Overview

This project is used to work with LittleVGL GUI Guider. The GUI Guider generated code is placed in the folder "generated". The example generated code shows a button in the panel.

SDK version

• Version: 2.14.0

Toolchain supported

• IAR embedded Workbench 9.40.2
• Keil MDK 5.38.1
• GCC ARM Embedded 12.2
• MCUXpresso 11.9.0

Hardware requirements

• Type-C USB cable
• FRDM-MCXN947 board
• TFT Proto 5" CAPACITIVE board by Mikroelektronika (www.mikroe.com) HW REV 1.01
• 3.5" TFT LCD module by NXP (P/N PAR-LCD-S035) Rev.A (optional with Mikroeletronika LCD)
• Personal Computer

Board settings

Attach the LCD shield to the FRDM board.

Prepare the Demo

1. Power the board using a micro USB cable connected to J2 USB port on the board, attach debugger to J5 connector
2. Add compiler macro BOARD_LCD_S035=1 to toolchain project if NXP 3.5" LCD is being used
3. Build the project.
4. Download the program to the target board.
5. Reset the SoC and run the project.

Running the demo

If this example runs correctly, the sample GUI is displayed.