forked from torvalds/linux
-
Notifications
You must be signed in to change notification settings - Fork 0
/
BusLogic.c
3906 lines (3647 loc) · 128 KB
/
BusLogic.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
/*
Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
Copyright 1995-1998 by Leonard N. Zubkoff <[email protected]>
This program is free software; you may redistribute and/or modify it under
the terms of the GNU General Public License Version 2 as published by the
Free Software Foundation.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for complete details.
The author respectfully requests that any modifications to this software be
sent directly to him for evaluation and testing.
Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose
advice has been invaluable, to David Gentzel, for writing the original Linux
BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site.
Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB
Manager available as freely redistributable source code.
*/
#define blogic_drvr_version "2.1.17"
#define blogic_drvr_date "12 September 2013"
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/stat.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/jiffies.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <scsi/scsicam.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include "BusLogic.h"
#include "FlashPoint.c"
#ifndef FAILURE
#define FAILURE (-1)
#endif
static struct scsi_host_template blogic_template;
/*
blogic_drvr_options_count is a count of the number of BusLogic Driver
Options specifications provided via the Linux Kernel Command Line or via
the Loadable Kernel Module Installation Facility.
*/
static int blogic_drvr_options_count;
/*
blogic_drvr_options is an array of Driver Options structures representing
BusLogic Driver Options specifications provided via the Linux Kernel Command
Line or via the Loadable Kernel Module Installation Facility.
*/
static struct blogic_drvr_options blogic_drvr_options[BLOGIC_MAX_ADAPTERS];
/*
BusLogic can be assigned a string by insmod.
*/
MODULE_LICENSE("GPL");
#ifdef MODULE
static char *BusLogic;
module_param(BusLogic, charp, 0);
#endif
/*
blogic_probe_options is a set of Probe Options to be applied across
all BusLogic Host Adapters.
*/
static struct blogic_probe_options blogic_probe_options;
/*
blogic_global_options is a set of Global Options to be applied across
all BusLogic Host Adapters.
*/
static struct blogic_global_options blogic_global_options;
static LIST_HEAD(blogic_host_list);
/*
blogic_probeinfo_count is the number of entries in blogic_probeinfo_list.
*/
static int blogic_probeinfo_count;
/*
blogic_probeinfo_list is the list of I/O Addresses and Bus Probe Information
to be checked for potential BusLogic Host Adapters. It is initialized by
interrogating the PCI Configuration Space on PCI machines as well as from the
list of standard BusLogic I/O Addresses.
*/
static struct blogic_probeinfo *blogic_probeinfo_list;
/*
blogic_cmd_failure_reason holds a string identifying the reason why a
call to blogic_cmd failed. It is only non-NULL when blogic_cmd
returns a failure code.
*/
static char *blogic_cmd_failure_reason;
/*
blogic_announce_drvr announces the Driver Version and Date, Author's
Name, Copyright Notice, and Electronic Mail Address.
*/
static void blogic_announce_drvr(struct blogic_adapter *adapter)
{
blogic_announce("***** BusLogic SCSI Driver Version " blogic_drvr_version " of " blogic_drvr_date " *****\n", adapter);
blogic_announce("Copyright 1995-1998 by Leonard N. Zubkoff " "<[email protected]>\n", adapter);
}
/*
blogic_drvr_info returns the Host Adapter Name to identify this SCSI
Driver and Host Adapter.
*/
static const char *blogic_drvr_info(struct Scsi_Host *host)
{
struct blogic_adapter *adapter =
(struct blogic_adapter *) host->hostdata;
return adapter->full_model;
}
/*
blogic_init_ccbs initializes a group of Command Control Blocks (CCBs)
for Host Adapter from the blk_size bytes located at blk_pointer. The newly
created CCBs are added to Host Adapter's free list.
*/
static void blogic_init_ccbs(struct blogic_adapter *adapter, void *blk_pointer,
int blk_size, dma_addr_t blkp)
{
struct blogic_ccb *ccb = (struct blogic_ccb *) blk_pointer;
unsigned int offset = 0;
memset(blk_pointer, 0, blk_size);
ccb->allocgrp_head = blkp;
ccb->allocgrp_size = blk_size;
while ((blk_size -= sizeof(struct blogic_ccb)) >= 0) {
ccb->status = BLOGIC_CCB_FREE;
ccb->adapter = adapter;
ccb->dma_handle = (u32) blkp + offset;
if (blogic_flashpoint_type(adapter)) {
ccb->callback = blogic_qcompleted_ccb;
ccb->base_addr = adapter->fpinfo.base_addr;
}
ccb->next = adapter->free_ccbs;
ccb->next_all = adapter->all_ccbs;
adapter->free_ccbs = ccb;
adapter->all_ccbs = ccb;
adapter->alloc_ccbs++;
ccb++;
offset += sizeof(struct blogic_ccb);
}
}
/*
blogic_create_initccbs allocates the initial CCBs for Host Adapter.
*/
static bool __init blogic_create_initccbs(struct blogic_adapter *adapter)
{
int blk_size = BLOGIC_CCB_GRP_ALLOCSIZE * sizeof(struct blogic_ccb);
void *blk_pointer;
dma_addr_t blkp;
while (adapter->alloc_ccbs < adapter->initccbs) {
blk_pointer = pci_alloc_consistent(adapter->pci_device,
blk_size, &blkp);
if (blk_pointer == NULL) {
blogic_err("UNABLE TO ALLOCATE CCB GROUP - DETACHING\n",
adapter);
return false;
}
blogic_init_ccbs(adapter, blk_pointer, blk_size, blkp);
}
return true;
}
/*
blogic_destroy_ccbs deallocates the CCBs for Host Adapter.
*/
static void blogic_destroy_ccbs(struct blogic_adapter *adapter)
{
struct blogic_ccb *next_ccb = adapter->all_ccbs, *ccb, *lastccb = NULL;
adapter->all_ccbs = NULL;
adapter->free_ccbs = NULL;
while ((ccb = next_ccb) != NULL) {
next_ccb = ccb->next_all;
if (ccb->allocgrp_head) {
if (lastccb)
pci_free_consistent(adapter->pci_device,
lastccb->allocgrp_size, lastccb,
lastccb->allocgrp_head);
lastccb = ccb;
}
}
if (lastccb)
pci_free_consistent(adapter->pci_device, lastccb->allocgrp_size,
lastccb, lastccb->allocgrp_head);
}
/*
blogic_create_addlccbs allocates Additional CCBs for Host Adapter. If
allocation fails and there are no remaining CCBs available, the Driver Queue
Depth is decreased to a known safe value to avoid potential deadlocks when
multiple host adapters share the same IRQ Channel.
*/
static void blogic_create_addlccbs(struct blogic_adapter *adapter,
int addl_ccbs, bool print_success)
{
int blk_size = BLOGIC_CCB_GRP_ALLOCSIZE * sizeof(struct blogic_ccb);
int prev_alloc = adapter->alloc_ccbs;
void *blk_pointer;
dma_addr_t blkp;
if (addl_ccbs <= 0)
return;
while (adapter->alloc_ccbs - prev_alloc < addl_ccbs) {
blk_pointer = pci_alloc_consistent(adapter->pci_device,
blk_size, &blkp);
if (blk_pointer == NULL)
break;
blogic_init_ccbs(adapter, blk_pointer, blk_size, blkp);
}
if (adapter->alloc_ccbs > prev_alloc) {
if (print_success)
blogic_notice("Allocated %d additional CCBs (total now %d)\n", adapter, adapter->alloc_ccbs - prev_alloc, adapter->alloc_ccbs);
return;
}
blogic_notice("Failed to allocate additional CCBs\n", adapter);
if (adapter->drvr_qdepth > adapter->alloc_ccbs - adapter->tgt_count) {
adapter->drvr_qdepth = adapter->alloc_ccbs - adapter->tgt_count;
adapter->scsi_host->can_queue = adapter->drvr_qdepth;
}
}
/*
blogic_alloc_ccb allocates a CCB from Host Adapter's free list,
allocating more memory from the Kernel if necessary. The Host Adapter's
Lock should already have been acquired by the caller.
*/
static struct blogic_ccb *blogic_alloc_ccb(struct blogic_adapter *adapter)
{
static unsigned long serial;
struct blogic_ccb *ccb;
ccb = adapter->free_ccbs;
if (ccb != NULL) {
ccb->serial = ++serial;
adapter->free_ccbs = ccb->next;
ccb->next = NULL;
if (adapter->free_ccbs == NULL)
blogic_create_addlccbs(adapter, adapter->inc_ccbs,
true);
return ccb;
}
blogic_create_addlccbs(adapter, adapter->inc_ccbs, true);
ccb = adapter->free_ccbs;
if (ccb == NULL)
return NULL;
ccb->serial = ++serial;
adapter->free_ccbs = ccb->next;
ccb->next = NULL;
return ccb;
}
/*
blogic_dealloc_ccb deallocates a CCB, returning it to the Host Adapter's
free list. The Host Adapter's Lock should already have been acquired by the
caller.
*/
static void blogic_dealloc_ccb(struct blogic_ccb *ccb, int dma_unmap)
{
struct blogic_adapter *adapter = ccb->adapter;
if (ccb->command != NULL)
scsi_dma_unmap(ccb->command);
if (dma_unmap)
pci_unmap_single(adapter->pci_device, ccb->sensedata,
ccb->sense_datalen, PCI_DMA_FROMDEVICE);
ccb->command = NULL;
ccb->status = BLOGIC_CCB_FREE;
ccb->next = adapter->free_ccbs;
adapter->free_ccbs = ccb;
}
/*
blogic_cmd sends the command opcode to adapter, optionally
providing paramlen bytes of param and receiving at most
replylen bytes of reply; any excess reply data is received but
discarded.
On success, this function returns the number of reply bytes read from
the Host Adapter (including any discarded data); on failure, it returns
-1 if the command was invalid, or -2 if a timeout occurred.
blogic_cmd is called exclusively during host adapter detection and
initialization, so performance and latency are not critical, and exclusive
access to the Host Adapter hardware is assumed. Once the host adapter and
driver are initialized, the only Host Adapter command that is issued is the
single byte Execute Mailbox Command operation code, which does not require
waiting for the Host Adapter Ready bit to be set in the Status Register.
*/
static int blogic_cmd(struct blogic_adapter *adapter, enum blogic_opcode opcode,
void *param, int paramlen, void *reply, int replylen)
{
unsigned char *param_p = (unsigned char *) param;
unsigned char *reply_p = (unsigned char *) reply;
union blogic_stat_reg statusreg;
union blogic_int_reg intreg;
unsigned long processor_flag = 0;
int reply_b = 0, result;
long timeout;
/*
Clear out the Reply Data if provided.
*/
if (replylen > 0)
memset(reply, 0, replylen);
/*
If the IRQ Channel has not yet been acquired, then interrupts
must be disabled while issuing host adapter commands since a
Command Complete interrupt could occur if the IRQ Channel was
previously enabled by another BusLogic Host Adapter or another
driver sharing the same IRQ Channel.
*/
if (!adapter->irq_acquired)
local_irq_save(processor_flag);
/*
Wait for the Host Adapter Ready bit to be set and the
Command/Parameter Register Busy bit to be reset in the Status
Register.
*/
timeout = 10000;
while (--timeout >= 0) {
statusreg.all = blogic_rdstatus(adapter);
if (statusreg.sr.adapter_ready && !statusreg.sr.cmd_param_busy)
break;
udelay(100);
}
if (timeout < 0) {
blogic_cmd_failure_reason =
"Timeout waiting for Host Adapter Ready";
result = -2;
goto done;
}
/*
Write the opcode to the Command/Parameter Register.
*/
adapter->adapter_cmd_complete = false;
blogic_setcmdparam(adapter, opcode);
/*
Write any additional Parameter Bytes.
*/
timeout = 10000;
while (paramlen > 0 && --timeout >= 0) {
/*
Wait 100 microseconds to give the Host Adapter enough
time to determine whether the last value written to the
Command/Parameter Register was valid or not. If the
Command Complete bit is set in the Interrupt Register,
then the Command Invalid bit in the Status Register will
be reset if the Operation Code or Parameter was valid
and the command has completed, or set if the Operation
Code or Parameter was invalid. If the Data In Register
Ready bit is set in the Status Register, then the
Operation Code was valid, and data is waiting to be read
back from the Host Adapter. Otherwise, wait for the
Command/Parameter Register Busy bit in the Status
Register to be reset.
*/
udelay(100);
intreg.all = blogic_rdint(adapter);
statusreg.all = blogic_rdstatus(adapter);
if (intreg.ir.cmd_complete)
break;
if (adapter->adapter_cmd_complete)
break;
if (statusreg.sr.datain_ready)
break;
if (statusreg.sr.cmd_param_busy)
continue;
blogic_setcmdparam(adapter, *param_p++);
paramlen--;
}
if (timeout < 0) {
blogic_cmd_failure_reason =
"Timeout waiting for Parameter Acceptance";
result = -2;
goto done;
}
/*
The Modify I/O Address command does not cause a Command Complete
Interrupt.
*/
if (opcode == BLOGIC_MOD_IOADDR) {
statusreg.all = blogic_rdstatus(adapter);
if (statusreg.sr.cmd_invalid) {
blogic_cmd_failure_reason =
"Modify I/O Address Invalid";
result = -1;
goto done;
}
if (blogic_global_options.trace_config)
blogic_notice("blogic_cmd(%02X) Status = %02X: " "(Modify I/O Address)\n", adapter, opcode, statusreg.all);
result = 0;
goto done;
}
/*
Select an appropriate timeout value for awaiting command completion.
*/
switch (opcode) {
case BLOGIC_INQ_DEV0TO7:
case BLOGIC_INQ_DEV8TO15:
case BLOGIC_INQ_DEV:
/* Approximately 60 seconds. */
timeout = 60 * 10000;
break;
default:
/* Approximately 1 second. */
timeout = 10000;
break;
}
/*
Receive any Reply Bytes, waiting for either the Command
Complete bit to be set in the Interrupt Register, or for the
Interrupt Handler to set the Host Adapter Command Completed
bit in the Host Adapter structure.
*/
while (--timeout >= 0) {
intreg.all = blogic_rdint(adapter);
statusreg.all = blogic_rdstatus(adapter);
if (intreg.ir.cmd_complete)
break;
if (adapter->adapter_cmd_complete)
break;
if (statusreg.sr.datain_ready) {
if (++reply_b <= replylen)
*reply_p++ = blogic_rddatain(adapter);
else
blogic_rddatain(adapter);
}
if (opcode == BLOGIC_FETCH_LOCALRAM &&
statusreg.sr.adapter_ready)
break;
udelay(100);
}
if (timeout < 0) {
blogic_cmd_failure_reason =
"Timeout waiting for Command Complete";
result = -2;
goto done;
}
/*
Clear any pending Command Complete Interrupt.
*/
blogic_intreset(adapter);
/*
Provide tracing information if requested.
*/
if (blogic_global_options.trace_config) {
int i;
blogic_notice("blogic_cmd(%02X) Status = %02X: %2d ==> %2d:",
adapter, opcode, statusreg.all, replylen,
reply_b);
if (replylen > reply_b)
replylen = reply_b;
for (i = 0; i < replylen; i++)
blogic_notice(" %02X", adapter,
((unsigned char *) reply)[i]);
blogic_notice("\n", adapter);
}
/*
Process Command Invalid conditions.
*/
if (statusreg.sr.cmd_invalid) {
/*
Some early BusLogic Host Adapters may not recover
properly from a Command Invalid condition, so if this
appears to be the case, a Soft Reset is issued to the
Host Adapter. Potentially invalid commands are never
attempted after Mailbox Initialization is performed,
so there should be no Host Adapter state lost by a
Soft Reset in response to a Command Invalid condition.
*/
udelay(1000);
statusreg.all = blogic_rdstatus(adapter);
if (statusreg.sr.cmd_invalid || statusreg.sr.rsvd ||
statusreg.sr.datain_ready ||
statusreg.sr.cmd_param_busy ||
!statusreg.sr.adapter_ready ||
!statusreg.sr.init_reqd ||
statusreg.sr.diag_active ||
statusreg.sr.diag_failed) {
blogic_softreset(adapter);
udelay(1000);
}
blogic_cmd_failure_reason = "Command Invalid";
result = -1;
goto done;
}
/*
Handle Excess Parameters Supplied conditions.
*/
if (paramlen > 0) {
blogic_cmd_failure_reason = "Excess Parameters Supplied";
result = -1;
goto done;
}
/*
Indicate the command completed successfully.
*/
blogic_cmd_failure_reason = NULL;
result = reply_b;
/*
Restore the interrupt status if necessary and return.
*/
done:
if (!adapter->irq_acquired)
local_irq_restore(processor_flag);
return result;
}
/*
blogic_add_probeaddr_isa appends a single ISA I/O Address to the list
of I/O Address and Bus Probe Information to be checked for potential BusLogic
Host Adapters.
*/
static void __init blogic_add_probeaddr_isa(unsigned long io_addr)
{
struct blogic_probeinfo *probeinfo;
if (blogic_probeinfo_count >= BLOGIC_MAX_ADAPTERS)
return;
probeinfo = &blogic_probeinfo_list[blogic_probeinfo_count++];
probeinfo->adapter_type = BLOGIC_MULTIMASTER;
probeinfo->adapter_bus_type = BLOGIC_ISA_BUS;
probeinfo->io_addr = io_addr;
probeinfo->pci_device = NULL;
}
/*
blogic_init_probeinfo_isa initializes the list of I/O Address and
Bus Probe Information to be checked for potential BusLogic SCSI Host Adapters
only from the list of standard BusLogic MultiMaster ISA I/O Addresses.
*/
static void __init blogic_init_probeinfo_isa(struct blogic_adapter *adapter)
{
/*
If BusLogic Driver Options specifications requested that ISA
Bus Probes be inhibited, do not proceed further.
*/
if (blogic_probe_options.noprobe_isa)
return;
/*
Append the list of standard BusLogic MultiMaster ISA I/O Addresses.
*/
if (!blogic_probe_options.limited_isa || blogic_probe_options.probe330)
blogic_add_probeaddr_isa(0x330);
if (!blogic_probe_options.limited_isa || blogic_probe_options.probe334)
blogic_add_probeaddr_isa(0x334);
if (!blogic_probe_options.limited_isa || blogic_probe_options.probe230)
blogic_add_probeaddr_isa(0x230);
if (!blogic_probe_options.limited_isa || blogic_probe_options.probe234)
blogic_add_probeaddr_isa(0x234);
if (!blogic_probe_options.limited_isa || blogic_probe_options.probe130)
blogic_add_probeaddr_isa(0x130);
if (!blogic_probe_options.limited_isa || blogic_probe_options.probe134)
blogic_add_probeaddr_isa(0x134);
}
#ifdef CONFIG_PCI
/*
blogic_sort_probeinfo sorts a section of blogic_probeinfo_list in order
of increasing PCI Bus and Device Number.
*/
static void __init blogic_sort_probeinfo(struct blogic_probeinfo
*probeinfo_list, int probeinfo_cnt)
{
int last_exchange = probeinfo_cnt - 1, bound, j;
while (last_exchange > 0) {
bound = last_exchange;
last_exchange = 0;
for (j = 0; j < bound; j++) {
struct blogic_probeinfo *probeinfo1 =
&probeinfo_list[j];
struct blogic_probeinfo *probeinfo2 =
&probeinfo_list[j + 1];
if (probeinfo1->bus > probeinfo2->bus ||
(probeinfo1->bus == probeinfo2->bus &&
(probeinfo1->dev > probeinfo2->dev))) {
struct blogic_probeinfo tmp_probeinfo;
memcpy(&tmp_probeinfo, probeinfo1,
sizeof(struct blogic_probeinfo));
memcpy(probeinfo1, probeinfo2,
sizeof(struct blogic_probeinfo));
memcpy(probeinfo2, &tmp_probeinfo,
sizeof(struct blogic_probeinfo));
last_exchange = j;
}
}
}
}
/*
blogic_init_mm_probeinfo initializes the list of I/O Address
and Bus Probe Information to be checked for potential BusLogic MultiMaster
SCSI Host Adapters by interrogating the PCI Configuration Space on PCI
machines as well as from the list of standard BusLogic MultiMaster ISA
I/O Addresses. It returns the number of PCI MultiMaster Host Adapters found.
*/
static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter)
{
struct blogic_probeinfo *pr_probeinfo =
&blogic_probeinfo_list[blogic_probeinfo_count];
int nonpr_mmindex = blogic_probeinfo_count + 1;
int nonpr_mmcount = 0, mmcount = 0;
bool force_scan_order = false;
bool force_scan_order_checked = false;
bool addr_seen[6];
struct pci_dev *pci_device = NULL;
int i;
if (blogic_probeinfo_count >= BLOGIC_MAX_ADAPTERS)
return 0;
blogic_probeinfo_count++;
for (i = 0; i < 6; i++)
addr_seen[i] = false;
/*
Iterate over the MultiMaster PCI Host Adapters. For each
enumerated host adapter, determine whether its ISA Compatible
I/O Port is enabled and if so, whether it is assigned the
Primary I/O Address. A host adapter that is assigned the
Primary I/O Address will always be the preferred boot device.
The MultiMaster BIOS will first recognize a host adapter at
the Primary I/O Address, then any other PCI host adapters,
and finally any host adapters located at the remaining
standard ISA I/O Addresses. When a PCI host adapter is found
with its ISA Compatible I/O Port enabled, a command is issued
to disable the ISA Compatible I/O Port, and it is noted that the
particular standard ISA I/O Address need not be probed.
*/
pr_probeinfo->io_addr = 0;
while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC,
PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER,
pci_device)) != NULL) {
struct blogic_adapter *host_adapter = adapter;
struct blogic_adapter_info adapter_info;
enum blogic_isa_ioport mod_ioaddr_req;
unsigned char bus;
unsigned char device;
unsigned int irq_ch;
unsigned long base_addr0;
unsigned long base_addr1;
unsigned long io_addr;
unsigned long pci_addr;
if (pci_enable_device(pci_device))
continue;
if (pci_set_dma_mask(pci_device, DMA_BIT_MASK(32)))
continue;
bus = pci_device->bus->number;
device = pci_device->devfn >> 3;
irq_ch = pci_device->irq;
io_addr = base_addr0 = pci_resource_start(pci_device, 0);
pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
blogic_err("BusLogic: Base Address0 0x%X not I/O for " "MultiMaster Host Adapter\n", NULL, base_addr0);
blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr);
continue;
}
if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
blogic_err("BusLogic: Base Address1 0x%X not Memory for " "MultiMaster Host Adapter\n", NULL, base_addr1);
blogic_err("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, bus, device, pci_addr);
continue;
}
if (irq_ch == 0) {
blogic_err("BusLogic: IRQ Channel %d invalid for " "MultiMaster Host Adapter\n", NULL, irq_ch);
blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr);
continue;
}
if (blogic_global_options.trace_probe) {
blogic_notice("BusLogic: PCI MultiMaster Host Adapter " "detected at\n", NULL);
blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, bus, device, io_addr, pci_addr);
}
/*
Issue the Inquire PCI Host Adapter Information command to determine
the ISA Compatible I/O Port. If the ISA Compatible I/O Port is
known and enabled, note that the particular Standard ISA I/O
Address should not be probed.
*/
host_adapter->io_addr = io_addr;
blogic_intreset(host_adapter);
if (blogic_cmd(host_adapter, BLOGIC_INQ_PCI_INFO, NULL, 0,
&adapter_info, sizeof(adapter_info)) ==
sizeof(adapter_info)) {
if (adapter_info.isa_port < 6)
addr_seen[adapter_info.isa_port] = true;
} else
adapter_info.isa_port = BLOGIC_IO_DISABLE;
/*
Issue the Modify I/O Address command to disable the
ISA Compatible I/O Port. On PCI Host Adapters, the
Modify I/O Address command allows modification of the
ISA compatible I/O Address that the Host Adapter
responds to; it does not affect the PCI compliant
I/O Address assigned at system initialization.
*/
mod_ioaddr_req = BLOGIC_IO_DISABLE;
blogic_cmd(host_adapter, BLOGIC_MOD_IOADDR, &mod_ioaddr_req,
sizeof(mod_ioaddr_req), NULL, 0);
/*
For the first MultiMaster Host Adapter enumerated,
issue the Fetch Host Adapter Local RAM command to read
byte 45 of the AutoSCSI area, for the setting of the
"Use Bus And Device # For PCI Scanning Seq." option.
Issue the Inquire Board ID command since this option is
only valid for the BT-948/958/958D.
*/
if (!force_scan_order_checked) {
struct blogic_fetch_localram fetch_localram;
struct blogic_autoscsi_byte45 autoscsi_byte45;
struct blogic_board_id id;
fetch_localram.offset = BLOGIC_AUTOSCSI_BASE + 45;
fetch_localram.count = sizeof(autoscsi_byte45);
blogic_cmd(host_adapter, BLOGIC_FETCH_LOCALRAM,
&fetch_localram, sizeof(fetch_localram),
&autoscsi_byte45,
sizeof(autoscsi_byte45));
blogic_cmd(host_adapter, BLOGIC_GET_BOARD_ID, NULL, 0,
&id, sizeof(id));
if (id.fw_ver_digit1 == '5')
force_scan_order =
autoscsi_byte45.force_scan_order;
force_scan_order_checked = true;
}
/*
Determine whether this MultiMaster Host Adapter has its
ISA Compatible I/O Port enabled and is assigned the
Primary I/O Address. If it does, then it is the Primary
MultiMaster Host Adapter and must be recognized first.
If it does not, then it is added to the list for probing
after any Primary MultiMaster Host Adapter is probed.
*/
if (adapter_info.isa_port == BLOGIC_IO_330) {
pr_probeinfo->adapter_type = BLOGIC_MULTIMASTER;
pr_probeinfo->adapter_bus_type = BLOGIC_PCI_BUS;
pr_probeinfo->io_addr = io_addr;
pr_probeinfo->pci_addr = pci_addr;
pr_probeinfo->bus = bus;
pr_probeinfo->dev = device;
pr_probeinfo->irq_ch = irq_ch;
pr_probeinfo->pci_device = pci_dev_get(pci_device);
mmcount++;
} else if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) {
struct blogic_probeinfo *probeinfo =
&blogic_probeinfo_list[blogic_probeinfo_count++];
probeinfo->adapter_type = BLOGIC_MULTIMASTER;
probeinfo->adapter_bus_type = BLOGIC_PCI_BUS;
probeinfo->io_addr = io_addr;
probeinfo->pci_addr = pci_addr;
probeinfo->bus = bus;
probeinfo->dev = device;
probeinfo->irq_ch = irq_ch;
probeinfo->pci_device = pci_dev_get(pci_device);
nonpr_mmcount++;
mmcount++;
} else
blogic_warn("BusLogic: Too many Host Adapters " "detected\n", NULL);
}
/*
If the AutoSCSI "Use Bus And Device # For PCI Scanning Seq."
option is ON for the first enumerated MultiMaster Host Adapter,
and if that host adapter is a BT-948/958/958D, then the
MultiMaster BIOS will recognize MultiMaster Host Adapters in
the order of increasing PCI Bus and Device Number. In that case,
sort the probe information into the same order the BIOS uses.
If this option is OFF, then the MultiMaster BIOS will recognize
MultiMaster Host Adapters in the order they are enumerated by
the PCI BIOS, and hence no sorting is necessary.
*/
if (force_scan_order)
blogic_sort_probeinfo(&blogic_probeinfo_list[nonpr_mmindex],
nonpr_mmcount);
/*
If no PCI MultiMaster Host Adapter is assigned the Primary
I/O Address, then the Primary I/O Address must be probed
explicitly before any PCI host adapters are probed.
*/
if (!blogic_probe_options.noprobe_isa)
if (pr_probeinfo->io_addr == 0 &&
(!blogic_probe_options.limited_isa ||
blogic_probe_options.probe330)) {
pr_probeinfo->adapter_type = BLOGIC_MULTIMASTER;
pr_probeinfo->adapter_bus_type = BLOGIC_ISA_BUS;
pr_probeinfo->io_addr = 0x330;
}
/*
Append the list of standard BusLogic MultiMaster ISA I/O Addresses,
omitting the Primary I/O Address which has already been handled.
*/
if (!blogic_probe_options.noprobe_isa) {
if (!addr_seen[1] &&
(!blogic_probe_options.limited_isa ||
blogic_probe_options.probe334))
blogic_add_probeaddr_isa(0x334);
if (!addr_seen[2] &&
(!blogic_probe_options.limited_isa ||
blogic_probe_options.probe230))
blogic_add_probeaddr_isa(0x230);
if (!addr_seen[3] &&
(!blogic_probe_options.limited_isa ||
blogic_probe_options.probe234))
blogic_add_probeaddr_isa(0x234);
if (!addr_seen[4] &&
(!blogic_probe_options.limited_isa ||
blogic_probe_options.probe130))
blogic_add_probeaddr_isa(0x130);
if (!addr_seen[5] &&
(!blogic_probe_options.limited_isa ||
blogic_probe_options.probe134))
blogic_add_probeaddr_isa(0x134);
}
/*
Iterate over the older non-compliant MultiMaster PCI Host Adapters,
noting the PCI bus location and assigned IRQ Channel.
*/
pci_device = NULL;
while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC,
PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC,
pci_device)) != NULL) {
unsigned char bus;
unsigned char device;
unsigned int irq_ch;
unsigned long io_addr;
if (pci_enable_device(pci_device))
continue;
if (pci_set_dma_mask(pci_device, DMA_BIT_MASK(32)))
continue;
bus = pci_device->bus->number;
device = pci_device->devfn >> 3;
irq_ch = pci_device->irq;
io_addr = pci_resource_start(pci_device, 0);
if (io_addr == 0 || irq_ch == 0)
continue;
for (i = 0; i < blogic_probeinfo_count; i++) {
struct blogic_probeinfo *probeinfo =
&blogic_probeinfo_list[i];
if (probeinfo->io_addr == io_addr &&
probeinfo->adapter_type == BLOGIC_MULTIMASTER) {
probeinfo->adapter_bus_type = BLOGIC_PCI_BUS;
probeinfo->pci_addr = 0;
probeinfo->bus = bus;
probeinfo->dev = device;
probeinfo->irq_ch = irq_ch;
probeinfo->pci_device = pci_dev_get(pci_device);
break;
}
}
}
return mmcount;
}
/*
blogic_init_fp_probeinfo initializes the list of I/O Address
and Bus Probe Information to be checked for potential BusLogic FlashPoint
Host Adapters by interrogating the PCI Configuration Space. It returns the
number of FlashPoint Host Adapters found.
*/
static int __init blogic_init_fp_probeinfo(struct blogic_adapter *adapter)
{
int fpindex = blogic_probeinfo_count, fpcount = 0;
struct pci_dev *pci_device = NULL;
/*
Interrogate PCI Configuration Space for any FlashPoint Host Adapters.
*/
while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC,
PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT,
pci_device)) != NULL) {
unsigned char bus;
unsigned char device;
unsigned int irq_ch;
unsigned long base_addr0;
unsigned long base_addr1;
unsigned long io_addr;
unsigned long pci_addr;
if (pci_enable_device(pci_device))
continue;
if (pci_set_dma_mask(pci_device, DMA_BIT_MASK(32)))
continue;
bus = pci_device->bus->number;
device = pci_device->devfn >> 3;
irq_ch = pci_device->irq;
io_addr = base_addr0 = pci_resource_start(pci_device, 0);
pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
#ifdef CONFIG_SCSI_FLASHPOINT
if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
blogic_err("BusLogic: Base Address0 0x%X not I/O for " "FlashPoint Host Adapter\n", NULL, base_addr0);
blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr);
continue;
}
if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
blogic_err("BusLogic: Base Address1 0x%X not Memory for " "FlashPoint Host Adapter\n", NULL, base_addr1);
blogic_err("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, bus, device, pci_addr);
continue;
}
if (irq_ch == 0) {
blogic_err("BusLogic: IRQ Channel %d invalid for " "FlashPoint Host Adapter\n", NULL, irq_ch);
blogic_err("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, bus, device, io_addr);
continue;
}
if (blogic_global_options.trace_probe) {
blogic_notice("BusLogic: FlashPoint Host Adapter " "detected at\n", NULL);
blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, bus, device, io_addr, pci_addr);
}
if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) {
struct blogic_probeinfo *probeinfo =
&blogic_probeinfo_list[blogic_probeinfo_count++];
probeinfo->adapter_type = BLOGIC_FLASHPOINT;
probeinfo->adapter_bus_type = BLOGIC_PCI_BUS;
probeinfo->io_addr = io_addr;
probeinfo->pci_addr = pci_addr;
probeinfo->bus = bus;
probeinfo->dev = device;
probeinfo->irq_ch = irq_ch;
probeinfo->pci_device = pci_dev_get(pci_device);
fpcount++;
} else
blogic_warn("BusLogic: Too many Host Adapters " "detected\n", NULL);
#else
blogic_err("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", NULL, bus, device);
blogic_err("BusLogic: I/O Address 0x%X PCI Address 0x%X, irq %d, " "but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch);
blogic_err("BusLogic: support was omitted in this kernel " "configuration.\n", NULL);