README.HDL

/*
                     Hercules Dynamic Loader

    The dynamic loader is intended to supply a loading and linking
    mechanism, whereby routines, commands, instructions and functions
    can be dynamically added to hercules, without the need to rebuild
    or even restart hercules.

    The loader can be controlled by the following hercules commands:

        ldmod <module list>    - Load modules named in module list
        rmmod <module list>    - Unload modules named in list
        lsmod                  - List all modules and entry points
        lsdep                  - List all dependencies

        The ldmod statement may also appear in the hercules
        configuration file.

        configuration statement:
        modpath <pathname>     - Specifies where modules are loaded from


    The loader has 2 basic functions module load and module unload.

    Module load:

    int hdl_load(char *name, int flags);

        Where name is the module name, this name may include the
        path.  If no path is given then the module is loaded from
        the default library search order.  Note that this is
        different from the standard search order.

        flags may be one of the following:

         HDL_LOAD_DEFAULT or 0  -  Default load
         HDL_LOAD_MAIN          -  Reserved for hercules use
         HDL_LOAD_NOUNLOAD      -  Module cannot be unloaded
         HDL_LOAD_FORCE         -  Override dependency check
         HDL_LOAD_NOMSG         -  Do not issue any error messages

        This function returns a zero value when the load is successful.


    Module unload:

    int hdl_dele(char *name);

        Where name is the name of the module that is to be unloaded.

        This function returns a zero value when the unload is successful.


    Resolving Symbols:

    void * HDL_FINDSYM(char *symbolname);

        This function will return the entry point of symbolname or
        zero when the symbol cannot be resolved.

    void * HDL_FINDNXT(current_entry point);

        This function will return the previous entry point.
        That is, the entry point which was current before the entry point
        as identified by current_entry point was registered.

        This function is intended to allow a module to call the original
        routine.  An example of this is given in the panel_command entry
        as listed below.


    There are some special considerations for systems that do not support
    the concept of back-linking.  Back-linking is the operating system
    support of dynamically resolving unresolved external references in
    a dynamic module, with the main module, or other loaded modules.
    Cygwin does not support back-linking and Cygwin specials are listed
    in this example with #if defined(WIN32).


    Some additional notes:

    Unload will remove all references to a specific module, but currently
    it will not actually remove the loaded module from memory.  This is
    because there is no safe way (yet) to synchronize unloading of code
    and, besides, it may still be in use.  This should however pose no
    practical limitations.

    When a module lists a new dependency, that dependency will be regis-
    tered.  Unloading the module does not remove the dependency, this is
    to be consistent with the previous note about unloading.



    Diagnose F14 - dll interface

    Purpose:

    Allow external routines to be called from OS running under hercules
    external routines must reside in hercules dll's


    Instruction:

      Format:

      83 r1 r3 d2(b2)

      r1: register containing real address of external routine name to be
          called this routine name is defined as CL32, and is subject to
          EBCDIC to ASCII translation under control of hercules codepages.
          This parameter must be 32 byte aligned.

      r3: register containing user parameter.

      d2(b2): 0xF14


    External routine:

      void xxxx_diagf14_routine_name(int r1, int r3, REGS *regs);

      xxxx_diagf14_ prefix to routine_name
      xxxx being either s370, s390 or z900 depending on architecture mode.

      The instruction is subject to machine malfunction checking.
      The external routine may be interrupted when an extended wait or loop
      occurs.


*/

#include "hercules.h"
#include "devtype.h"
#include "opcode.h"


/*   Local definitions   */


static void *gui_cpu_state(REGS *regs)
{
    void *(*prev_cpu_state)(REGS *);

    /* CPU status update processing */

    /* Call higher level routine if one exists */
    if((prev_cpu_state = HDL_FINDNXT(gui_cpu_state)))
        return prev_cpu_state(regs);

    return NULL;
}


void  *ProcessCommand (char *command)
{
void * (*prev_panel_command)(char *);

    if (strncasecmp(command,"ourcmd",6) == 0)
    {
        logmsg ("This is our command\n");
    }
    else
        /* Call higher level command handler */
        if((prev_panel_command = HDL_FINDNXT(ProcessCommand)))
            return prev_panel_command(command);

    return NULL;
}


/*
    The dependency section is - for all intents and purposes - called
    before the module is loaded.  Its function is to check that there
    are no incompatibilities between this module and the version of
    hercules that we are running.  Dependencies are identified by
    name, this name is given on the HDL_DEPENDENCY statement.

    Each dependency then has a version code, and a size code, where
    the version code is a character string, and the size code an
    integer value.  If the version or size codes do not match with
    those in the hercules main module, the module cannot be loaded.
    The version is usually a character string that identifies the
    version of the component, and the size is to be the size of
    the component in the case of structures or unions.

    Version and size should be coded as following:

      #define HDL_VERS_SOMETHING  "1.0"
      #define HDL_SIZE_SOMETHING  sizeof(SOMETHING)

    where SOMETHING can be a structure or other component.

    the associated dependency statement:

      HDL_DEPENDENCY(SOMETHING);

    When a dependency is given that has not yet been registered,
    it will be registered, such that it can be checked in subsequent
    module loads.

    The dependency section is mandatory.

*/

HDL_DEPENDENCY_SECTION;
{
     /* Define version dependencies that this module requires */
     HDL_DEPENDENCY ( HERCULES );
     HDL_DEPENDENCY ( SYSBLK   );
     HDL_DEPENDENCY ( REGS     );
     HDL_DEPENDENCY ( DEVBLK   );
}
END_DEPENDENCY_SECTION;


/*
    The registration exports labels and their associated entry points
    to hercules, such that the symbols and associated entry points may
    be known to hercules and any other module that may have been loaded.
    The registration section is called once during module load.

    If we have registered a function that is also called from this DLL,
    then it must also be listed in the resolver section.  This to ensure
    that the symbol is properly resolved when other modules are loaded.

    The registration section is optional.

*/


HDL_REGISTER_SECTION;
{
    /* These are the entry points we export to Hercules
       All functions and labels used this dll must be static
       and non exportable, this to ensure that no foreign
       names are included by the system loader on systems
       that provide back-link support (mostly *nix systems)
    */

    HDL_REGISTER ( daemon_task, external_gui_interface );
    HDL_REGISTER ( debug_cpu_state, gui_cpu_state );
    HDL_REGISTER ( panel_command, ProcessCommand );
}
END_REGISTER_SECTION;


/*
    The resolver section imports the entry points of symbols that
    have been previously registered.

    When a symbol is requested that has not been previously registered
    then the resolve function will search the loaded modules for
    that symbol, and register it implicitly.  This latter function
    is mainly provided to support systems that do not have back-link
    support (most notably Cygwin).

    Entry points that are resolved should be indirect pointers, for
    example the panel_command routine is defined as:

       void *(*panel_command)(char *)

    The resolver may be called multiple times, the first time it is
    called is during module load, immediately after the registration
    section is called.  It is subsequently called when other modules
    are loaded or unloaded.

    When a symbol cannot be resolved it will be set to NULL.

    The resolver section is optional.

*/


HDL_RESOLVER_SECTION;
{
    /* These are Hercules's entry points that we need access to
       these may be updated by other loadable modules, so we need
       to resolve them here.
    */

    HDL_RESOLVE ( panel_command );
    HDL_RESOLVE ( debug_cpu_state );

    HDL_RESOLVE_PTRVAR ( my_sysblk_ptr, sysblk );
}
END_RESOLVER_SECTION;


/*
    The device section is to register device drivers with hercules.
    It associates device types with device handlers

    If a device handler is not registered for a specific device type
    then and a loadable mode with the name of "hdtxxxx" (where xxxx
    is the device type) exists then that module is loaded

    Search order:
        1) The most recently registered (ie loaded) device of the
           requested device type.
        2) Device driver in external loadable module, where the
           module name is hdtxxxx (where xxxx is the device type
           ie module name hdtlcs for device type LCS or hdt2703
           for device type 2703)
        3) If the device is listed in the alias table (hdteq.c)
           then external module hdtyyyy will be loaded, where
           yyyy is the base name as listed in hdteq.c.
        The device name is always mapped to lower case when searching
        for loadable modules.

    The device section is optional
*/

HDL_DEVICE_SECTION;
{
    HDL_DEVICE(1052,constty_device_hndinfo);
    HDL_DEVICE(3215,constty_device_hndinfo);
}
END_DEVICE_SECTION;


/*
    The final section is called once, when the module is unloaded
    or when hercules terminates.

    A dll can reject being unloaded by returning a non-zero value
    in the final section.

    The final section is intended to be used to perform cleanup or
    indicate cleanup action to be taken.  It may set a shutdown
    flag that is used within this dll that all local functions
    must now terminate.

    The final section is optional
*/

HDL_FINAL_SECTION;
{

}
END_FINAL_SECTION;




Below is Fish's sample code...


/*   Define version dependencies that this module requires...
**
** The following are the various Hercules structures whose layout your
** module depends on. The layout of the following structures (size and
** version) MUST match the layout that was used to build Hercules with.
** If the size/version of any of the following structures changes (and
** a new version of Hercules is built using the new layout), then YOUR
** module must also be built with the new layout as well. The layout of
** the structures as they were when your module is built MUST MATCH the
** layout as it was when the version of Hercules you're using was built.
** Further note that the below HDL_DEPENDENCY_SECTION is actually just
** a function that the hdl logic calls, and thus allows you to insert
** directly into the below section any specialized 'C' code you need.
*/
HDL_DEPENDENCY_SECTION;
{
     HDL_DEPENDENCY(HERCULES);
     HDL_DEPENDENCY(REGS);
     HDL_DEPENDENCY(DEVBLK);
     HDL_DEPENDENCY(SYSBLK);
     HDL_DEPENDENCY(WEBBLK);
}
END_DEPENDENCY_SECTION;


/*  Register re-bindable entry point with resident version, or UNRESOLVED
**
** The following section defines the entry points within Hercules that
** your module is overriding (replacing). Your module's functions will
** be called by Hercules instead of the normal Hercules function (if any).
** The functions defined below thus provide additional/new functionality
** above/beyond the functionality normally provided by Hercules. Be aware
** however that it is entirely possible for other dlls to subsequently
** override the same functions that you've overridden such that they end
** up being called before your override does and your override may thus
** not get called at all (depending on how their override is written).
** Note that the "entry-point name" does not need to correspond to any
** existing variable or function (i.e. the entry-point name is just that:
** a name, and nothing more. There does not need to be a variable defined
** anywhere in your module with that name). Further note that the below
** HDL_REGISTER_SECTION is actually just a function that the hdl logic
** calls, thus allowing you to insert directly into the below section
** any specialized 'C' code that you may need.
*/
HDL_REGISTER_SECTION;
{
    /*            register this       as the address of
                  entry-point name,   this var or func
    */
    HDL_REGISTER( panel_command,      my_panel_command );
    HDL_REGISTER( panel_display,      my_panel_display );
    HDL_REGISTER( some_exitpoint,     UNRESOLVED       );
}
END_REGISTER_SECTION;


/*   Resolve re-bindable entry point on module load or unload...
**
** The following entries "resolve" entry points that your module
** needs. These entries define the names of registered entry points
** that you need "imported" into your dll so that you may call them
** directly yourself. The HDL_RESOLVE_PTRVAR macro is used to auto-
** matically set one of your own pointer variables to the registered
** entry point's currently registered value (usually an address of
** a function or variable). Note that the HDL_RESOLVER_SECTION is
** actually just a function that the hdl logic calls, thus allowing
** you to insert directly into the below section any specialized 'C'
** code that you may need.
*/
HDL_RESOLVER_SECTION;
{
    /*           Herc's registered
                 entry points that
                 you need to call
                 directly yourself
    */
    HDL_RESOLVE( config_command          );
    HDL_RESOLVE( some_exitpoint          );
    HDL_RESOLVE( debug_cpu_state         );
    HDL_RESOLVE( debug_program_interrupt );
    HDL_RESOLVE( debug_diagnose          );

    /* The following illustrates how to use HDL_RESOLVE_PTRVAR
       macro to retrieve the address of one of Herc's registered
       entry points.

                         Your pointer-   Herc's registered
                         variable name   entry-point name
    */
    HDL_RESOLVE_PTRVAR(  my_sysblk_ptr,  sysblk         );
}
END_RESOLVER_SECTION;


/* The following section defines what should be done just before
** your module is unloaded. It is nothing more than a function that
** is called by hdl logic just before your module is unloaded, and
** nothing more. Thus you can place any 'C' code here that you want.
*/
HDL_FINAL_SECTION;
{
    my_cleanup();
}
END_FINAL_SECTION;




/* DYNDIAG.C    (c) Copyright Jan Jaeger, 2003                       */
/*              Hercules Dynamic Loader                              */

/*              Sample diagf14 dll routine                           */

/*                                                                   */
/*   Assembler to call routine:                                      */
/*                                                                   */
/*              LRA  R1,=CL32'test'                                  */
/*              LRA  R2,=X'01020304'  USERPARM                       */
/*              DC   X'83120F14'   DIAG R1,R2,X'F14'                 */
/*                                                                   */


#include "hercules.h"

#include "opcode.h"

#include "inline.h"


void ARCH_DEP(diagf14_test) (int r1, int r3, REGS *regs)
{
U32 r3loc;

    logmsg("diagf14:  r3 = %8.8X\n",regs->GR_L(r3));
    r3loc = ARCH_DEP(vfetch4) (regs->GR_L(r3), USE_REAL_ADDR, regs);
    logmsg("diagf14: *r3 = %8.8X\n",r3loc);
}



#if !defined(_GEN_ARCH)

#if defined(_ARCHMODE2)
 #define  _GEN_ARCH _ARCHMODE2
 #include "dyndiag.c"
#endif

#if defined(_ARCHMODE3)
 #undef   _GEN_ARCH
 #define  _GEN_ARCH _ARCHMODE3
 #include "dyndiag.c"
#endif


HDL_DEPENDENCY_SECTION;
{
     HDL_DEPENDENCY (HERCULES);
     HDL_DEPENDENCY (REGS);
     HDL_DEPENDENCY (DEVBLK);
     HDL_DEPENDENCY (SYSBLK);

} END_DEPENDENCY_SECTION;


HDL_REGISTER_SECTION;
{

    HDL_REGISTER(s370_diagf14_test,s370_diagf14_test);
    HDL_REGISTER(s390_diagf14_test,s390_diagf14_test);
    HDL_REGISTER(z900_diagf14_test,z900_diagf14_test);

} END_REGISTER_SECTION;


HDL_RESOLVER_SECTION;
{

} END_RESOLVER_SECTION;

HDL_FINAL_SECTION;
{

} END_FINAL_SECTION;


#endif /*!defined(_GEN_ARCH)*/

/* END DYNDIAG.C */



/* DYNCGI.C     (c)Copyright Jan Jaeger, 2002-2003                   */
/*              HTTP cgi-bin routines                                */

/* This file contains cgi routines that may be executed on the      */
/* server (ie under control of a hercules thread)                    */
/*                                                                   */
/*                                                                   */
/* Dynamically loaded cgi routines must be registered under the      */
/* pathname that they are accessed with (ie /cgi-bin/test)           */
/* All cgi pathnames must start with /cgi-bin/                       */
/*                                                                   */
/*                                                                   */
/* The cgi-bin routines may call the following HTTP service routines */
/*                                                                   */
/* char *cgi_variable(WEBBLK *webblk, char *name);                   */
/*   This call returns a pointer to the cgi variable requested       */
/*   or a NULL pointer if the variable is not found                  */
/*                                                                   */
/* char *cgi_cookie(WEBBLK *webblk, char *name);                     */
/*   This call returns a pointer to the cookie requested             */
/*   or a NULL pointer if the cookie is not found                    */
/*                                                                   */
/* char *cgi_username(WEBBLK *webblk);                               */
/*   Returns the username for which the user has been authenticated  */
/*   or NULL if not authenticated (refer to auth/noauth parameter    */
/*   on the HTTPPORT configuration statement)                        */
/*                                                                   */
/* char *cgi_baseurl(WEBBLK *webblk);                                */
/*   Returns the url as requested by the user                        */
/*                                                                   */
/* void html_header(WEBBLK *webblk);                                 */
/*   Sets up the standard html header, and includes the              */
/*   html/header.htmlpart file.                                      */
/*                                                                   */
/* void html_footer(WEBBLK *webblk);                                 */
/*   Sets up the standard html footer, and includes the              */
/*   html/footer.htmlpart file.                                      */
/*                                                                   */
/* int html_include(WEBBLK *webblk, char *filename);                 */
/*   Includes an html file                                           */
/*                                                                   */
/*                                                                   */
/*                                           Jan Jaeger - 28/03/2002 */

#include "hstdinc.h"
#include "hercules.h"
#include "devtype.h"
#include "opcode.h"
#include "httpmisc.h"

#if defined(OPTION_HTTP_SERVER)

void cgibin_test(WEBBLK *webblk)
{
    html_header(webblk);
    hprintf(webblk->hsock, "<H2>Sample cgi routine</H2>\n");
    html_footer(webblk);
}


HDL_DEPENDENCY_SECTION;
{
     HDL_DEPENDENCY(HERCULES);
//   HDL_DEPENDENCY(REGS);
//   HDL_DEPENDENCY(DEVBLK);
//   HDL_DEPENDENCY(SYSBLK);
     HDL_DEPENDENCY(WEBBLK);
}
END_DEPENDENCY_SECTION;


HDL_REGISTER_SECTION;
{
    HDL_REGISTER( /cgi-bin/test, cgibin_test );
}
END_REGISTER_SECTION;


HDL_RESOLVER_SECTION;
{
}
END_RESOLVER_SECTION;


HDL_FINAL_SECTION;
{
}
END_FINAL_SECTION;

#endif /*defined(OPTION_HTTP_SERVER)*/