functions.Rmd

---
knit: bookdown::preview_chapter
---

# Functions

One of the best ways to improve your reach as a data scientist is to write functions. Functions allow you to automate common tasks. Writing a function has three big advantages over using copy-and-paste:

1.  You drastically reduce the chances of making incidental mistakes when
    you copy and paste.
    
1.  As requirements change, you only need to update code in one place, instead
    of many.
    
1.  You can give a function an evocative name that makes your code easier to 
    understand.

Writing good functions is a lifetime journey. Even after using R for many years we still learn new techniques and better ways of approaching old problems. The goal of this chapter is not to master every esoteric detail of functions but to get you started with some pragmatic advice that you can start using right away.

As well as practical advice for writing functions, this chapter also gives you some suggestions for how to style your code. Good coding style is like using correct punctuation. You can manage without it, but it sure makes things easier to read. As with styles of punctuation, there are many possible variations. Here we present the style we use in our code, but the most important thing is to be consistent.

## When should you write a function?

You should consider writing a function whenever you've copied and pasted a block of code more than twice (i.e. you now have three copies of the same code). For example, take a look at this code. What does it do?

```{r}
df <- data.frame(
  a = rnorm(10),
  b = rnorm(10),
  c = rnorm(10),
  d = rnorm(10)
)

df$a <- (df$a - min(df$a, na.rm = TRUE)) / 
  (max(df$a, na.rm = TRUE) - min(df$a, na.rm = TRUE))
df$b <- (df$b - min(df$b, na.rm = TRUE)) / 
  (max(df$a, na.rm = TRUE) - min(df$b, na.rm = TRUE))
df$c <- (df$c - min(df$c, na.rm = TRUE)) / 
  (max(df$c, na.rm = TRUE) - min(df$c, na.rm = TRUE))
df$d <- (df$d - min(df$d, na.rm = TRUE)) / 
  (max(df$d, na.rm = TRUE) - min(df$d, na.rm = TRUE))
```

You might be able to puzzle out that this rescales each column to have a range from 0 to 1. But did you spot the mistake? I made an error when copying-and-pasting the code for `df$b`: I forgot to change an `a` to a `b`. Extracting repeated code out into a function is a good idea because it prevents you from making this type of mistake.

To write a function you need to first analyse the code. How many inputs does it have?

```{r, eval = FALSE}
(df$a - min(df$a, na.rm = TRUE)) /
  (max(df$a, na.rm = TRUE) - min(df$a, na.rm = TRUE))
```

This code only has one input: `df$a`. (It's a little suprisingly that `TRUE` is not an input: you can explore why in the exercise below). To make the single input more clear, it's a good idea to rewrite the code using temporary variables with a general name. Here this function only takes one vector of input, so I'll call it `x`:

```{r}
x <- 1:10
(x - min(x, na.rm = TRUE)) / (max(x, na.rm = TRUE) - min(x, na.rm = TRUE))
```

There is some duplication in this code. We're computing the range of the data three times, but it makes sense to do it in one step:

```{r}
rng <- range(x, na.rm = TRUE)
(x - rng[1]) / (rng[2] - rng[1])
```

Pulling out intermediate calculations into named variables is a good practice because it makes it more clear what the code is doing. Now that I've simplified the code, and checked that it still works, I can turn it into a function:

```{r}
rescale01 <- function(x) {
  rng <- range(x, na.rm = TRUE)
  (x - rng[1]) / (rng[2] - rng[1])
}
rescale01(c(0, 5, 10))
```

There are three key steps to creating a new function:

1.  You need to pick a __name__ for the function. Here I've used `rescale01` 
    because this function rescales a vector to lie between 0 and 1.

1.  You list the inputs, or __arguments__, to the function inside `function`.
    Here we have just one argument. If we had more the call would look like
    `function(x, y, z)`.

1.  You place the __body__ of the function inside a `{` block immediately
    following `function`.

Note the overall process: I only made the function after I'd figured out how to make it work with a simple input. It's easier to start with working code and turn it into a function; it's harder to create a function and then try to make it work.

At this point it's a good idea to check your function with a few different inputs:

```{r}
rescale01(c(-10, 0, 10))
rescale01(c(1, 2, 3, NA, 5))
```

As you write more and more functions you'll eventually want to convert these informal, interactive tests into formal, automated tests. That process is called unit testing. Unfortunately, it's beyond the scope of this book, but you can learn about it in <http://r-pkgs.had.co.nz/tests.html>.

We can simplify the original example now that we have a function:

```{r}
df$a <- rescale01(df$a)
df$b <- rescale01(df$b)
df$c <- rescale01(df$c)
df$d <- rescale01(df$d)
```

Compared to the original, this code is easier to understand and we've eliminated one class of copy-and-paste errors. There is still quite a bit of duplication since we're doing the same thing to multiple columns. We'll learn how to eliminate that duplication in the next chapter.

### Practice

1.  Why is `TRUE` not a parameter to `rescale01()`? What would happen if
    `x` contained a single missing value, and `na.rm` was `FALSE`?

1.  Practice turning the following code snippets into functions. Think about 
    what each function does. What would you call it? How many arguments does it
    need? Can you rewrite it to be more expressive or less duplicative?

    ```{r, eval = FALSE}
    mean(is.na(x))
    
    x / sum(x, na.rm = TRUE)
    
    sd(x, na.rm = TRUE) / mean(x, na.rm = TRUE)
    ```

1.  Follow <http://nicercode.github.io/intro/writing-functions.html> to 
    write your own functions to compute the variance and skew of a vector.

1.  Implement a `fizzbuzz` function. It take a single number as input. If
    the number is divisible by three, return "fizz". If it's divisible by
    five return "buzz". If it's divisible by three and five, return "fizzbuzz".
    Otherwise, return the number. Make sure you first write working code, 
    before you create the function.
    
1.  Write `both_na()`, a function that takes two vectors of the same length 
    and returns the number of positions that have an `NA` in both vectors.

1.  What do the following functions do? Why are they useful even though they
    are so short?
    
    ```{r}
    is_directory <- function(x) file.info(x)$isdir
    is_readable <- function(x) file.access(x, 4) == 0
    ```

1.  Read the [complete lyrics](https://en.wikipedia.org/wiki/Little_Bunny_Foo_Foo) 
    to "Little Bunny Foo Foo". There's a lot of duplication in this song. 
    Extend the initial piping example to recreate the complete song, and use 
    functions to reduce the duplication.

## Functions are for humans and computers

It's important to remember that functions are not just for the computer, but are also for humans. R doesn't care what your function is called, or what comments it contains, but these are important for human readers. This section discusses some things that you should bear in mind when writing functions that humans can understand.

The name of a function is important. Ideally the name of your function will be short, but clearly evoke what the function does. However, it's hard to come up with concise names, and autocomplete makes it easy to type long names, so it's better to err on the side of clear descriptions, rather than short names. 

Generally, function names should be verbs, and arguments should be nouns. There are some exceptions: nouns are ok if the function computes a very well known noun (i.e. `mean()` is better than `compute_mean()`), or accessing some property of an object (i.e. `coef()` is better than `get_coefficients()`). A good sign that a noun might be a better choice is if you're using a very broad verb like "get", "compute", "calculate", or determine. Use your best judgement and don't be afraid to rename a function if you later figure out a better name.

```{r, eval = FALSE}
# Too short
f()

# Not a verb, or descriptive
my_awesome_function()

# Long, but clear
impute_missing()
collapse_years()
```

If your function name is composed of multiple words, I recommend using "snake\_case", where each word is lower case and separated by an underscore. camelCase is a popular alternative alternative, but be consistent: pick one or the other and stick with it. R itself is not very consistent, but there's nothing you can do about that. Make sure you don't fall into the same trap by making your code as consistent as possible.

```{r, eval = FALSE}
# Never do this!
col_mins()
rowMaxes()
```

If you have a family of functions that do similar things, make sure they have consistent names and arguments. Use a common prefix to indicate that they are connected. That's better than a common suffix because autocomplete allows you to type the prefix and see all the members of the family.

```{r, eval = FALSE}
# Good
input_select
input_checkbox
input_text

# Not so good
select_input
checkbox_input
text_input
```

Where possible, avoid overriding existing functions and variables. It's impossible to do in general because so many good names are already taken by other packages, but avoiding the most common names from base R will avoid confusion.

```{r, eval = FALSE}
# Don't do this!
T <- FALSE
c <- 10
mean <- function(x) sum(x)
```

Use comments, lines starting with `#`, to explain the "why" of your code. You generally should avoid comments that explain the "what" or the "how". If you can't understand what the code does from reading it, you should think about how to rewrite it to be more clear. Do you need to add some intermediate variables with useful names? Do you need to break out a subcomponent of a large function so you can name it? However, your code can never capture the reasoning behind your decisions: why did you choose this approach instead of an alternative? What else did you try that didn't work? It's a great idea to capture that sort of thinking in a comment.

Another important use of comments is to break up your file into easily readable chunks. Use long lines of `-` and `=` to make it easy to spot the breaks. RStudio even provides a keyboard shortcut for this: Cmd/Ctrl + Shift + R. 

```{r, eval = FALSE}
# Load data --------------------------------------

# Plot data --------------------------------------
```

### Exercises

1.  Read the source code for each of the following three functions, puzzle out
    what they do, and then brainstorm good names.
    
    ```{r}
    f1 <- function(string, prefix) {
      substr(string, 1, nchar(prefix)) == prefix
    }
    f2 <- function(x) {
      if (length(x) <= 1) return(NULL)
      x[-length(x)]
    }
    f3 <- function(x, y) {
      rep(y, length.out = length(x))
    }
    ```
    
1.  Take a function that you've written recently and spend 5 minutes 
    brainstorming a better name for it and its arguments.

1.  Compare and contrast `rnorm()` and `MASS::mvrnorm()`. How could you make
    them more consistent? 
    
1.  Make a case for why `normr()`, `normd()` etc would be better than
    `rnorm()`, `dnorm()`. Make a case for the opposite.

## Conditional execution

An `if` statement allows you to conditionally execute code. It looks like this:

```{r, eval = FALSE}
if (condition) {
  # code executed when condition is TRUE
} else {
  # code executed when condition is FALSE
}
```

To get help on `if` you need to surround it in backticks: `` ?`if` ``.

Here's a simple function that uses an if statement. The goal of this function is to return a logical vector describing whether or not each element of a vector is named.

```{r}
has_name <- function(x) {
  nms <- names(x)
  if (is.null(nms)) {
    rep(FALSE, length(x))
  } else {
    !is.na(nms) & nms != ""
  }
}
```

This function takes advantage of the standard return rule: a function returns the last value that it computed. Here that is either one of the two branches of the `if` statement.

### Conditions

The `condition` should be either a single `TRUE` or a single `FALSE`. If it's a vector, you'll get a warning message; if it's an `NA`, you'll get an error. Watch out for these messages in your own code:

```{r, error = TRUE}
if (c(TRUE, FALSE)) {}

if (NA) {}
```

You can use `||` (or) and `&&` (and) to combine multiple logical expressions. These operators are "short-circuiting": as soon as `||` sees the first `TRUE` it returns `TRUE` without computing anything else. As soon as `&&` sees the first `FALSE` it returns `FALSE`. You should never use `|` or `&` in an `if` statement: these are vectorised operations that apply to multiple values. If you do have a logical vector, you can use `any()` or `all()` to collapse it to a single value.

You can enforce this more-strictly by using the `identical()` function, which returns either a single `TRUE` or a single `FALSE`. One thing to watch out for is that *you* have to be more strict when specifying integers:

```{r}
if (i == 0){}

if (identical(i, 0L)){}
```

### Multiple conditions

You can chain multiple if statements together:

```{r, eval = FALSE}
if (this) {
  # do that
} else if (that) {
  # do something else
} else {
  # 
}
```

But note that if you end up with a very long series of chained `if` statements, you should consider rewriting. One useful technique is the `switch()` function. It allows you to evaluate selected code based on position or name. Note that neither `if` nor `switch()` is vectorised: they work with a single value at a time. 

```{r}
function(x, y, op) {
  switch(op,
    plus = x + y,
    minus = x - y,
    times = x * y,
    divide = x / y,
    stop("Unknown op!")
  )
}
```

Another useful function that can often eliminate long chains of `if` statements is `cut()`. It's used to discretise continuous variables.

### If styles

Squiggly brackets are optional (for both `if` and `function`), but highly recommended. When coupled with good style (described below), this makes it easier to see the hierarchy in your code. You can easily see how the code is nested by skimming the left-hand margin.

An opening curly brace should never go on its own line and should always be followed by a new line. A closing curly brace should always go on its own line, unless it's followed by `else`. Always indent the code inside curly braces.

```{r, eval = FALSE}
# Good
if (y < 0 && debug) {
  message("Y is negative")
}

if (y == 0) {
  log(x)
} else {
  y ^ x
}

# Bad
if (y < 0 && debug)
message("Y is negative")

if (y == 0) {
  log(x)
} 
else {
  y ^ x
}
```

It's ok to drop the curly braces if you have a very short `if `statement that can fit on one line:

```{r}
y <- 10
x <- if (y < 20) "Too low" else "Too high"
```

I recommend this only for very brief `if` statements. Otherwise, the full form is easier to read:

```{r}
if (y < 20) {
  x <- "Too low" 
} else {
  x <- "Too high"
}
```

### Exercises

1.  What's the difference between `if` and `ifelse()`? Carefully read the help
    and construct three examples that illustrate the key differences.

1.  Write a greeting function that says "good morning", "good afternoon",
    or "good evening", depending on the time of day. (Hint: use a time
    argument that defaults to `lubridate::now()`. That will make it 
    easier to test your function.)

1.  How could you use `cut()` to simplify this set of nested if-else statements?

    ```{r, eval = FALSE}
    if (temp <= 0) {
      "freezing"
    } else if (temp <= 10) {
      "cold"
    } else if (temp <= 20) {
      "cool"
    } else if (temp <= 30) {
      "warm"
    } else {
      "hot"
    }
    ```
    
    How would you change the call to `cut()` if I'd used `<` instead of `<=`?
    What are the advantages of `cut()` for this type of problem?

1.  What happens if you use `switch()` with numeric values?

1.  What does this `switch()` call do?

    ```{r}
    switch(x, 
      a = ,
      b = "ab",
      c = ,
      d = "cd"
    )
    ```

## Function arguments

The arguments to a function typically fall into two broad sets: one set supplies the data to compute on, and the other supplies arguments that controls the details of the computation. For example:

* In `log()`, the data is `x`, and the detail is the `base` of the logarithm.

* In `mean()`, the data is `x`, and the details are the `trim` and how to 
  handle missing values (`na.rm`).

* In `t.test()`, the data is `x` and `y`, and the details of the test are
  `alternative`, `mu`, `paired`, `var.equal`, and `conf.level`.
  
* In `paste()` you can supply any number of strings to `...`, and the details
  of the concatenation are controlled by `sep` and `collapse`.
  
Generally, data arguments should come first. Detail arguments should go on the end, and usually should have default values. You specify a default value in the same way you call a function with a named argument:

```{r}
# Compute confidence interval around mean using normal approximation
mean_ci <- function(x, conf = 0.95) {
  se <- sd(x) / sqrt(length(x))
  alpha <- 1 - conf
  mean(x) + se * qnorm(c(alpha / 2, 1 - alpha / 2))
}

x <- runif(100)
mean_ci(x)
mean_ci(x, 0.99)
```

The default value should almost always be the most common value. There are a few exceptions to do with safety. For example, it makes sense for `na.rm` to default to `FALSE` because missing values are important. Even though `na.rm = TRUE` is what you usually put in your code, it's a bad idea to silently ignore missing values by default.

When you call a function, typically you can omit the names for the data arguments (because they are used so commonly). If you override the default value of a detail argument, you should use the full name:

```{r, eval = FALSE}
# Good
mean(1:10, na.rm = TRUE)

# Bad
mean(x = 1:10, , FALSE)
mean(, TRUE, x = c(1:10, NA))
```

You can refer to an argument by its unique prefix (e.g. `mean(x, n = TRUE)`), but this is generally best avoided given the possibilities for confusion.

Notice that when you call a function, you should place a space around `=` in function calls, and always put a space after a comma, not before (just like in regular English). Using whitespace makes it easier to skim the function for the important components.

```{r, eval = FALSE}
# Good
average <- mean(feet / 12 + inches, na.rm = TRUE)

# Bad
average<-mean(feet/12+inches,na.rm=TRUE)
```

### Choosing names

The names of the arguments are also important. R doesn't care, but the readers of your code (including future you!) will find your code easier to understand. Generally you should prefer longer, more descriptive names, but there are a handful of very common, very short names. It's worth memorising these:

* `x`, `y`, `z`: vectors.
* `w`: a vector of weights.
* `df`: a data frame.
* `i`, `j`: numeric indices (typically rows and columns).
* `n`: length, or number of rows.
* `p`: number of columns.

Otherwise, consider matching names of arguments in existing R functions. For example, always use `na.rm` to determine if missing values should be removed.

### Checking values

As you start to write more functions, you'll eventually get to the point where you don't remember exactly how your function works. At this point it's easier to call your function with invalid inputs. To avoid this problem, it's often useful to make constraints explicit. For example, imagine you've written some functions for computing weighted summary statistics:

```{r}
wt_mean <- function(x, w) {
  sum(x * w) / sum(x)
}
wt_var <- function(x, w) {
  mu <- wt_mean(x, w)
  sum(w * (x - mu) ^ 2) / sum(w)
}
wt_sd <- function(x, w) {
  sqrt(wt_var(x, w))
}
```

What happens if `x` and `w` are not the same length?

```{r}
wt_mean(1:6, 1:3)
```

In this case, because of R's recycling rules, we don't get an error. 

It's good practice to check important preconditions, and throw an error (with `stop()`), if they are not true:

```{r}
wt_mean <- function(x, w) {
  if (length(x) != length(w)) {
    stop("`x` and `w` must be the same length", call. = FALSE)
  }
  sum(w * x) / sum(x)
}
```

Be careful not to take this too far. There's a tradeoff between how much time you spend making your function robust, versus how long you spend writing it. For example, if you also added a `na.rm` argument, I probably wouldn't check it carefully:

```{r}
wt_mean <- function(x, w, na.rm = FALSE) {
  if (!is.logical(na.rm)) {
    stop("`na.rm` must be logical")
  }
  if (length(na.rm) != 1) {
    stop("`na.rm` must be length 1")
  }
  if (length(x) != length(w)) {
    stop("`x` and `w` must be the same length", call. = FALSE)
  }
  
  if (na.rm) {
    miss <- is.na(x) | is.na(w)
    x <- x[!miss]
    w <- w[!miss]
  }
  sum(w * x) / sum(x)
}
```

This is a lot of extra work for little additional gain.

### Dot dot dot

There's one special argument you need to know about: `...`, pronounced dot-dot-dot. This captures any other arguments not otherwise matched. It's useful because you can then send those `...` on to another function. This is a useful catch-all if your function primarily wraps another function.

For example, I commonly create these helper functions that wrap around `paste()`:

```{r}
commas <- function(...) paste0(..., collapse = ", ")
commas(letters[1:10])

rule <- function(..., pad = "-") {
  title <- paste0(...)
  width <- getOption("width") - nchar(title) - 5
  cat(title, " ", paste(rep(pad, width, collapse = "")), "\n", sep = "")
}
rule("Important output")
```

Here `...` lets me forward on any arguments that I don't want to deal with to `paste()`. It's a very convenient technique. But it does came at a price: any misspelled arguments will not raise an error. This makes it easy for typos to go unnoticed:

```{r}
x <- c(1, 2)
sum(x, na.mr = TRUE)
```

If you just want to get the values of the `...`, use `list(...)`.

### Lazy evaluation

Arguments in R are lazily evaluated: they're not computed until they're needed. That means if they're never used, they're never called. This is an important property of R as a programming language, but is generally not important for data analysis. You can read more about lazy evaluation at <http://adv-r.had.co.nz/Functions.html#lazy-evaluation>

### Exercises

1.  What does `commas(letters, collapse = "-")` do? Why?

1.  It'd be nice if you supply multiple characters to the `pad` argument, e.g.
    `rule("Title", pad = "-+")`. Why doesn't this currently work? How could you
    fix it?
    
1.  What does the `trim` argument to `mean()` do? When might you use it?

1.  The default value for the `method` argument to `cor()` is 
    `c("pearson", "kendall", "spearman")`. What does that mean? What 
    value is used by default?

## Return values

Figuring out what your function should return is usually straightforward: it's why you created the function in the first place! There are two things you should consider when returning a value: Does returning early make your function easier to read? And can you make your function pipeable?

### Explicit return statements

The value returned by the function is the usually the last statement it evaluates, but you choose to return early by using `return()`. I think it's best to save the use of `return()` to signal that you can return early with a simpler solution. A common reason to do this is because the inputs are empty:

```{r}
complicated_function <- function(x, y, z) {
  if (length(x) == 0 || length(y) == 0) {
    return(0)
  }
    
  # Complicated code here
}

```

Another reason is becuase you have a `if` statement with one complex block and one simple block. For example, you might write an if statement like this:

```{r, eval = FALSE}
f <- function() {
  if (x) {
    # Do 
    # something
    # that
    # takes
    # many
    # lines
    # to
    # express
  } else {
    # return something short
  }
}
```

But if the first block is very long, by the time you get to the else, you've forgotten what's going on. One way to rewrite it is to use an early return for the simple case:

```{r, eval = FALSE}

f <- function() {
  if (!x) {
    return(something_short)
  }

  # Do 
  # something
  # that
  # takes
  # many
  # lines
  # to
  # express
}
```

This tends to make the code easier to understand, because you don't need quite so much context to understand it.

### Writing pipeable functions

If you want to write your own pipeable functions, thinking the return value is key. There are two key pipes of pipeable functions.

In __transformation__ functions, there's a clear "key" object that is passed in as the first argument, and a modified version is returned by the function. For example, the key objects for dplyr and tidyr are data frames. If you can identify what the object type is for your domain, you'll find that your functions just work in a pipe.

__Side-effect__ functions, however, are primarily called to perform an action, like drawing a plot or saving a file, not transforming an object. These functions should "invisibly" return the first argument, so they're not printed by default, but can still be used in a pipeline. For example, this simple function that prints out the number of missing values in a data frame:

```{r}
show_missings <- function(df) {
  n <- sum(is.na(df))
  cat("Missing values: ", n, "\n", sep = "")
  
  invisible(df)
}
```

If we call it interactively, the `invisible()` means that the input `df` doesn't get printed out:

```{r}
show_missings(mtcars)
```

But it's still there, it's just not printed by default:

```{r}
x <- show_missings(mtcars) 
class(x)
dim(x)
```

But we can still use it in a pipeline:

```{r, include = FALSE}
library(dplyr)
```

```{r}
mtcars %>% 
  show_missings() %>% 
  mutate(mpg = ifelse(mpg < 20, NA, mpg)) %>% 
  show_missings() 
```

## Environment

The last component of a function is it's environment. This is not something you need to understand deeply when you first start writing functions. However, it's important to know a little bit about environments because they are crucial to how functions work. The environment of a function controls how R finds the value associated with a name. For example, take this function:

```{r}
f <- function(x) {
  x + y
} 
```

In many programming languages, this would be an error, because `y` is not defined inside the function. In R, this is valid code because R uses rules called _lexical scoping_ to find the value associated with a name. Since `y` is not defined inside the function, R will look in the _environment_ where the function was defined:

```{r}
y <- 100
f(10)

y <- 1000
f(10)
```

This behaviour seems like a recipe for bugs, and indeed you should avoid creating functions like this deliberately, but by and large it doesn't cause too many problems (especially if you regularly restart R to get to a clean slate). 

The advantage of this behaviour is that from a language standpoint it allows R to be very consistent. Every name is looked up using the same set of rules. For `f()` that includes the behaviour of two things that you might not expect: `{` and `+`. This allows you to do devious things like:

```{r}
`+` <- function(x, y) {
  if (runif(1) < 0.1) {
    sum(x, y)
  } else {
    sum(x, y) * 1.1
  }
}
table(replicate(1000, 1 + 2))
rm(`+`)
```

This is a common phenomenon in R. R gives you a lot of control. You can do many things that are not possible in other programming languages. You can things that 99% of the time extremely ill-advised (like overriding how addition works!), but this power and flexibility is what makes tools like ggplot2 and dplyr possible. Learning how to make good use of this flexibility is beyond the scope of this book, but you can read about in "[Advanced R](http://adv-r.had.co.nz)".