This tool allows you to set keys, macros, and lighting for GK6X keyboards (GK64, GK84, GK61, etc). This can be used as an alternative to the official software (Windows / Mac)
It runs on Windows, Mac, and Linux.
Note: This is a CLI program, but see below for GUI. It's advisable to use the official software if you're on Windows / Mac.
Note: On Linux you will need to run it as super user (issue with hidraw?). It can be compiled / ran with mono on Linux / Mac (see #4). On Windows you compile it with Visual Studio.
When you open the program it will connect to your keyboard (there's no console output until it finds something to connect to).
Once it has connected it will create a file UserData/YOUR_MODEL_ID.txt. This can be used to configure the keyboard. See Sample.txt for examples of setting keys, macros, and lighting. Use the 'map' command to apply your changes to the keyboard, and 'unmap' to reset your keyboard to the default state (NOTE: There is no 'apply failed' message like there is on the official software, so it can fail silently!).
You can reprogram the base layer and layers 1-3 (and the Fn keys). The 'driver' layer isn't supported. The firmware doesn't allow you to reprogram the Fn keys on the base layer (which sucks!).
There's some very basic (and mostly untested) support for a web GUI by using the official software's web component. Use the 'gui' command to start the web server (it should automatically open the web page at http://127.0.0.1:6464).
Note: This repo doesn't contain the web files. Copy and paste the official software's folder into the "Build" folder, or use the pre-bundled version on the releases page.
Note: The GUI isn't capable of remapping keys on the base layer. Changes to the JavaScript would be required to get this working
https://github.com/wgwoods/gk64-python - thanks to @wgwoods for his work on annotating the dissasembly of the GK64 firmware.