zynqPCB

An 8-layer board built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, a handful of sensors, and Arduino Uno style header for screen connection

3D Render

Layout

Manufactured PCB - Top

Manufactured PCB - Bottom

Introduction

Hi friends! This is the current status of my 4-year project to make an FPGA-accelerated audio+video synthesizer. I am currently taking a hiatus from this project, and have decided to make the entire PCB design available on Github! Quite a bit of work has been put into this project. The difficult tasks of part selection and routing have been taken care of. I am still testing the functionality of the board. Only one PCB problem has been found: the SPI Flash for Zynq Boot was the wrong footprint! FIX THIS TODAY

I believe that together we can make this a formidable tool in the open hardware community.

The following software projects need to be undertaken before this project is usable by the general public:

1. Development of Boot firmware for the SPI flash which loads the linux kernel from the SD card
2. Development of a basic shell block diagram in Vivado

If you embark on one of these projects, please share your code here so other engineers don't have to reproduce your work :)

IMPORTANT: Make sure to clone the following into the same directory:

https://github.com/julianfl0w/footprints.pretty
https://github.com/julianfl0w/lib

I make no guarantees as to device funtionality. Please review the board carefully before production.

Specific hardware (from BOM)
xc7z020clg484 (Zynq Chip)
VL53L1CXV0FY/1 (rangefinder)

Interfaces:

1. VL53L1CXV0FY Rangefinder : Untested
2. APDS-9960 Rangefinder : Untested
3. LIS2HH12 Accelerometer : Untested
4. LSM6DSLTR IMU : Untested
5. HDMI Out : Untested
6. USB Host : Untested
7. DDR3 PS Memory : Untested
8. TLV320 Audio Codec : Untested
9. MicroSD card : Untested