From dca9790f421143790c84b91133aab4c695498e25 Mon Sep 17 00:00:00 2001 From: whosawhatsis Date: Fri, 4 Apr 2014 10:13:44 -0700 Subject: [PATCH] Update Readme descriptions for M200, M207 and M208 --- README.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index e85be7c3ebdd..551c53075c80 100644 --- a/README.md +++ b/README.md @@ -204,15 +204,15 @@ M Codes * M140 - Set bed target temp * M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating * Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling -* M200 - Set filament diameter +* M200 D- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters). * M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) * M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! * M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec * M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer underruns and M20 minimum feedrate * M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk * M206 - set additional homeing offset -* M207 - set retract length S[positive mm] F[feedrate mm/sec] Z[additional zlift/hop] -* M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec] +* M207 - set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting +* M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/min] * M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. * M218 - set hotend offset (in mm): T X Y * M220 S- set speed factor override percentage