parameters.toml

[iosevka]
copyright = 'Copyright (c) 2015-2017 Belleve Invis.'
licence = '''This font software is licenced under the SIL Open Font Licence, Version 1.1. This is licence is avaliable with a FAQ at: http://scripts.sil.org/OFL. This font software is distributes on an 'AS IS' basis, without warranties or conditions of any kind, either express or implied. See the SIL Open Font licence fot the specific language, premissions and limitations governing your use of this font software.'''
manufacturer = 'Belleve Invis'
designer = 'Belleve Invis'
description = 'Spatial efficient monospace font family for programming. Built from code. http://be5invis.github.io/Iosevka'

leading = 1250     # Default line height times 1000.
descenderPad = 0   # Additional line height, added to descender.
width = 500        # Character width. Increase this if you think that Iosevka is too narrow.
cap = 735          # Cap height (as well as ascender).
xheight = 530      # X-height.
#descender = -205  # Depth of descender. Currently unused.

ideoMid  = 365
symbolMid = 365    # Center of parens, maths, geometrics...
parenSize = 1066   # Size of parens, brackets, braces, slashes, etc.
operSize = 852     # Size of "taller" mathematical operators (cups, etc.)
tackSize = 800     # Size of logical operators (tacks, etc.)

contrast = 1.11111 # Stroke width contrast.
essx = 1.12        # Contrast of the middle of 'S'.

slantAngle = 0     # Slant angle, in degrees.

accent = 155       # Height of accent marks.
accentx = 200      # Width of accent marks.
overshoot = -8     # Vertical overshoot for arcs.
overshootx = -8    # Horizontal overshoot for arcs.
oxhook = -5        # Horizontal overshoot for hook tips.
fovershoot = -40   # Overshoot of the top end of italic `f`.

longjut = 175      # Length of long serifs, like that in `i`.
jut = 85           # Length of short serifs, used in Slab only.
vjut = 145         # Length of vertical serifs, used in Slab only.

smooth = 195       # Vertical arc size in capital letters.
smallsmooth = 220  # Vertical arc size in lowercase letters.
smoothadjust = 120 # Parameter to balance arcs in slanted shapes.
superness = 2.2    # Superness of arcs.

barpos = 0.525     # Position of the middle bar in most letters, like `E`.
overlaypos = 0.52  # Position of the overlay mark.
ebarpos = 0.50     # Position of the middle bar in `e`.
gbarpos = 0.42
pbarpos = 0.53
fivebarpos = 0.64

hook  = 155        # Hook depth in most letters.
ahook = 130
shook = 110
jhook = 135
fhook = 120
rhook = 90
hookx = 170

tbalance = 50
tbalance2 = 30
rbalance = 60
rbalance2 = 15
jbalance = 63
fbalance = 6
onebalance = 30

isItalic = false   # Use italic shapes?
isOblique = false  # Use oblique shapes?

lllcrowdedness = 3.33333333

spacing = 1 # Spacing indicator

# Powerline-specific parameters
powerlineScaleY = 1 # Vertical scale
powerlineScaleX = 1 # Horizontal scale
powerlineShiftY = 0 # Vertical shift
powerlineShiftX = 0 # Horizontal shift

# Full-width codes
fullwidth_codes = []

# Comment the line below to enable CJKV glyph generation
noCJKV = true

[verbose]
verbose = true

### Weights
[w-100]
stroke = 18
sb = 72
dotsize = 53
periodsize = 55

cthin = 0.9
cthinb = 0.9
vtipfine = 1
shoulderfine = 0.8
pbarpos = 0.5

[w-200]
stroke = 36
sb = 68
dotsize = 70
periodsize = 77

cthin = 0.75
cthinb = 0.75
vtipfine = 1
pbarpos = 0.5

[w-300]
stroke = 56
sb = 64
dotsize = 100
periodsize = 115

vtipfine = 0.9
pbarpos = 0.51

[w-400]
sb = 60            # Side bearing.
stroke = 72        # Stroke width of horizontal strokes.
dotsize = 125      # "Visual" size of dots in /i.
periodsize = 140   # "Visual" size of period.

[w-500]
sb = 57
stroke = 84
dotsize = 135
periodsize = 160
smooth = 200

[w-600]
sb = 54
stroke = 97
dotsize = 145
periodsize = 168
essx = 1.07

rbalance = 55
rbalance2 = 20
smooth = 203

[w-700]
sb = 50
stroke = 106
dotsize = 157
periodsize = 180
essx = 1.06
essxq = 1.10
jut = 89
vjut = 158

barpos = 0.51
fivebarpos = 0.64
rbalance = 52
rbalance2 = 23
rhook = 95
smooth = 206

[w-800]
sb = 45
stroke = 116
dotsize = 167
periodsize = 188
essx = 1.05
essxq = 1.15
jut = 96
vjut = 172

barpos = 0.51
fivebarpos = 0.64
rbalance = 50
rbalance2 = 25
rhook = 97
smooth = 210

[w-900]
sb = 42
stroke = 126
dotsize = 180
periodsize = 200
essx = 1.03
essxq = 1.15
jut = 100
vjut = 175

barpos = 0.51
fivebarpos = 0.64
rbalance = 50
rbalance2 = 25
rhook = 105
smooth = 215

### Slantness
[s-italic]
isItalic = true
slantAngle = 10
jhook = 120

[s-oblique]
isOblique = true
slantAngle = 10
jhook = 120

### Slab variant
[slab]
slab = true
onebalance = 10
overshootx = -16
[slab.multiplies]
sb = 1.1

### Spacings
[term]
spacing = 0
disableLigation = true

# Term variant with ligations
[termlig]
spacing = 0

[type]
inherits = ["xx-type"]
spacing = 2

[cc]
inherits = ["xx-cc"]
spacing = 3

###### Widths
# NOTE: this section is highly experimental
# HANDLE WITH EXTREME CARE
# Expanded : I heard someone want it being wider...
[wd-expanded.multiplies]
width = 1.15
sb = 1.15
[expanded]
inherits = ['wd-expanded']

# Compressed : And someone else want it being narrower
[wd-compressed.multiplies]
width = 0.9
sb = 0.9
[compressed]
inherits = ['wd-compressed']

###### Full-width codes
[xx-type]
spacing = 2
[xx-type.appends]
fullwidth_codes = [
	164, #¤
	177, #±
	215, #×
	247, #÷
	711, #ˇ
	713, #ˉ
	8212, #—
	8214, #‖
	8251, #※
	8451, #℃
	8712, #∈
	8719, #∏
	8720,
	8721, #∑
	8733, #∝
	8734, #∞
	8736, #∠
	8741, #∥
	8743, #∧
	8744, #∨
	8745, #∩
	8746, #∪
	8747, #∫
	8750, #∮
	8756, #∴
	8757, #∵
	8758, #∶
	8759, #∷
	8765, #∽
	8776, #≈
	8780, #≌
	8800, #≠
	8801, #≡
	8804, #≤
	8805, #≥
	8814, #≮
	8815, #≯
	8816,8817,8834,8835,8836,8837,
	8853, #⊕
	8854,
	8857, #⊙
	8866, 
	8867, 
	8868, 
	8869, #⊥
	8978, #⌒
	8896,8897,8898,8899
]

[xx-cc]
inherits = ["xx-type"]
spacing = 3
[xx-cc.appends]
fullwidth_codes = [
	167, #§
	8242, #′
	8243, #″
]

# stress-fw : force distinguish full-widths
[stress-fw]
stressFW = true

# Default ligation set configuration
[ligset-haskell]
defLigSet = "XHS0"

[ligset-idris]
defLigSet = "XIDR"

[ligset-elm]
defLigSet = "XELM"

[ligset-ml]
defLigSet = "XML0"

[ligset-fs]
defLigSet = "XFS0"

[ligset-fstar]
defLigSet = "XFST"

[ligset-swift]
defLigSet = "SWFT"

[ligset-purescript]
defLigSet = "PURS"

[ligset-coq]
defLigSet = "XV00"

###### Leading
[leading-750]
leading = 750
[leading-1000]
leading = 1000
[leading-1250]
leading = 1250
[leading-1500]
leading = 1500
[leading-1750]
leading = 1750
[leading-2000]
leading = 2000

###### Powerline
[powerline-scale-y-750]
powerlineScaleY = 0.75
[powerline-scale-y-875]
powerlineScaleY = 0.875
[powerline-scale-y-1000]
powerlineScaleY = 1
[powerline-scale-y-1125]
powerlineScaleY = 1.125
[powerline-scale-y-1250]
powerlineScaleY = 1.25
[powerline-scale-y-1375]
powerlineScaleY = 1.375
[powerline-scale-y-1500]
powerlineScaleY = 1.5
[powerline-scale-x-750]
powerlineScaleX = 0.75
[powerline-scale-x-875]
powerlineScaleX = 0.875
[powerline-scale-x-1000]
powerlineScaleX = 1
[powerline-scale-x-1125]
powerlineScaleX = 1.125
[powerline-scale-x-1250]
powerlineScaleX = 1.25
[powerline-scale-x-1375]
powerlineScaleX = 1.375
[powerline-scale-x-1500]
powerlineScaleX = 1.5
[powerline-shift-y-n500]
powerlineShiftY = -500
[powerline-shift-y-n450]
powerlineShiftY = -450
[powerline-shift-y-n400]
powerlineShiftY = -400
[powerline-shift-y-n350]
powerlineShiftY = -350
[powerline-shift-y-n300]
powerlineShiftY = -300
[powerline-shift-y-n250]
powerlineShiftY = -250
[powerline-shift-y-n200]
powerlineShiftY = -200
[powerline-shift-y-n150]
powerlineShiftY = -150
[powerline-shift-y-n100]
powerlineShiftY = -100
[powerline-shift-y-n50]
powerlineShiftY = -50
[powerline-shift-y-0]
powerlineShiftY = 0
[powerline-shift-y-p50]
powerlineShiftY = 50
[powerline-shift-y-p100]
powerlineShiftY = 100
[powerline-shift-y-p150]
powerlineShiftY = 150
[powerline-shift-y-p200]
powerlineShiftY = 200
[powerline-shift-y-p250]
powerlineShiftY = 250
[powerline-shift-y-p300]
powerlineShiftY = 300
[powerline-shift-y-p350]
powerlineShiftY = 350
[powerline-shift-y-p400]
powerlineShiftY = 400
[powerline-shift-y-p450]
powerlineShiftY = 450
[powerline-shift-y-p500]
powerlineShiftY = 500
[powerline-shift-x-n500]
powerlineShiftX = -500
[powerline-shift-x-n450]
powerlineShiftX = -450
[powerline-shift-x-n400]
powerlineShiftX = -400
[powerline-shift-x-n350]
powerlineShiftX = -350
[powerline-shift-x-n300]
powerlineShiftX = -300
[powerline-shift-x-n250]
powerlineShiftX = -250
[powerline-shift-x-n200]
powerlineShiftX = -200
[powerline-shift-x-n150]
powerlineShiftX = -150
[powerline-shift-x-n100]
powerlineShiftX = -100
[powerline-shift-x-n50]
powerlineShiftX = -50
[powerline-shift-x-0]
powerlineShiftX = 0
[powerline-shift-x-p50]
powerlineShiftX = 50
[powerline-shift-x-p100]
powerlineShiftX = 100
[powerline-shift-x-p150]
powerlineShiftX = 150
[powerline-shift-x-p200]
powerlineShiftX = 200
[powerline-shift-x-p250]
powerlineShiftX = 250
[powerline-shift-x-p300]
powerlineShiftX = 300
[powerline-shift-x-p350]
powerlineShiftX = 350
[powerline-shift-x-p400]
powerlineShiftX = 400
[powerline-shift-x-p450]
powerlineShiftX = 450
[powerline-shift-x-p500]
powerlineShiftX = 500

# Compatibility PUA ligature sample
# [[iosevka.compLig]]
# unicode = 57600 # 0xE100
# featureTag = 'XV00'
# sequence = '<*>'