forked from rascalmicro/u-boot-rascal
-
Notifications
You must be signed in to change notification settings - Fork 137
/
README.mpc85xx-sd-spi-boot
75 lines (55 loc) · 2.43 KB
/
README.mpc85xx-sd-spi-boot
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
----------------------------------------
Booting from On-Chip ROM (eSDHC or eSPI)
----------------------------------------
boot_format is a tool to write SD bootable images to a filesystem and build
SD/SPI images to a binary file for writing later.
When booting from an SD card/MMC, boot_format puts the configuration file and
the RAM-based U-Boot image on the card.
When booting from an EEPROM, boot_format generates a binary image that is used
to boot from this EEPROM.
Where to get boot_format:
========================
you can browse it online at:
https://github.com/nxp-qoriq-yocto-sdk/boot-format
Building
========
Run the following to build this project
$ make
Execution
=========
boot_format runs under a regular Linux machine and requires a super user mode
to run. Execute boot_format as follows.
For building SD images by writing directly to a file system on SD media:
$ boot_format $config u-boot.bin -sd $device
Where $config is the included config.dat file for your platform and $device
is the target block device for the SD media on your computer.
For build binary images directly a local file:
$ boot_format $config u-boot.bin -spi $file
Where $file is the target file. Also keep in mind the u-boot.bin file needs
to be the u-boot built for your particular platform and target media.
Example: To generate a u-boot.bin for a P1022DS booting from SD, run the
following in the u-boot repository:
$ make P1022DS_SDCARD
Configuration Files
===================
Below are the configuration files to be used with a particular platform. Keep
in mind that some of these config files are tied to the platforms DDR speed.
Please see the SoC reference manual for more documentation.
P1022DS config_sram_p1022ds.dat
P2020DS config_sram_p2020ds.dat
P1020RDB config_ddr2_1g_p1020rdb_533M.dat
P1020RDB config_ddr2_1g_p1020rdb_667M.dat
P2020RDB config_ddr2_1g_p2020rdb_800M.dat
P2020RDB config_ddr2_1g_p2020rdb_667M.dat
P2020RDB config_ddr3_1gb_64bit_p2020rdb_pc.dat
P1020RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1011RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1010RDB config_ddr3_1gb_p1010rdb_800M.dat
P1021RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1022DS config_ddr3_2gb_p1022ds.dat
P1024RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
P1025RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
P1016RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
P1020UTM config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1020MBG config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
MPC8536DS config_ddr2_512m_mpc8536ds_667M.dat