title	description	ms.topic	ms.date	ms.assetid
Restore Azure Disks using Azure Data Protection REST API	In this article, learn how to restore Azure Disks using Azure Data protection REST API.	conceptual	10/06/2021	30f4e7ff-2a55-4a85-be44-55feedc24607

Restore Azure Disks using Azure Data Protection REST API

This article describes how to restore disks using Azure Backup.

Note

Currently, the Original-Location Recovery (OLR) option to restore by replacing the existing source disk (from where the backups were taken) isn't supported.
You can restore from a recovery point to create a new disk in the same resource group of the source disk or in any other resource group. It's known as Alternate-Location Recovery (ALR).

In this article, you'll learn how to:

Restore to create a new disk
Track the restore operation status

Prerequisites

Create a Backup vault
Create a disk backup policy
Configure a disk backup

In the example, we'll refer to an existing backup vault TestBkpVault, under the resource group testBkpVaultRG, where an Azure Disk is named msdiskbackup-2dc6eb5b-d008-4d68-9e49-7132d99da0ed.

Restore to create a new Azure Disk

Set up permissions

Backup vault uses managed identity to access other Azure resources. To restore from backup, Backup vault’s managed identity requires a set of permissions on the resource group where the disk needs to be restored.

Backup vault uses a system-assigned managed identity, which is restricted to one per resource and is tied to the lifecycle of this resource. To grant permissions to the managed identity, use the Azure role-based access control (Azure RBAC). Managed identity is a specific service principal that you may only use with Azure resources. Learn more about Managed Identities.

Assign the relevant permissions for vault's system-assigned managed identity on the target resource group where the disks will be restored/created. Learn more.

Fetch the list of recovery points

To list all the available recovery points for a backup instance, use the list recovery points API.

GET https://management.azure.com/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.DataProtection/backupVaults/{vaultName}/backupInstances/{backupInstanceName}/recoveryPoints?api-version=2021-01-01

For example, this API translates to:

GET https://management.azure.com/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/TestBkpVaultRG/providers/Microsoft.DataProtection/backupVaults/testBkpVault/backupInstances/msdiskbackup-2dc6eb5b-d008-4d68-9e49-7132d99da0ed/recoveryPoints?api-version=2021-01-01

Responses for list of recovery points

Once you submit the GET request, this returns response as 200 (OK) and the list of all discrete recovery points with all the relevant details.

Name	Type	Description
200 OK	AzureBackupRecoveryPointResourceList	OK
Other Status codes	CloudError	Error response describes the reason for the operation failure.

Example response for list of recovery points

HTTP/1.1 200 OK
Content-Length: 7550
Content-Type: application/json
Expires: -1
Pragma: no-cache
X-Content-Type-Options: nosniff
x-ms-request-id:
Strict-Transport-Security: max-age=31536000; includeSubDomains
x-ms-ratelimit-remaining-subscription-reads: 11999
x-ms-correlation-request-id: f01e2448-bdc5-4971-aee4-2edd1945c719
x-ms-routing-request-id: CENTRALUSEUAP:20210830T173435Z:0063423e-8b5e-493e-bb2e-74b7c7947c6c
Cache-Control: no-cache
Date: Mon, 30 Aug 2021 17:34:34 GMT
Server: Microsoft-IIS/10.0
X-Powered-By: ASP.NET

{
  "value": [
    {
      "id": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/TestBkpVaultRG/providers/Microsoft.DataProtection/backupVaults/testBkpVault/backupInstances/msdiskbackup-2dc6eb5b-d008-4d68-9e49-7132d99da0ed/recoveryPoints/a3d02fc3ab8a4c3a8cc26688c26d3356",
      "name": "a3d02fc3ab8a4c3a8cc26688c26d3356",
      "type": "Microsoft.DataProtection/backupVaults/backupInstances/recoveryPoints",
      "properties": {
        "objectType": "AzureBackupDiscreteRecoveryPoint",
        "recoveryPointId": "a3d02fc3ab8a4c3a8cc26688c26d3356",
        "recoveryPointTime": "2021-08-30T10:02:11.6354913Z",
        "recoveryPointType": "Incremental",
        "friendlyName": "119ac243-a789-4a41-be24-0461bceb3888",
        "recoveryPointDataStoresDetails": [
          {
            "id": "13e7c1fe-005d-4b80-8532-c58d937132bb",
            "type": "OperationalStore",
            "creationTime": "2021-08-30T10:02:11.6354913Z",
            "expiryTime": "2021-09-06T10:02:11.6354913Z",
            "metaData": null,
            "visible": true,
            "state": "COMMITTED",
            "rehydrationExpiryTime": null,
            "rehydrationStatus": null
          }
        ],
        "retentionTagName": "Default",
        "retentionTagVersion": "637607428336647408",
        "policyName": "DiskBackupPolicy-03",
        "policyVersion": null
      }
    },
    {
      "id": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/TestBkpVaultRG/providers/Microsoft.DataProtection/backupVaults/testBkpVault/backupInstances/msdiskbackup-2dc6eb5b-d008-4d68-9e49-7132d99da0ed/recoveryPoints/8f76ebc4c54847c09455d5785a150ce2",
      "name": "8f76ebc4c54847c09455d5785a150ce2",
      "type": "Microsoft.DataProtection/backupVaults/backupInstances/recoveryPoints",
      "properties": {
        "objectType": "AzureBackupDiscreteRecoveryPoint",
        "recoveryPointId": "8f76ebc4c54847c09455d5785a150ce2",
        "recoveryPointTime": "2021-08-29T10:01:50.7749008Z",
        "recoveryPointType": "Incremental",
        "friendlyName": "1ac5aa6b-3583-464f-9604-7490c04c2b22",
        "recoveryPointDataStoresDetails": [
          {
            "id": "13e7c1fe-005d-4b80-8532-c58d937132bb",
            "type": "OperationalStore",
            "creationTime": "2021-08-29T10:01:50.7749008Z",
            "expiryTime": "2021-09-05T10:01:50.7749008Z",
            "metaData": null,
            "visible": true,
            "state": "COMMITTED",
            "rehydrationExpiryTime": null,
            "rehydrationStatus": null
          }
        ],
        "retentionTagName": "Default",
        "retentionTagVersion": "637607428336647408",
        "policyName": "DiskBackupPolicy-03",
        "policyVersion": null
      }
    },
    .
    .
    .
    .
}

Select the relevant recovery points from the above list and proceed to prepare the restore request. We'll choose a recovery point named a3d02fc3ab8a4c3a8cc26688c26d3356 from the above list to restore.

Prepare the restore request

Construct the Azure Resource Manager (ARM) ID of the new disk to be created with the target resource group (to which permissions were assigned as detailed above) and the required disk name.

For example, we'll use a disk named APITestDisk2, under a resource group targetrg, present in the same region as the backed-up disk, but under a different subscription.

Construct the request body for restore request

The following request body contains the recovery point ID and the restore target details.

{
  "recoveryPointId": "a3d02fc3ab8a4c3a8cc26688c26d3356",
  "restoreRequestObject": {
    "objectType": "AzureBackupRecoveryPointBasedRestoreRequest",
    "sourceDataStoreType": "OperationalStore",
    "restoreTargetInfo": {
      "objectType": "restoreTargetInfo",
      "recoveryOption": "FailIfExists",
      "dataSourceInfo": {
        "objectType": "Datasource",
        "resourceID": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/targetrg/providers/Microsoft.Compute/disks/APITestDisk2",
        "resourceName": "APITestDisk2",
        "resourceType": "Microsoft.Compute/disks",
        "resourceLocation": "westUS",
        "resourceUri": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/targetrg/providers/Microsoft.Compute/disks/APITestDisk2",
        "datasourceType": "Microsoft.Compute/disks"
      },
      "restoreLocation": "westUS"
    }
  }
}

Validate restore requests

Once request body is prepared, validate it using the validate for restore API. Like validate for backup API, this is a POST operation.

POST https://management.azure.com/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.DataProtection/backupVaults/{vaultName}/backupInstances/{backupInstanceName}/validateRestore?api-version=2021-01-01

For example, this API translates to:

POST "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/TestBkpVaultRG/providers/Microsoft.DataProtection/backupVaults/testBkpVault/backupInstances/msdiskbackup-2dc6eb5b-d008-4d68-9e49-7132d99da0ed/validateRestore?api-version=2021-01-01"

Learn more about the request body for this POST API.

Request body to validate restore request

We have constructed a section of the same in the above section. Now, we'll add object type and use it to trigger a validate operation.

{
  "objectType": "ValidateRestoreRequestObject",
  "recoveryPointId": "a3d02fc3ab8a4c3a8cc26688c26d3356",
  "restoreRequestObject": {
    "objectType": "AzureBackupRecoveryPointBasedRestoreRequest",
    "sourceDataStoreType": "OperationalStore",
    "restoreTargetInfo": {
      "objectType": "restoreTargetInfo",
      "recoveryOption": "FailIfExists",
      "dataSourceInfo": {
        "objectType": "Datasource",
        "resourceID": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/targetrg/providers/Microsoft.Compute/disks/APITestDisk2",
        "resourceName": "APITestDisk2",
        "resourceType": "Microsoft.Compute/disks",
        "resourceLocation": "westUS",
        "resourceUri": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/targetrg/providers/Microsoft.Compute/disks/APITestDisk2",
        "datasourceType": "Microsoft.Compute/disks"
      },
      "restoreLocation": "westUS"
    }
  }
}

Response to validate restore requests

The validate restore request is an asynchronous operation. So, this operation creates another operation that needs to be tracked separately.

It returns two responses: 202 (Accepted) when another operation is created, and then 200 (OK) when that operation completes.

Name	Type	Description
200 OK		Status of validate request
202 Accepted		Accepted

Example response to restore validate request

Once the POST operation is submitted, it'll return the initial response as 202 (Accepted) with an Azure-asyncOperation header.

HTTP/1.1 202 Accepted
Content-Length: 0
Expires: -1
Pragma: no-cache
Retry-After: 10
Azure-AsyncOperation: https://management.azure.com/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/providers/Microsoft.DataProtection/locations/westus/operationStatus/ZmMzNDFmYWMtZWJlMS00NGJhLWE4YTgtMDNjYjI4Y2M5OTExOzVlNzMxZDBiLTQ3MDQtNDkzNS1hYmNjLWY4YWEzY2UzNTk1ZQ==?api-version=2021-01-01
X-Content-Type-Options: nosniff
x-ms-request-id:
Strict-Transport-Security: max-age=31536000; includeSubDomains
x-ms-ratelimit-remaining-subscription-writes: 1199
x-ms-correlation-request-id: bae60c92-669d-45a4-aed9-8392cca7cc8d
x-ms-routing-request-id: CENTRALUSEUAP:20210708T205935Z:f51db7a4-9826-4084-aa3b-ae640dc78af6
Cache-Control: no-cache
Date: Thu, 08 Jul 2021 20:59:35 GMT
Location: https://management.azure.com/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/providers/Microsoft.DataProtection/locations/westus/operationResults/ZmMzNDFmYWMtZWJlMS00NGJhLWE4YTgtMDNjYjI4Y2M5OTExOzVlNzMxZDBiLTQ3MDQtNDkzNS1hYmNjLWY4YWEzY2UzNTk1ZQ==?api-version=2021-01-01
X-Powered-By: ASP.NET

Track the Azure-AsyncOperation header with a simple GET request. When the request is successful, it returns 200 (OK) with a success status response.

 GET https://management.azure.com/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/providers/Microsoft.DataProtection/locations/westus/operationStatus/ZmMzNDFmYWMtZWJlMS00NGJhLWE4YTgtMDNjYjI4Y2M5OTExOzVlNzMxZDBiLTQ3MDQtNDkzNS1hYmNjLWY4YWEzY2UzNTk1ZQ==?api-version=2021-01-01

{
  "id": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/providers/Microsoft.DataProtection/locations/westus/operationStatus/ZmMzNDFmYWMtZWJlMS00NGJhLWE4YTgtMDNjYjI4Y2M5OTExOzVlNzMxZDBiLTQ3MDQtNDkzNS1hYmNjLWY4YWEzY2UzNTk1ZQ==",
  "name": "ZmMzNDFmYWMtZWJlMS00NGJhLWE4YTgtMDNjYjI4Y2M5OTExOzVlNzMxZDBiLTQ3MDQtNDkzNS1hYmNjLWY4YWEzY2UzNTk1ZQ==",
  "status": "Succeeded",
  "startTime": "2021-07-08T20:59:35.0060264Z",
  "endTime": "2021-07-08T20:59:57Z"
}

Trigger restore requests

The trigger restore operation is a POST API. Learn more about the trigger restore operation.

POST https://management.azure.com/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.DataProtection/backupVaults/{vaultName}/backupInstances/{backupInstanceName}/restore?api-version=2021-01-01

For example, the API translates to:

POST "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/TestBkpVaultRG/providers/Microsoft.DataProtection/backupVaults/testBkpVault/backupInstances/msdiskbackup-2dc6eb5b-d008-4d68-9e49-7132d99da0ed/restore?api-version=2021-01-01"

Create a request body for restore operations

Once the requests are validated, use the same request body to trigger the restore request with minor changes.

Example request body for restore

The only change from the validate restore request body is to remove the restoreRequest object at the start and change the object type.

{
  "objectType": "AzureBackupRecoveryPointBasedRestoreRequest",
  "recoveryPointId": "a3d02fc3ab8a4c3a8cc26688c26d3356",
  "sourceDataStoreType": "OperationalStore",
  "restoreTargetInfo": {
    "datasourceInfo": {
      "resourceID": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/targetrg/providers/Microsoft.Compute/disks/APITestDisk2",
      "resourceUri": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/targetrg/providers/Microsoft.Compute/disks/APITestDisk2",
      "datasourceType": "Microsoft.Compute/disks",
      "resourceName": "APITestDisk2",
      "resourceType": "Microsoft.Compute/disks",
      "resourceLocation": "westUS",
      "objectType": "Datasource"
    },
    "restoreLocation": "westUS",
    "recoveryOption": "FailIfExists",
    "objectType": "RestoreTargetInfo"
  }
}

Response to trigger restore requests

The trigger restore request is an asynchronous operation. So, this operation creates another operation that needs to be tracked separately.

It returns two responses: 202 (Accepted) when another operation is created, and then 200 (OK) when that operation completes.

Name	Type	Description
200 OK		Status of restore request
202 Accepted		Accepted

Example response to trigger restore request

Once the POST operation is submitted, it'll return the initial response as 202 (Accepted) with an Azure-asyncOperation header.

HTTP/1.1 202 Accepted
Content-Length: 0
Expires: -1
Pragma: no-cache
Retry-After: 30
Azure-AsyncOperation: https://management.azure.com/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/providers/Microsoft.DataProtection/locations/westus/operationStatus/ZmMzNDFmYWMtZWJlMS00NGJhLWE4YTgtMDNjYjI4Y2M5OTExO2Q1NDIzY2VjLTczYjYtNDY5ZC1hYmRjLTc1N2Q0ZTJmOGM5OQ==?api-version=2021-01-01
X-Content-Type-Options: nosniff
x-ms-request-id:
Strict-Transport-Security: max-age=31536000; includeSubDomains
x-ms-ratelimit-remaining-subscription-writes: 1197
x-ms-correlation-request-id: 8661209c-5b6a-44fe-b676-4e2b9c296593
x-ms-routing-request-id: CENTRALUSEUAP:20210708T204652Z:69e3fa4b-c5d9-4601-9410-598006ada187
Cache-Control: no-cache
Date: Thu, 08 Jul 2021 20:46:52 GMT
Location: https://management.azure.com/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/providers/Microsoft.DataProtection/locations/westus/operationResults/ZmMzNDFmYWMtZWJlMS00NGJhLWE4YTgtMDNjYjI4Y2M5OTExO2Q1NDIzY2VjLTczYjYtNDY5ZC1hYmRjLTc1N2Q0ZTJmOGM5OQ==?api-version=2021-01-01
X-Powered-By: ASP.NET

Track the Azure-AsyncOperation header with a simple GET request. When the request is successful, it'll return 200 (OK) with a job ID that should be further tracked for completion of restore request.

GET https://management.azure.com/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/providers/Microsoft.DataProtection/locations/westus/operationStatus/ZmMzNDFmYWMtZWJlMS00NGJhLWE4YTgtMDNjYjI4Y2M5OTExO2Q1NDIzY2VjLTczYjYtNDY5ZC1hYmRjLTc1N2Q0ZTJmOGM5OQ==?api-version=2021-01-01

{
  "id": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/providers/Microsoft.DataProtection/locations/westus/operationStatus/ZmMzNDFmYWMtZWJlMS00NGJhLWE4YTgtMDNjYjI4Y2M5OTExO2Q1NDIzY2VjLTczYjYtNDY5ZC1hYmRjLTc1N2Q0ZTJmOGM5OQ==",
  "name": "ZmMzNDFmYWMtZWJlMS00NGJhLWE4YTgtMDNjYjI4Y2M5OTExO2Q1NDIzY2VjLTczYjYtNDY5ZC1hYmRjLTc1N2Q0ZTJmOGM5OQ==",
  "status": "Succeeded",
  "startTime": "2021-07-08T20:46:52.4110868Z",
  "endTime": "2021-07-08T20:46:56Z",
  "properties": {
    "jobId": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/TestBkpVaultRG/providers/Microsoft.DataProtection/backupVaults/testBkpVault/backupJobs/c4bd49a1-0645-4eec-b207-feb818962852",
    "objectType": "OperationJobExtendedInfo"
  }
}

Track jobs

The trigger restore requests triggered the restore job. To track the resultant Job ID, use the GET Jobs API.

Use the simple GET command to track the JobId present in the trigger restore response above.

 GET /subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/TestBkpVaultRG/providers/Microsoft.DataProtection/backupVaults/testBkpVault/backupJobs/c4bd49a1-0645-4eec-b207-feb818962852?api-version=2021-01-01

{
  "properties": {
    "activityID": "2881cc22-f527-4af4-9b34-46c6c7b72076-Ibz",
    "subscriptionId": "62b829ee-7936-40c9-a1c9-47a93f9f3965",
    "backupInstanceId": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/TestBkpVaultRG/providers/Microsoft.DataProtection/backupVaults/testBkpVault/backupInstances/msdiskbackup-2dc6eb5b-d008-4d68-9e49-7132d99da0ed",
    "policyId": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/TestBkpVaultRG/providers/Microsoft.DataProtection/backupVaults/testBkpVault/backupPolicies/DiskBackup-Policy",
    "dataSourceId": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/RG-DiskBackup/providers/Microsoft.Compute/disks/msdiskbackup",
    "vaultName": "testBkpVault",
    "backupInstanceFriendlyName": "msdiskbackup",
    "policyName": "DiskBackup-Policy",
    "sourceResourceGroup": "RG-DiskBackup",
    "dataSourceSetName": null,
    "dataSourceName": "msdiskbackup",
    "sourceDataStoreName": null,
    "destinationDataStoreName": null,
    "progressEnabled": false,
    "etag": "W/\"datetime'2021-08-26T07%3A18%3A16.157629Z'\"",
    "sourceSubscriptionID": "62b829ee-7936-40c9-a1c9-47a93f9f3965",
    "dataSourceLocation": "westUS",
    "startTime": "2021-08-26T07:12:09.940517Z",
    "endTime": "2021-08-26T07:18:15.6815066Z",
    "dataSourceType": "Microsoft.Compute/disks",
    "operationCategory": "Restore",
    "operation": "Restore",
    "status": "Completed",
    "restoreType": null,
    "isUserTriggered": true,
    "rehydrationPriority": null,
    "supportedActions": [
      ""
    ],
    "duration": "PT6M5.7409896S",
    "progressUrl": null,
    "errorDetails": null,
    "extendedInfo": {
      "backupInstanceState": null,
      "dataTransferedInBytes": null,
      "targetRecoverPoint": null,
      "sourceRecoverPoint": {
        "recoveryPointID": "3a512290ec6b43d6b9a644869f4a3b38",
        "recoveryPointTime": "2021-08-25T09:03:11.6889015Z"
      },
      "recoveryDestination": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/targetrg/providers/Microsoft.Compute/disks/APITestDisk2",
      "subTasks": [
        {
          "taskId": 1,
          "taskName": "Trigger Restore",
          "taskStatus": "Completed",
          "taskProgress": null,
          "additionalDetails": null
        }
      ],
      "additionalDetails": null
    }
  },
  "id": "/subscriptions/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxxx/resourceGroups/TestBkpVaultRG/providers/Microsoft.DataProtection/backupVaults/testBkpVault/backupJobs/3bc62c80-913f-47fa-b829-b7df476682be",
  "name": "3bc62c80-913f-47fa-b829-b7df476682be",
  "type": "Microsoft.DataProtection/BackupVaults/backupJobs"
}

The job status above indicates that the restore job is completed and the disks have been recovered to the specified subscription and target resource group.

Next steps

Overview of Azure Disk backup

For more information on the Azure Backup REST APIs, see the following articles:

Azure Data Protection provider REST API
Get started with Azure REST API

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

backup-azure-dataprotection-use-rest-api-restore-disks.md

backup-azure-dataprotection-use-rest-api-restore-disks.md

Restore Azure Disks using Azure Data Protection REST API

Prerequisites

Restore to create a new Azure Disk

Set up permissions

Fetch the list of recovery points

Responses for list of recovery points

Example response for list of recovery points

Prepare the restore request

Construct the request body for restore request

Validate restore requests

Request body to validate restore request

Response to validate restore requests

Example response to restore validate request

Trigger restore requests

Create a request body for restore operations

Example request body for restore

Response to trigger restore requests

Example response to trigger restore request

Track jobs

Next steps

Files

backup-azure-dataprotection-use-rest-api-restore-disks.md

Latest commit

History

backup-azure-dataprotection-use-rest-api-restore-disks.md

File metadata and controls

Restore Azure Disks using Azure Data Protection REST API

Prerequisites

Restore to create a new Azure Disk

Set up permissions

Fetch the list of recovery points

Responses for list of recovery points

Example response for list of recovery points

Prepare the restore request

Construct the request body for restore request

Validate restore requests

Request body to validate restore request

Response to validate restore requests

Example response to restore validate request

Trigger restore requests

Create a request body for restore operations

Example request body for restore

Response to trigger restore requests

Example response to trigger restore request

Track jobs

Next steps