This is a keyboard firmware with some features for Atmel AVR controller.
Source code is available here: http://github.com/tmk/tmk_keyboard
- Mouse key - Mouse control by keyboard.
- System Control Key - Power Down, Sleep, Wake Up and USB Remote Wake up.
- Media Control Key - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc.
- USB NKRO - Can send 120 keys(+ 8 modifiers) simultaneously.
- PS/2 mouse support - integrate PS/2 mouse(TrackPoint) into keyboard as composite device.
- keyboard protocols - PS/2, ADB and old keyboard protocols.
- ps2_usb - PS/2 keyboard to USB
- adb_usb - ADB keyboard to USB
- m0110_usb - Machintosh 128K/512K/Plus keyboard to USB
- terminal_usb - IBM Model M terminal keyboard(PS/2 scancode set3) to USB
- news_usb - Sony NEWS keyboard to USB
- x68k_usb - Sharp X68000 keyboard to USB
- hhkb - Happy Hacking Keyboard professional
- macway - Compact keyboard mod
- hbkb - Happy Buckling sprint keyboard(IBM Model M mod)
- common/ - common codes
- protocol/ - keyboard protocol support
- keyboard/ - keyboard projects
- converter/ - protocol converter projects
- doc/ - documents
- common.mk - Makefile for common
- protoco.mk - Makefile for protocol
- rules.mk - Makefile for build rules
- pjrc/ - PJRC USB stack
- vusb/ - Objective Development V-USB
- iwrap/ - Bluetooth HID for Bluegiga iWRAP
- ps2.c - PS/2 protocol
- adb.c - Apple Desktop Bus protocol
- m0110.c - Macintosh 128K/512K/Plus keyboard protocol
- news.c - Sony NEWS keyboard protocol
- x68k.c - Sharp X68000 keyboard protocol
To compile you need AVR GCC, AVR Libc and GNU make.
You can use WinAVR on Windows and CrossPack on Mac.
$ cd <project>
$ make
The firmware will be compiled as a file tmk_<project>.hex.
If you have a proper program command in Makefile just type this.
$ make program
As for Teensy you can use PJRC's loader to program hex file. http://www.pjrc.com/teensy/loader.html
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb1286 # Teensy++ 2.0
F_CPU = 16000000
Note that comment out to disable them.
MOUSEKEY_ENABLE = yes # Mouse keys
PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
EXTRAKEY_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
NKRO_ENABLE = yes # USB Nkey Rollover
Set proper command for your controller, bootloader and programmer.
# for PJRC Teensy
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
# for Atmel AT90USBKEY
PROGRAM_CMD = dfu-programmer $(MCU) flash $(TARGET).hex
# avrdude
PROGRAM_CMD = avrdude -p $(MCU) -c avrispmkII -P USB -U flash:w:$(TARGET).hex
PROGRAM_CMD = avrdude -p $(MCU) -c usbasp -U flash:w:$(TARGET).hex
PROGRAM_CMD = avrdude -p $(MCU) -c arduino -P COM1 -b 57600 -U flash:w:$(TARGET).hex
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xBEEF
/* device description */
#define MANUFACTURER t.m.k.
#define PRODUCT Macway mod
#define DESCRIPTION t.m.k. keyboard firmware for Macway mod
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
#define MATRIX_HAS_GHOST
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)))
Use PJRC's hid_listen to see debug messages and press <COMMAND> + H to debug menu.
See config.h for definition of <COMMAND> key combination.