CoreMidi4J

Core MIDI Service Provider Interface (SPI) for Java 1.7 and above on OS X.

Derek created CoreMidi4J as to our knowledge there is currently no Mac Java MIDI implementation under active development that properly supports sending System Exclusive messages, which still have not been fixed in the Java core distribution.

In collaboration with James, we added support for hot-swapping MIDI devices (the standard JAVA MIDI implementation will only recognize devices which were already connected when Java started), and proper support for inbound and outbound MIDI event timestamps, which can extend over network MIDI sessions thanks to CoreMIDI’s support for them.

Hopefully one day third-party SPIs like CoreMidi4J will not be required, but until then we are making this available.

For years we both used MMJ, but that appears to longer be under development and it does not work with later Java Runtimes. After looking around for a replacement, we decided it was necessary to create our own “lightweight” SPI, which Derek accomplished in 2015, and that we would make it publicly available for others to contribute to.

CoreMidi4J has been heavily used in some of our own projects for over a year, and we have recently resolved the last known outstanding issue, so we have labeled it version 1.0. Feedback on any new problems or issues is always welcome.

Installation

The recommended approach for use as a library is to embed CoreMidi4J in your project and have its native code loaded automatically when on the OS X platform, so that end users do not need to worry about installing anything.

It is also still possible to download and install CoreMidi4J separately, to use it with applications that did not embed it (or if your own project does not use the Maven dependency-management ecosystem).

Using CoreMidi4J

Once installed, if all you want to do is use the enhanced MIDI devices provided by CoreMidi4J, all you have to do is use the normal Java MIDI API, but choose CoreMidi4J’s device implementations instead of the ones provided by the native MIDI SPI. You will be able to identify them because their names will begin with CoreMidi4J -. These devices will:

• properly support System Exclusive messages,
• provide, translate, and respect CoreMidi timestamps on MIDI events, and
• the list of devices available will correctly update even if you connect or detach devices after Java is already running.

Checking CoreMidi4J's availability

If you would like to go further and filter out the non-working MIDI devices that exist on the Mac, or take advantage of CoreMidi4J’s ability to notify your code when the MIDI environment changes, you will need to access some of CoreMidi4J's classes directly. Unless you are embedding CoreMidi4J in your application and certain that you are running under Java 7 or later, you should use reflection to make sure that CoreMidi4J is available before trying to do this, or your application will fail to run in environments where CoreMidi4J's Java classes have not been loaded.

If you are embedding CoreMidi4J, the only reason you would need to check if it is available is if you might be running in Java 6 or earlier, because CoreMidi4J requires Java 7. If your project already requires Java 7 or later, and you have embedded CoreMidi4J, it is safe to assume that it is present, and you can skip to checking if the native library is active, and filtering out broken MIDI device implementations.

Here is an example of how to test whether CoreMidi4J is available. This class can safely be loaded on any system, and will check the environment to see if it is safe to try and load the class in the example that follows:

public class Available {

    public static void main(String[] args) throws Exception {
        try {
            Class deviceProviderClass = Class.forName(
                "uk.co.xfactorylibrarians.coremidi4j.CoreMidiDeviceProvider");
            System.out.println("CoreMIDI4J Java classes are available.");
            System.out.println("Working MIDI Devices:");
            for (javax.sound.midi.MidiDevice.Info device : Example.getWorkingDeviceInfo()) {
                System.out.println("  " + device);
            }
            if (Example.isCoreMidiLoaded()) {
                System.out.println("CoreMIDI4J native library is running.");
                Example.watchForMidiChanges();
                System.out.println("Watching for MIDI environment changes for thirty seconds.");
                Thread.sleep(30000);
            } else {
                System.out.println("CoreMIDI4J native library is not available.");
            }
        } catch (Exception e) {
            System.out.println("CoreMIDI4J Java classes are not available.");
        }
    }
}

Checking if CoreMidi4J is Active

This second class cannot be loaded on systems which lack the CoreMidi4J classes, but shows an example of how to ask for a list of only properly-working MIDI devices (filtering out the broken ones provided by the standard Mac OS X MIDI implementation). It also shows how to check whether the native library is available, and if it is, to ask to be notified whenever there is a change in the MIDI environment (in other words, a new device has become available, or an existing device has been removed):

import uk.co.xfactorylibrarians.coremidi4j.CoreMidiDeviceProvider;
import uk.co.xfactorylibrarians.coremidi4j.CoreMidiNotification;
import uk.co.xfactorylibrarians.coremidi4j.CoreMidiException;
import javax.sound.midi.MidiDevice;

public class Example {

    public static boolean isCoreMidiLoaded() throws CoreMidiException {
        return CoreMidiDeviceProvider.isLibraryLoaded();
    }

    public static void watchForMidiChanges() throws CoreMidiException {
        CoreMidiDeviceProvider.addNotificationListener(new CoreMidiNotification() {
                public void midiSystemUpdated() {
                    System.out.println("The MIDI environment has changed.");
                }
            });
    }

    public static MidiDevice.Info[] getWorkingDeviceInfo() {
        return CoreMidiDeviceProvider.getMidiDeviceInfo();
    }
}

Filtering Out Broken MIDI Devices

If your application runs on Macs as well as other platforms, you can ensure that your users only ever see MIDI devices whose implementations work properly, by using the getMidiDeviceInfo() method provided by uk.co.xfactorylibrarians.coremidi4j.CoreMidiDeviceProvider instead of the one in javax.sound.midi.MidiSystem. The CoreMidi4J version works on any platform. If you call it on anything but a Mac, it simply gives you the same result you would get from the standard method. On the Mac, it filters out any devices which have broken SysEx implementations, and returns the CoreMidi4J versions instead.

So to give your users the best experience possible, simply embed CoreMidi4J, and use its implementation of getMidiDeviceInfo() wherever you would otherwise have used the standard one, and your users will always only see working MIDI devices.

Here is an example of what running the Available class (listed above) on a Mac, with CoreMidi4J in the classpath, produces. Notice that other than the sequencer and synthesizer, the only MIDI devices returned are the inputs and outputs offered by CoreMidi4J:

java -cp coremidi4j-1.0.jar:. Available
CoreMIDI4J Java classes are available.
Working MIDI Devices:
  CoreMIDI4J - Bus 1
  CoreMIDI4J - Network
  CoreMIDI4J - Live Port
  CoreMIDI4J - User Port
  CoreMIDI4J - Traktor Virtual Output
  CoreMIDI4J - Bus 1
  CoreMIDI4J - Network
  CoreMIDI4J - Live Port
  CoreMIDI4J - User Port
  Gervill
  Real Time Sequencer
CoreMIDI4J native library is running.
Watching for MIDI environment changes for thirty seconds.
The MIDI environment has changed.
The MIDI environment has changed.

During the thirty seconds the code was running, a MIDI device was plugged in and later unplugged, demonstrating the fact that CoreMidi4J can adapt to changes in the MIDI environment, and notify the host application about them.

Embedding CoreMidi4J

If you want your project's users to be able to rely on a correct MIDI implementation on Mac OS X without having to install anything, you can embed CoreMidi4J and thereby make it automatically available. Releases are available through Maven Central.

It is safe to embed CoreMidi4J in cross-platform Java projects; the native library will be loaded only when needed, on Mac OS X, and the Java library will remain inactive on other platforms: it will not attempt to provide any MIDI devices, and its implementation of getMidiDeviceInfo() will simply delegate to the standard one.

If you are building a project with code like the examples above, you will need to configure CoreMidi4J as a dependency of your project. This will also enable build tools like Maven and Leiningen to build a consolidated Jar containing your own classes as well as those of CoreMidi4J, and any other libraries you depend on.

Click on the Maven Central link above, then the version you want to use, to see the configuration snippets you can use to add that version of CoreMidi4J as a dependency of your project in Maven, Gradle, Leiningen, or your build tool of choice.

Standalone CoreMidi4J

If you want to use CoreMidi4J with another Java program that does not embed it, or in a project of your own that does not use the Maven dependency management approach, you can download the standalone jar from the releases page.

Then simply place the CoreMidi4J jar on the classpath when that program runs, and CoreMidi4J's devices will be available to it.

Building CoreMidi4J

In order to build CoreMidi4J from source, in addition to cloning this repository, you will need to install Apple’s Xcode and Apache Maven. (We recommend using Homebrew to install Maven: once you have followed Homebrew’s own install instructions, simply run brew install maven to install Maven.)

Once you have Xcode and Maven, to build CoreMidi4J cd into the directory containing the Maven project specification pom.xml (you will find it in the CoreMidi4J subdirectory of your clone of this repository), and use normal Maven build commands. To build the standalone jar, for example,

cd CoreMidi4J/CoreMidi4J
mvn package

That will compile the Java classes, generate the JNI header, compile the native library, and build the standalone jar file which embeds everything needed at runtime, using the standard Maven location and naming convention of target/coremidi4j-{version}.jar (it also builds the source and javadoc jars needed for deployment to Maven Central).

Device Names

In release 1.1 we changed the way device names are reported to Java in order to accommodate situations where people have several of the same device attached to their system (see the Issue 21 discussion for details).

Previously, we would simply return the CoreMIDI "Endpoint" name as the device name. The problem with this is that the endpoint name for all identical devices would be the same, and there is no way for the user to edit them to distinguish between their devices.

Now, we instead return the CoreMIDI "Device" name associated with the endpoint as the Java MIDI device name. This device name can be edited by the user as described below to distinguish between their devices of the same type. And for devices that have multiple endpoints associated with them, for example a controller with different kinds of ports, we combine both the editable Device name followed by the non-editable Endpoint name.

To make this concrete, my Ableton Push 2 controller has two output ports, Live Port and User Port. Under previous releases of CoreMidi4J, these would show up in Java named simply Live Port and User Port, and there was no way to change them. In release 1.0 and later they show up as Ableton Push 2 Live Port and Ableton Push 2 User Port and the "Ableton Push 2" name can be changed to whatever I want using Audio Midi Setup as described below.

🔧 This means that if you update your application which embeds CoreMidi4J to use a current release and you were previously using release 1.0 or earlier, you may need to warn your users that their device names have likely changed, so they need to check and update their saved configuration settings appropriately.

If you need even more details about the device, the CoreMidiDeviceInfo class returned by CoreMidi4J to describe its devices has additional properties which provide access to CoreMIDI-specific device attributes. When you know you are dealing with a MidiDevice.Info object returned by CoreMidi4J, you can cast it into a CoreMidiDeviceInfo object and access this additional information.

Editing Device Names

Users can change the device names associated with their MIDI devices using Apple's Audio Midi Setup utility (found in the Utilities subfolder within your main Applications folder, unless you have moved it). Once the utility is launched, switch to the MIDI Studio window (using the Window menu to open it if needed):

To rename the very-generic "USB MIDI Device" shown at the bottom right of my MIDI Studio window, I can either double-click on it, or click once to select it and then click the Information button in the toolbar. That opens a Properties window where the device name can be edited:

When editing a device name like this, as soon as you click the Apply button in the Properties window, CoreMIDI4J will report a MIDI environment change event, and will use the newly assigned device name when reporting the connected MIDI devices. audio