Skip to content

Latest commit

 

History

History
 
 

SN_Photoresistor

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
platformio_override.ini
platformio_override.ini
 
 
readme.md
readme.md
 
 
usermod_sn_photoresistor.h
usermod_sn_photoresistor.h
 
 
usermods_list.cpp
usermods_list.cpp
 
 

readme.md

SN_Photoresistor usermod

This usermod will read from an attached photoresistor sensor like the KY-018. The luminance is displayed in both the Info section of the web UI as well as published to the /luminance MQTT topic, if enabled.

Installation

Copy the example platformio_override.ini to the root directory. This file should be placed in the same directory as platformio.ini.

Define Your Options

  • USERMOD_SN_PHOTORESISTOR - Enables this user mod. wled00\usermods_list.cpp
  • USERMOD_SN_PHOTORESISTOR_MEASUREMENT_INTERVAL - Number of milliseconds between measurements. Defaults to 60000 ms
  • USERMOD_SN_PHOTORESISTOR_FIRST_MEASUREMENT_AT - Number of milliseconds after boot to take first measurement. Defaults to 20000 ms
  • USERMOD_SN_PHOTORESISTOR_REFERENCE_VOLTAGE - Voltage supplied to the sensor. Defaults to 5v
  • USERMOD_SN_PHOTORESISTOR_ADC_PRECISION - ADC precision. Defaults to 10 bits
  • USERMOD_SN_PHOTORESISTOR_RESISTOR_VALUE - Resistor size, defaults to 10000.0 (10K Ohms)
  • USERMOD_SN_PHOTORESISTOR_OFFSET_VALUE - Offset value to report on. Defaults to 25

All parameters can be configured at runtime via the Usermods settings page.

Project link

PlatformIO requirements

If you are using platformio_override.ini, you should be able to refresh the task list and see your custom task, for example env:usermod_sn_photoresistor_d1_mini.

Change Log