epub2txt -- Extract text from EPUB documents

Version 2.02, May 2020

What is this?

epub2txt is a simple command-line utility for extracting text from EPUB documents and, optionally, re-flowing it to fit a text display of a particular number of columns. It is written entirely in ANSI-standard C, and should run on any Unix-like system with a C compiler. It is intended for reading EPUB e-books on embedded systems that can't host a graphical EPUB viewer, or converting such e-books to read on those systems. However, it should be robust enough for other purposes, such as batch indexing of EPUB document collections.

epub2txt favours speed and low memory usage over accuracy of rendering. Most of the formatting of the source document will be lost but, with a text-only display, this is likely to be of little consequence.

This utility is specifically written to have no dependencies on external libraries, except the standard C library, and even on this it makes few demands. It does expect to be able to run an "unzip" command, however. The purpose of minimizing dependencies is to allow the utility to build on embedded systems without needing to build a bunch of dependencies first.

epub2txt will output UTF8-encoded text by default, but can be told to output ASCII, in which case it will try to convert non-ASCII characters into something displayable if possible.

Differences from epub2txt version 1.x

epub2txt version 2.0 is a more-or-less complete reimplementation, compared to the earlier 1.x releases. Not only has the internal logic been changed to improve multi-byte character support, but the command-line switches have been updated, to make the utility easier to use in the more common scenarios. Some features from 1.x have been ommitted in this new version, since they added complexity and did not seem to be used much.

• All character processing is now done using 32-bit, rather than 8-bit, characters, so each character requires exactly 32 bits. This makes formatting text that contains non-English characters much easier and, hopefully, more accurate, since the program no longer has to do complicated fiddling with multi-byte characters
• Where the source document uses "simple" formatting tags, like <h1> for headings and and <b> for bold, epub2txt will output ANSI highlighting characters if the program is run from a terminal. This feature can be turned off, if required, but will be used by default
• epub2txt tries to determine the actual width of the terminal and, in most cases, the user should not have to specify it
• It is assumed that output should be formatted to fit the width of a terminal, whenever a the program is run from a terminal. To override this behaviour, specify a width of zero (-w 0)
• There is a new --raw switch that does essentially what --notrim -w 0 did in the previous version, and also implies no ANSI highlighting (--noansi).

Prerequisites

epub2txt is intended to run on Linux and other Unix-like systems. It makes use of the common Unix unzip utility but has no other dependencies. It builds and runs on Windows under Cygwin, and under the Windows 10 Linux subsystem (WSL), but not as a native Windows console application. The system must be set up such that there is a temporary directory at /tmp that users can write to, unless the environment variable TMP is set, in which case that will be used instead.

Building and installing

epub2txt is already available for a number of Linux distributions, but to get the latest version it is usually best to build from source. This should be straightforward if gcc and make are installed. All you should need to do is

$ make
$ sudo make install

Command-line switches

For a full list, run epub2txt --help.

-a, --asiii

Reduces multi-byte charaters to 7-bit ASCII if possible. Some very common characters are easilty converted, like the various Unicode spaces, which can be converted into plain ASCII spaces. Common accented characters (.e.,g "é" are converted -- for better or worse -- into their non-accented equivalents. Some single-character entities like © can be coverted into mult-character equivalents, like "(c)". What epub2txt won't do is to convert multi-byte characters into single-byte characters in some form of "extended ASCII" character set. Those days are gone, and I'm not going to help bring them back.

-n, --noansi

Don't output ANSI terminal highlights. If epub2txt is run from a console, it will interpret common HTML formatting in the source document (such as <h1> for headings and
<b> for bold) by outputing ANSI highlight characters. Most (all?) Linux terminals understand these characters, and render the text with some sort of emphasis. In practice, most EPUB authors and converters don't use simple HTML markup (more's the pity), and even simple italic emphasis often uses custom style classes. So in many cases, no ANSI highlights will be seen. Moreover, some text processing utilties, like the common more, don't handle them properly. In such cases, use --noansi to switch this feature off.

-r, --raw

Don't process text data in any way -- just dump paragraphs of text exactly as they appear in the source document. Because some XHTML tags effectively create a paragraph break, without actually using explicit paragraph divisions, epub2txt will output a newline at the end of every such tag when it appears in the EPUB document. Without this treatment, many documents would render as one enormous line of text. However, sequences of empty lines might appear in the output.

-w, --width=N

Format the output for a display with N columns. If either the standard input or standard output of the epub2txt program is a terminal, the program will try to work out how wide it is. If it can't, it will assume 80 characters. The implication of using standard input to determine terminal width is that epub2txt still assumes it must produced fixed-width output, even if output is redirected to some other utility. This makes it possible to use epub2txt without specific command-line switches in common modes of operation like:

$ epub2txt myfile.epub | more

The more utility cannot wrap lines neatly on its own, so disabling line wrapping when stdout is redirected would create additional work for the user.

To turn off line wrapping specify -w 0, or --raw. The difference between these modes is that -w 0 still collapses whitespace and mutliple blank lines, whilst --raw just outputs all text in the document, exactly as presented.

Hints

Make a list of all unique words in an EPUB file, for indexing purposes:

$ epub2txt  --raw file.epub |tr -cs A-Za-z\' '\n' |  tr A-Z a-z |sort|uniq

Using --raw here speeds things up, as there is no need for epub2txt to format the output, if it is just going to be used to make a word list.

Read an EPUB on screen, with left justification, using ANSI highlight codes for headings, etc., if the document uses simple formatting tags:

$ epub2txt file.epub | less -RS 

This is a convenient way to read an EPUB document when a graphical viewer is not available. The -R switch to less tells it to respect ANSI highlight characters, which it can usually do without losing track of how much text is on a line.

Read an EPUB on screen with full (left and right) justification:

$ epub2txt file.epub --noansi -w 0 | groff -K utf8 -Tascii | less 

Note that groff can't handle ANSI terminal highlight characters as input, so these need to be disabled.

Bugs and limitations

There is no support for any form of DRM or encryption, and such support is unlikely to be added in the future.

epub2txt only handles documents that use UTF8 (or ASCII) encoding (but I believe that UTF8 is more-or-less universal in EPUB), and writes output only in UTF8 encoding, regardless of the platform's locale. This limitation exists because epub2txt does all its own character encoding conversions to avoid creating a dependency on an external library. Doing this for UTF8 is enough work on its own; doing it for arbitrary encodings would be overwhelming.

The program can't correct errors in encoding, and there are a large number of EPUB documents in public repositories that contain encoding errors. A common problem is spurious use of non-UTF8 8-bit characters, often in documents that have been converted from Microsoft Office applications.

epub2txt does not right-justify text, as there are already many good utilities to do this (e.g., groff)

epub2txt extracts text aggressively, and will include things that cannot possibly be rendered properly in plain text. This includes constructs like indices and tables of contents, which will be of little use. The captions of pictures will also likely be included, even though the pictures themselves can not. It seemed better to err on the side of extracting too much text than too little; unfortunately there is little in the EPUB format to distinguish content that is meaningful in a text-only representation from that which is not.

It is unlikely that any kind of fixed-layout structure of the source document will be rendered accurately in plain text, so epub2txt does not try. Tabs and other layout elements are collapsed into spaces, and text re-flowed according to the line length (except in raw mode).

Conversion of Unicode to ASCII is, in the general case, impossible. The --ascii switch tells epub2txt to perform some common conversions, such as straight quotes for angled quotes. It will also attempt to replace accented latin characters with non-accented equivalents, at least for commonly-used characters. However, there are a huge number of characters in the Unicode set that cannot be rendered, even approximately, in ASCII.

Revision history

Date	Change
2.02, May 2020	Updated XML parser
2.01, January 2019	Various bug fixes
2.0, October 2017	Completely re-written to do all text processing using 32-bit character arrays, rather than UTF-8 strings, to improve handling of non-English documents.
0.1.5, September 2017	Some fixes related to line-wrapping with multi-byte characters; support (after a fashion) for manifest files with namespaces.
0.1.4, May 2017	Remove unnecessary KBOX support kludges
0.1.3, March 2016	Fixed a bug that caused epub2txt to fail when XML files contained a UTF-8 BOM
0.1.2, September 2015	Fixed a bug that caused strings like "%222022020," which might legitimately appear in URLs, to be treated as text length specifiers.
0.1.1, April 2015	Fixed some bugs with integer sizes that caused problems on 64-bit systems
0.0.1	First functional release

Author and legal

epub2txt is maintained by Kevin Boone, and distributed under the terms of the GNU Public Licence, v3.0. Essentially, this means that you may use this software as you wish, at your own risk, provided that the original author continues to be acknowledged.