)

Foscam Cameras can be controlled by Home Assistant through a number of CGI commands. The following outlines examples of the switch, services, and scripts required to move between 2 preset destinations while controlling motion detection, but many other options of movement are provided in the Foscam CGI User Guide linked above.

The switch.foscam_motion will control whether the motion detection is on or off. This switch supports statecmd, which checks the current state of motion detection.

# Replace admin and password with an "Admin" privileged Foscam user
# Replace ipaddress with the local IP address of your Foscam
switch:
 platform: command_line
 switches:
   #Switch for Foscam Motion Detection
   foscam_motion:
     oncmd: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=setMotionDetectConfig&isEnable=1&usr=admin&pwd=password"'
     offcmd: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=setMotionDetectConfig&isEnable=0&usr=admin&pwd=password"'
     statecmd: 'curl -k --silent "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=getMotionDetectConfig&usr=admin&pwd=password" | grep -oP "(?<=isEnable>).*?(?=</isEnable>)"'
     value_template: '{% raw %}{{ value == "1" }}{% endraw %}'

The service shell_command.foscam_turn_off sets the camera to point down and away to indicate it is not recording, and shell_command.foscam_turn_on sets the camera to point where I'd like to record. h of these services require preset points to be added to your camera. See source above for additional information.

shell_command:
  #Created a preset point in Foscam Web Interface named Off which essentially points the camera down and away
  foscam_turn_off: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=ptzGotoPresetPoint&name=Off&usr=admin&pwd=password"'
  #Created a preset point in Foscam Web Interface named Main which points in the direction I would like to record
  foscam_turn_on: 'curl -k "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=ptzGotoPresetPoint&name=Main&usr=admin&pwd=password"'

The script.foscam_off and script.foscam_on can be used to set the motion detection appropriately, and then move the camera. These scripts can be called as part of an automation with device_tracker triggers to set home and not_home modes for your Foscam and disable motion detection recording while home.

script:
 foscam_off:
   sequence:
   - service: switch.turn_off
     data:
       entity_id: switch.foscam_motion
   - service: shell_command.foscam_turn_off
 foscam_on:
   sequence:
   - service: switch.turn_off
     data:
       entity_id: switch.foscam_motion
   - service: shell_command.foscam_turn_on
   - service: switch.turn_on
     data:
       entity_id: switch.foscam_motion

To automate Foscam being set to "on" (facing the correct way with motion sensor on), I used the following simple automation:

automation:
  - alias: Set Foscam to Away Mode when I leave home
    trigger:
      platform: state
      entity_id: group.family
      from: 'home'
    action:
      service: script.foscam_on
  - alias: Set Foscam to Home Mode when I arrive Home
    trigger:
      platform: state
      entity_id: group.family
      to: 'home'
    action:
      service: script.foscam_off