Keyword Centric Network (KCN) is a kind of Information Centric Network (ICN). ICN is now well-known among network researchers as a major paradigm toward Future Internet. ICN, however, is still just a concept, and has not yet been defined what ICN is, and its implementation or applications are not unclear. We are now proposing KCN in order to present an actual implementation or applications of ICN.
One of basic concepts of KCN is naming information, which is similar to (but not exactly same as) one of an original concenpt of ICN. KCN separates a name of information into an identifier and a locator as same as ICN. An identifier of a name of information in KCN is, however, keywords combined with end users' attributes (e.g., current time, users' locations or nationalities) while one in ICN is a URI-like address of information. On the other hand, a locator of a name of information in KCN is URL (or URI) while one in ICN is an IP address. That is, KCN separate a name of information into keywords and URLs.
This package demonstrates how KCN works and what can be applications of KCN by providing an acutual implementation. We hope that this package could present an actual example of ICN in order to make ICN being in the wild.
First of all, build KCN binaries, and install them as follows:
1. install libevent, libcurl and jansson.
2. extract kcn-x.x.x.tar.gz, and move to extracted directry.
% tar xfz kcn-x.x.x.tar.gz
% cd kcn-x.x.x
3. If you check out source codes by git, please read *Tips for build
failures due to autoconf tools* section in this document.
4. run *configure* script.
% ./configure
5. build KCN binaries.
% make
6. install KCN binaries.
% sudo make install
7. run KCN database server, kcndbd.
% sudo /usr/local/sbin/kcndbd
Please see Installation examples section for actual examples in this document. When you need to specify other options for configure script, please consult with INSTALL file.
After installation succeeds, you can demonstrate to resolve locators from identifier in KCN, i.e. keywords, as follows:
% key2loc keyword1 keyword2 keyword3 keyword4 ...
result1
result2
result3
...
Current KCN library supports two database engines, KCN database engine and google searching engine. Database engine is automatically selected in accordance with input keywords. For examples,
% key2loc latency lt 100
this may choose KCN database, and search for a FQDN of a host that can be reached with a latency, 100 msec or less.
On the other hand,
% key2loc Kyushu Univ.
this may choose google database, and search for the URI of the Web page that matches keywords, Kyuhsu and Univ.
You can then try some applications using KCN framework as follows:
Example 1. ping
% ping `key2loc 'Kyushu Univ.'`
PING www.kyushu-u.ac.jp (133.5.5.119): 48 data bytes
64 bytes from 133.5.5.119: icmp_seq=0 ttl=56 time=29.140 ms
64 bytes from 133.5.5.119: icmp_seq=1 ttl=56 time=29.939 ms
64 bytes from 133.5.5.119: icmp_seq=2 ttl=56 time=29.826 ms
^C
----www.kyushu-u.ac.jp PING Statistics----
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 29.140/29.635/29.939/0.433 ms
Example 2. traceroute
% traceroute `key2loc 'Kyushu Univ.'`
traceroute to www.kyushu-u.ac.jp (133.5.5.119), 64 hops max, 40 byte packets
1 10.15.5.1 (10.15.5.1) 3.463 ms 1.592 ms 0.780 ms
2 *^C
Example 3. wget
% wget `key2loc -t uri Curry Tottori`
--2013-10-13 10:04:41-- http://tokyotombaker.wordpress.com/2013/09/07/around-japan-in-47-curries-tottori-nashi-pear/
Resolving tokyotombaker.wordpress.com (tokyotombaker.wordpress.com)... 192.0.80.250, 192.0.81.250, 66.155.9.238, ...
Connecting to tokyotombaker.wordpress.com (tokyotombaker.wordpress.com)|192.0.80.250|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: 'index.html'
[ <=> ] 51,707 146KB/s in 0.3s
2013-10-13 10:04:42 (146 KB/s) - 'index.html' saved [51707]
This KCN package uses autoconf tools. Autoconf tools are very useful from the viewpoint of developers. Autoconf tools may, however, cause build failures like below when you check out source codes of KCN by git:
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /home/kcn/missing aclocal-1.13
/home/kcn/missing: line 81: aclocal-1.13: command not found
WARNING: 'aclocal-1.13' is missing on your system.
You should only need it if you modified 'acinclude.m4' or
'configure.ac' or m4 files included by 'configure.ac'.
The 'aclocal' program is part of the GNU Automake package:
<http://www.gnu.org/software/automake>
It also requires GNU Autoconf, GNU m4 and Perl in order to run:
<http://www.gnu.org/software/autoconf>
<http://www.gnu.org/software/m4/>
<http://www.perl.org/>
make: *** [aclocal.m4] Error 127
These errors result from checks of autoconf tools to see if related files need to be regenerated or not. These checks are not necessary on building-only environment (i.e., non-developing environment), and should be skipped. These checks may, however, unnecessarily run when you check out source codes of KCN by git since git does not consider time stamps of related files. In order to skip these unnecessary checks, you need to change time stamps of related files in following order:
configure.ac (oldest timestamp)
acinclude.m4 ^
aclocal.m4 |
config.h.in |
Makefile.in |
kcndbd/Makefile.in |
kcndbctl/Makefile.in |
key2loc/Makefile.in |
lib/Makefile.in V
configure (newest timestamp)
To this end, you may open (or copy) each file in order, and just overwrite (or copy back) with no modifications.
This KCN implementation depends directly upon following libraries:
- pthread
- libevent
- libcurl
- jansson
Please make sure that these and related libraries are properly installed onto your environment.
Since jansson is quite new implementation of JSON parser at this moment, most of build errors may be brought by jansson installation. If you manually installed jansson into a directory, say /usr/local/, please try to run the configure script as follows:
Example 1.
% ./configure PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
If you still have some errors about others but jansson, you can examine the installation of curl as follows:
% curl-config --cflags --libs
If curl is properly installed, above command may produce below output:
-I/usr/pkg/include
-L/usr/pkg/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib \
-L/usr/pkg/lib -lcurl -lidn -lssl -lcrypto -lgssapi \
-lheimntlm -lkrb5 -lhx509 -lcom_err -lcrypto -lasn1 -lwind \
-lroken -lcrypt -lpthread -lz
If you cannot obtain above output (note that shown libraries depend upon your environment), please make sure that curl is properly installed.
When curl is properly installed but still the configure script fails, please make sure that pkg-config is properly installed and works well since the configure script uses pkg-config to obtain necessary information about libraries. Generally speaking, pkg-config may be properly installed onto your system because it is widely used in many cases.
When pkg-config cannot be installed or cannot work, you can manually specify necessary information about curl and jansson to the configure script as follows:
Example 2.
% ./configure \
CURL_CFLAGS=-I${ABS_CURL_DIR}/include \
CURL_LIBS="-L${ABS_CULR_DIR}/lib/ -lcurl" \
JANSSON_CFLAGS=-I${ABS_JANSSON_DIR}/include \
JANSSON_LIBS="-L${ABS_JANSSON_DIR}/lib/ -ljansson"
Example 3.
% ./configure \
CURL_CFLAGS=-I${ABS_CURL_DIR}/include \
CURL_LIBS="-L${ABS_CULR_DIR}/lib/ -lcurl" \
JANSSON_CFLAGS=-I${ABS_JANSSON_DIR}/include \
JANSSON_LIBS=${ABS_JANSSON_DIR}/lib/libjansson.a
Note that ABS_CURL_DIR and ABS_JANSSON_DIR denote absolute paths into which curl and jansson are installed, respectively.
pthread:
base system.
libevent:
1.4.12-stable already merged into base system.
pkg-config:
pkgsrc/devel/pkg-config
curl:
pkgsrc/www/curl
jansson:
pkgsrc/textproc/jansson
jansson has been firstly imported to pkgsrc on 2013/7/13.
If your pkgsrc does not have jansson, you may obtain the
source code of jansson-2.5 obtained:
http://www.digip.org/jansson/
pthread:
base system.
libevent:
libevent-devel (1.4.13-stable)
pkg-config:
pkgconfig (1:0.23-9.1.el6): installed by default as a base tool
curl:
libcurl-devel (7.19.7-37.el6_4)
jansson:
jansson-2.5 obtained from http://www.digip.org/jansson/
% cd /usr/pkgsrc/devel/pkg-config && make update
% cd /usr/pkgsrc/www/curl && make update
% cd /usr/pkgsrc/textproc/jansson && make update
% sudo mkdir -p /usr/local/src
% sudo chown yourusername /usr/local/src
% cd /usr/local/src
% git clone https://github.com/ohmori7/kcn.git
% cd /usr/local/src/kcn
% ./configure
% make
% sudo make install
% sudo yum install libevent-devel
% sudo yum install pkgconfig
% sudo yum install libcurl-devel
% sudo mkdir -p /usr/local/src
% sudo chown yourusername /usr/local/src
% cd /usr/local/src
% wget http://www.digip.org/jansson/releases/jansson-2.5.tar.gz
% tar xvfz jansson-2.5.tar.gz
% cd /usr/local/src/jansson-2.5
% ./configure
% make
% sudo make install
% cd /usr/local/src
% git clone https://github.com/ohmori7/kcn.git
% cd /usr/local/src/kcn
% ./configure PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
% make
% sudo make install