Merge tag 'platform-drivers-x86-v4.15-1' of git://git.infradead.org/l…

…inux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:
 "Here is the collected material against Platform Drivers x86 subsystem.
  It's rather bit busy cycle for PDx86, mostly due to Dell SMBIOS driver
  activity

  For this cycle we have quite an update for the Dell SMBIOS driver
  including WMI work to provide an interface for SMBIOS tokens via sysfs
  and WMI support for 2017+ Dell laptop models. SMM dispatcher code is
  split into a separate driver followed by a new WMI dispatcher. The
  latter provides a character device interface to user space.

  The git history also contains a merge of immutable branch from Wolfram
  Sang in order to apply a dependent fix to the Intel CherryTrail
  Battery Management driver.

  Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0
  support is added for Intel Skylake.

  Peaq WMI hotkeys driver gets its own maintainer and white list of
  supported models.

  Silead DMI is expanded to support few additional platforms.

  Tablet mode via GMMS ACPI method is added to support some ThinkPad
  tablets.

  new driver:
   - Add driver to force WMI Thunderbolt controller power status

  asus-wmi:
   -  Add lightbar led support

  dell-laptop:
   -  Allocate buffer before rfkill use

  dell-smbios:
   -  fix string overflow
   -  Add filtering support
   -  Introduce dispatcher for SMM calls
   -  Add a sysfs interface for SMBIOS tokens
   -  only run if proper oem string is detected
   -  Prefix class/select with cmd_
   -  Add pr_fmt definition to driver

  dell-smbios-smm:
   -  test for WSMT

  dell-smbios-wmi:
   -  release mutex lock on WMI call failure
   -  introduce userspace interface
   -  Add new WMI dispatcher driver

  dell-smo8800:
   -  remove redundant assignments to byte_data

  dell-wmi:
   -  don't check length returned
   -  clean up wmi descriptor check
   -  increase severity of some failures
   -  Do not match on descriptor GUID modalias
   -  Label driver as handling notifications

  dell-*wmi*:
   -  Relay failed initial probe to dependent drivers

  dell-wmi-descriptor:
   -  check if memory was allocated
   -  split WMI descriptor into it's own driver

  fujitsu-laptop:
   -  Fix radio LED detection
   -  Don't oops when FUJ02E3 is not presnt

  hp_accel:
   -  Add quirk for HP ProBook 440 G4

  hp-wmi:
   -  Fix tablet mode detection for convertibles

  ideapad-laptop:
   -  Add Lenovo Yoga 920-13IKB to no_hw_rfkill dmi list

  intel_cht_int33fe:
   -  Update fusb302 type string, add properties
   -  make a couple of local functions static
   -  Work around BIOS bug on some devices

  intel-hid:
   -  Power button suspend on Dell Latitude 7275

  intel_ips:
   -  Convert timers to use timer_setup()
   -  Remove FSF address from GPL notice
   -  Remove unneeded fields and label
   -  Keep pointer to struct device
   -  Use PCI_VDEVICE() macro
   -  Switch to new PCI IRQ allocation API
   -  Simplify error handling via devres API

  intel_pmc_ipc:
   -  Revert Use MFD framework to create dependent devices
   -  Use MFD framework to create dependent devices
   -  Use spin_lock to protect GCR updates
   -  Use devm_* calls in driver probe function

  intel_punit_ipc:
   -  Fix resource ioremap warning

  intel_telemetry:
   -  Remove useless default in Kconfig
   -  Add needed inclusion
   -  cleanup redundant headers
   -  Fix typos
   -  Fix load failure info

  intel_telemetry_debugfs:
   -  Use standard ARRAY_SIZE() macro

  intel_turbo_max_3:
   -  Add Skylake platform

  intel-wmi-thunderbolt:
   -  Silence error cases

  mlx-platform:
   -  make a couple of structures static

  peaq_wmi:
   -  Fix missing terminating entry for peaq_dmi_table

  peaq-wmi:
   -  Remove unnecessary checks from peaq_wmi_exit
   -  Add DMI check before binding to the WMI interface
   -  Revert Blacklist Lenovo ideapad 700-15ISK
   -  Blacklist Lenovo ideapad 700-15ISK

  silead_dmi:
   -  Add silead, home-button property to some tablets
   -  Add entry for the Digma e200 tablet
   -  Fix GP-electronic T701 entry
   -  Add entry for the Chuwi Hi8 Pro tablet

  sony-laptop:
   -  Drop variable assignment in sony_nc_setup_rfkill()
   -  Fix error handling in sony_nc_setup_rfkill()

  thinkpad_acpi:
   -  Implement tablet mode using GMMS method

  tools/wmi:
   -  add a sample for dell smbios communication over WMI

  wmi:
   -  release mutex on module acquistion failure
   -  create userspace interface for drivers
   -  Don't allow drivers to get each other's GUIDs
   -  Add new method wmidev_evaluate_method
   -  Destroy on cleanup rather than unregister
   -  Cleanup exit routine in reverse order of init
   -  Sort include list"

* tag 'platform-drivers-x86-v4.15-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
  platform/x86: silead_dmi: Add silead, home-button property to some tablets
  platform/x86: dell-laptop: Allocate buffer before rfkill use
  platform/x86: dell-*wmi*: Relay failed initial probe to dependent drivers
  platform/x86: dell-wmi-descriptor: check if memory was allocated
  platform/x86: Revert intel_pmc_ipc: Use MFD framework to create dependent devices
  platform/x86: dell-smbios-wmi: release mutex lock on WMI call failure
  platform/x86: wmi: release mutex on module acquistion failure
  platform/x86: dell-smbios: fix string overflow
  platform/x86: intel_pmc_ipc: Use MFD framework to create dependent devices
  platform/x86: intel_punit_ipc: Fix resource ioremap warning
  platform/x86: dell-smo8800: remove redundant assignments to byte_data
  platform/x86: hp-wmi: Fix tablet mode detection for convertibles
  platform/x86: intel_ips: Convert timers to use timer_setup()
  platform/x86: sony-laptop: Drop variable assignment in sony_nc_setup_rfkill()
  platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()
  tools/wmi: add a sample for dell smbios communication over WMI
  platform/x86: dell-smbios-wmi: introduce userspace interface
  platform/x86: wmi: create userspace interface for drivers
  platform/x86: dell-smbios: Add filtering support
  platform/x86: dell-smbios-smm: test for WSMT
  ...

Documentation/ABI/testing/dell-smbios-wmi

@@ -0,0 +1,41 @@
+What:		/dev/wmi/dell-smbios
+Date:		November 2017
+KernelVersion:	4.15
+Contact:	"Mario Limonciello" <[email protected]>
+Description:
+		Perform SMBIOS calls on supported Dell machines.
+		through the Dell ACPI-WMI interface.
+
+		IOCTL's and buffer formats are defined in:
+		<uapi/linux/wmi.h>
+
+		1) To perform an SMBIOS call from userspace, you'll need to
+		first determine the minimum size of the calling interface
+		buffer for your machine.
+		Platforms that contain larger buffers can return larger
+		objects from the system firmware.
+		Commonly this size is either 4k or 32k.
+
+		To determine the size of the buffer read() a u64 dword from
+		the WMI character device /dev/wmi/dell-smbios.
+
+		2) After you've determined the minimum size of the calling
+		interface buffer, you can allocate a structure that represents
+		the structure documented above.
+
+		3) In the 'length' object store the size of the buffer you
+		determined above and allocated.
+
+		4) In this buffer object, prepare as necessary for the SMBIOS
+		call you're interested in.  Typically SMBIOS buffers have
+		"class", "select", and "input" defined to values that coincide
+		with the data you are interested in.
+		Documenting class/select/input values is outside of the scope
+		of this documentation. Check with the libsmbios project for
+		further documentation on these values.
+
+		6) Run the call by using ioctl() as described in the header.
+
+		7) The output will be returned in the buffer object.
+
+		8) Be sure to free up your allocated object.

Documentation/ABI/testing/sysfs-platform-dell-smbios

@@ -0,0 +1,21 @@
+What:		/sys/devices/platform/<platform>/tokens/*
+Date:		November 2017
+KernelVersion:	4.15
+Contact:	"Mario Limonciello" <[email protected]>
+Description:
+		A read-only description of Dell platform tokens
+		available on the machine.
+
+		Each token attribute is available as a pair of
+		sysfs attributes readable by a process with
+		CAP_SYS_ADMIN.
+
+		For example the token ID "5" would be available
+		as the following attributes:
+
+		0005_location
+		0005_value
+
+		Tokens will vary from machine to machine, and
+		only tokens available on that machine will be
+		displayed.

Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt

@@ -0,0 +1,11 @@
+What:		/sys/devices/platform/<platform>/force_power
+Date:		September 2017
+KernelVersion:	4.15
+Contact:	"Mario Limonciello" <[email protected]>
+Description:
+		Modify the platform force power state, influencing
+		Thunderbolt controllers to turn on or off when no
+		devices are connected (write-only)
+		There are two available states:
+		    * 0 -> Force power disabled
+		    * 1 -> Force power enabled

Documentation/admin-guide/thunderbolt.rst

@@ -221,3 +221,18 @@ The driver will create one virtual ethernet interface per Thunderbolt
 port which are named like ``thunderbolt0`` and so on. From this point
 you can either use standard userspace tools like ``ifconfig`` to
 configure the interface or let your GUI to handle it automatically.
+
+Forcing power
+-------------
+Many OEMs include a method that can be used to force the power of a
+thunderbolt controller to an "On" state even if nothing is connected.
+If supported by your machine this will be exposed by the WMI bus with
+a sysfs attribute called "force_power".
+
+For example the intel-wmi-thunderbolt driver exposes this attribute in:
+  /sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power
+
+  To force the power to on, write 1 to this attribute file.
+  To disable force power, write 0 to this attribute file.
+
+Note: it's currently not possible to query the force power state of a platform.

MAINTAINERS

@@ -384,6 +384,7 @@ ACPI WMI DRIVER
 L:	[email protected]
 S:	Orphan
 F:	drivers/platform/x86/wmi.c
+F:	include/uapi/linux/wmi.h
 
 AD1889 ALSA SOUND DRIVER
 M:	Thibaut Varene <[email protected]>
@@ -4030,6 +4031,26 @@ M:	"Maciej W. Rozycki" <[email protected]>
 S:	Maintained
 F:	drivers/net/fddi/defxx.*
 
+DELL SMBIOS DRIVER
+M:	Pali Rohár <[email protected]>
+M:	Mario Limonciello <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/platform/x86/dell-smbios.*
+
+DELL SMBIOS SMM DRIVER
+M:	Mario Limonciello <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/platform/x86/dell-smbios-smm.c
+
+DELL SMBIOS WMI DRIVER
+M:	Mario Limonciello <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/platform/x86/dell-smbios-wmi.c
+F:	tools/wmi/dell-smbios-example.c
+
 DELL LAPTOP DRIVER
 M:	Matthew Garrett <[email protected]>
 M:	Pali Rohár <[email protected]>
@@ -4059,12 +4080,17 @@ S:	Maintained
 F:	Documentation/dcdbas.txt
 F:	drivers/firmware/dcdbas.*
 
-DELL WMI EXTRAS DRIVER
+DELL WMI NOTIFICATIONS DRIVER
 M:	Matthew Garrett <[email protected]>
 M:	Pali Rohár <[email protected]>
 S:	Maintained
 F:	drivers/platform/x86/dell-wmi.c
 
+DELL WMI DESCRIPTOR DRIVER
+M:	Mario Limonciello <[email protected]>
+S:	Maintained
+F:	drivers/platform/x86/dell-wmi-descriptor.c
+
 DELTA ST MEDIA DRIVER
 M:	Hugues Fruchet <[email protected]>
 L:	[email protected]
@@ -7181,6 +7207,11 @@ F:	Documentation/wimax/README.i2400m
 F:	drivers/net/wimax/i2400m/
 F:	include/uapi/linux/wimax/i2400m.h
 
+INTEL WMI THUNDERBOLT FORCE POWER DRIVER
+M:	Mario Limonciello <[email protected]>
+S:	Maintained
+F:	drivers/platform/x86/intel-wmi-thunderbolt.c
+
 INTEL(R) TRACE HUB
 M:	Alexander Shishkin <[email protected]>
 S:	Supported
@@ -10630,6 +10661,12 @@ S:	Maintained
 F:	crypto/pcrypt.c
 F:	include/crypto/pcrypt.h
 
+PEAQ WMI HOTKEYS DRIVER
+M:	Hans de Goede <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/platform/x86/peaq-wmi.c
+
 PER-CPU MEMORY ALLOCATOR
 M:	Tejun Heo <[email protected]>
 M:	Christoph Lameter <[email protected]>

drivers/platform/x86/Kconfig

@@ -93,12 +93,33 @@ config ASUS_LAPTOP
 
 config DELL_SMBIOS
 	tristate
-	select DCDBAS
+
+config DELL_SMBIOS_WMI
+	tristate "Dell SMBIOS calling interface (WMI implementation)"
+	depends on ACPI_WMI
+	select DELL_WMI_DESCRIPTOR
+	default ACPI_WMI
+	select DELL_SMBIOS
+	---help---
+	This provides an implementation for the Dell SMBIOS calling interface
+	communicated over ACPI-WMI.
+
+	If you have a Dell computer from >2007 you should say Y or M here.
+	If you aren't sure and this module doesn't work for your computer
+	it just won't load.
+
+config DELL_SMBIOS_SMM
+	tristate "Dell SMBIOS calling interface (SMM implementation)"
+	depends on DCDBAS
+	default DCDBAS
+	select DELL_SMBIOS
 	---help---
-	This module provides common functions for kernel modules using
-	Dell SMBIOS.
+	This provides an implementation for the Dell SMBIOS calling interface
+	communicated over SMI/SMM.
 
-	If you have a Dell laptop, say Y or M here.
+	If you have a Dell computer from <=2017 you should say Y or M here.
+	If you aren't sure and this module doesn't work for your computer
+	it just won't load.
 
 config DELL_LAPTOP
 	tristate "Dell Laptop Extras"
@@ -116,11 +137,12 @@ config DELL_LAPTOP
 	laptops (except for some models covered by the Compal driver).
 
 config DELL_WMI
-	tristate "Dell WMI extras"
+	tristate "Dell WMI notifications"
 	depends on ACPI_WMI
 	depends on DMI
 	depends on INPUT
 	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	select DELL_WMI_DESCRIPTOR
 	select DELL_SMBIOS
 	select INPUT_SPARSEKMAP
 	---help---
@@ -129,6 +151,10 @@ config DELL_WMI
 	  To compile this driver as a module, choose M here: the module will
 	  be called dell-wmi.
 
+config DELL_WMI_DESCRIPTOR
+	tristate
+	depends on ACPI_WMI
+
 config DELL_WMI_AIO
 	tristate "WMI Hotkeys for Dell All-In-One series"
 	depends on ACPI_WMI
@@ -658,6 +684,19 @@ config WMI_BMOF
 	  To compile this driver as a module, choose M here: the module will
 	  be called wmi-bmof.
 
+config INTEL_WMI_THUNDERBOLT
+	tristate "Intel WMI thunderbolt force power driver"
+	depends on ACPI_WMI
+	default ACPI_WMI
+	---help---
+	  Say Y here if you want to be able to use the WMI interface on select
+	  systems to force the power control of Intel Thunderbolt controllers.
+	  This is useful for updating the firmware when devices are not plugged
+	  into the controller.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel-wmi-thunderbolt.
+
 config MSI_WMI
 	tristate "MSI WMI extras"
 	depends on ACPI_WMI
@@ -793,7 +832,7 @@ config ACPI_CMPC
 
 config INTEL_CHT_INT33FE
 	tristate "Intel Cherry Trail ACPI INT33FE Driver"
-	depends on X86 && ACPI && I2C
+	depends on X86 && ACPI && I2C && REGULATOR
 	---help---
 	  This driver add support for the INT33FE ACPI device found on
 	  some Intel Cherry Trail devices.
@@ -804,6 +843,10 @@ config INTEL_CHT_INT33FE
 	  This driver instantiates i2c-clients for these, so that standard
 	  i2c drivers for these chips can bind to the them.
 
+	  If you enable this driver it is advised to also select
+	  CONFIG_TYPEC_FUSB302=m, CONFIG_CHARGER_BQ24190=m and
+	  CONFIG_BATTERY_MAX17042=m.
+
 config INTEL_INT0002_VGPIO
 	tristate "Intel ACPI INT0002 Virtual GPIO driver"
 	depends on GPIOLIB && ACPI
@@ -1088,7 +1131,6 @@ config INTEL_PUNIT_IPC
 
 config INTEL_TELEMETRY
 	tristate "Intel SoC Telemetry Driver"
-	default n
 	depends on INTEL_PMC_IPC && INTEL_PUNIT_IPC && X86_64
 	---help---
 	  This driver provides interfaces to configure and use

drivers/platform/x86/Makefile

@@ -13,8 +13,11 @@ obj-$(CONFIG_MSI_LAPTOP)	+= msi-laptop.o
 obj-$(CONFIG_ACPI_CMPC)		+= classmate-laptop.o
 obj-$(CONFIG_COMPAL_LAPTOP)	+= compal-laptop.o
 obj-$(CONFIG_DELL_SMBIOS)	+= dell-smbios.o
+obj-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
+obj-$(CONFIG_DELL_SMBIOS_SMM)	+= dell-smbios-smm.o
 obj-$(CONFIG_DELL_LAPTOP)	+= dell-laptop.o
 obj-$(CONFIG_DELL_WMI)		+= dell-wmi.o
+obj-$(CONFIG_DELL_WMI_DESCRIPTOR)	+= dell-wmi-descriptor.o
 obj-$(CONFIG_DELL_WMI_AIO)	+= dell-wmi-aio.o
 obj-$(CONFIG_DELL_WMI_LED)	+= dell-wmi-led.o
 obj-$(CONFIG_DELL_SMO8800)	+= dell-smo8800.o
@@ -40,6 +43,7 @@ obj-$(CONFIG_PEAQ_WMI)		+= peaq-wmi.o
 obj-$(CONFIG_SURFACE3_WMI)	+= surface3-wmi.o
 obj-$(CONFIG_TOPSTAR_LAPTOP)	+= topstar-laptop.o
 obj-$(CONFIG_WMI_BMOF)		+= wmi-bmof.o
+obj-$(CONFIG_INTEL_WMI_THUNDERBOLT)	+= intel-wmi-thunderbolt.o
 
 # toshiba_acpi must link after wmi to ensure that wmi devices are found
 # before toshiba_acpi initializes